diff --git a/README.md b/README.md index 6c26ee7..91bda90 100644 --- a/README.md +++ b/README.md @@ -60,6 +60,10 @@ The current revision is **v1.1**. Open the print plate at [hardware/plastics/v1. Either use the included foam mounting squares (recommended), small nails (for drywall only), or two screws/anchors. It's very easy to install. +### Top mounted curtains + +We've developed a way to use Ropener with ceiling-mounted curtain tracks: print the [ceiling mount parts](hardware/plastics/v1.2.2/curtain) and the right size spacers, then screw the mounts through the spacers into the ceiling. We recommend fastening them into ceiling framing (joists or studs). See the [ceiling mounting instructions](hardware/README.md#ceiling-mounting-for-top-mounted-curtains) for the exact parts and spacer sizes. + ## Sending commands diff --git a/docs/wiki-Build-Guide.md b/docs/wiki-Build-Guide.md index d77bb58..97496d9 100644 --- a/docs/wiki-Build-Guide.md +++ b/docs/wiki-Build-Guide.md @@ -116,6 +116,7 @@ This device works on the following curtain types. | **Ring** | Good | May require glide tape. | | **Grommet** | OK | Requires glide tape. | | **Top-tab** | Likely great (untested) | Should behave like back-tab if similar. | +| **Ceiling-mounted curtain track** | Works with ceiling-mount parts | Print the [ceiling mounts and matching spacers](../hardware/README.md#ceiling-mounting-for-top-mounted-curtains); you may need to flip the carriages to reach the rope screws. | --- @@ -186,6 +187,8 @@ The **PTFE tubes come pre-cut** — no cutting needed. You'll have **two of each 2. **Mount the pulley (far side).** Zip-tie the pulley to the wall mount at the opposite end. 3. **Pick your curtain type** below and follow the matching steps. +> **Ceiling-mounted curtain tracks:** Use the printable ceiling mount versions of the pulley bottom and rope elbow top, plus spacers sized for your ceiling clearance, instead of zip-tying these parts to wall mounts. Screw them through the spacers into ceiling framing (joists or studs). You may need to flip the carriages around and route the rope "backwards" so you can reach the screws that secure the rope to the carriages. See [Ceiling mounting for top mounted curtains](../hardware/README.md#ceiling-mounting-for-top-mounted-curtains) for the parts and spacer generator. + ### Grommet - No extra parts — the whole carriage simply pushes against the grommets. - **Glide tape is usually required**, because grommets create too much friction. Glide tape is a thick plastic tape applied to the top of the rod that reduces friction. diff --git a/hardware/README.md b/hardware/README.md index a813a1b..a58b56d 100644 --- a/hardware/README.md +++ b/hardware/README.md @@ -7,6 +7,27 @@ The current hardware revision is **v1.1**. Print from [`hardware/plastics/v1.1`] The plastics changed slightly to suit the new tube lengths; otherwise assembly is the same. +## Ceiling mounting for top mounted curtains + +For curtains on a ceiling-mounted track, print these two v1.2.2 parts in place of the standard pulley bottom and rope elbow top: + +- [End pulley bottom ceiling mount](plastics/v1.2.2/curtain/end-pulley-bottom-ceiling-mount.step) +- [Rope elbow top ceiling mount](plastics/v1.2.2/curtain/rope-elbow-top-ceiling-mount.step) + +Print a matching spacer for each mount. Choose a thickness that positions the rope level with your curtain carriages. The [spacer generator](plastics/v1.2.2/curtain/make_mount_spacers.py) creates both spacer models as STEP and STL files; it needs Python with CadQuery installed. From the repository root, run for example: + +```sh +python hardware/plastics/v1.2.2/curtain/make_mount_spacers.py 40mm +``` + +This writes `end-pulley-ceiling-spacer-40mm.step` / `.stl` and `rope-elbow-ceiling-spacer-40mm.step` / `.stl` in the curtain parts folder. You can also pass an inch value such as `1.5in`; omitting the value defaults to `1.5in`. If the two mounts need different spacer thicknesses, run the generator once for each size and print the matching spacer from each run. + +The holes were sized for #9 screws: 4.7 mm through the ceiling mounts and 5.0 mm through the spacers. + +Place each spacer between its mount and the ceiling. Screw the mounts through the spacers into ceiling framing (joists or studs); we recommend fastening into framing rather than drywall alone. Use screws long enough to reach the framing after passing through the mount and spacer. + +You may need to flip the carriages around to reach the screws that secure the rope, then route the rope "backwards" relative to the standard installation so you can screw it into the carriages. + # Instructions Image build guide can be found [here](https://canva.link/tmpoyau5pfkddx3).\ Video build guide can be found [here](https://youtu.be/uowt6jLxNso).\ diff --git a/hardware/plastics/v1.2.2/curtain/end-pulley-bottom-ceiling-mount.step b/hardware/plastics/v1.2.2/curtain/end-pulley-bottom-ceiling-mount.step new file mode 100644 index 0000000..0198e99 --- /dev/null +++ b/hardware/plastics/v1.2.2/curtain/end-pulley-bottom-ceiling-mount.step @@ -0,0 +1,7757 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('Open CASCADE Model'),'2;1'); +FILE_NAME('Open CASCADE Shape Model','2026-07-19T09:10:59',('Author'),( + 'Open CASCADE'),'Open CASCADE STEP processor 7.7','Open CASCADE 7.7' + ,'Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('Open CASCADE STEP translator 7.7 5', + 'Open CASCADE STEP translator 7.7 5','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#6202); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.,0.,0.)); +#13 = DIRECTION('',(0.,0.,1.)); +#14 = DIRECTION('',(1.,0.,-0.)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#136,#376,#607,#767,#1221,#1270,#1537,#1587, + #1713,#1892,#1919,#1946,#1973,#2000,#2027,#2034,#2089,#2138,#2318, + #2462,#2511,#2747,#2795,#2897,#2951,#2998,#3071,#3120,#3171,#3299, + #3348,#3449,#3570,#3781,#3831,#3885,#3939,#3989,#4016,#4044,#4299, + #4306,#4356,#4363,#4411,#4418,#4655,#4854,#4882,#5081,#5130,#5287, + #5314,#5343,#5370,#5457,#5506,#5533,#5582,#5609,#5616,#5623,#5745, + #5751,#5783,#5814,#5869,#5901,#5933,#5961,#5989,#5998,#6025,#6052, + #6079,#6086,#6141,#6191,#6195)); +#17 = ADVANCED_FACE('',(#18),#32,.T.); +#18 = FACE_BOUND('',#19,.T.); +#19 = EDGE_LOOP('',(#20,#55,#83,#111)); +#20 = ORIENTED_EDGE('',*,*,#21,.F.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(7.259322901415,107.43621550726,-27.83509053063 + )); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(7.2593,107.43621550726,-27.83509053063)); +#26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.); +#27 = LINE('',#28,#29); +#28 = CARTESIAN_POINT('',(-6.340508800233,107.43621550726, + -27.83509053063)); +#29 = VECTOR('',#30,1.); +#30 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#31 = PCURVE('',#32,#37); +#32 = PLANE('',#33); +#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36); +#34 = CARTESIAN_POINT('',(-6.340508800172,107.43621550726, + -34.83509053063)); +#35 = DIRECTION('',(-5.844283390569E-15,1.,2.346507503525E-14)); +#36 = DIRECTION('',(1.152780867537E-15,2.346507503525E-14,-1.)); +#37 = DEFINITIONAL_REPRESENTATION('',(#38),#42); +#38 = LINE('',#39,#40); +#39 = CARTESIAN_POINT('',(-7.,6.092185830378E-11)); +#40 = VECTOR('',#41,1.); +#41 = DIRECTION('',(-5.699520040222E-29,1.)); +#42 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43 = PCURVE('',#44,#49); +#44 = PLANE('',#45); +#45 = AXIS2_PLACEMENT_3D('',#46,#47,#48); +#46 = CARTESIAN_POINT('',(-6.890508800255,109.93621547692, + -25.33509053063)); +#47 = DIRECTION('',(-3.31739324799E-15,0.707106781187,-0.707106781187)); +#48 = DIRECTION('',(-1.,-6.463114618791E-31,4.691502523032E-15)); +#49 = DEFINITIONAL_REPRESENTATION('',(#50),#54); +#50 = LINE('',#51,#52); +#51 = CARTESIAN_POINT('',(-0.550000000022,-3.53553388448)); +#52 = VECTOR('',#53,1.); +#53 = DIRECTION('',(1.,-8.265064833294E-15)); +#54 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#55 = ORIENTED_EDGE('',*,*,#56,.F.); +#56 = EDGE_CURVE('',#57,#22,#59,.T.); +#57 = VERTEX_POINT('',#58); +#58 = CARTESIAN_POINT('',(7.259322901415,107.43621550726,-35.33509053063 + )); +#59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.); +#60 = LINE('',#61,#62); +#61 = CARTESIAN_POINT('',(7.259322901415,107.43621550726,-35.33509053063 + )); +#62 = VECTOR('',#63,1.); +#63 = DIRECTION('',(4.733165431326E-30,-1.872812346352E-14,1.)); +#64 = PCURVE('',#32,#65); +#65 = DEFINITIONAL_REPRESENTATION('',(#66),#70); +#66 = LINE('',#67,#68); +#67 = CARTESIAN_POINT('',(0.5,-13.59983170158)); +#68 = VECTOR('',#69,1.); +#69 = DIRECTION('',(-1.,-1.152780867537E-15)); +#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#71 = PCURVE('',#72,#77); +#72 = PLANE('',#73); +#73 = AXIS2_PLACEMENT_3D('',#74,#75,#76); +#74 = CARTESIAN_POINT('',(7.259322901415,100.93621547692,-24.58517848885 + )); +#75 = DIRECTION('',(1.,-5.828670879206E-16,-1.272038209669E-29)); +#76 = DIRECTION('',(5.828670879206E-16,1.,2.346507503525E-14)); +#77 = DEFINITIONAL_REPRESENTATION('',(#78),#82); +#78 = LINE('',#79,#80); +#79 = CARTESIAN_POINT('',(6.500000030342,-10.74991204178)); +#80 = VECTOR('',#81,1.); +#81 = DIRECTION('',(4.736951571734E-15,1.)); +#82 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#83 = ORIENTED_EDGE('',*,*,#84,.F.); +#84 = EDGE_CURVE('',#85,#57,#87,.T.); +#85 = VERTEX_POINT('',#86); +#86 = CARTESIAN_POINT('',(7.2593,107.43621550726,-35.33509053063)); +#87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.); +#88 = LINE('',#89,#90); +#89 = CARTESIAN_POINT('',(5.859322901415,107.43621550726,-35.33509053063 + )); +#90 = VECTOR('',#91,1.); +#91 = DIRECTION('',(1.,0.,0.)); +#92 = PCURVE('',#32,#93); +#93 = DEFINITIONAL_REPRESENTATION('',(#94),#98); +#94 = LINE('',#95,#96); +#95 = CARTESIAN_POINT('',(0.5,-12.19983170158)); +#96 = VECTOR('',#97,1.); +#97 = DIRECTION('',(1.152780867537E-15,-1.)); +#98 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#99 = PCURVE('',#100,#105); +#100 = CYLINDRICAL_SURFACE('',#101,5.); +#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104); +#102 = CARTESIAN_POINT('',(-6.340508800061,102.43621550726, + -35.33509053063)); +#103 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#104 = DIRECTION('',(-3.31739324799E-15,0.707106781187,-0.707106781187) + ); +#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110); +#106 = LINE('',#107,#108); +#107 = CARTESIAN_POINT('',(5.497787143782,-12.19983170147)); +#108 = VECTOR('',#109,1.); +#109 = DIRECTION('',(2.368502407319E-16,-1.)); +#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#111 = ORIENTED_EDGE('',*,*,#112,.F.); +#112 = EDGE_CURVE('',#24,#85,#113,.T.); +#113 = SURFACE_CURVE('',#114,(#118,#124),.PCURVE_S1.); +#114 = LINE('',#115,#116); +#115 = CARTESIAN_POINT('',(7.2593,107.43621550726,-37.58509526531)); +#116 = VECTOR('',#117,1.); +#117 = DIRECTION('',(0.,2.346507503525E-14,-1.)); +#118 = PCURVE('',#32,#119); +#119 = DEFINITIONAL_REPRESENTATION('',(#120),#123); +#120 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#121,#122),.UNSPECIFIED.,.F.,.F., + (2,2),(-10.24999526531,-2.250004734681),.PIECEWISE_BEZIER_KNOTS.); +#121 = CARTESIAN_POINT('',(-7.499990530636,-13.59980880017)); +#122 = CARTESIAN_POINT('',(0.500000000001,-13.59980880017)); +#123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#124 = PCURVE('',#125,#130); +#125 = PLANE('',#126); +#126 = AXIS2_PLACEMENT_3D('',#127,#128,#129); +#127 = CARTESIAN_POINT('',(7.2593,103.15,-40.3351)); +#128 = DIRECTION('',(1.,0.,0.)); +#129 = DIRECTION('',(0.,0.,1.)); +#130 = DEFINITIONAL_REPRESENTATION('',(#131),#135); +#131 = LINE('',#132,#133); +#132 = CARTESIAN_POINT('',(2.750004734682,-4.286215507268)); +#133 = VECTOR('',#134,1.); +#134 = DIRECTION('',(-1.,-2.346507503525E-14)); +#135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#136 = ADVANCED_FACE('',(#137),#44,.T.); +#137 = FACE_BOUND('',#138,.T.); +#138 = EDGE_LOOP('',(#139,#162,#163,#185,#212,#239,#267,#322,#350)); +#139 = ORIENTED_EDGE('',*,*,#140,.T.); +#140 = EDGE_CURVE('',#141,#22,#143,.T.); +#141 = VERTEX_POINT('',#142); +#142 = CARTESIAN_POINT('',(7.259322901415,112.43621547692, + -22.83509053063)); +#143 = SURFACE_CURVE('',#144,(#148,#155),.PCURVE_S1.); +#144 = LINE('',#145,#146); +#145 = CARTESIAN_POINT('',(7.259322901415,107.87369348737, + -27.39761252019)); +#146 = VECTOR('',#147,1.); +#147 = DIRECTION('',(-4.121492703991E-16,-0.707106781187,-0.707106781187 + )); +#148 = PCURVE('',#44,#149); +#149 = DEFINITIONAL_REPRESENTATION('',(#150),#154); +#150 = LINE('',#151,#152); +#151 = CARTESIAN_POINT('',(-14.14983170167,-2.916846570322)); +#152 = VECTOR('',#153,1.); +#153 = DIRECTION('',(-2.90524397759E-15,-1.)); +#154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#155 = PCURVE('',#72,#156); +#156 = DEFINITIONAL_REPRESENTATION('',(#157),#161); +#157 = LINE('',#158,#159); +#158 = CARTESIAN_POINT('',(6.937478010447,-2.812434031337)); +#159 = VECTOR('',#160,1.); +#160 = DIRECTION('',(-0.707106781187,-0.707106781187)); +#161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#162 = ORIENTED_EDGE('',*,*,#21,.T.); +#163 = ORIENTED_EDGE('',*,*,#164,.F.); +#164 = EDGE_CURVE('',#165,#24,#167,.T.); +#165 = VERTEX_POINT('',#166); +#166 = CARTESIAN_POINT('',(7.2593,107.93620600756,-27.3351)); +#167 = SURFACE_CURVE('',#168,(#172,#178),.PCURVE_S1.); +#168 = LINE('',#169,#170); +#169 = CARTESIAN_POINT('',(7.2593,104.48965924035,-30.78164676721)); +#170 = VECTOR('',#171,1.); +#171 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#172 = PCURVE('',#44,#173); +#173 = DEFINITIONAL_REPRESENTATION('',(#174),#177); +#174 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175,#176),.UNSPECIFIED.,.F.,.F., + (2,2),(-4.874153181541,-4.167059813509),.PIECEWISE_BEZIER_KNOTS.); +#175 = CARTESIAN_POINT('',(-14.14980880025,-2.828440516448)); +#176 = CARTESIAN_POINT('',(-14.14980880025,-3.53553388448)); +#177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#178 = PCURVE('',#125,#179); +#179 = DEFINITIONAL_REPRESENTATION('',(#180),#184); +#180 = LINE('',#181,#182); +#181 = CARTESIAN_POINT('',(9.55345323279,-1.339659240356)); +#182 = VECTOR('',#183,1.); +#183 = DIRECTION('',(-0.707106781187,0.707106781187)); +#184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#185 = ORIENTED_EDGE('',*,*,#186,.F.); +#186 = EDGE_CURVE('',#187,#165,#189,.T.); +#187 = VERTEX_POINT('',#188); +#188 = CARTESIAN_POINT('',(2.2593,107.93620600756,-27.3351)); +#189 = SURFACE_CURVE('',#190,(#194,#200),.PCURVE_S1.); +#190 = LINE('',#191,#192); +#191 = CARTESIAN_POINT('',(-2.315604400127,107.93620600756,-27.3351)); +#192 = VECTOR('',#193,1.); +#193 = DIRECTION('',(1.,4.691502523032E-15,-0.)); +#194 = PCURVE('',#44,#195); +#195 = DEFINITIONAL_REPRESENTATION('',(#196),#199); +#196 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#197,#198),.UNSPECIFIED.,.F.,.F., + (2,2),(4.574904400127,9.574904400127),.PIECEWISE_BEZIER_KNOTS.); +#197 = CARTESIAN_POINT('',(-9.149808800255,-2.828440516448)); +#198 = CARTESIAN_POINT('',(-14.14980880025,-2.828440516448)); +#199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#200 = PCURVE('',#201,#206); +#201 = PLANE('',#202); +#202 = AXIS2_PLACEMENT_3D('',#203,#204,#205); +#203 = CARTESIAN_POINT('',(2.2593,103.15,-27.3351)); +#204 = DIRECTION('',(0.,0.,1.)); +#205 = DIRECTION('',(1.,0.,0.)); +#206 = DEFINITIONAL_REPRESENTATION('',(#207),#211); +#207 = LINE('',#208,#209); +#208 = CARTESIAN_POINT('',(-4.574904400127,4.786206007566)); +#209 = VECTOR('',#210,1.); +#210 = DIRECTION('',(1.,4.691502523032E-15)); +#211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#212 = ORIENTED_EDGE('',*,*,#213,.T.); +#213 = EDGE_CURVE('',#187,#214,#216,.T.); +#214 = VERTEX_POINT('',#215); +#215 = CARTESIAN_POINT('',(2.2593,107.43621550726,-27.83509053063)); +#216 = SURFACE_CURVE('',#217,(#221,#227),.PCURVE_S1.); +#217 = LINE('',#218,#219); +#218 = CARTESIAN_POINT('',(2.2593,104.48965924035,-30.78164676721)); +#219 = VECTOR('',#220,1.); +#220 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#221 = PCURVE('',#44,#222); +#222 = DEFINITIONAL_REPRESENTATION('',(#223),#226); +#223 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#224,#225),.UNSPECIFIED.,.F.,.F., + (2,2),(-4.874153181541,-4.167059813509),.PIECEWISE_BEZIER_KNOTS.); +#224 = CARTESIAN_POINT('',(-9.149808800255,-2.828440516448)); +#225 = CARTESIAN_POINT('',(-9.149808800255,-3.53553388448)); +#226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#227 = PCURVE('',#228,#233); +#228 = PLANE('',#229); +#229 = AXIS2_PLACEMENT_3D('',#230,#231,#232); +#230 = CARTESIAN_POINT('',(2.2593,103.15,-40.3351)); +#231 = DIRECTION('',(1.,0.,0.)); +#232 = DIRECTION('',(0.,0.,1.)); +#233 = DEFINITIONAL_REPRESENTATION('',(#234),#238); +#234 = LINE('',#235,#236); +#235 = CARTESIAN_POINT('',(9.55345323279,-1.339659240356)); +#236 = VECTOR('',#237,1.); +#237 = DIRECTION('',(-0.707106781187,0.707106781187)); +#238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#239 = ORIENTED_EDGE('',*,*,#240,.T.); +#240 = EDGE_CURVE('',#214,#241,#243,.T.); +#241 = VERTEX_POINT('',#242); +#242 = CARTESIAN_POINT('',(1.96457210581,107.43621550726,-27.83509053063 + )); +#243 = SURFACE_CURVE('',#244,(#248,#255),.PCURVE_S1.); +#244 = LINE('',#245,#246); +#245 = CARTESIAN_POINT('',(-6.340508800233,107.43621550726, + -27.83509053063)); +#246 = VECTOR('',#247,1.); +#247 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#248 = PCURVE('',#44,#249); +#249 = DEFINITIONAL_REPRESENTATION('',(#250),#254); +#250 = LINE('',#251,#252); +#251 = CARTESIAN_POINT('',(-0.550000000022,-3.53553388448)); +#252 = VECTOR('',#253,1.); +#253 = DIRECTION('',(1.,-8.265064833294E-15)); +#254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#255 = PCURVE('',#256,#261); +#256 = PLANE('',#257); +#257 = AXIS2_PLACEMENT_3D('',#258,#259,#260); +#258 = CARTESIAN_POINT('',(-6.340508800172,107.43621550726, + -34.83509053063)); +#259 = DIRECTION('',(-5.844283390569E-15,1.,2.346507503525E-14)); +#260 = DIRECTION('',(1.152780867537E-15,2.346507503525E-14,-1.)); +#261 = DEFINITIONAL_REPRESENTATION('',(#262),#266); +#262 = LINE('',#263,#264); +#263 = CARTESIAN_POINT('',(-7.,6.092185830378E-11)); +#264 = VECTOR('',#265,1.); +#265 = DIRECTION('',(-5.699520040222E-29,1.)); +#266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#267 = ORIENTED_EDGE('',*,*,#268,.T.); +#268 = EDGE_CURVE('',#241,#269,#271,.T.); +#269 = VERTEX_POINT('',#270); +#270 = CARTESIAN_POINT('',(-0.240592800216,109.47636392214, + -25.79494208542)); +#271 = SURFACE_CURVE('',#272,(#277,#288),.PCURVE_S1.); +#272 = ELLIPSE('',#273,3.127876947084,2.211743); +#273 = AXIS2_PLACEMENT_3D('',#274,#275,#276); +#274 = CARTESIAN_POINT('',(-0.240504400126,107.2646209239, + -28.00668508365)); +#275 = DIRECTION('',(3.31739324799E-15,-0.707106781187,0.707106781187)); +#276 = DIRECTION('',(-4.162625355963E-15,0.707106781187,0.707106781187) + ); +#277 = PCURVE('',#44,#278); +#278 = DEFINITIONAL_REPRESENTATION('',(#279),#287); +#279 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#280,#281,#282,#283,#284,#285 +,#286),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#280 = CARTESIAN_POINT('',(-6.650004400129,-0.650328302962)); +#281 = CARTESIAN_POINT('',(-2.819153150844,-0.650328302962)); +#282 = CARTESIAN_POINT('',(-4.734578775486,-5.342143723588)); +#283 = CARTESIAN_POINT('',(-6.650004400129,-10.03395914421)); +#284 = CARTESIAN_POINT('',(-8.565430024771,-5.342143723588)); +#285 = CARTESIAN_POINT('',(-10.48085564941,-0.650328302962)); +#286 = CARTESIAN_POINT('',(-6.650004400129,-0.650328302962)); +#287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#288 = PCURVE('',#289,#294); +#289 = CYLINDRICAL_SURFACE('',#290,2.211743); +#290 = AXIS2_PLACEMENT_3D('',#291,#292,#293); +#291 = CARTESIAN_POINT('',(-0.240504400126,107.2646209239, + -10.83526644707)); +#292 = DIRECTION('',(4.255784291194E-17,-9.59831506504E-16,-1.)); +#293 = DIRECTION('',(-5.844283390569E-15,1.,-9.59831506504E-16)); +#294 = DEFINITIONAL_REPRESENTATION('',(#295),#321); +#295 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#296,#297,#298,#299,#300,#301, + #302,#303,#304,#305,#306,#307,#308,#309,#310,#311,#312,#313,#314, + #315,#316,#317,#318,#319,#320),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(4.790050435378,4.857922019029, + 4.92579360268,4.993665186331,5.061536769982,5.129408353633, + 5.197279937284,5.265151520935,5.333023104585,5.400894688236, + 5.468766271887,5.536637855538,5.604509439189,5.67238102284, + 5.740252606491,5.808124190142,5.875995773792,5.943867357443, + 6.011738941094,6.079610524745,6.147482108396,6.215353692047, + 6.283225275698),.QUASI_UNIFORM_KNOTS.); +#296 = CARTESIAN_POINT('',(1.493134871801,16.999824068347)); +#297 = CARTESIAN_POINT('',(1.470511010584,16.949936104135)); +#298 = CARTESIAN_POINT('',(1.42526328815,16.85042592915)); +#299 = CARTESIAN_POINT('',(1.357391704499,16.702637029006)); +#300 = CARTESIAN_POINT('',(1.289520120849,16.557007232951)); +#301 = CARTESIAN_POINT('',(1.221648537198,16.414206543657)); +#302 = CARTESIAN_POINT('',(1.153776953547,16.274892685793)); +#303 = CARTESIAN_POINT('',(1.085905369896,16.139707127117)); +#304 = CARTESIAN_POINT('',(1.018033786245,16.009272379268)); +#305 = CARTESIAN_POINT('',(0.950162202594,15.884189063008)); +#306 = CARTESIAN_POINT('',(0.882290618943,15.765033160782)); +#307 = CARTESIAN_POINT('',(0.814419035292,15.652353359533)); +#308 = CARTESIAN_POINT('',(0.746547451642,15.546668525449)); +#309 = CARTESIAN_POINT('',(0.678675867991,15.448465314297)); +#310 = CARTESIAN_POINT('',(0.61080428434,15.358195930734)); +#311 = CARTESIAN_POINT('',(0.542932700689,15.276276045385)); +#312 = CARTESIAN_POINT('',(0.475061117038,15.203082882974)); +#313 = CARTESIAN_POINT('',(0.407189533387,15.1389534771)); +#314 = CARTESIAN_POINT('',(0.339317949736,15.084183148798)); +#315 = CARTESIAN_POINT('',(0.271446366085,15.039024032729)); +#316 = CARTESIAN_POINT('',(0.203574782434,15.003684341299)); +#317 = CARTESIAN_POINT('',(0.135703198784,14.978325819241)); +#318 = CARTESIAN_POINT('',(6.783161513274E-02,14.963068920249)); +#319 = CARTESIAN_POINT('',(2.258389269881E-02,14.959669742228)); +#320 = CARTESIAN_POINT('',(-3.996851814581E-05,14.959675638351)); +#321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#322 = ORIENTED_EDGE('',*,*,#323,.T.); +#323 = EDGE_CURVE('',#269,#324,#326,.T.); +#324 = VERTEX_POINT('',#325); +#325 = CARTESIAN_POINT('',(-0.240592800216,112.43621547692, + -22.83509053063)); +#326 = SURFACE_CURVE('',#327,(#331,#338),.PCURVE_S1.); +#327 = LINE('',#328,#329); +#328 = CARTESIAN_POINT('',(-0.240592800216,107.63246974781, + -27.63883625974)); +#329 = VECTOR('',#330,1.); +#330 = DIRECTION('',(-3.689144348898E-15,0.707106781187,0.707106781187) + ); +#331 = PCURVE('',#44,#332); +#332 = DEFINITIONAL_REPRESENTATION('',(#333),#337); +#333 = LINE('',#334,#335); +#334 = CARTESIAN_POINT('',(-6.649916000038,-3.257988454366)); +#335 = VECTOR('',#336,1.); +#336 = DIRECTION('',(7.006537596887E-15,1.)); +#337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#338 = PCURVE('',#339,#344); +#339 = PLANE('',#340); +#340 = AXIS2_PLACEMENT_3D('',#341,#342,#343); +#341 = CARTESIAN_POINT('',(-0.240592800216,100.97140847692, + -25.58526644707)); +#342 = DIRECTION('',(-1.,-6.28663787695E-15,1.069399905187E-15)); +#343 = DIRECTION('',(1.069399905187E-15,-2.346507503525E-14,1.)); +#344 = DEFINITIONAL_REPRESENTATION('',(#345),#349); +#345 = LINE('',#346,#347); +#346 = CARTESIAN_POINT('',(-2.053569812671,6.66106127089)); +#347 = VECTOR('',#348,1.); +#348 = DIRECTION('',(0.707106781187,0.707106781187)); +#349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#350 = ORIENTED_EDGE('',*,*,#351,.T.); +#351 = EDGE_CURVE('',#324,#141,#352,.T.); +#352 = SURFACE_CURVE('',#353,(#357,#364),.PCURVE_S1.); +#353 = LINE('',#354,#355); +#354 = CARTESIAN_POINT('',(-6.890508800255,112.43621547692, + -22.83509053063)); +#355 = VECTOR('',#356,1.); +#356 = DIRECTION('',(1.,5.844283390569E-15,1.152780867537E-15)); +#357 = PCURVE('',#44,#358); +#358 = DEFINITIONAL_REPRESENTATION('',(#359),#363); +#359 = LINE('',#360,#361); +#360 = CARTESIAN_POINT('',(3.215685996068E-14,3.535533905933)); +#361 = VECTOR('',#362,1.); +#362 = DIRECTION('',(-1.,8.265064833294E-15)); +#363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#364 = PCURVE('',#365,#370); +#365 = PLANE('',#366); +#366 = AXIS2_PLACEMENT_3D('',#367,#368,#369); +#367 = CARTESIAN_POINT('',(-7.440508800216,112.43621547692, + -22.81712767119)); +#368 = DIRECTION('',(-5.844283390569E-15,1.,2.346507503525E-14)); +#369 = DIRECTION('',(1.263803170001E-15,2.346507503525E-14,-1.)); +#370 = DEFINITIONAL_REPRESENTATION('',(#371),#375); +#371 = LINE('',#372,#373); +#372 = CARTESIAN_POINT('',(1.79628594411E-02,-0.549999999961)); +#373 = VECTOR('',#374,1.); +#374 = DIRECTION('',(1.110223024646E-16,-1.)); +#375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#376 = ADVANCED_FACE('',(#377,#576),#125,.T.); +#377 = FACE_BOUND('',#378,.T.); +#378 = EDGE_LOOP('',(#379,#409,#437,#470,#498,#527,#548,#549,#550)); +#379 = ORIENTED_EDGE('',*,*,#380,.F.); +#380 = EDGE_CURVE('',#381,#383,#385,.T.); +#381 = VERTEX_POINT('',#382); +#382 = CARTESIAN_POINT('',(7.2593,103.15,-40.3351)); +#383 = VERTEX_POINT('',#384); +#384 = CARTESIAN_POINT('',(7.2593,103.15,-40.28387944287)); +#385 = SURFACE_CURVE('',#386,(#390,#397),.PCURVE_S1.); +#386 = LINE('',#387,#388); +#387 = CARTESIAN_POINT('',(7.2593,103.15,-40.3351)); +#388 = VECTOR('',#389,1.); +#389 = DIRECTION('',(0.,0.,1.)); +#390 = PCURVE('',#125,#391); +#391 = DEFINITIONAL_REPRESENTATION('',(#392),#396); +#392 = LINE('',#393,#394); +#393 = CARTESIAN_POINT('',(0.,0.)); +#394 = VECTOR('',#395,1.); +#395 = DIRECTION('',(1.,0.)); +#396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#397 = PCURVE('',#398,#403); +#398 = PLANE('',#399); +#399 = AXIS2_PLACEMENT_3D('',#400,#401,#402); +#400 = CARTESIAN_POINT('',(2.2593,103.15,-40.3351)); +#401 = DIRECTION('',(0.,1.,0.)); +#402 = DIRECTION('',(0.,0.,1.)); +#403 = DEFINITIONAL_REPRESENTATION('',(#404),#408); +#404 = LINE('',#405,#406); +#405 = CARTESIAN_POINT('',(0.,5.)); +#406 = VECTOR('',#407,1.); +#407 = DIRECTION('',(1.,0.)); +#408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#409 = ORIENTED_EDGE('',*,*,#410,.T.); +#410 = EDGE_CURVE('',#381,#411,#413,.T.); +#411 = VERTEX_POINT('',#412); +#412 = CARTESIAN_POINT('',(7.2593,118.9862,-40.3351)); +#413 = SURFACE_CURVE('',#414,(#418,#425),.PCURVE_S1.); +#414 = LINE('',#415,#416); +#415 = CARTESIAN_POINT('',(7.2593,103.15,-40.3351)); +#416 = VECTOR('',#417,1.); +#417 = DIRECTION('',(0.,1.,0.)); +#418 = PCURVE('',#125,#419); +#419 = DEFINITIONAL_REPRESENTATION('',(#420),#424); +#420 = LINE('',#421,#422); +#421 = CARTESIAN_POINT('',(0.,0.)); +#422 = VECTOR('',#423,1.); +#423 = DIRECTION('',(0.,-1.)); +#424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#425 = PCURVE('',#426,#431); +#426 = PLANE('',#427); +#427 = AXIS2_PLACEMENT_3D('',#428,#429,#430); +#428 = CARTESIAN_POINT('',(2.2593,103.15,-40.3351)); +#429 = DIRECTION('',(0.,0.,1.)); +#430 = DIRECTION('',(1.,0.,0.)); +#431 = DEFINITIONAL_REPRESENTATION('',(#432),#436); +#432 = LINE('',#433,#434); +#433 = CARTESIAN_POINT('',(5.,0.)); +#434 = VECTOR('',#435,1.); +#435 = DIRECTION('',(0.,1.)); +#436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#437 = ORIENTED_EDGE('',*,*,#438,.F.); +#438 = EDGE_CURVE('',#439,#411,#441,.T.); +#439 = VERTEX_POINT('',#440); +#440 = CARTESIAN_POINT('',(7.2593,120.6862,-38.6351)); +#441 = SURFACE_CURVE('',#442,(#447,#458),.PCURVE_S1.); +#442 = CIRCLE('',#443,1.7); +#443 = AXIS2_PLACEMENT_3D('',#444,#445,#446); +#444 = CARTESIAN_POINT('',(7.2593,118.9862,-38.6351)); +#445 = DIRECTION('',(-1.,0.,-0.)); +#446 = DIRECTION('',(-0.,0.,1.)); +#447 = PCURVE('',#125,#448); +#448 = DEFINITIONAL_REPRESENTATION('',(#449),#457); +#449 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#450,#451,#452,#453,#454,#455 +,#456),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#450 = CARTESIAN_POINT('',(3.4,-15.8362)); +#451 = CARTESIAN_POINT('',(3.4,-18.78068637286)); +#452 = CARTESIAN_POINT('',(0.85,-17.30844318643)); +#453 = CARTESIAN_POINT('',(-1.7,-15.8362)); +#454 = CARTESIAN_POINT('',(0.85,-14.36395681356)); +#455 = CARTESIAN_POINT('',(3.4,-12.89171362713)); +#456 = CARTESIAN_POINT('',(3.4,-15.8362)); +#457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#458 = PCURVE('',#459,#464); +#459 = CYLINDRICAL_SURFACE('',#460,1.7); +#460 = AXIS2_PLACEMENT_3D('',#461,#462,#463); +#461 = CARTESIAN_POINT('',(2.2593,118.9862,-38.6351)); +#462 = DIRECTION('',(1.,0.,0.)); +#463 = DIRECTION('',(-0.,1.,0.)); +#464 = DEFINITIONAL_REPRESENTATION('',(#465),#469); +#465 = LINE('',#466,#467); +#466 = CARTESIAN_POINT('',(1.570796326795,5.)); +#467 = VECTOR('',#468,1.); +#468 = DIRECTION('',(-1.,0.)); +#469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#470 = ORIENTED_EDGE('',*,*,#471,.T.); +#471 = EDGE_CURVE('',#439,#472,#474,.T.); +#472 = VERTEX_POINT('',#473); +#473 = CARTESIAN_POINT('',(7.2593,120.6862,-29.0351)); +#474 = SURFACE_CURVE('',#475,(#479,#486),.PCURVE_S1.); +#475 = LINE('',#476,#477); +#476 = CARTESIAN_POINT('',(7.2593,120.6862,-40.3351)); +#477 = VECTOR('',#478,1.); +#478 = DIRECTION('',(0.,0.,1.)); +#479 = PCURVE('',#125,#480); +#480 = DEFINITIONAL_REPRESENTATION('',(#481),#485); +#481 = LINE('',#482,#483); +#482 = CARTESIAN_POINT('',(0.,-17.5362)); +#483 = VECTOR('',#484,1.); +#484 = DIRECTION('',(1.,0.)); +#485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#486 = PCURVE('',#487,#492); +#487 = PLANE('',#488); +#488 = AXIS2_PLACEMENT_3D('',#489,#490,#491); +#489 = CARTESIAN_POINT('',(2.2593,120.6862,-40.3351)); +#490 = DIRECTION('',(0.,1.,0.)); +#491 = DIRECTION('',(0.,0.,1.)); +#492 = DEFINITIONAL_REPRESENTATION('',(#493),#497); +#493 = LINE('',#494,#495); +#494 = CARTESIAN_POINT('',(0.,5.)); +#495 = VECTOR('',#496,1.); +#496 = DIRECTION('',(1.,0.)); +#497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#498 = ORIENTED_EDGE('',*,*,#499,.T.); +#499 = EDGE_CURVE('',#472,#500,#502,.T.); +#500 = VERTEX_POINT('',#501); +#501 = CARTESIAN_POINT('',(7.2593,118.9862,-27.3351)); +#502 = SURFACE_CURVE('',#503,(#508,#515),.PCURVE_S1.); +#503 = CIRCLE('',#504,1.7); +#504 = AXIS2_PLACEMENT_3D('',#505,#506,#507); +#505 = CARTESIAN_POINT('',(7.2593,118.9862,-29.0351)); +#506 = DIRECTION('',(1.,0.,0.)); +#507 = DIRECTION('',(-0.,0.,1.)); +#508 = PCURVE('',#125,#509); +#509 = DEFINITIONAL_REPRESENTATION('',(#510),#514); +#510 = CIRCLE('',#511,1.7); +#511 = AXIS2_PLACEMENT_2D('',#512,#513); +#512 = CARTESIAN_POINT('',(11.3,-15.8362)); +#513 = DIRECTION('',(1.,0.)); +#514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#515 = PCURVE('',#516,#521); +#516 = CYLINDRICAL_SURFACE('',#517,1.7); +#517 = AXIS2_PLACEMENT_3D('',#518,#519,#520); +#518 = CARTESIAN_POINT('',(2.2593,118.9862,-29.0351)); +#519 = DIRECTION('',(1.,0.,0.)); +#520 = DIRECTION('',(-0.,1.,0.)); +#521 = DEFINITIONAL_REPRESENTATION('',(#522),#526); +#522 = LINE('',#523,#524); +#523 = CARTESIAN_POINT('',(-4.712388980385,5.)); +#524 = VECTOR('',#525,1.); +#525 = DIRECTION('',(1.,0.)); +#526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#527 = ORIENTED_EDGE('',*,*,#528,.T.); +#528 = EDGE_CURVE('',#500,#165,#529,.T.); +#529 = SURFACE_CURVE('',#530,(#534,#541),.PCURVE_S1.); +#530 = LINE('',#531,#532); +#531 = CARTESIAN_POINT('',(7.2593,118.9862,-27.3351)); +#532 = VECTOR('',#533,1.); +#533 = DIRECTION('',(0.,-1.,0.)); +#534 = PCURVE('',#125,#535); +#535 = DEFINITIONAL_REPRESENTATION('',(#536),#540); +#536 = LINE('',#537,#538); +#537 = CARTESIAN_POINT('',(13.,-15.8362)); +#538 = VECTOR('',#539,1.); +#539 = DIRECTION('',(0.,1.)); +#540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#541 = PCURVE('',#201,#542); +#542 = DEFINITIONAL_REPRESENTATION('',(#543),#547); +#543 = LINE('',#544,#545); +#544 = CARTESIAN_POINT('',(5.,15.8362)); +#545 = VECTOR('',#546,1.); +#546 = DIRECTION('',(0.,-1.)); +#547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#548 = ORIENTED_EDGE('',*,*,#164,.T.); +#549 = ORIENTED_EDGE('',*,*,#112,.T.); +#550 = ORIENTED_EDGE('',*,*,#551,.T.); +#551 = EDGE_CURVE('',#85,#383,#552,.T.); +#552 = SURFACE_CURVE('',#553,(#558,#569),.PCURVE_S1.); +#553 = CIRCLE('',#554,5.); +#554 = AXIS2_PLACEMENT_3D('',#555,#556,#557); +#555 = CARTESIAN_POINT('',(7.2593,102.43621550726,-35.33509053063)); +#556 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#557 = DIRECTION('',(-3.31739324799E-15,0.707106781187,-0.707106781187) + ); +#558 = PCURVE('',#125,#559); +#559 = DEFINITIONAL_REPRESENTATION('',(#560),#568); +#560 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#561,#562,#563,#564,#565,#566 +,#567),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#561 = CARTESIAN_POINT('',(1.46447556343,-2.821749413201)); +#562 = CARTESIAN_POINT('',(-4.659248793528,3.301974943757)); +#563 = CARTESIAN_POINT('',(3.70591424385,5.543413624177)); +#564 = CARTESIAN_POINT('',(12.071077281228,7.784852304597)); +#565 = CARTESIAN_POINT('',(9.829638600808,-0.580310732781)); +#566 = CARTESIAN_POINT('',(7.588199920388,-8.945473770159)); +#567 = CARTESIAN_POINT('',(1.46447556343,-2.821749413201)); +#568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#569 = PCURVE('',#100,#570); +#570 = DEFINITIONAL_REPRESENTATION('',(#571),#575); +#571 = LINE('',#572,#573); +#572 = CARTESIAN_POINT('',(1.7763568394E-15,-13.59980880006)); +#573 = VECTOR('',#574,1.); +#574 = DIRECTION('',(1.,0.)); +#575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#576 = FACE_BOUND('',#577,.T.); +#577 = EDGE_LOOP('',(#578)); +#578 = ORIENTED_EDGE('',*,*,#579,.F.); +#579 = EDGE_CURVE('',#580,#580,#582,.T.); +#580 = VERTEX_POINT('',#581); +#581 = CARTESIAN_POINT('',(7.2593,113.6862,-31.4851)); +#582 = SURFACE_CURVE('',#583,(#588,#595),.PCURVE_S1.); +#583 = CIRCLE('',#584,2.35); +#584 = AXIS2_PLACEMENT_3D('',#585,#586,#587); +#585 = CARTESIAN_POINT('',(7.2593,113.6862,-33.8351)); +#586 = DIRECTION('',(1.,0.,0.)); +#587 = DIRECTION('',(-0.,0.,1.)); +#588 = PCURVE('',#125,#589); +#589 = DEFINITIONAL_REPRESENTATION('',(#590),#594); +#590 = CIRCLE('',#591,2.35); +#591 = AXIS2_PLACEMENT_2D('',#592,#593); +#592 = CARTESIAN_POINT('',(6.5,-10.5362)); +#593 = DIRECTION('',(1.,0.)); +#594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#595 = PCURVE('',#596,#601); +#596 = CYLINDRICAL_SURFACE('',#597,2.35); +#597 = AXIS2_PLACEMENT_3D('',#598,#599,#600); +#598 = CARTESIAN_POINT('',(2.0093,113.6862,-33.8351)); +#599 = DIRECTION('',(1.,0.,0.)); +#600 = DIRECTION('',(-0.,0.,1.)); +#601 = DEFINITIONAL_REPRESENTATION('',(#602),#606); +#602 = LINE('',#603,#604); +#603 = CARTESIAN_POINT('',(0.,5.25)); +#604 = VECTOR('',#605,1.); +#605 = DIRECTION('',(1.,0.)); +#606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#607 = ADVANCED_FACE('',(#608),#100,.T.); +#608 = FACE_BOUND('',#609,.T.); +#609 = EDGE_LOOP('',(#610,#640,#673,#696,#724,#743,#744,#745)); +#610 = ORIENTED_EDGE('',*,*,#611,.T.); +#611 = EDGE_CURVE('',#612,#614,#616,.T.); +#612 = VERTEX_POINT('',#613); +#613 = CARTESIAN_POINT('',(7.259322901415,102.43621550726, + -40.33509053063)); +#614 = VERTEX_POINT('',#615); +#615 = CARTESIAN_POINT('',(-0.240592800216,102.43621550726, + -40.33509053063)); +#616 = SURFACE_CURVE('',#617,(#621,#628),.PCURVE_S1.); +#617 = LINE('',#618,#619); +#618 = CARTESIAN_POINT('',(-6.340508800061,102.43621550726, + -40.33509053063)); +#619 = VECTOR('',#620,1.); +#620 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#621 = PCURVE('',#100,#622); +#622 = DEFINITIONAL_REPRESENTATION('',(#623),#627); +#623 = LINE('',#624,#625); +#624 = CARTESIAN_POINT('',(7.068583470577,-3.552713678801E-15)); +#625 = VECTOR('',#626,1.); +#626 = DIRECTION('',(-1.332282604117E-16,1.)); +#627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#628 = PCURVE('',#629,#634); +#629 = PLANE('',#630); +#630 = AXIS2_PLACEMENT_3D('',#631,#632,#633); +#631 = CARTESIAN_POINT('',(-6.34050879995,105.93621550726, + -40.33509053063)); +#632 = DIRECTION('',(-1.152780867537E-15,1.206206175281E-14,1.)); +#633 = DIRECTION('',(-4.607507153587E-11,-1.,1.206206175276E-14)); +#634 = DEFINITIONAL_REPRESENTATION('',(#635),#639); +#635 = LINE('',#636,#637); +#636 = CARTESIAN_POINT('',(3.5,5.041275452645E-11)); +#637 = VECTOR('',#638,1.); +#638 = DIRECTION('',(4.608091581926E-11,-1.)); +#639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#640 = ORIENTED_EDGE('',*,*,#641,.T.); +#641 = EDGE_CURVE('',#614,#642,#644,.T.); +#642 = VERTEX_POINT('',#643); +#643 = CARTESIAN_POINT('',(-0.240592800216,107.43621550726, + -35.33509053063)); +#644 = SURFACE_CURVE('',#645,(#650,#657),.PCURVE_S1.); +#645 = CIRCLE('',#646,5.); +#646 = AXIS2_PLACEMENT_3D('',#647,#648,#649); +#647 = CARTESIAN_POINT('',(-0.240592800216,102.43621550726, + -35.33509053063)); +#648 = DIRECTION('',(1.,6.28663787695E-15,-1.069399905187E-15)); +#649 = DIRECTION('',(-5.201504198413E-15,0.707106781187,-0.707106781187) + ); +#650 = PCURVE('',#100,#651); +#651 = DEFINITIONAL_REPRESENTATION('',(#652),#656); +#652 = LINE('',#653,#654); +#653 = CARTESIAN_POINT('',(12.566370614359,-6.099915999845)); +#654 = VECTOR('',#655,1.); +#655 = DIRECTION('',(-1.,-5.654319433713E-15)); +#656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#657 = PCURVE('',#658,#663); +#658 = PLANE('',#659); +#659 = AXIS2_PLACEMENT_3D('',#660,#661,#662); +#660 = CARTESIAN_POINT('',(-0.240592800216,100.97140847692, + -25.58526644707)); +#661 = DIRECTION('',(-1.,-6.28663787695E-15,1.069399905187E-15)); +#662 = DIRECTION('',(1.069399905187E-15,-2.346507503525E-14,1.)); +#663 = DEFINITIONAL_REPRESENTATION('',(#664),#672); +#664 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#665,#666,#667,#668,#669,#670 +,#671),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#665 = CARTESIAN_POINT('',(-13.28535798949,5.000340936271)); +#666 = CARTESIAN_POINT('',(-7.161633632536,11.124065293229)); +#667 = CARTESIAN_POINT('',(-4.920194952116,2.758902255851)); +#668 = CARTESIAN_POINT('',(-2.678756271696,-5.606260781527)); +#669 = CARTESIAN_POINT('',(-11.04391930907,-3.364822101107)); +#670 = CARTESIAN_POINT('',(-19.40908234645,-1.123383420687)); +#671 = CARTESIAN_POINT('',(-13.28535798949,5.000340936271)); +#672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#673 = ORIENTED_EDGE('',*,*,#674,.T.); +#674 = EDGE_CURVE('',#642,#675,#677,.T.); +#675 = VERTEX_POINT('',#676); +#676 = CARTESIAN_POINT('',(2.2593,107.43621550726,-35.33509053063)); +#677 = SURFACE_CURVE('',#678,(#682,#689),.PCURVE_S1.); +#678 = LINE('',#679,#680); +#679 = CARTESIAN_POINT('',(5.859322901415,107.43621550726, + -35.33509053063)); +#680 = VECTOR('',#681,1.); +#681 = DIRECTION('',(1.,0.,0.)); +#682 = PCURVE('',#100,#683); +#683 = DEFINITIONAL_REPRESENTATION('',(#684),#688); +#684 = LINE('',#685,#686); +#685 = CARTESIAN_POINT('',(5.497787143782,-12.19983170147)); +#686 = VECTOR('',#687,1.); +#687 = DIRECTION('',(2.368502407319E-16,-1.)); +#688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#689 = PCURVE('',#256,#690); +#690 = DEFINITIONAL_REPRESENTATION('',(#691),#695); +#691 = LINE('',#692,#693); +#692 = CARTESIAN_POINT('',(0.5,-12.19983170158)); +#693 = VECTOR('',#694,1.); +#694 = DIRECTION('',(1.152780867537E-15,-1.)); +#695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#696 = ORIENTED_EDGE('',*,*,#697,.T.); +#697 = EDGE_CURVE('',#675,#698,#700,.T.); +#698 = VERTEX_POINT('',#699); +#699 = CARTESIAN_POINT('',(2.2593,103.15,-40.28387944287)); +#700 = SURFACE_CURVE('',#701,(#706,#713),.PCURVE_S1.); +#701 = CIRCLE('',#702,5.); +#702 = AXIS2_PLACEMENT_3D('',#703,#704,#705); +#703 = CARTESIAN_POINT('',(2.2593,102.43621550726,-35.33509053063)); +#704 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#705 = DIRECTION('',(-3.31739324799E-15,0.707106781187,-0.707106781187) + ); +#706 = PCURVE('',#100,#707); +#707 = DEFINITIONAL_REPRESENTATION('',(#708),#712); +#708 = LINE('',#709,#710); +#709 = CARTESIAN_POINT('',(1.7763568394E-15,-8.599808800061)); +#710 = VECTOR('',#711,1.); +#711 = DIRECTION('',(1.,0.)); +#712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#713 = PCURVE('',#228,#714); +#714 = DEFINITIONAL_REPRESENTATION('',(#715),#723); +#715 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#716,#717,#718,#719,#720,#721 +,#722),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#716 = CARTESIAN_POINT('',(1.46447556343,-2.821749413201)); +#717 = CARTESIAN_POINT('',(-4.659248793528,3.301974943757)); +#718 = CARTESIAN_POINT('',(3.70591424385,5.543413624177)); +#719 = CARTESIAN_POINT('',(12.071077281228,7.784852304597)); +#720 = CARTESIAN_POINT('',(9.829638600808,-0.580310732781)); +#721 = CARTESIAN_POINT('',(7.588199920388,-8.945473770159)); +#722 = CARTESIAN_POINT('',(1.46447556343,-2.821749413201)); +#723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#724 = ORIENTED_EDGE('',*,*,#725,.F.); +#725 = EDGE_CURVE('',#383,#698,#726,.T.); +#726 = SURFACE_CURVE('',#727,(#731,#737),.PCURVE_S1.); +#727 = LINE('',#728,#729); +#728 = CARTESIAN_POINT('',(-6.340508800061,103.15,-40.28387944288)); +#729 = VECTOR('',#730,1.); +#730 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#731 = PCURVE('',#100,#732); +#732 = DEFINITIONAL_REPRESENTATION('',(#733),#736); +#733 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#734,#735),.UNSPECIFIED.,.F.,.F., + (2,2),(-13.59983230147,-8.099808800061),.PIECEWISE_BEZIER_KNOTS.); +#734 = CARTESIAN_POINT('',(6.925337184071,-13.59983230147)); +#735 = CARTESIAN_POINT('',(6.925337184071,-8.099808800061)); +#736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#737 = PCURVE('',#398,#738); +#738 = DEFINITIONAL_REPRESENTATION('',(#739),#742); +#739 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#740,#741),.UNSPECIFIED.,.F.,.F., + (2,2),(-13.59983230147,-8.099808800061),.PIECEWISE_BEZIER_KNOTS.); +#740 = CARTESIAN_POINT('',(5.122055712042E-02,5.000023501416)); +#741 = CARTESIAN_POINT('',(5.122055712041E-02,-0.5)); +#742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#743 = ORIENTED_EDGE('',*,*,#551,.F.); +#744 = ORIENTED_EDGE('',*,*,#84,.T.); +#745 = ORIENTED_EDGE('',*,*,#746,.F.); +#746 = EDGE_CURVE('',#612,#57,#747,.T.); +#747 = SURFACE_CURVE('',#748,(#753,#760),.PCURVE_S1.); +#748 = CIRCLE('',#749,5.); +#749 = AXIS2_PLACEMENT_3D('',#750,#751,#752); +#750 = CARTESIAN_POINT('',(7.259322901415,102.43621550726, + -35.33509053063)); +#751 = DIRECTION('',(1.,-5.828670879206E-16,-1.272038209669E-29)); +#752 = DIRECTION('',(-1.483290619891E-29,-3.624366765604E-15,-1.)); +#753 = PCURVE('',#100,#754); +#754 = DEFINITIONAL_REPRESENTATION('',(#755),#759); +#755 = LINE('',#756,#757); +#756 = CARTESIAN_POINT('',(7.068583470577,-13.59983170147)); +#757 = VECTOR('',#758,1.); +#758 = DIRECTION('',(-1.,-2.374814162159E-14)); +#759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#760 = PCURVE('',#72,#761); +#761 = DEFINITIONAL_REPRESENTATION('',(#762),#766); +#762 = CIRCLE('',#763,5.); +#763 = AXIS2_PLACEMENT_2D('',#764,#765); +#764 = CARTESIAN_POINT('',(1.500000030342,-10.74991204178)); +#765 = DIRECTION('',(-2.708944180085E-14,-1.)); +#766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#767 = ADVANCED_FACE('',(#768,#958,#993,#1107),#72,.T.); +#768 = FACE_BOUND('',#769,.T.); +#769 = EDGE_LOOP('',(#770,#771,#794,#822,#850,#878,#906,#935,#956,#957) + ); +#770 = ORIENTED_EDGE('',*,*,#140,.F.); +#771 = ORIENTED_EDGE('',*,*,#772,.T.); +#772 = EDGE_CURVE('',#141,#773,#775,.T.); +#773 = VERTEX_POINT('',#774); +#774 = CARTESIAN_POINT('',(7.259322901416,112.43621547692, + -7.735266447075)); +#775 = SURFACE_CURVE('',#776,(#780,#787),.PCURVE_S1.); +#776 = LINE('',#777,#778); +#777 = CARTESIAN_POINT('',(7.259322901415,112.43621547692, + -22.83509053063)); +#778 = VECTOR('',#779,1.); +#779 = DIRECTION('',(1.268842257444E-15,-4.345699664471E-13,1.)); +#780 = PCURVE('',#72,#781); +#781 = DEFINITIONAL_REPRESENTATION('',(#782),#786); +#782 = LINE('',#783,#784); +#783 = CARTESIAN_POINT('',(11.500000000003,1.750087958219)); +#784 = VECTOR('',#785,1.); +#785 = DIRECTION('',(-4.111048914118E-13,1.)); +#786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#787 = PCURVE('',#365,#788); +#788 = DEFINITIONAL_REPRESENTATION('',(#789),#793); +#789 = LINE('',#790,#791); +#790 = CARTESIAN_POINT('',(1.796285944102E-02,-14.69983170163)); +#791 = VECTOR('',#792,1.); +#792 = DIRECTION('',(-1.,-2.532645427443E-15)); +#793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#794 = ORIENTED_EDGE('',*,*,#795,.T.); +#795 = EDGE_CURVE('',#773,#796,#798,.T.); +#796 = VERTEX_POINT('',#797); +#797 = CARTESIAN_POINT('',(7.259322901416,89.436215476923, + -7.735266447075)); +#798 = SURFACE_CURVE('',#799,(#803,#810),.PCURVE_S1.); +#799 = LINE('',#800,#801); +#800 = CARTESIAN_POINT('',(7.259322901416,112.43621547692, + -7.735266447075)); +#801 = VECTOR('',#802,1.); +#802 = DIRECTION('',(-5.828670879206E-16,-1.,1.249454904232E-15)); +#803 = PCURVE('',#72,#804); +#804 = DEFINITIONAL_REPRESENTATION('',(#805),#809); +#805 = LINE('',#806,#807); +#806 = CARTESIAN_POINT('',(11.499999999997,16.849912041781)); +#807 = VECTOR('',#808,1.); +#808 = DIRECTION('',(-1.,2.471452993948E-14)); +#809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#810 = PCURVE('',#811,#816); +#811 = PLANE('',#812); +#812 = AXIS2_PLACEMENT_3D('',#813,#814,#815); +#813 = CARTESIAN_POINT('',(2.809365050599,100.93621547692, + -7.735266447075)); +#814 = DIRECTION('',(-6.906312355993E-17,-3.602940798566E-17,1.)); +#815 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798566E-17)); +#816 = DEFINITIONAL_REPRESENTATION('',(#817),#821); +#817 = LINE('',#818,#819); +#818 = CARTESIAN_POINT('',(11.5,-4.449957850816)); +#819 = VECTOR('',#820,1.); +#820 = DIRECTION('',(-1.,6.427150478489E-15)); +#821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#822 = ORIENTED_EDGE('',*,*,#823,.T.); +#823 = EDGE_CURVE('',#796,#824,#826,.T.); +#824 = VERTEX_POINT('',#825); +#825 = CARTESIAN_POINT('',(7.259322901415,89.436215476929, + -22.83509053063)); +#826 = SURFACE_CURVE('',#827,(#831,#838),.PCURVE_S1.); +#827 = LINE('',#828,#829); +#828 = CARTESIAN_POINT('',(7.259322901415,89.436215476923, + -8.835266447075)); +#829 = VECTOR('',#830,1.); +#830 = DIRECTION('',(2.626906814386E-28,4.739833790689E-13,-1.)); +#831 = PCURVE('',#72,#832); +#832 = DEFINITIONAL_REPRESENTATION('',(#833),#837); +#833 = LINE('',#834,#835); +#834 = CARTESIAN_POINT('',(-11.5,15.749912041781)); +#835 = VECTOR('',#836,1.); +#836 = DIRECTION('',(4.505183040336E-13,-1.)); +#837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#838 = PCURVE('',#839,#844); +#839 = PLANE('',#840); +#840 = AXIS2_PLACEMENT_3D('',#841,#842,#843); +#841 = CARTESIAN_POINT('',(-7.440508800216,89.43621547693, + -40.01226644707)); +#842 = DIRECTION('',(5.844283390569E-15,-1.,-2.346507503525E-14)); +#843 = DIRECTION('',(-1.263803170001E-15,-2.346507503525E-14,1.)); +#844 = DEFINITIONAL_REPRESENTATION('',(#845),#849); +#845 = LINE('',#846,#847); +#846 = CARTESIAN_POINT('',(31.177000000001,-14.69983170163)); +#847 = VECTOR('',#848,1.); +#848 = DIRECTION('',(-1.,1.263803169999E-15)); +#849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#850 = ORIENTED_EDGE('',*,*,#851,.F.); +#851 = EDGE_CURVE('',#852,#824,#854,.T.); +#852 = VERTEX_POINT('',#853); +#853 = CARTESIAN_POINT('',(7.259322901415,94.436215507268, + -27.83509053063)); +#854 = SURFACE_CURVE('',#855,(#859,#866),.PCURVE_S1.); +#855 = LINE('',#856,#857); +#856 = CARTESIAN_POINT('',(7.259322901415,93.998737466483, + -27.39761252019)); +#857 = VECTOR('',#858,1.); +#858 = DIRECTION('',(-4.121492703991E-16,-0.707106781187,0.707106781187) + ); +#859 = PCURVE('',#72,#860); +#860 = DEFINITIONAL_REPRESENTATION('',(#861),#865); +#861 = LINE('',#862,#863); +#862 = CARTESIAN_POINT('',(-6.937478010443,-2.812434031335)); +#863 = VECTOR('',#864,1.); +#864 = DIRECTION('',(-0.707106781187,0.707106781187)); +#865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#866 = PCURVE('',#867,#872); +#867 = PLANE('',#868); +#868 = AXIS2_PLACEMENT_3D('',#869,#870,#871); +#869 = CARTESIAN_POINT('',(-6.890508800255,91.936215476929, + -25.33509053063)); +#870 = DIRECTION('',(4.947671585305E-15,-0.707106781187,-0.707106781187) + ); +#871 = DIRECTION('',(-1.,6.161479795413E-30,-6.997064258106E-15)); +#872 = DEFINITIONAL_REPRESENTATION('',(#873),#877); +#873 = LINE('',#874,#875); +#874 = CARTESIAN_POINT('',(-14.14983170167,2.91684657032)); +#875 = VECTOR('',#876,1.); +#876 = DIRECTION('',(-4.535522314906E-15,-1.)); +#877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#878 = ORIENTED_EDGE('',*,*,#879,.T.); +#879 = EDGE_CURVE('',#852,#880,#882,.T.); +#880 = VERTEX_POINT('',#881); +#881 = CARTESIAN_POINT('',(7.259322901415,94.436215507268, + -35.33509053063)); +#882 = SURFACE_CURVE('',#883,(#887,#894),.PCURVE_S1.); +#883 = LINE('',#884,#885); +#884 = CARTESIAN_POINT('',(7.259322901415,94.436215507268, + -27.83509053063)); +#885 = VECTOR('',#886,1.); +#886 = DIRECTION('',(-1.035379938103E-29,1.103057715945E-14,-1.)); +#887 = PCURVE('',#72,#888); +#888 = DEFINITIONAL_REPRESENTATION('',(#889),#893); +#889 = LINE('',#890,#891); +#890 = CARTESIAN_POINT('',(-6.499999969658,-3.249912041781)); +#891 = VECTOR('',#892,1.); +#892 = DIRECTION('',(-1.24344978758E-14,-1.)); +#893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#894 = PCURVE('',#895,#900); +#895 = PLANE('',#896); +#896 = AXIS2_PLACEMENT_3D('',#897,#898,#899); +#897 = CARTESIAN_POINT('',(-6.34050880041,94.436215507268, + -40.33509053063)); +#898 = DIRECTION('',(5.844283390569E-15,-1.,-2.346507503525E-14)); +#899 = DIRECTION('',(-1.152780867537E-15,-2.346507503525E-14,1.)); +#900 = DEFINITIONAL_REPRESENTATION('',(#901),#905); +#901 = LINE('',#902,#903); +#902 = CARTESIAN_POINT('',(12.5,-13.59983170182)); +#903 = VECTOR('',#904,1.); +#904 = DIRECTION('',(-1.,1.152780867537E-15)); +#905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#906 = ORIENTED_EDGE('',*,*,#907,.T.); +#907 = EDGE_CURVE('',#880,#908,#910,.T.); +#908 = VERTEX_POINT('',#909); +#909 = CARTESIAN_POINT('',(7.259322901415,99.436215507268, + -40.33509053063)); +#910 = SURFACE_CURVE('',#911,(#916,#923),.PCURVE_S1.); +#911 = CIRCLE('',#912,5.); +#912 = AXIS2_PLACEMENT_3D('',#913,#914,#915); +#913 = CARTESIAN_POINT('',(7.259322901415,99.436215507268, + -35.33509053063)); +#914 = DIRECTION('',(1.,-5.828670879206E-16,-1.272038209669E-29)); +#915 = DIRECTION('',(-5.828670879206E-16,-1.,-9.254220320047E-15)); +#916 = PCURVE('',#72,#917); +#917 = DEFINITIONAL_REPRESENTATION('',(#918),#922); +#918 = CIRCLE('',#919,5.); +#919 = AXIS2_PLACEMENT_2D('',#920,#921); +#920 = CARTESIAN_POINT('',(-1.499999969658,-10.74991204178)); +#921 = DIRECTION('',(-1.,1.42108547152E-14)); +#922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#923 = PCURVE('',#924,#929); +#924 = CYLINDRICAL_SURFACE('',#925,5.); +#925 = AXIS2_PLACEMENT_3D('',#926,#927,#928); +#926 = CARTESIAN_POINT('',(-6.34050880018,99.436215507268, + -35.33509053063)); +#927 = DIRECTION('',(1.,5.844283390569E-15,1.152780867537E-15)); +#928 = DIRECTION('',(4.947671585305E-15,-0.707106781187,-0.707106781187) + ); +#929 = DEFINITIONAL_REPRESENTATION('',(#930),#934); +#930 = LINE('',#931,#932); +#931 = CARTESIAN_POINT('',(5.497787143782,13.599831701595)); +#932 = VECTOR('',#933,1.); +#933 = DIRECTION('',(1.,1.696295830114E-14)); +#934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#935 = ORIENTED_EDGE('',*,*,#936,.T.); +#936 = EDGE_CURVE('',#908,#612,#937,.T.); +#937 = SURFACE_CURVE('',#938,(#942,#949),.PCURVE_S1.); +#938 = LINE('',#939,#940); +#939 = CARTESIAN_POINT('',(7.259322901415,99.436215507268, + -40.33509053063)); +#940 = VECTOR('',#941,1.); +#941 = DIRECTION('',(5.828670879206E-16,1.,-2.390444068209E-14)); +#942 = PCURVE('',#72,#943); +#943 = DEFINITIONAL_REPRESENTATION('',(#944),#948); +#944 = LINE('',#945,#946); +#945 = CARTESIAN_POINT('',(-1.499999969659,-15.74991204178)); +#946 = VECTOR('',#947,1.); +#947 = DIRECTION('',(1.,-4.736951571734E-14)); +#948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#949 = PCURVE('',#629,#950); +#950 = DEFINITIONAL_REPRESENTATION('',(#951),#955); +#951 = LINE('',#952,#953); +#952 = CARTESIAN_POINT('',(6.499999999374,13.599831701665)); +#953 = VECTOR('',#954,1.); +#954 = DIRECTION('',(-1.,-4.607448866878E-11)); +#955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#956 = ORIENTED_EDGE('',*,*,#746,.T.); +#957 = ORIENTED_EDGE('',*,*,#56,.T.); +#958 = FACE_BOUND('',#959,.T.); +#959 = EDGE_LOOP('',(#960)); +#960 = ORIENTED_EDGE('',*,*,#961,.T.); +#961 = EDGE_CURVE('',#962,#962,#964,.T.); +#962 = VERTEX_POINT('',#963); +#963 = CARTESIAN_POINT('',(7.259322901415,102.22140847692, + -17.51026644707)); +#964 = SURFACE_CURVE('',#965,(#970,#981),.PCURVE_S1.); +#965 = CIRCLE('',#966,1.25); +#966 = AXIS2_PLACEMENT_3D('',#967,#968,#969); +#967 = CARTESIAN_POINT('',(7.259322901415,100.97140847692, + -17.51026644707)); +#968 = DIRECTION('',(-1.,5.828670879206E-16,1.272038209669E-29)); +#969 = DIRECTION('',(5.828670879206E-16,1.,2.346507503525E-14)); +#970 = PCURVE('',#72,#971); +#971 = DEFINITIONAL_REPRESENTATION('',(#972),#980); +#972 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#973,#974,#975,#976,#977,#978 +,#979),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#973 = CARTESIAN_POINT('',(1.285193000002,7.074912041781)); +#974 = CARTESIAN_POINT('',(1.285193000002,4.90984853232)); +#975 = CARTESIAN_POINT('',(-0.589806999998,5.992380287051)); +#976 = CARTESIAN_POINT('',(-2.464806999998,7.074912041781)); +#977 = CARTESIAN_POINT('',(-0.589806999998,8.157443796512)); +#978 = CARTESIAN_POINT('',(1.285193000002,9.239975551242)); +#979 = CARTESIAN_POINT('',(1.285193000002,7.074912041781)); +#980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#981 = PCURVE('',#982,#987); +#982 = CYLINDRICAL_SURFACE('',#983,1.25); +#983 = AXIS2_PLACEMENT_3D('',#984,#985,#986); +#984 = CARTESIAN_POINT('',(-3.140508800215,100.97140847692, + -17.51026644707)); +#985 = DIRECTION('',(1.,-3.72965547332E-16,1.152780867537E-15)); +#986 = DIRECTION('',(-3.72965547332E-16,-1.,-2.346507503525E-14)); +#987 = DEFINITIONAL_REPRESENTATION('',(#988),#992); +#988 = LINE('',#989,#990); +#989 = CARTESIAN_POINT('',(3.14159265359,10.399831701631)); +#990 = VECTOR('',#991,1.); +#991 = DIRECTION('',(-1.,0.)); +#992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#993 = FACE_BOUND('',#994,.T.); +#994 = EDGE_LOOP('',(#995,#1025,#1053,#1081)); +#995 = ORIENTED_EDGE('',*,*,#996,.T.); +#996 = EDGE_CURVE('',#997,#999,#1001,.T.); +#997 = VERTEX_POINT('',#998); +#998 = CARTESIAN_POINT('',(7.259322901415,102.93621550726, + -37.33509053063)); +#999 = VERTEX_POINT('',#1000); +#1000 = CARTESIAN_POINT('',(7.259322901415,98.936215507269, + -37.33509053063)); +#1001 = SURFACE_CURVE('',#1002,(#1006,#1013),.PCURVE_S1.); +#1002 = LINE('',#1003,#1004); +#1003 = CARTESIAN_POINT('',(7.259322901415,102.93621550726, + -37.33509053063)); +#1004 = VECTOR('',#1005,1.); +#1005 = DIRECTION('',(-5.828670879206E-16,-1.,-5.701506641247E-15)); +#1006 = PCURVE('',#72,#1007); +#1007 = DEFINITIONAL_REPRESENTATION('',(#1008),#1012); +#1008 = LINE('',#1009,#1010); +#1009 = CARTESIAN_POINT('',(2.000000030343,-12.74991204178)); +#1010 = VECTOR('',#1011,1.); +#1011 = DIRECTION('',(-1.,1.7763568394E-14)); +#1012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1013 = PCURVE('',#1014,#1019); +#1014 = PLANE('',#1015); +#1015 = AXIS2_PLACEMENT_3D('',#1016,#1017,#1018); +#1016 = CARTESIAN_POINT('',(-7.440508800294,93.436215507268, + -37.33509053063)); +#1017 = DIRECTION('',(-3.002712059975E-15,-2.344686043875E-14,1.)); +#1018 = DIRECTION('',(-6.316128176035E-15,1.,2.344686043875E-14)); +#1019 = DEFINITIONAL_REPRESENTATION('',(#1020),#1024); +#1020 = LINE('',#1021,#1022); +#1021 = CARTESIAN_POINT('',(9.500000000001,-14.69983170171)); +#1022 = VECTOR('',#1023,1.); +#1023 = DIRECTION('',(-1.,6.898995263956E-15)); +#1024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1025 = ORIENTED_EDGE('',*,*,#1026,.T.); +#1026 = EDGE_CURVE('',#999,#1027,#1029,.T.); +#1027 = VERTEX_POINT('',#1028); +#1028 = CARTESIAN_POINT('',(7.259322901415,98.936215507268, + -34.83509053063)); +#1029 = SURFACE_CURVE('',#1030,(#1034,#1041),.PCURVE_S1.); +#1030 = LINE('',#1031,#1032); +#1031 = CARTESIAN_POINT('',(7.259322901415,98.936215507269, + -37.33509053063)); +#1032 = VECTOR('',#1033,1.); +#1033 = DIRECTION('',(-4.161241275041E-29,-9.274299177187E-14,1.)); +#1034 = PCURVE('',#72,#1035); +#1035 = DEFINITIONAL_REPRESENTATION('',(#1036),#1040); +#1036 = LINE('',#1037,#1038); +#1037 = CARTESIAN_POINT('',(-1.999999969657,-12.74991204178)); +#1038 = VECTOR('',#1039,1.); +#1039 = DIRECTION('',(-6.927791673662E-14,1.)); +#1040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1041 = PCURVE('',#1042,#1047); +#1042 = PLANE('',#1043); +#1043 = AXIS2_PLACEMENT_3D('',#1044,#1045,#1046); +#1044 = CARTESIAN_POINT('',(-7.440508800294,98.936215507268, + -42.40809053063)); +#1045 = DIRECTION('',(-6.316128176035E-15,1.,2.344686043875E-14)); +#1046 = DIRECTION('',(3.002712059975E-15,2.344686043875E-14,-1.)); +#1047 = DEFINITIONAL_REPRESENTATION('',(#1048),#1052); +#1048 = LINE('',#1049,#1050); +#1049 = CARTESIAN_POINT('',(-5.073000000001,-14.69983170171)); +#1050 = VECTOR('',#1051,1.); +#1051 = DIRECTION('',(-1.,-3.002712059974E-15)); +#1052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1053 = ORIENTED_EDGE('',*,*,#1054,.T.); +#1054 = EDGE_CURVE('',#1027,#1055,#1057,.T.); +#1055 = VERTEX_POINT('',#1056); +#1056 = CARTESIAN_POINT('',(7.259322901415,102.93621550726, + -34.83509053063)); +#1057 = SURFACE_CURVE('',#1058,(#1062,#1069),.PCURVE_S1.); +#1058 = LINE('',#1059,#1060); +#1059 = CARTESIAN_POINT('',(7.259322901415,98.936215507268, + -34.83509053063)); +#1060 = VECTOR('',#1061,1.); +#1061 = DIRECTION('',(5.828670879206E-16,1.,5.899221182325E-14)); +#1062 = PCURVE('',#72,#1063); +#1063 = DEFINITIONAL_REPRESENTATION('',(#1064),#1068); +#1064 = LINE('',#1065,#1066); +#1065 = CARTESIAN_POINT('',(-1.999999969658,-10.24991204178)); +#1066 = VECTOR('',#1067,1.); +#1067 = DIRECTION('',(1.,3.5527136788E-14)); +#1068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1069 = PCURVE('',#1070,#1075); +#1070 = PLANE('',#1071); +#1071 = AXIS2_PLACEMENT_3D('',#1072,#1073,#1074); +#1072 = CARTESIAN_POINT('',(-7.440508800295,108.43621550726, + -34.83509053063)); +#1073 = DIRECTION('',(4.078389144539E-16,-2.344686043875E-14,1.)); +#1074 = DIRECTION('',(6.286637876941E-15,-1.,-2.344686043875E-14)); +#1075 = DEFINITIONAL_REPRESENTATION('',(#1076),#1080); +#1076 = LINE('',#1077,#1078); +#1077 = CARTESIAN_POINT('',(9.5,14.69983170171)); +#1078 = VECTOR('',#1079,1.); +#1079 = DIRECTION('',(-1.,6.869504964862E-15)); +#1080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1081 = ORIENTED_EDGE('',*,*,#1082,.T.); +#1082 = EDGE_CURVE('',#1055,#997,#1083,.T.); +#1083 = SURFACE_CURVE('',#1084,(#1088,#1095),.PCURVE_S1.); +#1084 = LINE('',#1085,#1086); +#1085 = CARTESIAN_POINT('',(7.259322901415,102.93621550726, + -34.83509053063)); +#1086 = VECTOR('',#1087,1.); +#1087 = DIRECTION('',(4.042912139258E-29,7.675578021726E-14,-1.)); +#1088 = PCURVE('',#72,#1089); +#1089 = DEFINITIONAL_REPRESENTATION('',(#1090),#1094); +#1090 = LINE('',#1091,#1092); +#1091 = CARTESIAN_POINT('',(2.000000030343,-10.24991204178)); +#1092 = VECTOR('',#1093,1.); +#1093 = DIRECTION('',(5.329070518201E-14,-1.)); +#1094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1095 = PCURVE('',#1096,#1101); +#1096 = PLANE('',#1097); +#1097 = AXIS2_PLACEMENT_3D('',#1098,#1099,#1100); +#1098 = CARTESIAN_POINT('',(-7.440508800138,102.93621550726, + -47.40809053063)); +#1099 = DIRECTION('',(6.316128176035E-15,-1.,-2.344686043875E-14)); +#1100 = DIRECTION('',(-3.002712059975E-15,-2.344686043875E-14,1.)); +#1101 = DEFINITIONAL_REPRESENTATION('',(#1102),#1106); +#1102 = LINE('',#1103,#1104); +#1103 = CARTESIAN_POINT('',(12.573,-14.69983170155)); +#1104 = VECTOR('',#1105,1.); +#1105 = DIRECTION('',(-1.,3.002712059974E-15)); +#1106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1107 = FACE_BOUND('',#1108,.T.); +#1108 = EDGE_LOOP('',(#1109,#1139,#1167,#1195)); +#1109 = ORIENTED_EDGE('',*,*,#1110,.T.); +#1110 = EDGE_CURVE('',#1111,#1113,#1115,.T.); +#1111 = VERTEX_POINT('',#1112); +#1112 = CARTESIAN_POINT('',(7.259322901415,97.921408476915, + -30.38526644707)); +#1113 = VERTEX_POINT('',#1114); +#1114 = CARTESIAN_POINT('',(7.259322901415,97.921408476915, + -24.28526644707)); +#1115 = SURFACE_CURVE('',#1116,(#1120,#1127),.PCURVE_S1.); +#1116 = LINE('',#1117,#1118); +#1117 = CARTESIAN_POINT('',(7.259322901415,97.921408476915, + -24.28526644707)); +#1118 = VECTOR('',#1119,1.); +#1119 = DIRECTION('',(1.350924300191E-29,5.594232025409E-16,1.)); +#1120 = PCURVE('',#72,#1121); +#1121 = DEFINITIONAL_REPRESENTATION('',(#1122),#1126); +#1122 = LINE('',#1123,#1124); +#1123 = CARTESIAN_POINT('',(-3.014807000011,0.29991204178)); +#1124 = VECTOR('',#1125,1.); +#1125 = DIRECTION('',(2.402449823779E-14,1.)); +#1126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1127 = PCURVE('',#1128,#1133); +#1128 = PLANE('',#1129); +#1129 = AXIS2_PLACEMENT_3D('',#1130,#1131,#1132); +#1130 = CARTESIAN_POINT('',(5.859322901415,97.921408476915, + -30.38526644707)); +#1131 = DIRECTION('',(0.,1.,-5.594232025409E-16)); +#1132 = DIRECTION('',(1.350924300191E-29,5.594232025409E-16,1.)); +#1133 = DEFINITIONAL_REPRESENTATION('',(#1134),#1138); +#1134 = LINE('',#1135,#1136); +#1135 = CARTESIAN_POINT('',(6.1,1.4)); +#1136 = VECTOR('',#1137,1.); +#1137 = DIRECTION('',(1.,0.)); +#1138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1139 = ORIENTED_EDGE('',*,*,#1140,.T.); +#1140 = EDGE_CURVE('',#1113,#1141,#1143,.T.); +#1141 = VERTEX_POINT('',#1142); +#1142 = CARTESIAN_POINT('',(7.259322901415,104.02140847691, + -24.28526644707)); +#1143 = SURFACE_CURVE('',#1144,(#1148,#1155),.PCURVE_S1.); +#1144 = LINE('',#1145,#1146); +#1145 = CARTESIAN_POINT('',(7.259322901415,104.02140847691, + -24.28526644707)); +#1146 = VECTOR('',#1147,1.); +#1147 = DIRECTION('',(5.828670879206E-16,1.,1.68591895574E-16)); +#1148 = PCURVE('',#72,#1149); +#1149 = DEFINITIONAL_REPRESENTATION('',(#1150),#1154); +#1150 = LINE('',#1151,#1152); +#1151 = CARTESIAN_POINT('',(3.085192999989,0.29991204178)); +#1152 = VECTOR('',#1153,1.); +#1153 = DIRECTION('',(1.,-2.329648313968E-14)); +#1154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1155 = PCURVE('',#1156,#1161); +#1156 = PLANE('',#1157); +#1157 = AXIS2_PLACEMENT_3D('',#1158,#1159,#1160); +#1158 = CARTESIAN_POINT('',(5.859322901415,97.921408476915, + -24.28526644707)); +#1159 = DIRECTION('',(0.,1.68591895574E-16,-1.)); +#1160 = DIRECTION('',(5.828670879206E-16,1.,1.68591895574E-16)); +#1161 = DEFINITIONAL_REPRESENTATION('',(#1162),#1166); +#1162 = LINE('',#1163,#1164); +#1163 = CARTESIAN_POINT('',(6.1,1.4)); +#1164 = VECTOR('',#1165,1.); +#1165 = DIRECTION('',(1.,-1.656696369839E-47)); +#1166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1167 = ORIENTED_EDGE('',*,*,#1168,.T.); +#1168 = EDGE_CURVE('',#1141,#1169,#1171,.T.); +#1169 = VERTEX_POINT('',#1170); +#1170 = CARTESIAN_POINT('',(7.259322901415,104.02140847691, + -30.38526644707)); +#1171 = SURFACE_CURVE('',#1172,(#1176,#1183),.PCURVE_S1.); +#1172 = LINE('',#1173,#1174); +#1173 = CARTESIAN_POINT('',(7.259322901415,104.02140847691, + -30.38526644707)); +#1174 = VECTOR('',#1175,1.); +#1175 = DIRECTION('',(-1.360785061506E-29,-1.287438300656E-15,-1.)); +#1176 = PCURVE('',#72,#1177); +#1177 = DEFINITIONAL_REPRESENTATION('',(#1178),#1182); +#1178 = LINE('',#1179,#1180); +#1179 = CARTESIAN_POINT('',(3.085192999989,-5.80008795822)); +#1180 = VECTOR('',#1181,1.); +#1181 = DIRECTION('',(-2.475251333591E-14,-1.)); +#1182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1183 = PCURVE('',#1184,#1189); +#1184 = PLANE('',#1185); +#1185 = AXIS2_PLACEMENT_3D('',#1186,#1187,#1188); +#1186 = CARTESIAN_POINT('',(5.859322901415,104.02140847691, + -24.28526644707)); +#1187 = DIRECTION('',(0.,-1.,1.287438300656E-15)); +#1188 = DIRECTION('',(-1.360785061506E-29,-1.287438300656E-15,-1.)); +#1189 = DEFINITIONAL_REPRESENTATION('',(#1190),#1194); +#1190 = LINE('',#1191,#1192); +#1191 = CARTESIAN_POINT('',(6.1,1.4)); +#1192 = VECTOR('',#1193,1.); +#1193 = DIRECTION('',(1.,0.)); +#1194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1195 = ORIENTED_EDGE('',*,*,#1196,.T.); +#1196 = EDGE_CURVE('',#1169,#1111,#1197,.T.); +#1197 = SURFACE_CURVE('',#1198,(#1202,#1209),.PCURVE_S1.); +#1198 = LINE('',#1199,#1200); +#1199 = CARTESIAN_POINT('',(7.259322901415,97.921408476915, + -30.38526644707)); +#1200 = VECTOR('',#1201,1.); +#1201 = DIRECTION('',(-5.828670879206E-16,-1.,-1.685918955739E-16)); +#1202 = PCURVE('',#72,#1203); +#1203 = DEFINITIONAL_REPRESENTATION('',(#1204),#1208); +#1204 = LINE('',#1205,#1206); +#1205 = CARTESIAN_POINT('',(-3.014807000011,-5.80008795822)); +#1206 = VECTOR('',#1207,1.); +#1207 = DIRECTION('',(-1.,2.329648313968E-14)); +#1208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1209 = PCURVE('',#1210,#1215); +#1210 = PLANE('',#1211); +#1211 = AXIS2_PLACEMENT_3D('',#1212,#1213,#1214); +#1212 = CARTESIAN_POINT('',(5.859322901415,104.02140847691, + -30.38526644707)); +#1213 = DIRECTION('',(0.,-1.685918955739E-16,1.)); +#1214 = DIRECTION('',(-5.828670879206E-16,-1.,-1.685918955739E-16)); +#1215 = DEFINITIONAL_REPRESENTATION('',(#1216),#1220); +#1216 = LINE('',#1217,#1218); +#1217 = CARTESIAN_POINT('',(6.1,1.4)); +#1218 = VECTOR('',#1219,1.); +#1219 = DIRECTION('',(1.,1.656696369839E-47)); +#1220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1221 = ADVANCED_FACE('',(#1222),#365,.T.); +#1222 = FACE_BOUND('',#1223,.T.); +#1223 = EDGE_LOOP('',(#1224,#1225,#1248,#1269)); +#1224 = ORIENTED_EDGE('',*,*,#351,.F.); +#1225 = ORIENTED_EDGE('',*,*,#1226,.T.); +#1226 = EDGE_CURVE('',#324,#1227,#1229,.T.); +#1227 = VERTEX_POINT('',#1228); +#1228 = CARTESIAN_POINT('',(-0.240592800217,112.43621547692, + -7.735266447075)); +#1229 = SURFACE_CURVE('',#1230,(#1234,#1241),.PCURVE_S1.); +#1230 = LINE('',#1231,#1232); +#1231 = CARTESIAN_POINT('',(-0.240592800216,112.43621547692, + -24.20119705913)); +#1232 = VECTOR('',#1233,1.); +#1233 = DIRECTION('',(1.069399905187E-15,-2.346507503525E-14,1.)); +#1234 = PCURVE('',#365,#1235); +#1235 = DEFINITIONAL_REPRESENTATION('',(#1236),#1240); +#1236 = LINE('',#1237,#1238); +#1237 = CARTESIAN_POINT('',(1.38406938794,-7.199916)); +#1238 = VECTOR('',#1239,1.); +#1239 = DIRECTION('',(-1.,-2.333203075189E-15)); +#1240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1241 = PCURVE('',#339,#1242); +#1242 = DEFINITIONAL_REPRESENTATION('',(#1243),#1247); +#1243 = LINE('',#1244,#1245); +#1244 = CARTESIAN_POINT('',(1.38406938794,11.464807)); +#1245 = VECTOR('',#1246,1.); +#1246 = DIRECTION('',(1.,9.781875224741E-29)); +#1247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1248 = ORIENTED_EDGE('',*,*,#1249,.T.); +#1249 = EDGE_CURVE('',#1227,#773,#1250,.T.); +#1250 = SURFACE_CURVE('',#1251,(#1255,#1262),.PCURVE_S1.); +#1251 = LINE('',#1252,#1253); +#1252 = CARTESIAN_POINT('',(5.859322901416,112.43621547692, + -7.735266447075)); +#1253 = VECTOR('',#1254,1.); +#1254 = DIRECTION('',(1.,1.819642222015E-32,2.009622454612E-61)); +#1255 = PCURVE('',#365,#1256); +#1256 = DEFINITIONAL_REPRESENTATION('',(#1257),#1261); +#1257 = LINE('',#1258,#1259); +#1258 = CARTESIAN_POINT('',(-15.08186122412,-13.29983170163)); +#1259 = VECTOR('',#1260,1.); +#1260 = DIRECTION('',(1.263803170001E-15,-1.)); +#1261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1262 = PCURVE('',#811,#1263); +#1263 = DEFINITIONAL_REPRESENTATION('',(#1264),#1268); +#1264 = LINE('',#1265,#1266); +#1265 = CARTESIAN_POINT('',(11.5,-3.049957850816)); +#1266 = VECTOR('',#1267,1.); +#1267 = DIRECTION('',(-5.844283390569E-15,-1.)); +#1268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1269 = ORIENTED_EDGE('',*,*,#772,.F.); +#1270 = ADVANCED_FACE('',(#1271),#339,.T.); +#1271 = FACE_BOUND('',#1272,.T.); +#1272 = EDGE_LOOP('',(#1273,#1325,#1353,#1381,#1409,#1437,#1465,#1486, + #1487,#1488,#1511)); +#1273 = ORIENTED_EDGE('',*,*,#1274,.F.); +#1274 = EDGE_CURVE('',#1275,#1277,#1279,.T.); +#1275 = VERTEX_POINT('',#1276); +#1276 = CARTESIAN_POINT('',(-0.240592800216,107.02162092162, + -20.62826644707)); +#1277 = VERTEX_POINT('',#1278); +#1278 = CARTESIAN_POINT('',(-0.240592800216,107.52154541642, + -21.83519094137)); +#1279 = SURFACE_CURVE('',#1280,(#1284,#1291),.PCURVE_S1.); +#1280 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1281,#1282,#1283), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(2.006868184961, +2.006880042254),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((2.258821083463, +2.002178652246,1.745533188316)) REPRESENTATION_ITEM('') ); +#1281 = CARTESIAN_POINT('',(-0.240592800216,107.02162092162, + -20.62826644707)); +#1282 = CARTESIAN_POINT('',(-0.240592800216,107.23954094606, + -21.15437192493)); +#1283 = CARTESIAN_POINT('',(-0.240592800216,107.52154541642, + -21.83519094137)); +#1284 = PCURVE('',#339,#1285); +#1285 = DEFINITIONAL_REPRESENTATION('',(#1286),#1290); +#1286 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1287,#1288,#1289), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(2.006868184961, +2.006880042254),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((2.258821083463, +2.002178652246,1.745533188316)) REPRESENTATION_ITEM('') ); +#1287 = CARTESIAN_POINT('',(4.957,6.050212444699)); +#1288 = CARTESIAN_POINT('',(4.430894522142,6.26813246914)); +#1289 = CARTESIAN_POINT('',(3.750075505703,6.550136939496)); +#1290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1291 = PCURVE('',#1292,#1297); +#1292 = CONICAL_SURFACE('',#1293,1.949962247149,0.392699081699); +#1293 = AXIS2_PLACEMENT_3D('',#1294,#1295,#1296); +#1294 = CARTESIAN_POINT('',(-0.240504400126,105.3216209239, + -21.23172869422)); +#1295 = DIRECTION('',(6.324159738535E-16,0.,-1.)); +#1296 = DIRECTION('',(1.,-1.483227622038E-13,6.324159738535E-16)); +#1297 = DEFINITIONAL_REPRESENTATION('',(#1298),#1324); +#1298 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1299,#1300,#1301,#1302,#1303, + #1304,#1305,#1306,#1307,#1308,#1309,#1310,#1311,#1312,#1313,#1314, + #1315,#1316,#1317,#1318,#1319,#1320,#1321,#1322,#1323), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (2.006868184961,2.006868723929,2.006869262897,2.006869801865, + 2.006870340833,2.006870879801,2.006871418769,2.006871957736, + 2.006872496704,2.006873035672,2.00687357464,2.006874113608, + 2.006874652576,2.006875191544,2.006875730511,2.006876269479, + 2.006876808447,2.006877347415,2.006877886383,2.006878425351, + 2.006878964319,2.006879503287,2.006880042254), + .QUASI_UNIFORM_KNOTS.); +#1299 = CARTESIAN_POINT('',(4.712336980332,-0.603462247142)); +#1300 = CARTESIAN_POINT('',(4.712337159375,-0.589330920499)); +#1301 = CARTESIAN_POINT('',(4.712337517463,-0.560776715798)); +#1302 = CARTESIAN_POINT('',(4.712338054593,-0.517041738367)); +#1303 = CARTESIAN_POINT('',(4.712338591724,-0.47237455741)); +#1304 = CARTESIAN_POINT('',(4.712339128854,-0.426744949312)); +#1305 = CARTESIAN_POINT('',(4.712339665984,-0.380121497532)); +#1306 = CARTESIAN_POINT('',(4.712340203113,-0.332471368907)); +#1307 = CARTESIAN_POINT('',(4.712340740242,-0.283760277135)); +#1308 = CARTESIAN_POINT('',(4.712341277371,-0.233952389667)); +#1309 = CARTESIAN_POINT('',(4.7123418145,-0.183010242723)); +#1310 = CARTESIAN_POINT('',(4.712342351628,-0.13089464653)); +#1311 = CARTESIAN_POINT('',(4.712342888756,-7.756458504956E-02)); +#1312 = CARTESIAN_POINT('',(4.712343425884,-2.297710823312E-02)); +#1313 = CARTESIAN_POINT('',(4.712343963012,3.291278326069E-02)); +#1314 = CARTESIAN_POINT('',(4.712344500139,9.015226186147E-02)); +#1315 = CARTESIAN_POINT('',(4.712345037266,0.148790805629)); +#1316 = CARTESIAN_POINT('',(4.712345574392,0.208880341544)); +#1317 = CARTESIAN_POINT('',(4.712346111519,0.270475396394)); +#1318 = CARTESIAN_POINT('',(4.712346648645,0.333633270948)); +#1319 = CARTESIAN_POINT('',(4.712347185771,0.398414183467)); +#1320 = CARTESIAN_POINT('',(4.712347722896,0.464881588854)); +#1321 = CARTESIAN_POINT('',(4.712348260021,0.533101909559)); +#1322 = CARTESIAN_POINT('',(4.712348618105,0.579798326335)); +#1323 = CARTESIAN_POINT('',(4.712348797146,0.603462247147)); +#1324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1325 = ORIENTED_EDGE('',*,*,#1326,.T.); +#1326 = EDGE_CURVE('',#1275,#1327,#1329,.T.); +#1327 = VERTEX_POINT('',#1328); +#1328 = CARTESIAN_POINT('',(-0.240592800216,107.02162092162, + -19.83526644707)); +#1329 = SURFACE_CURVE('',#1330,(#1334,#1341),.PCURVE_S1.); +#1330 = LINE('',#1331,#1332); +#1331 = CARTESIAN_POINT('',(-0.240592800216,107.02162092162, + -20.83526644707)); +#1332 = VECTOR('',#1333,1.); +#1333 = DIRECTION('',(-1.152780867537E-15,3.180277555754E-15,1.)); +#1334 = PCURVE('',#339,#1335); +#1335 = DEFINITIONAL_REPRESENTATION('',(#1336),#1340); +#1336 = LINE('',#1337,#1338); +#1337 = CARTESIAN_POINT('',(4.750000000001,6.050212444699)); +#1338 = VECTOR('',#1339,1.); +#1339 = DIRECTION('',(1.,2.6645352591E-14)); +#1340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1341 = PCURVE('',#1342,#1347); +#1342 = CYLINDRICAL_SURFACE('',#1343,1.7); +#1343 = AXIS2_PLACEMENT_3D('',#1344,#1345,#1346); +#1344 = CARTESIAN_POINT('',(-0.240504400126,105.3216209239, + -20.83526644707)); +#1345 = DIRECTION('',(1.152780867537E-15,5.701506641247E-15,-1.)); +#1346 = DIRECTION('',(1.,-1.484154846924E-13,1.152780867536E-15)); +#1347 = DEFINITIONAL_REPRESENTATION('',(#1348),#1352); +#1348 = LINE('',#1349,#1350); +#1349 = CARTESIAN_POINT('',(4.712336980332,1.06581410364E-14)); +#1350 = VECTOR('',#1351,1.); +#1351 = DIRECTION('',(0.,-1.)); +#1352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1353 = ORIENTED_EDGE('',*,*,#1354,.T.); +#1354 = EDGE_CURVE('',#1327,#1355,#1357,.T.); +#1355 = VERTEX_POINT('',#1356); +#1356 = CARTESIAN_POINT('',(-0.240592800216,108.02162092245, + -19.83526644707)); +#1357 = SURFACE_CURVE('',#1358,(#1362,#1369),.PCURVE_S1.); +#1358 = LINE('',#1359,#1360); +#1359 = CARTESIAN_POINT('',(-0.240592800216,103.14655897505, + -19.83526644707)); +#1360 = VECTOR('',#1361,1.); +#1361 = DIRECTION('',(-6.28663787695E-15,1.,7.205881598491E-17)); +#1362 = PCURVE('',#339,#1363); +#1363 = DEFINITIONAL_REPRESENTATION('',(#1364),#1368); +#1364 = LINE('',#1365,#1366); +#1365 = CARTESIAN_POINT('',(5.750000000001,2.175150498122)); +#1366 = VECTOR('',#1367,1.); +#1367 = DIRECTION('',(-2.339301621926E-14,1.)); +#1368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1369 = PCURVE('',#1370,#1375); +#1370 = PLANE('',#1371); +#1371 = AXIS2_PLACEMENT_3D('',#1372,#1373,#1374); +#1372 = CARTESIAN_POINT('',(-0.2405929494,100.97140847692, + -19.83526644707)); +#1373 = DIRECTION('',(-6.906312354633E-17,-3.602940798568E-17,1.)); +#1374 = DIRECTION('',(-5.261416302648E-15,1.,3.602940798568E-17)); +#1375 = DEFINITIONAL_REPRESENTATION('',(#1376),#1380); +#1376 = LINE('',#1377,#1378); +#1377 = CARTESIAN_POINT('',(2.175150498123,-1.491833714431E-07)); +#1378 = VECTOR('',#1379,1.); +#1379 = DIRECTION('',(1.,1.025221574301E-15)); +#1380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1381 = ORIENTED_EDGE('',*,*,#1382,.T.); +#1382 = EDGE_CURVE('',#1355,#1383,#1385,.T.); +#1383 = VERTEX_POINT('',#1384); +#1384 = CARTESIAN_POINT('',(-0.240592800216,108.02162092245, + -9.735266447075)); +#1385 = SURFACE_CURVE('',#1386,(#1390,#1397),.PCURVE_S1.); +#1386 = LINE('',#1387,#1388); +#1387 = CARTESIAN_POINT('',(-0.240592800216,108.02162092245, + -10.83526644707)); +#1388 = VECTOR('',#1389,1.); +#1389 = DIRECTION('',(-4.745329621804E-16,-7.646979113944E-16,1.)); +#1390 = PCURVE('',#339,#1391); +#1391 = DEFINITIONAL_REPRESENTATION('',(#1392),#1396); +#1392 = LINE('',#1393,#1394); +#1393 = CARTESIAN_POINT('',(14.750000000001,7.050212445524)); +#1394 = VECTOR('',#1395,1.); +#1395 = DIRECTION('',(1.,2.270037712386E-14)); +#1396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1397 = PCURVE('',#1398,#1403); +#1398 = CYLINDRICAL_SURFACE('',#1399,2.7); +#1399 = AXIS2_PLACEMENT_3D('',#1400,#1401,#1402); +#1400 = CARTESIAN_POINT('',(-0.240504400127,105.3216209239, + -10.83526644707)); +#1401 = DIRECTION('',(4.745329621804E-16,7.646979113944E-16,-1.)); +#1402 = DIRECTION('',(1.,-2.409557221457E-29,4.745329621804E-16)); +#1403 = DEFINITIONAL_REPRESENTATION('',(#1404),#1408); +#1404 = LINE('',#1405,#1406); +#1405 = CARTESIAN_POINT('',(-1.570829067569,1.7763568394E-15)); +#1406 = VECTOR('',#1407,1.); +#1407 = DIRECTION('',(0.,-1.)); +#1408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1409 = ORIENTED_EDGE('',*,*,#1410,.T.); +#1410 = EDGE_CURVE('',#1383,#1411,#1413,.T.); +#1411 = VERTEX_POINT('',#1412); +#1412 = CARTESIAN_POINT('',(-0.240592800217,106.82162092129, + -9.735266447075)); +#1413 = SURFACE_CURVE('',#1414,(#1418,#1425),.PCURVE_S1.); +#1414 = LINE('',#1415,#1416); +#1415 = CARTESIAN_POINT('',(-0.240592800216,103.14655897505, + -9.735266447075)); +#1416 = VECTOR('',#1417,1.); +#1417 = DIRECTION('',(6.28663787695E-15,-1.,-7.205881598492E-17)); +#1418 = PCURVE('',#339,#1419); +#1419 = DEFINITIONAL_REPRESENTATION('',(#1420),#1424); +#1420 = LINE('',#1421,#1422); +#1421 = CARTESIAN_POINT('',(15.850000000001,2.175150498122)); +#1422 = VECTOR('',#1423,1.); +#1423 = DIRECTION('',(2.339301621926E-14,-1.)); +#1424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1425 = PCURVE('',#1426,#1431); +#1426 = PLANE('',#1427); +#1427 = AXIS2_PLACEMENT_3D('',#1428,#1429,#1430); +#1428 = CARTESIAN_POINT('',(2.809365050599,100.93621547692, + -9.735266447075)); +#1429 = DIRECTION('',(-6.906312355993E-17,-3.602940798565E-17,1.)); +#1430 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798565E-17)); +#1431 = DEFINITIONAL_REPRESENTATION('',(#1432),#1436); +#1432 = LINE('',#1433,#1434); +#1433 = CARTESIAN_POINT('',(2.210343498128,3.049957850815)); +#1434 = VECTOR('',#1435,1.); +#1435 = DIRECTION('',(-1.,-4.423544863809E-16)); +#1436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1437 = ORIENTED_EDGE('',*,*,#1438,.T.); +#1438 = EDGE_CURVE('',#1411,#1439,#1441,.T.); +#1439 = VERTEX_POINT('',#1440); +#1440 = CARTESIAN_POINT('',(-0.240592800217,106.82162092129, + -7.735266447075)); +#1441 = SURFACE_CURVE('',#1442,(#1446,#1453),.PCURVE_S1.); +#1442 = LINE('',#1443,#1444); +#1443 = CARTESIAN_POINT('',(-0.240592800217,106.82162092129, + -10.83526644707)); +#1444 = VECTOR('',#1445,1.); +#1445 = DIRECTION('',(-6.938893903907E-17,-1.262177448354E-29,1.)); +#1446 = PCURVE('',#339,#1447); +#1447 = DEFINITIONAL_REPRESENTATION('',(#1448),#1452); +#1448 = LINE('',#1449,#1450); +#1449 = CARTESIAN_POINT('',(14.75,5.850212444366)); +#1450 = VECTOR('',#1451,1.); +#1451 = DIRECTION('',(1.,2.346507503525E-14)); +#1452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1453 = PCURVE('',#1454,#1459); +#1454 = CYLINDRICAL_SURFACE('',#1455,1.5); +#1455 = AXIS2_PLACEMENT_3D('',#1456,#1457,#1458); +#1456 = CARTESIAN_POINT('',(-0.240504400127,105.3216209239, + -10.83526644707)); +#1457 = DIRECTION('',(-6.938893903907E-17,-1.262177448354E-29,1.)); +#1458 = DIRECTION('',(1.,5.660586370697E-15,6.938893903907E-17)); +#1459 = DEFINITIONAL_REPRESENTATION('',(#1460),#1464); +#1460 = LINE('',#1461,#1462); +#1461 = CARTESIAN_POINT('',(1.570855260188,0.)); +#1462 = VECTOR('',#1463,1.); +#1463 = DIRECTION('',(0.,1.)); +#1464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1465 = ORIENTED_EDGE('',*,*,#1466,.F.); +#1466 = EDGE_CURVE('',#1227,#1439,#1467,.T.); +#1467 = SURFACE_CURVE('',#1468,(#1472,#1479),.PCURVE_S1.); +#1468 = LINE('',#1469,#1470); +#1469 = CARTESIAN_POINT('',(-0.240592800217,112.43621547692, + -7.735266447075)); +#1470 = VECTOR('',#1471,1.); +#1471 = DIRECTION('',(-1.803291440775E-13,-1.,-3.602940798568E-17)); +#1472 = PCURVE('',#339,#1473); +#1473 = DEFINITIONAL_REPRESENTATION('',(#1474),#1478); +#1474 = LINE('',#1475,#1476); +#1475 = CARTESIAN_POINT('',(17.85,11.464806999993)); +#1476 = VECTOR('',#1477,1.); +#1477 = DIRECTION('',(2.342904562726E-14,-1.)); +#1478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1479 = PCURVE('',#811,#1480); +#1480 = DEFINITIONAL_REPRESENTATION('',(#1481),#1485); +#1481 = LINE('',#1482,#1483); +#1482 = CARTESIAN_POINT('',(11.499999999999,3.049957850816)); +#1483 = VECTOR('',#1484,1.); +#1484 = DIRECTION('',(-1.,1.86173427468E-13)); +#1485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1486 = ORIENTED_EDGE('',*,*,#1226,.F.); +#1487 = ORIENTED_EDGE('',*,*,#323,.F.); +#1488 = ORIENTED_EDGE('',*,*,#1489,.F.); +#1489 = EDGE_CURVE('',#1490,#269,#1492,.T.); +#1490 = VERTEX_POINT('',#1491); +#1491 = CARTESIAN_POINT('',(-0.240592800216,109.47636392215, + -21.83526644707)); +#1492 = SURFACE_CURVE('',#1493,(#1497,#1504),.PCURVE_S1.); +#1493 = LINE('',#1494,#1495); +#1494 = CARTESIAN_POINT('',(-0.240592800216,109.47636392214, + -10.83526644707)); +#1495 = VECTOR('',#1496,1.); +#1496 = DIRECTION('',(4.255784291194E-17,-9.59831506504E-16,-1.)); +#1497 = PCURVE('',#339,#1498); +#1498 = DEFINITIONAL_REPRESENTATION('',(#1499),#1503); +#1499 = LINE('',#1500,#1501); +#1500 = CARTESIAN_POINT('',(14.75,8.504955445211)); +#1501 = VECTOR('',#1502,1.); +#1502 = DIRECTION('',(-1.,-2.442490654175E-14)); +#1503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1504 = PCURVE('',#289,#1505); +#1505 = DEFINITIONAL_REPRESENTATION('',(#1506),#1510); +#1506 = LINE('',#1507,#1508); +#1507 = CARTESIAN_POINT('',(-3.996851814581E-05,-3.552713678801E-15)); +#1508 = VECTOR('',#1509,1.); +#1509 = DIRECTION('',(0.,1.)); +#1510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1511 = ORIENTED_EDGE('',*,*,#1512,.T.); +#1512 = EDGE_CURVE('',#1490,#1277,#1513,.T.); +#1513 = SURFACE_CURVE('',#1514,(#1518,#1525),.PCURVE_S1.); +#1514 = LINE('',#1515,#1516); +#1515 = CARTESIAN_POINT('',(-0.240592800216,97.82480225344, + -21.83526644707)); +#1516 = VECTOR('',#1517,1.); +#1517 = DIRECTION('',(5.703770789029E-15,-1.,-3.602940798575E-17)); +#1518 = PCURVE('',#339,#1519); +#1519 = DEFINITIONAL_REPRESENTATION('',(#1520),#1524); +#1520 = LINE('',#1521,#1522); +#1521 = CARTESIAN_POINT('',(3.75,-3.146606223489)); +#1522 = VECTOR('',#1523,1.); +#1523 = DIRECTION('',(2.342904562726E-14,-1.)); +#1524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1525 = PCURVE('',#1526,#1531); +#1526 = PLANE('',#1527); +#1527 = AXIS2_PLACEMENT_3D('',#1528,#1529,#1530); +#1528 = CARTESIAN_POINT('',(-0.2405929494,100.97140847692, + -21.83526644707)); +#1529 = DIRECTION('',(-6.906312354635E-17,-3.602940798575E-17,1.)); +#1530 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798575E-17)); +#1531 = DEFINITIONAL_REPRESENTATION('',(#1532),#1536); +#1532 = LINE('',#1533,#1534); +#1533 = CARTESIAN_POINT('',(-3.146606223488,-1.491838816215E-07)); +#1534 = VECTOR('',#1535,1.); +#1535 = DIRECTION('',(-1.,1.405126015397E-16)); +#1536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1537 = ADVANCED_FACE('',(#1538),#289,.F.); +#1538 = FACE_BOUND('',#1539,.F.); +#1539 = EDGE_LOOP('',(#1540,#1541,#1565,#1586)); +#1540 = ORIENTED_EDGE('',*,*,#1489,.F.); +#1541 = ORIENTED_EDGE('',*,*,#1542,.F.); +#1542 = EDGE_CURVE('',#1543,#1490,#1545,.T.); +#1543 = VERTEX_POINT('',#1544); +#1544 = CARTESIAN_POINT('',(1.96457210581,107.43621550726, + -21.83526644707)); +#1545 = SURFACE_CURVE('',#1546,(#1551,#1558),.PCURVE_S1.); +#1546 = CIRCLE('',#1547,2.211743); +#1547 = AXIS2_PLACEMENT_3D('',#1548,#1549,#1550); +#1548 = CARTESIAN_POINT('',(-0.240504400126,107.2646209239, + -21.83526644707)); +#1549 = DIRECTION('',(-6.906312354635E-17,-3.602940798575E-17,1.)); +#1550 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798575E-17)); +#1551 = PCURVE('',#289,#1552); +#1552 = DEFINITIONAL_REPRESENTATION('',(#1553),#1557); +#1553 = LINE('',#1554,#1555); +#1554 = CARTESIAN_POINT('',(6.28318530718,11.)); +#1555 = VECTOR('',#1556,1.); +#1556 = DIRECTION('',(-1.,-2.379301873556E-15)); +#1557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1558 = PCURVE('',#1526,#1559); +#1559 = DEFINITIONAL_REPRESENTATION('',(#1560),#1564); +#1560 = CIRCLE('',#1561,2.211743); +#1561 = AXIS2_PLACEMENT_2D('',#1562,#1563); +#1562 = CARTESIAN_POINT('',(6.293212446979,-8.854927383478E-05)); +#1563 = DIRECTION('',(1.,-2.488303455022E-33)); +#1564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1565 = ORIENTED_EDGE('',*,*,#1566,.T.); +#1566 = EDGE_CURVE('',#1543,#241,#1567,.T.); +#1567 = SURFACE_CURVE('',#1568,(#1572,#1579),.PCURVE_S1.); +#1568 = LINE('',#1569,#1570); +#1569 = CARTESIAN_POINT('',(1.964572105805,107.43621550726, + -10.83526644707)); +#1570 = VECTOR('',#1571,1.); +#1571 = DIRECTION('',(4.255784291194E-17,-9.59831506504E-16,-1.)); +#1572 = PCURVE('',#289,#1573); +#1573 = DEFINITIONAL_REPRESENTATION('',(#1574),#1578); +#1574 = LINE('',#1575,#1576); +#1575 = CARTESIAN_POINT('',(1.493134864943,0.)); +#1576 = VECTOR('',#1577,1.); +#1577 = DIRECTION('',(-1.184272615104E-15,1.)); +#1578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1579 = PCURVE('',#256,#1580); +#1580 = DEFINITIONAL_REPRESENTATION('',(#1581),#1585); +#1581 = LINE('',#1582,#1583); +#1582 = CARTESIAN_POINT('',(-23.99982408356,-8.305080905977)); +#1583 = VECTOR('',#1584,1.); +#1584 = DIRECTION('',(1.,1.110223024625E-15)); +#1585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1586 = ORIENTED_EDGE('',*,*,#268,.T.); +#1587 = ADVANCED_FACE('',(#1588),#256,.T.); +#1588 = FACE_BOUND('',#1589,.T.); +#1589 = EDGE_LOOP('',(#1590,#1591,#1611,#1612,#1635,#1663,#1691,#1712)); +#1590 = ORIENTED_EDGE('',*,*,#240,.F.); +#1591 = ORIENTED_EDGE('',*,*,#1592,.T.); +#1592 = EDGE_CURVE('',#214,#675,#1593,.T.); +#1593 = SURFACE_CURVE('',#1594,(#1598,#1604),.PCURVE_S1.); +#1594 = LINE('',#1595,#1596); +#1595 = CARTESIAN_POINT('',(2.2593,107.43621550726,-37.58509526531)); +#1596 = VECTOR('',#1597,1.); +#1597 = DIRECTION('',(0.,2.346507503525E-14,-1.)); +#1598 = PCURVE('',#256,#1599); +#1599 = DEFINITIONAL_REPRESENTATION('',(#1600),#1603); +#1600 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1601,#1602),.UNSPECIFIED.,.F., + .F.,(2,2),(-10.24999526531,-2.250004734681),.PIECEWISE_BEZIER_KNOTS.); +#1601 = CARTESIAN_POINT('',(-7.499990530636,-8.599808800172)); +#1602 = CARTESIAN_POINT('',(0.500000000001,-8.599808800172)); +#1603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1604 = PCURVE('',#228,#1605); +#1605 = DEFINITIONAL_REPRESENTATION('',(#1606),#1610); +#1606 = LINE('',#1607,#1608); +#1607 = CARTESIAN_POINT('',(2.750004734682,-4.286215507268)); +#1608 = VECTOR('',#1609,1.); +#1609 = DIRECTION('',(-1.,-2.346507503525E-14)); +#1610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1611 = ORIENTED_EDGE('',*,*,#674,.F.); +#1612 = ORIENTED_EDGE('',*,*,#1613,.T.); +#1613 = EDGE_CURVE('',#642,#1614,#1616,.T.); +#1614 = VERTEX_POINT('',#1615); +#1615 = CARTESIAN_POINT('',(-0.240592800216,107.43621550726, + -34.83526644707)); +#1616 = SURFACE_CURVE('',#1617,(#1621,#1628),.PCURVE_S1.); +#1617 = LINE('',#1618,#1619); +#1618 = CARTESIAN_POINT('',(-0.240592800216,107.43621550726, + -30.21017848885)); +#1619 = VECTOR('',#1620,1.); +#1620 = DIRECTION('',(1.069399905187E-15,-8.824985388398E-14,1.)); +#1621 = PCURVE('',#256,#1622); +#1622 = DEFINITIONAL_REPRESENTATION('',(#1623),#1627); +#1623 = LINE('',#1624,#1625); +#1624 = CARTESIAN_POINT('',(-4.624912041781,-6.099915999956)); +#1625 = VECTOR('',#1626,1.); +#1626 = DIRECTION('',(-1.,-2.222180772724E-15)); +#1627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1628 = PCURVE('',#658,#1629); +#1629 = DEFINITIONAL_REPRESENTATION('',(#1630),#1634); +#1630 = LINE('',#1631,#1632); +#1631 = CARTESIAN_POINT('',(-4.62491204178,6.464807030338)); +#1632 = VECTOR('',#1633,1.); +#1633 = DIRECTION('',(1.,-6.478477884873E-14)); +#1634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1635 = ORIENTED_EDGE('',*,*,#1636,.T.); +#1636 = EDGE_CURVE('',#1614,#1637,#1639,.T.); +#1637 = VERTEX_POINT('',#1638); +#1638 = CARTESIAN_POINT('',(1.959499999964,107.43621550726, + -34.83526644707)); +#1639 = SURFACE_CURVE('',#1640,(#1644,#1651),.PCURVE_S1.); +#1640 = LINE('',#1641,#1642); +#1641 = CARTESIAN_POINT('',(-5.390508800194,107.43621550726, + -34.83526644707)); +#1642 = VECTOR('',#1643,1.); +#1643 = DIRECTION('',(1.,-2.736459563192E-15,-1.47053451828E-14)); +#1644 = PCURVE('',#256,#1645); +#1645 = DEFINITIONAL_REPRESENTATION('',(#1646),#1650); +#1646 = LINE('',#1647,#1648); +#1647 = CARTESIAN_POINT('',(1.759164404984E-04,-0.949999999978)); +#1648 = VECTOR('',#1649,1.); +#1649 = DIRECTION('',(1.585812605033E-14,-1.)); +#1650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1651 = PCURVE('',#1652,#1657); +#1652 = PLANE('',#1653); +#1653 = AXIS2_PLACEMENT_3D('',#1654,#1655,#1656); +#1654 = CARTESIAN_POINT('',(-4.440508800217,112.83143981467, + -34.83526644707)); +#1655 = DIRECTION('',(1.47053451828E-14,5.9135856969E-14,1.)); +#1656 = DIRECTION('',(-5.641721951872E-11,-1.,5.913585696983E-14)); +#1657 = DEFINITIONAL_REPRESENTATION('',(#1658),#1662); +#1658 = LINE('',#1659,#1660); +#1659 = CARTESIAN_POINT('',(5.395224307457,-0.949999999673)); +#1660 = VECTOR('',#1661,1.); +#1661 = DIRECTION('',(-5.641448305916E-11,1.)); +#1662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1663 = ORIENTED_EDGE('',*,*,#1664,.T.); +#1664 = EDGE_CURVE('',#1637,#1665,#1667,.T.); +#1665 = VERTEX_POINT('',#1666); +#1666 = CARTESIAN_POINT('',(1.959499999963,107.43621550726, + -21.83526644707)); +#1667 = SURFACE_CURVE('',#1668,(#1672,#1679),.PCURVE_S1.); +#1668 = LINE('',#1669,#1670); +#1669 = CARTESIAN_POINT('',(1.959499999963,107.43621550726, + -20.61267848885)); +#1670 = VECTOR('',#1671,1.); +#1671 = DIRECTION('',(-6.253645076815E-15,-8.824985388398E-14,1.)); +#1672 = PCURVE('',#256,#1673); +#1673 = DEFINITIONAL_REPRESENTATION('',(#1674),#1678); +#1674 = LINE('',#1675,#1676); +#1675 = CARTESIAN_POINT('',(-14.22241204178,-8.300008800135)); +#1676 = VECTOR('',#1677,1.); +#1677 = DIRECTION('',(-1.,5.100864209279E-15)); +#1678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1679 = PCURVE('',#1680,#1685); +#1680 = PLANE('',#1681); +#1681 = AXIS2_PLACEMENT_3D('',#1682,#1683,#1684); +#1682 = CARTESIAN_POINT('',(1.959499999963,74.6,-6.390266447076)); +#1683 = DIRECTION('',(1.,1.075236589286E-27,6.253645076815E-15)); +#1684 = DIRECTION('',(-1.112430597351E-27,1.,5.947572592834E-15)); +#1685 = DEFINITIONAL_REPRESENTATION('',(#1686),#1690); +#1686 = LINE('',#1687,#1688); +#1687 = CARTESIAN_POINT('',(32.836215507267,-14.22241204177)); +#1688 = VECTOR('',#1689,1.); +#1689 = DIRECTION('',(-8.230228129115E-14,1.)); +#1690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1691 = ORIENTED_EDGE('',*,*,#1692,.F.); +#1692 = EDGE_CURVE('',#1543,#1665,#1693,.T.); +#1693 = SURFACE_CURVE('',#1694,(#1698,#1705),.PCURVE_S1.); +#1694 = LINE('',#1695,#1696); +#1695 = CARTESIAN_POINT('',(-3.290550874786,107.43621550726, + -21.83526644707)); +#1696 = VECTOR('',#1697,1.); +#1697 = DIRECTION('',(-1.,-5.844283390569E-15,-6.906312354635E-17)); +#1698 = PCURVE('',#256,#1699); +#1699 = DEFINITIONAL_REPRESENTATION('',(#1700),#1704); +#1700 = LINE('',#1701,#1702); +#1701 = CARTESIAN_POINT('',(-12.99982408356,-3.049957925386)); +#1702 = VECTOR('',#1703,1.); +#1703 = DIRECTION('',(-1.083717743991E-15,1.)); +#1704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1705 = PCURVE('',#1526,#1706); +#1706 = DEFINITIONAL_REPRESENTATION('',(#1707),#1711); +#1707 = LINE('',#1708,#1709); +#1708 = CARTESIAN_POINT('',(6.46480703034,3.049957925386)); +#1709 = VECTOR('',#1710,1.); +#1710 = DIRECTION('',(-2.997920270185E-29,1.)); +#1711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1712 = ORIENTED_EDGE('',*,*,#1566,.T.); +#1713 = ADVANCED_FACE('',(#1714,#1861),#228,.F.); +#1714 = FACE_BOUND('',#1715,.F.); +#1715 = EDGE_LOOP('',(#1716,#1739,#1762,#1790,#1813,#1837,#1858,#1859, + #1860)); +#1716 = ORIENTED_EDGE('',*,*,#1717,.F.); +#1717 = EDGE_CURVE('',#1718,#698,#1720,.T.); +#1718 = VERTEX_POINT('',#1719); +#1719 = CARTESIAN_POINT('',(2.2593,103.15,-40.3351)); +#1720 = SURFACE_CURVE('',#1721,(#1725,#1732),.PCURVE_S1.); +#1721 = LINE('',#1722,#1723); +#1722 = CARTESIAN_POINT('',(2.2593,103.15,-40.3351)); +#1723 = VECTOR('',#1724,1.); +#1724 = DIRECTION('',(0.,0.,1.)); +#1725 = PCURVE('',#228,#1726); +#1726 = DEFINITIONAL_REPRESENTATION('',(#1727),#1731); +#1727 = LINE('',#1728,#1729); +#1728 = CARTESIAN_POINT('',(0.,0.)); +#1729 = VECTOR('',#1730,1.); +#1730 = DIRECTION('',(1.,0.)); +#1731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1732 = PCURVE('',#398,#1733); +#1733 = DEFINITIONAL_REPRESENTATION('',(#1734),#1738); +#1734 = LINE('',#1735,#1736); +#1735 = CARTESIAN_POINT('',(0.,0.)); +#1736 = VECTOR('',#1737,1.); +#1737 = DIRECTION('',(1.,0.)); +#1738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1739 = ORIENTED_EDGE('',*,*,#1740,.F.); +#1740 = EDGE_CURVE('',#1741,#1718,#1743,.T.); +#1741 = VERTEX_POINT('',#1742); +#1742 = CARTESIAN_POINT('',(2.2593,118.9862,-40.3351)); +#1743 = SURFACE_CURVE('',#1744,(#1748,#1755),.PCURVE_S1.); +#1744 = LINE('',#1745,#1746); +#1745 = CARTESIAN_POINT('',(2.2593,118.9862,-40.3351)); +#1746 = VECTOR('',#1747,1.); +#1747 = DIRECTION('',(0.,-1.,0.)); +#1748 = PCURVE('',#228,#1749); +#1749 = DEFINITIONAL_REPRESENTATION('',(#1750),#1754); +#1750 = LINE('',#1751,#1752); +#1751 = CARTESIAN_POINT('',(0.,-15.8362)); +#1752 = VECTOR('',#1753,1.); +#1753 = DIRECTION('',(0.,1.)); +#1754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1755 = PCURVE('',#426,#1756); +#1756 = DEFINITIONAL_REPRESENTATION('',(#1757),#1761); +#1757 = LINE('',#1758,#1759); +#1758 = CARTESIAN_POINT('',(0.,15.8362)); +#1759 = VECTOR('',#1760,1.); +#1760 = DIRECTION('',(0.,-1.)); +#1761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1762 = ORIENTED_EDGE('',*,*,#1763,.F.); +#1763 = EDGE_CURVE('',#1764,#1741,#1766,.T.); +#1764 = VERTEX_POINT('',#1765); +#1765 = CARTESIAN_POINT('',(2.2593,120.6862,-38.6351)); +#1766 = SURFACE_CURVE('',#1767,(#1772,#1783),.PCURVE_S1.); +#1767 = CIRCLE('',#1768,1.7); +#1768 = AXIS2_PLACEMENT_3D('',#1769,#1770,#1771); +#1769 = CARTESIAN_POINT('',(2.2593,118.9862,-38.6351)); +#1770 = DIRECTION('',(-1.,0.,-0.)); +#1771 = DIRECTION('',(-0.,0.,1.)); +#1772 = PCURVE('',#228,#1773); +#1773 = DEFINITIONAL_REPRESENTATION('',(#1774),#1782); +#1774 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1775,#1776,#1777,#1778, +#1779,#1780,#1781),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1775 = CARTESIAN_POINT('',(3.4,-15.8362)); +#1776 = CARTESIAN_POINT('',(3.4,-18.78068637286)); +#1777 = CARTESIAN_POINT('',(0.85,-17.30844318643)); +#1778 = CARTESIAN_POINT('',(-1.7,-15.8362)); +#1779 = CARTESIAN_POINT('',(0.85,-14.36395681356)); +#1780 = CARTESIAN_POINT('',(3.4,-12.89171362713)); +#1781 = CARTESIAN_POINT('',(3.4,-15.8362)); +#1782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1783 = PCURVE('',#459,#1784); +#1784 = DEFINITIONAL_REPRESENTATION('',(#1785),#1789); +#1785 = LINE('',#1786,#1787); +#1786 = CARTESIAN_POINT('',(1.570796326795,-0.)); +#1787 = VECTOR('',#1788,1.); +#1788 = DIRECTION('',(-1.,0.)); +#1789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1790 = ORIENTED_EDGE('',*,*,#1791,.T.); +#1791 = EDGE_CURVE('',#1764,#1792,#1794,.T.); +#1792 = VERTEX_POINT('',#1793); +#1793 = CARTESIAN_POINT('',(2.2593,120.6862,-29.0351)); +#1794 = SURFACE_CURVE('',#1795,(#1799,#1806),.PCURVE_S1.); +#1795 = LINE('',#1796,#1797); +#1796 = CARTESIAN_POINT('',(2.2593,120.6862,-40.3351)); +#1797 = VECTOR('',#1798,1.); +#1798 = DIRECTION('',(0.,0.,1.)); +#1799 = PCURVE('',#228,#1800); +#1800 = DEFINITIONAL_REPRESENTATION('',(#1801),#1805); +#1801 = LINE('',#1802,#1803); +#1802 = CARTESIAN_POINT('',(0.,-17.5362)); +#1803 = VECTOR('',#1804,1.); +#1804 = DIRECTION('',(1.,0.)); +#1805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1806 = PCURVE('',#487,#1807); +#1807 = DEFINITIONAL_REPRESENTATION('',(#1808),#1812); +#1808 = LINE('',#1809,#1810); +#1809 = CARTESIAN_POINT('',(0.,0.)); +#1810 = VECTOR('',#1811,1.); +#1811 = DIRECTION('',(1.,0.)); +#1812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1813 = ORIENTED_EDGE('',*,*,#1814,.T.); +#1814 = EDGE_CURVE('',#1792,#1815,#1817,.T.); +#1815 = VERTEX_POINT('',#1816); +#1816 = CARTESIAN_POINT('',(2.2593,118.9862,-27.3351)); +#1817 = SURFACE_CURVE('',#1818,(#1823,#1830),.PCURVE_S1.); +#1818 = CIRCLE('',#1819,1.7); +#1819 = AXIS2_PLACEMENT_3D('',#1820,#1821,#1822); +#1820 = CARTESIAN_POINT('',(2.2593,118.9862,-29.0351)); +#1821 = DIRECTION('',(1.,0.,0.)); +#1822 = DIRECTION('',(-0.,0.,1.)); +#1823 = PCURVE('',#228,#1824); +#1824 = DEFINITIONAL_REPRESENTATION('',(#1825),#1829); +#1825 = CIRCLE('',#1826,1.7); +#1826 = AXIS2_PLACEMENT_2D('',#1827,#1828); +#1827 = CARTESIAN_POINT('',(11.3,-15.8362)); +#1828 = DIRECTION('',(1.,0.)); +#1829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1830 = PCURVE('',#516,#1831); +#1831 = DEFINITIONAL_REPRESENTATION('',(#1832),#1836); +#1832 = LINE('',#1833,#1834); +#1833 = CARTESIAN_POINT('',(-4.712388980385,0.)); +#1834 = VECTOR('',#1835,1.); +#1835 = DIRECTION('',(1.,0.)); +#1836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1837 = ORIENTED_EDGE('',*,*,#1838,.F.); +#1838 = EDGE_CURVE('',#187,#1815,#1839,.T.); +#1839 = SURFACE_CURVE('',#1840,(#1844,#1851),.PCURVE_S1.); +#1840 = LINE('',#1841,#1842); +#1841 = CARTESIAN_POINT('',(2.2593,107.93620600756,-27.3351)); +#1842 = VECTOR('',#1843,1.); +#1843 = DIRECTION('',(0.,1.,0.)); +#1844 = PCURVE('',#228,#1845); +#1845 = DEFINITIONAL_REPRESENTATION('',(#1846),#1850); +#1846 = LINE('',#1847,#1848); +#1847 = CARTESIAN_POINT('',(13.,-4.786206007566)); +#1848 = VECTOR('',#1849,1.); +#1849 = DIRECTION('',(0.,-1.)); +#1850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1851 = PCURVE('',#201,#1852); +#1852 = DEFINITIONAL_REPRESENTATION('',(#1853),#1857); +#1853 = LINE('',#1854,#1855); +#1854 = CARTESIAN_POINT('',(0.,4.786206007566)); +#1855 = VECTOR('',#1856,1.); +#1856 = DIRECTION('',(0.,1.)); +#1857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1858 = ORIENTED_EDGE('',*,*,#213,.T.); +#1859 = ORIENTED_EDGE('',*,*,#1592,.T.); +#1860 = ORIENTED_EDGE('',*,*,#697,.T.); +#1861 = FACE_BOUND('',#1862,.F.); +#1862 = EDGE_LOOP('',(#1863)); +#1863 = ORIENTED_EDGE('',*,*,#1864,.F.); +#1864 = EDGE_CURVE('',#1865,#1865,#1867,.T.); +#1865 = VERTEX_POINT('',#1866); +#1866 = CARTESIAN_POINT('',(2.2593,113.6862,-29.3351)); +#1867 = SURFACE_CURVE('',#1868,(#1873,#1880),.PCURVE_S1.); +#1868 = CIRCLE('',#1869,4.5); +#1869 = AXIS2_PLACEMENT_3D('',#1870,#1871,#1872); +#1870 = CARTESIAN_POINT('',(2.2593,113.6862,-33.8351)); +#1871 = DIRECTION('',(1.,0.,0.)); +#1872 = DIRECTION('',(-0.,0.,1.)); +#1873 = PCURVE('',#228,#1874); +#1874 = DEFINITIONAL_REPRESENTATION('',(#1875),#1879); +#1875 = CIRCLE('',#1876,4.5); +#1876 = AXIS2_PLACEMENT_2D('',#1877,#1878); +#1877 = CARTESIAN_POINT('',(6.5,-10.5362)); +#1878 = DIRECTION('',(1.,0.)); +#1879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1880 = PCURVE('',#1881,#1886); +#1881 = CYLINDRICAL_SURFACE('',#1882,4.5); +#1882 = AXIS2_PLACEMENT_3D('',#1883,#1884,#1885); +#1883 = CARTESIAN_POINT('',(2.0093,113.6862,-33.8351)); +#1884 = DIRECTION('',(1.,0.,0.)); +#1885 = DIRECTION('',(-0.,0.,1.)); +#1886 = DEFINITIONAL_REPRESENTATION('',(#1887),#1891); +#1887 = LINE('',#1888,#1889); +#1888 = CARTESIAN_POINT('',(0.,0.25)); +#1889 = VECTOR('',#1890,1.); +#1890 = DIRECTION('',(1.,0.)); +#1891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1892 = ADVANCED_FACE('',(#1893),#201,.T.); +#1893 = FACE_BOUND('',#1894,.T.); +#1894 = EDGE_LOOP('',(#1895,#1896,#1897,#1898)); +#1895 = ORIENTED_EDGE('',*,*,#1838,.F.); +#1896 = ORIENTED_EDGE('',*,*,#186,.T.); +#1897 = ORIENTED_EDGE('',*,*,#528,.F.); +#1898 = ORIENTED_EDGE('',*,*,#1899,.F.); +#1899 = EDGE_CURVE('',#1815,#500,#1900,.T.); +#1900 = SURFACE_CURVE('',#1901,(#1905,#1912),.PCURVE_S1.); +#1901 = LINE('',#1902,#1903); +#1902 = CARTESIAN_POINT('',(2.2593,118.9862,-27.3351)); +#1903 = VECTOR('',#1904,1.); +#1904 = DIRECTION('',(1.,0.,0.)); +#1905 = PCURVE('',#201,#1906); +#1906 = DEFINITIONAL_REPRESENTATION('',(#1907),#1911); +#1907 = LINE('',#1908,#1909); +#1908 = CARTESIAN_POINT('',(0.,15.8362)); +#1909 = VECTOR('',#1910,1.); +#1910 = DIRECTION('',(1.,0.)); +#1911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1912 = PCURVE('',#516,#1913); +#1913 = DEFINITIONAL_REPRESENTATION('',(#1914),#1918); +#1914 = LINE('',#1915,#1916); +#1915 = CARTESIAN_POINT('',(1.570796326795,0.)); +#1916 = VECTOR('',#1917,1.); +#1917 = DIRECTION('',(0.,1.)); +#1918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1919 = ADVANCED_FACE('',(#1920),#398,.F.); +#1920 = FACE_BOUND('',#1921,.F.); +#1921 = EDGE_LOOP('',(#1922,#1923,#1944,#1945)); +#1922 = ORIENTED_EDGE('',*,*,#380,.F.); +#1923 = ORIENTED_EDGE('',*,*,#1924,.F.); +#1924 = EDGE_CURVE('',#1718,#381,#1925,.T.); +#1925 = SURFACE_CURVE('',#1926,(#1930,#1937),.PCURVE_S1.); +#1926 = LINE('',#1927,#1928); +#1927 = CARTESIAN_POINT('',(2.2593,103.15,-40.3351)); +#1928 = VECTOR('',#1929,1.); +#1929 = DIRECTION('',(1.,0.,0.)); +#1930 = PCURVE('',#398,#1931); +#1931 = DEFINITIONAL_REPRESENTATION('',(#1932),#1936); +#1932 = LINE('',#1933,#1934); +#1933 = CARTESIAN_POINT('',(0.,0.)); +#1934 = VECTOR('',#1935,1.); +#1935 = DIRECTION('',(0.,1.)); +#1936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1937 = PCURVE('',#426,#1938); +#1938 = DEFINITIONAL_REPRESENTATION('',(#1939),#1943); +#1939 = LINE('',#1940,#1941); +#1940 = CARTESIAN_POINT('',(0.,0.)); +#1941 = VECTOR('',#1942,1.); +#1942 = DIRECTION('',(1.,0.)); +#1943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1944 = ORIENTED_EDGE('',*,*,#1717,.T.); +#1945 = ORIENTED_EDGE('',*,*,#725,.F.); +#1946 = ADVANCED_FACE('',(#1947),#426,.F.); +#1947 = FACE_BOUND('',#1948,.F.); +#1948 = EDGE_LOOP('',(#1949,#1950,#1951,#1972)); +#1949 = ORIENTED_EDGE('',*,*,#1924,.T.); +#1950 = ORIENTED_EDGE('',*,*,#410,.T.); +#1951 = ORIENTED_EDGE('',*,*,#1952,.F.); +#1952 = EDGE_CURVE('',#1741,#411,#1953,.T.); +#1953 = SURFACE_CURVE('',#1954,(#1958,#1965),.PCURVE_S1.); +#1954 = LINE('',#1955,#1956); +#1955 = CARTESIAN_POINT('',(2.2593,118.9862,-40.3351)); +#1956 = VECTOR('',#1957,1.); +#1957 = DIRECTION('',(1.,0.,0.)); +#1958 = PCURVE('',#426,#1959); +#1959 = DEFINITIONAL_REPRESENTATION('',(#1960),#1964); +#1960 = LINE('',#1961,#1962); +#1961 = CARTESIAN_POINT('',(0.,15.8362)); +#1962 = VECTOR('',#1963,1.); +#1963 = DIRECTION('',(1.,0.)); +#1964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1965 = PCURVE('',#459,#1966); +#1966 = DEFINITIONAL_REPRESENTATION('',(#1967),#1971); +#1967 = LINE('',#1968,#1969); +#1968 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#1969 = VECTOR('',#1970,1.); +#1970 = DIRECTION('',(-0.,1.)); +#1971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1972 = ORIENTED_EDGE('',*,*,#1740,.T.); +#1973 = ADVANCED_FACE('',(#1974),#459,.T.); +#1974 = FACE_BOUND('',#1975,.F.); +#1975 = EDGE_LOOP('',(#1976,#1977,#1978,#1979)); +#1976 = ORIENTED_EDGE('',*,*,#1763,.T.); +#1977 = ORIENTED_EDGE('',*,*,#1952,.T.); +#1978 = ORIENTED_EDGE('',*,*,#438,.F.); +#1979 = ORIENTED_EDGE('',*,*,#1980,.F.); +#1980 = EDGE_CURVE('',#1764,#439,#1981,.T.); +#1981 = SURFACE_CURVE('',#1982,(#1986,#1993),.PCURVE_S1.); +#1982 = LINE('',#1983,#1984); +#1983 = CARTESIAN_POINT('',(2.2593,120.6862,-38.6351)); +#1984 = VECTOR('',#1985,1.); +#1985 = DIRECTION('',(1.,0.,0.)); +#1986 = PCURVE('',#459,#1987); +#1987 = DEFINITIONAL_REPRESENTATION('',(#1988),#1992); +#1988 = LINE('',#1989,#1990); +#1989 = CARTESIAN_POINT('',(-0.,0.)); +#1990 = VECTOR('',#1991,1.); +#1991 = DIRECTION('',(-0.,1.)); +#1992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1993 = PCURVE('',#487,#1994); +#1994 = DEFINITIONAL_REPRESENTATION('',(#1995),#1999); +#1995 = LINE('',#1996,#1997); +#1996 = CARTESIAN_POINT('',(1.7,0.)); +#1997 = VECTOR('',#1998,1.); +#1998 = DIRECTION('',(0.,1.)); +#1999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2000 = ADVANCED_FACE('',(#2001),#487,.T.); +#2001 = FACE_BOUND('',#2002,.T.); +#2002 = EDGE_LOOP('',(#2003,#2004,#2005,#2006)); +#2003 = ORIENTED_EDGE('',*,*,#471,.F.); +#2004 = ORIENTED_EDGE('',*,*,#1980,.F.); +#2005 = ORIENTED_EDGE('',*,*,#1791,.T.); +#2006 = ORIENTED_EDGE('',*,*,#2007,.T.); +#2007 = EDGE_CURVE('',#1792,#472,#2008,.T.); +#2008 = SURFACE_CURVE('',#2009,(#2013,#2020),.PCURVE_S1.); +#2009 = LINE('',#2010,#2011); +#2010 = CARTESIAN_POINT('',(2.2593,120.6862,-29.0351)); +#2011 = VECTOR('',#2012,1.); +#2012 = DIRECTION('',(1.,0.,0.)); +#2013 = PCURVE('',#487,#2014); +#2014 = DEFINITIONAL_REPRESENTATION('',(#2015),#2019); +#2015 = LINE('',#2016,#2017); +#2016 = CARTESIAN_POINT('',(11.3,0.)); +#2017 = VECTOR('',#2018,1.); +#2018 = DIRECTION('',(0.,1.)); +#2019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2020 = PCURVE('',#516,#2021); +#2021 = DEFINITIONAL_REPRESENTATION('',(#2022),#2026); +#2022 = LINE('',#2023,#2024); +#2023 = CARTESIAN_POINT('',(0.,0.)); +#2024 = VECTOR('',#2025,1.); +#2025 = DIRECTION('',(0.,1.)); +#2026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2027 = ADVANCED_FACE('',(#2028),#516,.T.); +#2028 = FACE_BOUND('',#2029,.T.); +#2029 = EDGE_LOOP('',(#2030,#2031,#2032,#2033)); +#2030 = ORIENTED_EDGE('',*,*,#1814,.T.); +#2031 = ORIENTED_EDGE('',*,*,#1899,.T.); +#2032 = ORIENTED_EDGE('',*,*,#499,.F.); +#2033 = ORIENTED_EDGE('',*,*,#2007,.F.); +#2034 = ADVANCED_FACE('',(#2035),#596,.F.); +#2035 = FACE_BOUND('',#2036,.F.); +#2036 = EDGE_LOOP('',(#2037,#2060,#2061,#2062)); +#2037 = ORIENTED_EDGE('',*,*,#2038,.T.); +#2038 = EDGE_CURVE('',#2039,#580,#2041,.T.); +#2039 = VERTEX_POINT('',#2040); +#2040 = CARTESIAN_POINT('',(5.0593,113.6862,-31.4851)); +#2041 = SEAM_CURVE('',#2042,(#2046,#2053),.PCURVE_S1.); +#2042 = LINE('',#2043,#2044); +#2043 = CARTESIAN_POINT('',(2.0093,113.6862,-31.4851)); +#2044 = VECTOR('',#2045,1.); +#2045 = DIRECTION('',(1.,0.,0.)); +#2046 = PCURVE('',#596,#2047); +#2047 = DEFINITIONAL_REPRESENTATION('',(#2048),#2052); +#2048 = LINE('',#2049,#2050); +#2049 = CARTESIAN_POINT('',(6.28318530718,-0.)); +#2050 = VECTOR('',#2051,1.); +#2051 = DIRECTION('',(0.,1.)); +#2052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2053 = PCURVE('',#596,#2054); +#2054 = DEFINITIONAL_REPRESENTATION('',(#2055),#2059); +#2055 = LINE('',#2056,#2057); +#2056 = CARTESIAN_POINT('',(0.,-0.)); +#2057 = VECTOR('',#2058,1.); +#2058 = DIRECTION('',(0.,1.)); +#2059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2060 = ORIENTED_EDGE('',*,*,#579,.F.); +#2061 = ORIENTED_EDGE('',*,*,#2038,.F.); +#2062 = ORIENTED_EDGE('',*,*,#2063,.T.); +#2063 = EDGE_CURVE('',#2039,#2039,#2064,.T.); +#2064 = SURFACE_CURVE('',#2065,(#2070,#2077),.PCURVE_S1.); +#2065 = CIRCLE('',#2066,2.35); +#2066 = AXIS2_PLACEMENT_3D('',#2067,#2068,#2069); +#2067 = CARTESIAN_POINT('',(5.0593,113.6862,-33.8351)); +#2068 = DIRECTION('',(1.,0.,0.)); +#2069 = DIRECTION('',(-0.,0.,1.)); +#2070 = PCURVE('',#596,#2071); +#2071 = DEFINITIONAL_REPRESENTATION('',(#2072),#2076); +#2072 = LINE('',#2073,#2074); +#2073 = CARTESIAN_POINT('',(0.,3.05)); +#2074 = VECTOR('',#2075,1.); +#2075 = DIRECTION('',(1.,0.)); +#2076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2077 = PCURVE('',#2078,#2083); +#2078 = PLANE('',#2079); +#2079 = AXIS2_PLACEMENT_3D('',#2080,#2081,#2082); +#2080 = CARTESIAN_POINT('',(5.0593,113.6862,-33.8351)); +#2081 = DIRECTION('',(1.,0.,0.)); +#2082 = DIRECTION('',(-0.,0.,1.)); +#2083 = DEFINITIONAL_REPRESENTATION('',(#2084),#2088); +#2084 = CIRCLE('',#2085,2.35); +#2085 = AXIS2_PLACEMENT_2D('',#2086,#2087); +#2086 = CARTESIAN_POINT('',(0.,0.)); +#2087 = DIRECTION('',(1.,0.)); +#2088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2089 = ADVANCED_FACE('',(#2090),#629,.F.); +#2090 = FACE_BOUND('',#2091,.T.); +#2091 = EDGE_LOOP('',(#2092,#2093,#2094,#2117)); +#2092 = ORIENTED_EDGE('',*,*,#611,.F.); +#2093 = ORIENTED_EDGE('',*,*,#936,.F.); +#2094 = ORIENTED_EDGE('',*,*,#2095,.F.); +#2095 = EDGE_CURVE('',#2096,#908,#2098,.T.); +#2096 = VERTEX_POINT('',#2097); +#2097 = CARTESIAN_POINT('',(-0.240592800216,99.436215507268, + -40.33509053063)); +#2098 = SURFACE_CURVE('',#2099,(#2103,#2110),.PCURVE_S1.); +#2099 = LINE('',#2100,#2101); +#2100 = CARTESIAN_POINT('',(-6.34050880018,99.436215507268, + -40.33509053063)); +#2101 = VECTOR('',#2102,1.); +#2102 = DIRECTION('',(1.,5.844283390569E-15,1.152780867537E-15)); +#2103 = PCURVE('',#629,#2104); +#2104 = DEFINITIONAL_REPRESENTATION('',(#2105),#2109); +#2105 = LINE('',#2106,#2107); +#2106 = CARTESIAN_POINT('',(6.5,6.949860409393E-11)); +#2107 = VECTOR('',#2108,1.); +#2108 = DIRECTION('',(-4.608091581926E-11,1.)); +#2109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2110 = PCURVE('',#924,#2111); +#2111 = DEFINITIONAL_REPRESENTATION('',(#2112),#2116); +#2112 = LINE('',#2113,#2114); +#2113 = CARTESIAN_POINT('',(7.068583470577,-5.329070518201E-15)); +#2114 = VECTOR('',#2115,1.); +#2115 = DIRECTION('',(-3.552753610978E-16,1.)); +#2116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2117 = ORIENTED_EDGE('',*,*,#2118,.F.); +#2118 = EDGE_CURVE('',#614,#2096,#2119,.T.); +#2119 = SURFACE_CURVE('',#2120,(#2124,#2131),.PCURVE_S1.); +#2120 = LINE('',#2121,#2122); +#2121 = CARTESIAN_POINT('',(-0.240592800216,103.45381199209, + -40.33509053063)); +#2122 = VECTOR('',#2123,1.); +#2123 = DIRECTION('',(6.28663787695E-15,-1.,1.206206175281E-14)); +#2124 = PCURVE('',#629,#2125); +#2125 = DEFINITIONAL_REPRESENTATION('',(#2126),#2130); +#2126 = LINE('',#2127,#2128); +#2127 = CARTESIAN_POINT('',(2.482403514889,6.099915999848)); +#2128 = VECTOR('',#2129,1.); +#2129 = DIRECTION('',(1.,4.608135817375E-11)); +#2130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2131 = PCURVE('',#658,#2132); +#2132 = DEFINITIONAL_REPRESENTATION('',(#2133),#2137); +#2133 = LINE('',#2134,#2135); +#2134 = CARTESIAN_POINT('',(-14.74982408356,2.482403515169)); +#2135 = VECTOR('',#2136,1.); +#2136 = DIRECTION('',(3.552713678806E-14,-1.)); +#2137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2138 = ADVANCED_FACE('',(#2139),#658,.T.); +#2139 = FACE_BOUND('',#2140,.T.); +#2140 = EDGE_LOOP('',(#2141,#2142,#2143,#2171,#2199,#2227,#2250,#2273, + #2296,#2317)); +#2141 = ORIENTED_EDGE('',*,*,#641,.F.); +#2142 = ORIENTED_EDGE('',*,*,#2118,.T.); +#2143 = ORIENTED_EDGE('',*,*,#2144,.F.); +#2144 = EDGE_CURVE('',#2145,#2096,#2147,.T.); +#2145 = VERTEX_POINT('',#2146); +#2146 = CARTESIAN_POINT('',(-0.240592800216,94.436215507268, + -35.33509053063)); +#2147 = SURFACE_CURVE('',#2148,(#2153,#2164),.PCURVE_S1.); +#2148 = CIRCLE('',#2149,5.); +#2149 = AXIS2_PLACEMENT_3D('',#2150,#2151,#2152); +#2150 = CARTESIAN_POINT('',(-0.240592800216,99.436215507268, + -35.33509053063)); +#2151 = DIRECTION('',(1.,6.28663787695E-15,-1.069399905187E-15)); +#2152 = DIRECTION('',(3.689144348897E-15,-0.707106781187,-0.707106781187 + )); +#2153 = PCURVE('',#658,#2154); +#2154 = DEFINITIONAL_REPRESENTATION('',(#2155),#2163); +#2155 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2156,#2157,#2158,#2159, +#2160,#2161,#2162),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2156 = CARTESIAN_POINT('',(-13.28535798949,-5.070726875594)); +#2157 = CARTESIAN_POINT('',(-19.40908234645,1.052997481364)); +#2158 = CARTESIAN_POINT('',(-11.04391930907,3.294436161784)); +#2159 = CARTESIAN_POINT('',(-2.678756271696,5.535874842204)); +#2160 = CARTESIAN_POINT('',(-4.920194952116,-2.829288195174)); +#2161 = CARTESIAN_POINT('',(-7.161633632536,-11.19445123255)); +#2162 = CARTESIAN_POINT('',(-13.28535798949,-5.070726875594)); +#2163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2164 = PCURVE('',#924,#2165); +#2165 = DEFINITIONAL_REPRESENTATION('',(#2166),#2170); +#2166 = LINE('',#2167,#2168); +#2167 = CARTESIAN_POINT('',(-2.04281036531E-14,6.099915999964)); +#2168 = VECTOR('',#2169,1.); +#2169 = DIRECTION('',(1.,-8.48147915057E-15)); +#2170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2171 = ORIENTED_EDGE('',*,*,#2172,.F.); +#2172 = EDGE_CURVE('',#2173,#2145,#2175,.T.); +#2173 = VERTEX_POINT('',#2174); +#2174 = CARTESIAN_POINT('',(-0.240592800216,94.436215507268, + -34.83526644707)); +#2175 = SURFACE_CURVE('',#2176,(#2180,#2187),.PCURVE_S1.); +#2176 = LINE('',#2177,#2178); +#2177 = CARTESIAN_POINT('',(-0.240592800216,94.436215507268, + -32.96017848885)); +#2178 = VECTOR('',#2179,1.); +#2179 = DIRECTION('',(-1.069399905188E-15,1.007888433386E-13,-1.)); +#2180 = PCURVE('',#658,#2181); +#2181 = DEFINITIONAL_REPRESENTATION('',(#2182),#2186); +#2182 = LINE('',#2183,#2184); +#2183 = CARTESIAN_POINT('',(-7.37491204178,-6.535192969662)); +#2184 = VECTOR('',#2185,1.); +#2185 = DIRECTION('',(-1.,7.73237683033E-14)); +#2186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2187 = PCURVE('',#2188,#2193); +#2188 = PLANE('',#2189); +#2189 = AXIS2_PLACEMENT_3D('',#2190,#2191,#2192); +#2190 = CARTESIAN_POINT('',(-6.34050880041,94.436215507268, + -40.33509053063)); +#2191 = DIRECTION('',(5.844283390569E-15,-1.,-2.346507503525E-14)); +#2192 = DIRECTION('',(-1.152780867537E-15,-2.346507503525E-14,1.)); +#2193 = DEFINITIONAL_REPRESENTATION('',(#2194),#2198); +#2194 = LINE('',#2195,#2196); +#2195 = CARTESIAN_POINT('',(7.37491204178,-6.099916000194)); +#2196 = VECTOR('',#2197,1.); +#2197 = DIRECTION('',(-1.,2.222180772724E-15)); +#2198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2199 = ORIENTED_EDGE('',*,*,#2200,.T.); +#2200 = EDGE_CURVE('',#2173,#2201,#2203,.T.); +#2201 = VERTEX_POINT('',#2202); +#2202 = CARTESIAN_POINT('',(-0.240592800216,98.936215507268, + -34.83526644707)); +#2203 = SURFACE_CURVE('',#2204,(#2208,#2215),.PCURVE_S1.); +#2204 = LINE('',#2205,#2206); +#2205 = CARTESIAN_POINT('',(-0.240592800216,106.9014241458, + -34.83526644707)); +#2206 = VECTOR('',#2207,1.); +#2207 = DIRECTION('',(-6.28663787695E-15,1.,-5.9135856969E-14)); +#2208 = PCURVE('',#658,#2209); +#2209 = DEFINITIONAL_REPRESENTATION('',(#2210),#2214); +#2210 = LINE('',#2211,#2212); +#2211 = CARTESIAN_POINT('',(-9.250000000002,5.930015668871)); +#2212 = VECTOR('',#2213,1.); +#2213 = DIRECTION('',(-8.260093200425E-14,1.)); +#2214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2215 = PCURVE('',#2216,#2221); +#2216 = PLANE('',#2217); +#2217 = AXIS2_PLACEMENT_3D('',#2218,#2219,#2220); +#2218 = CARTESIAN_POINT('',(-4.440508800217,112.83143981467, + -34.83526644707)); +#2219 = DIRECTION('',(1.47053451828E-14,5.9135856969E-14,1.)); +#2220 = DIRECTION('',(-5.641721951872E-11,-1.,5.913585696983E-14)); +#2221 = DEFINITIONAL_REPRESENTATION('',(#2222),#2226); +#2222 = LINE('',#2223,#2224); +#2223 = CARTESIAN_POINT('',(5.930015668634,4.199916000335)); +#2224 = VECTOR('',#2225,1.); +#2225 = DIRECTION('',(-1.,-5.64235061566E-11)); +#2226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2227 = ORIENTED_EDGE('',*,*,#2228,.T.); +#2228 = EDGE_CURVE('',#2201,#2229,#2231,.T.); +#2229 = VERTEX_POINT('',#2230); +#2230 = CARTESIAN_POINT('',(-0.240592800216,98.936215507268, + -37.33509053063)); +#2231 = SURFACE_CURVE('',#2232,(#2236,#2243),.PCURVE_S1.); +#2232 = LINE('',#2233,#2234); +#2233 = CARTESIAN_POINT('',(-0.240592800216,98.936215507268, + -33.99667848885)); +#2234 = VECTOR('',#2235,1.); +#2235 = DIRECTION('',(-1.069399905187E-15,2.344686043875E-14,-1.)); +#2236 = PCURVE('',#658,#2237); +#2237 = DEFINITIONAL_REPRESENTATION('',(#2238),#2242); +#2238 = LINE('',#2239,#2240); +#2239 = CARTESIAN_POINT('',(-8.411412041781,-2.035192969661)); +#2240 = VECTOR('',#2241,1.); +#2241 = DIRECTION('',(-1.,-1.821459649779E-17)); +#2242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2243 = PCURVE('',#1042,#2244); +#2244 = DEFINITIONAL_REPRESENTATION('',(#2245),#2249); +#2245 = LINE('',#2246,#2247); +#2246 = CARTESIAN_POINT('',(-8.411412041781,-7.199916000078)); +#2247 = VECTOR('',#2248,1.); +#2248 = DIRECTION('',(1.,4.072111965162E-15)); +#2249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2250 = ORIENTED_EDGE('',*,*,#2251,.T.); +#2251 = EDGE_CURVE('',#2229,#2252,#2254,.T.); +#2252 = VERTEX_POINT('',#2253); +#2253 = CARTESIAN_POINT('',(-0.240592800216,102.93621550726, + -37.33509053063)); +#2254 = SURFACE_CURVE('',#2255,(#2259,#2266),.PCURVE_S1.); +#2255 = LINE('',#2256,#2257); +#2256 = CARTESIAN_POINT('',(-0.240592800216,97.203811992098, + -37.33509053063)); +#2257 = VECTOR('',#2258,1.); +#2258 = DIRECTION('',(-6.28663787695E-15,1.,2.344686043875E-14)); +#2259 = PCURVE('',#658,#2260); +#2260 = DEFINITIONAL_REPRESENTATION('',(#2261),#2265); +#2261 = LINE('',#2262,#2263); +#2262 = CARTESIAN_POINT('',(-11.74982408356,-3.767596484831)); +#2263 = VECTOR('',#2264,1.); +#2264 = DIRECTION('',(-1.82145964978E-17,1.)); +#2265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2266 = PCURVE('',#1014,#2267); +#2267 = DEFINITIONAL_REPRESENTATION('',(#2268),#2272); +#2268 = LINE('',#2269,#2270); +#2269 = CARTESIAN_POINT('',(3.76759648483,-7.199916000078)); +#2270 = VECTOR('',#2271,1.); +#2271 = DIRECTION('',(1.,-2.949029908533E-17)); +#2272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2273 = ORIENTED_EDGE('',*,*,#2274,.T.); +#2274 = EDGE_CURVE('',#2252,#2275,#2277,.T.); +#2275 = VERTEX_POINT('',#2276); +#2276 = CARTESIAN_POINT('',(-0.240592800216,102.93621550726, + -34.83526644707)); +#2277 = SURFACE_CURVE('',#2278,(#2282,#2289),.PCURVE_S1.); +#2278 = LINE('',#2279,#2280); +#2279 = CARTESIAN_POINT('',(-0.240592800216,102.93621550726, + -36.49667848885)); +#2280 = VECTOR('',#2281,1.); +#2281 = DIRECTION('',(1.069399905187E-15,-2.344686043875E-14,1.)); +#2282 = PCURVE('',#658,#2283); +#2283 = DEFINITIONAL_REPRESENTATION('',(#2284),#2288); +#2284 = LINE('',#2285,#2286); +#2285 = CARTESIAN_POINT('',(-10.91141204178,1.96480703034)); +#2286 = VECTOR('',#2287,1.); +#2287 = DIRECTION('',(1.,1.821459649779E-17)); +#2288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2289 = PCURVE('',#1096,#2290); +#2290 = DEFINITIONAL_REPRESENTATION('',(#2291),#2295); +#2291 = LINE('',#2292,#2293); +#2292 = CARTESIAN_POINT('',(10.911412041781,-7.199915999922)); +#2293 = VECTOR('',#2294,1.); +#2294 = DIRECTION('',(1.,-4.072111965162E-15)); +#2295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2296 = ORIENTED_EDGE('',*,*,#2297,.T.); +#2297 = EDGE_CURVE('',#2275,#1614,#2298,.T.); +#2298 = SURFACE_CURVE('',#2299,(#2303,#2310),.PCURVE_S1.); +#2299 = LINE('',#2300,#2301); +#2300 = CARTESIAN_POINT('',(-0.240592800216,106.9014241458, + -34.83526644707)); +#2301 = VECTOR('',#2302,1.); +#2302 = DIRECTION('',(-6.28663787695E-15,1.,-5.9135856969E-14)); +#2303 = PCURVE('',#658,#2304); +#2304 = DEFINITIONAL_REPRESENTATION('',(#2305),#2309); +#2305 = LINE('',#2306,#2307); +#2306 = CARTESIAN_POINT('',(-9.250000000002,5.930015668871)); +#2307 = VECTOR('',#2308,1.); +#2308 = DIRECTION('',(-8.260093200425E-14,1.)); +#2309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2310 = PCURVE('',#1652,#2311); +#2311 = DEFINITIONAL_REPRESENTATION('',(#2312),#2316); +#2312 = LINE('',#2313,#2314); +#2313 = CARTESIAN_POINT('',(5.930015668634,4.199916000335)); +#2314 = VECTOR('',#2315,1.); +#2315 = DIRECTION('',(-1.,-5.64235061566E-11)); +#2316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2317 = ORIENTED_EDGE('',*,*,#1613,.F.); +#2318 = ADVANCED_FACE('',(#2319),#811,.T.); +#2319 = FACE_BOUND('',#2320,.T.); +#2320 = EDGE_LOOP('',(#2321,#2351,#2372,#2373,#2374,#2375,#2403,#2431)); +#2321 = ORIENTED_EDGE('',*,*,#2322,.T.); +#2322 = EDGE_CURVE('',#2323,#2325,#2327,.T.); +#2323 = VERTEX_POINT('',#2324); +#2324 = CARTESIAN_POINT('',(-0.240592800217,95.12119603255, + -7.735266447075)); +#2325 = VERTEX_POINT('',#2326); +#2326 = CARTESIAN_POINT('',(-0.240592800217,89.436215476923, + -7.735266447075)); +#2327 = SURFACE_CURVE('',#2328,(#2332,#2339),.PCURVE_S1.); +#2328 = LINE('',#2329,#2330); +#2329 = CARTESIAN_POINT('',(-0.240592800217,109.76462092233, + -7.735266447075)); +#2330 = VECTOR('',#2331,1.); +#2331 = DIRECTION('',(6.854356131576E-15,-1.,-3.602940798566E-17)); +#2332 = PCURVE('',#811,#2333); +#2333 = DEFINITIONAL_REPRESENTATION('',(#2334),#2338); +#2334 = LINE('',#2335,#2336); +#2335 = CARTESIAN_POINT('',(8.828405445414,3.049957850816)); +#2336 = VECTOR('',#2337,1.); +#2337 = DIRECTION('',(-1.,-1.010072741008E-15)); +#2338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2339 = PCURVE('',#2340,#2345); +#2340 = PLANE('',#2341); +#2341 = AXIS2_PLACEMENT_3D('',#2342,#2343,#2344); +#2342 = CARTESIAN_POINT('',(-0.240592800216,100.97140847692, + -25.58526644707)); +#2343 = DIRECTION('',(-1.,-6.28663787695E-15,1.069399905187E-15)); +#2344 = DIRECTION('',(1.069399905187E-15,-2.346507503525E-14,1.)); +#2345 = DEFINITIONAL_REPRESENTATION('',(#2346),#2350); +#2346 = LINE('',#2347,#2348); +#2347 = CARTESIAN_POINT('',(17.85,8.793212445408)); +#2348 = VECTOR('',#2349,1.); +#2349 = DIRECTION('',(2.342904562726E-14,-1.)); +#2350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2351 = ORIENTED_EDGE('',*,*,#2352,.T.); +#2352 = EDGE_CURVE('',#2325,#796,#2353,.T.); +#2353 = SURFACE_CURVE('',#2354,(#2358,#2365),.PCURVE_S1.); +#2354 = LINE('',#2355,#2356); +#2355 = CARTESIAN_POINT('',(-0.240592800217,89.436215476923, + -7.735266447075)); +#2356 = VECTOR('',#2357,1.); +#2357 = DIRECTION('',(1.,4.206226782843E-15,6.906312355993E-17)); +#2358 = PCURVE('',#811,#2359); +#2359 = DEFINITIONAL_REPRESENTATION('',(#2360),#2364); +#2360 = LINE('',#2361,#2362); +#2361 = CARTESIAN_POINT('',(-11.5,3.049957850816)); +#2362 = VECTOR('',#2363,1.); +#2363 = DIRECTION('',(-1.638056607725E-15,-1.)); +#2364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2365 = PCURVE('',#839,#2366); +#2366 = DEFINITIONAL_REPRESENTATION('',(#2367),#2371); +#2367 = LINE('',#2368,#2369); +#2368 = CARTESIAN_POINT('',(32.277000000001,-7.199915999999)); +#2369 = VECTOR('',#2370,1.); +#2370 = DIRECTION('',(-1.194740046442E-15,-1.)); +#2371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2372 = ORIENTED_EDGE('',*,*,#795,.F.); +#2373 = ORIENTED_EDGE('',*,*,#1249,.F.); +#2374 = ORIENTED_EDGE('',*,*,#1466,.T.); +#2375 = ORIENTED_EDGE('',*,*,#2376,.T.); +#2376 = EDGE_CURVE('',#1439,#2377,#2379,.T.); +#2377 = VERTEX_POINT('',#2378); +#2378 = CARTESIAN_POINT('',(-0.240592800217,103.8216209265, + -7.735266447075)); +#2379 = SURFACE_CURVE('',#2380,(#2385,#2396),.PCURVE_S1.); +#2380 = CIRCLE('',#2381,1.5); +#2381 = AXIS2_PLACEMENT_3D('',#2382,#2383,#2384); +#2382 = CARTESIAN_POINT('',(-0.240504400127,105.3216209239, + -7.735266447075)); +#2383 = DIRECTION('',(6.906312355993E-17,3.602940798567E-17,-1.)); +#2384 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798567E-17)); +#2385 = PCURVE('',#811,#2386); +#2386 = DEFINITIONAL_REPRESENTATION('',(#2387),#2395); +#2387 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2388,#2389,#2390,#2391, +#2392,#2393,#2394),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2388 = CARTESIAN_POINT('',(5.885405446977,3.049869450726)); +#2389 = CARTESIAN_POINT('',(5.885405446977,0.451793239373)); +#2390 = CARTESIAN_POINT('',(3.635405446977,1.750831345049)); +#2391 = CARTESIAN_POINT('',(1.385405446977,3.049869450726)); +#2392 = CARTESIAN_POINT('',(3.635405446977,4.348907556403)); +#2393 = CARTESIAN_POINT('',(5.885405446977,5.647945662079)); +#2394 = CARTESIAN_POINT('',(5.885405446977,3.049869450726)); +#2395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2396 = PCURVE('',#1454,#2397); +#2397 = DEFINITIONAL_REPRESENTATION('',(#2398),#2402); +#2398 = LINE('',#2399,#2400); +#2399 = CARTESIAN_POINT('',(7.853981633974,3.1)); +#2400 = VECTOR('',#2401,1.); +#2401 = DIRECTION('',(-1.,0.)); +#2402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2403 = ORIENTED_EDGE('',*,*,#2404,.T.); +#2404 = EDGE_CURVE('',#2377,#2405,#2407,.T.); +#2405 = VERTEX_POINT('',#2406); +#2406 = CARTESIAN_POINT('',(-0.240592800217,98.121196027341, + -7.735266447075)); +#2407 = SURFACE_CURVE('',#2408,(#2412,#2419),.PCURVE_S1.); +#2408 = LINE('',#2409,#2410); +#2409 = CARTESIAN_POINT('',(-0.240592800217,109.76462092233, + -7.735266447075)); +#2410 = VECTOR('',#2411,1.); +#2411 = DIRECTION('',(6.854356131576E-15,-1.,-3.602940798566E-17)); +#2412 = PCURVE('',#811,#2413); +#2413 = DEFINITIONAL_REPRESENTATION('',(#2414),#2418); +#2414 = LINE('',#2415,#2416); +#2415 = CARTESIAN_POINT('',(8.828405445414,3.049957850816)); +#2416 = VECTOR('',#2417,1.); +#2417 = DIRECTION('',(-1.,-1.010072741008E-15)); +#2418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2419 = PCURVE('',#2420,#2425); +#2420 = PLANE('',#2421); +#2421 = AXIS2_PLACEMENT_3D('',#2422,#2423,#2424); +#2422 = CARTESIAN_POINT('',(-0.240592800216,100.97140847692, + -25.58526644707)); +#2423 = DIRECTION('',(-1.,-6.28663787695E-15,1.069399905187E-15)); +#2424 = DIRECTION('',(1.069399905187E-15,-2.346507503525E-14,1.)); +#2425 = DEFINITIONAL_REPRESENTATION('',(#2426),#2430); +#2426 = LINE('',#2427,#2428); +#2427 = CARTESIAN_POINT('',(17.85,8.793212445408)); +#2428 = VECTOR('',#2429,1.); +#2429 = DIRECTION('',(2.342904562726E-14,-1.)); +#2430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2431 = ORIENTED_EDGE('',*,*,#2432,.T.); +#2432 = EDGE_CURVE('',#2405,#2323,#2433,.T.); +#2433 = SURFACE_CURVE('',#2434,(#2439,#2450),.PCURVE_S1.); +#2434 = CIRCLE('',#2435,1.5); +#2435 = AXIS2_PLACEMENT_3D('',#2436,#2437,#2438); +#2436 = CARTESIAN_POINT('',(-0.240504400127,96.621196029946, + -7.735266447075)); +#2437 = DIRECTION('',(6.906312355993E-17,3.602940798567E-17,-1.)); +#2438 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798567E-17)); +#2439 = PCURVE('',#811,#2440); +#2440 = DEFINITIONAL_REPRESENTATION('',(#2441),#2449); +#2441 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2442,#2443,#2444,#2445, +#2446,#2447,#2448),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2442 = CARTESIAN_POINT('',(-2.815019446977,3.049869450726)); +#2443 = CARTESIAN_POINT('',(-2.815019446977,0.451793239373)); +#2444 = CARTESIAN_POINT('',(-5.065019446977,1.750831345049)); +#2445 = CARTESIAN_POINT('',(-7.315019446977,3.049869450726)); +#2446 = CARTESIAN_POINT('',(-5.065019446977,4.348907556403)); +#2447 = CARTESIAN_POINT('',(-2.815019446977,5.647945662079)); +#2448 = CARTESIAN_POINT('',(-2.815019446977,3.049869450726)); +#2449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2450 = PCURVE('',#2451,#2456); +#2451 = CYLINDRICAL_SURFACE('',#2452,1.5); +#2452 = AXIS2_PLACEMENT_3D('',#2453,#2454,#2455); +#2453 = CARTESIAN_POINT('',(-0.240504400127,96.621196029946, + -10.83526644707)); +#2454 = DIRECTION('',(-6.938893903907E-17,-1.262177448354E-29,1.)); +#2455 = DIRECTION('',(1.,5.660586370697E-15,6.938893903907E-17)); +#2456 = DEFINITIONAL_REPRESENTATION('',(#2457),#2461); +#2457 = LINE('',#2458,#2459); +#2458 = CARTESIAN_POINT('',(7.853981633974,3.1)); +#2459 = VECTOR('',#2460,1.); +#2460 = DIRECTION('',(-1.,0.)); +#2461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2462 = ADVANCED_FACE('',(#2463),#839,.T.); +#2463 = FACE_BOUND('',#2464,.T.); +#2464 = EDGE_LOOP('',(#2465,#2488,#2489,#2490)); +#2465 = ORIENTED_EDGE('',*,*,#2466,.F.); +#2466 = EDGE_CURVE('',#824,#2467,#2469,.T.); +#2467 = VERTEX_POINT('',#2468); +#2468 = CARTESIAN_POINT('',(-0.240592800216,89.436215476929, + -22.83509053063)); +#2469 = SURFACE_CURVE('',#2470,(#2474,#2481),.PCURVE_S1.); +#2470 = LINE('',#2471,#2472); +#2471 = CARTESIAN_POINT('',(-6.890508800255,89.436215476929, + -22.83509053063)); +#2472 = VECTOR('',#2473,1.); +#2473 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#2474 = PCURVE('',#839,#2475); +#2475 = DEFINITIONAL_REPRESENTATION('',(#2476),#2480); +#2476 = LINE('',#2477,#2478); +#2477 = CARTESIAN_POINT('',(17.177175916439,-0.549999999961)); +#2478 = VECTOR('',#2479,1.); +#2479 = DIRECTION('',(1.110223024646E-16,1.)); +#2480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2481 = PCURVE('',#867,#2482); +#2482 = DEFINITIONAL_REPRESENTATION('',(#2483),#2487); +#2483 = LINE('',#2484,#2485); +#2484 = CARTESIAN_POINT('',(-2.726262326197E-14,-3.535533905933)); +#2485 = VECTOR('',#2486,1.); +#2486 = DIRECTION('',(1.,-8.265064833294E-15)); +#2487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2488 = ORIENTED_EDGE('',*,*,#823,.F.); +#2489 = ORIENTED_EDGE('',*,*,#2352,.F.); +#2490 = ORIENTED_EDGE('',*,*,#2491,.F.); +#2491 = EDGE_CURVE('',#2467,#2325,#2492,.T.); +#2492 = SURFACE_CURVE('',#2493,(#2497,#2504),.PCURVE_S1.); +#2493 = LINE('',#2494,#2495); +#2494 = CARTESIAN_POINT('',(-0.240592800217,89.436215476923, + -10.83526644707)); +#2495 = VECTOR('',#2496,1.); +#2496 = DIRECTION('',(-6.938893903907E-17,0.,1.)); +#2497 = PCURVE('',#839,#2498); +#2498 = DEFINITIONAL_REPRESENTATION('',(#2499),#2503); +#2499 = LINE('',#2500,#2501); +#2500 = CARTESIAN_POINT('',(29.177,-7.199915999999)); +#2501 = VECTOR('',#2502,1.); +#2502 = DIRECTION('',(1.,-1.194414230963E-15)); +#2503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2504 = PCURVE('',#2340,#2505); +#2505 = DEFINITIONAL_REPRESENTATION('',(#2506),#2510); +#2506 = LINE('',#2507,#2508); +#2507 = CARTESIAN_POINT('',(14.750000000001,-11.535193)); +#2508 = VECTOR('',#2509,1.); +#2509 = DIRECTION('',(1.,2.346507503525E-14)); +#2510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2511 = ADVANCED_FACE('',(#2512),#867,.T.); +#2512 = FACE_BOUND('',#2513,.T.); +#2513 = EDGE_LOOP('',(#2514,#2515,#2516,#2539,#2594,#2622,#2645,#2672, + #2699,#2726)); +#2514 = ORIENTED_EDGE('',*,*,#851,.T.); +#2515 = ORIENTED_EDGE('',*,*,#2466,.T.); +#2516 = ORIENTED_EDGE('',*,*,#2517,.T.); +#2517 = EDGE_CURVE('',#2467,#2518,#2520,.T.); +#2518 = VERTEX_POINT('',#2519); +#2519 = CARTESIAN_POINT('',(-0.240592800216,92.466453031719, + -25.86532808542)); +#2520 = SURFACE_CURVE('',#2521,(#2525,#2532),.PCURVE_S1.); +#2521 = LINE('',#2522,#2523); +#2522 = CARTESIAN_POINT('',(-0.240592800216,94.257557706039, + -27.65643275974)); +#2523 = VECTOR('',#2524,1.); +#2524 = DIRECTION('',(-5.201504198413E-15,0.707106781187,-0.707106781187 + )); +#2525 = PCURVE('',#867,#2526); +#2526 = DEFINITIONAL_REPRESENTATION('',(#2527),#2531); +#2527 = LINE('',#2528,#2529); +#2528 = CARTESIAN_POINT('',(-6.649916000038,3.282873663316)); +#2529 = VECTOR('',#2530,1.); +#2530 = DIRECTION('',(1.014917578372E-14,1.)); +#2531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2532 = PCURVE('',#2340,#2533); +#2533 = DEFINITIONAL_REPRESENTATION('',(#2534),#2538); +#2534 = LINE('',#2535,#2536); +#2535 = CARTESIAN_POINT('',(-2.071166312671,-6.71385077089)); +#2536 = VECTOR('',#2537,1.); +#2537 = DIRECTION('',(-0.707106781187,0.707106781187)); +#2538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2539 = ORIENTED_EDGE('',*,*,#2540,.T.); +#2540 = EDGE_CURVE('',#2518,#2541,#2543,.T.); +#2541 = VERTEX_POINT('',#2542); +#2542 = CARTESIAN_POINT('',(1.957961544574,94.436215476929, + -27.83509053063)); +#2543 = SURFACE_CURVE('',#2544,(#2549,#2560),.PCURVE_S1.); +#2544 = ELLIPSE('',#2545,3.127876947084,2.211743); +#2545 = AXIS2_PLACEMENT_3D('',#2546,#2547,#2548); +#2546 = CARTESIAN_POINT('',(-0.240504400126,94.678196029952, + -28.07707108366)); +#2547 = DIRECTION('',(-4.947671585305E-15,0.707106781187,0.707106781187) + ); +#2548 = DIRECTION('',(-4.102439477331E-15,0.707106781187,-0.707106781187 + )); +#2549 = PCURVE('',#867,#2550); +#2550 = DEFINITIONAL_REPRESENTATION('',(#2551),#2559); +#2551 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2552,#2553,#2554,#2555, +#2556,#2557,#2558),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2552 = CARTESIAN_POINT('',(-6.650004400129,7.005623032932)); +#2553 = CARTESIAN_POINT('',(-2.819153150844,7.005623032932)); +#2554 = CARTESIAN_POINT('',(-4.734578775486,2.313807612306)); +#2555 = CARTESIAN_POINT('',(-6.650004400129,-2.378007808319)); +#2556 = CARTESIAN_POINT('',(-8.565430024771,2.313807612306)); +#2557 = CARTESIAN_POINT('',(-10.48085564941,7.005623032932)); +#2558 = CARTESIAN_POINT('',(-6.650004400129,7.005623032932)); +#2559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2560 = PCURVE('',#2561,#2566); +#2561 = CYLINDRICAL_SURFACE('',#2562,2.211743); +#2562 = AXIS2_PLACEMENT_3D('',#2563,#2564,#2565); +#2563 = CARTESIAN_POINT('',(-0.240504400126,94.678196029952, + -10.83526644707)); +#2564 = DIRECTION('',(4.255784291194E-17,-9.59831506504E-16,-1.)); +#2565 = DIRECTION('',(0.669727148649,-0.74260726253,7.412799903208E-16) + ); +#2566 = DEFINITIONAL_REPRESENTATION('',(#2567),#2593); +#2567 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2568,#2569,#2570,#2571,#2572, + #2573,#2574,#2575,#2576,#2577,#2578,#2579,#2580,#2581,#2582,#2583, + #2584,#2585,#2586,#2587,#2588,#2589,#2590,#2591,#2592), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (3.141552685072,3.207971306451,3.27438992783,3.34080854921, + 3.407227170589,3.473645791968,3.540064413347,3.606483034727, + 3.672901656106,3.739320277485,3.805738898865,3.872157520244, + 3.938576141623,4.004994763003,4.071413384382,4.137832005761, + 4.204250627141,4.27066924852,4.337087869899,4.403506491279, + 4.469925112658,4.536343734037,4.602762355416), + .QUASI_UNIFORM_KNOTS.); +#2568 = CARTESIAN_POINT('',(0.73388127158,15.030061638352)); +#2569 = CARTESIAN_POINT('',(0.71174173112,15.030056107529)); +#2570 = CARTESIAN_POINT('',(0.6674626502,15.033310940164)); +#2571 = CARTESIAN_POINT('',(0.601044028821,15.047922286621)); +#2572 = CARTESIAN_POINT('',(0.534625407442,15.072210905787)); +#2573 = CARTESIAN_POINT('',(0.468206786062,15.106066310988)); +#2574 = CARTESIAN_POINT('',(0.401788164683,15.149340111509)); +#2575 = CARTESIAN_POINT('',(0.335369543304,15.201841235474)); +#2576 = CARTESIAN_POINT('',(0.268950921924,15.263338227803)); +#2577 = CARTESIAN_POINT('',(0.202532300545,15.333559880918)); +#2578 = CARTESIAN_POINT('',(0.136113679166,15.412196535214)); +#2579 = CARTESIAN_POINT('',(6.969505778655E-02,15.498901416597)); +#2580 = CARTESIAN_POINT('',(3.276436407231E-03,15.593292173194)); +#2581 = CARTESIAN_POINT('',(-6.314218497208E-02,15.694952559443)); +#2582 = CARTESIAN_POINT('',(-0.129560806351,15.803434272215)); +#2583 = CARTESIAN_POINT('',(-0.195979427731,15.918258927506)); +#2584 = CARTESIAN_POINT('',(-0.26239804911,16.038920170439)); +#2585 = CARTESIAN_POINT('',(-0.328816670489,16.164885906755)); +#2586 = CARTESIAN_POINT('',(-0.395235291869,16.295600654581)); +#2587 = CARTESIAN_POINT('',(-0.461653913248,16.430487974116)); +#2588 = CARTESIAN_POINT('',(-0.528072534627,16.568953083822)); +#2589 = CARTESIAN_POINT('',(-0.594491156007,16.710385206385)); +#2590 = CARTESIAN_POINT('',(-0.660909777386,16.854161295583)); +#2591 = CARTESIAN_POINT('',(-0.705188858305,16.951150383128)); +#2592 = CARTESIAN_POINT('',(-0.727328398765,16.999824083562)); +#2593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2594 = ORIENTED_EDGE('',*,*,#2595,.T.); +#2595 = EDGE_CURVE('',#2541,#2596,#2598,.T.); +#2596 = VERTEX_POINT('',#2597); +#2597 = CARTESIAN_POINT('',(1.959499999964,94.436215507267, + -27.83509053063)); +#2598 = SURFACE_CURVE('',#2599,(#2603,#2610),.PCURVE_S1.); +#2599 = LINE('',#2600,#2601); +#2600 = CARTESIAN_POINT('',(-6.890508800255,94.436215476929, + -27.83509053063)); +#2601 = VECTOR('',#2602,1.); +#2602 = DIRECTION('',(1.,5.844283390569E-15,1.152780867537E-15)); +#2603 = PCURVE('',#867,#2604); +#2604 = DEFINITIONAL_REPRESENTATION('',(#2605),#2609); +#2605 = LINE('',#2606,#2607); +#2606 = CARTESIAN_POINT('',(2.726262326197E-14,3.535533905933)); +#2607 = VECTOR('',#2608,1.); +#2608 = DIRECTION('',(-1.,8.265064833294E-15)); +#2609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2610 = PCURVE('',#2611,#2616); +#2611 = PLANE('',#2612); +#2612 = AXIS2_PLACEMENT_3D('',#2613,#2614,#2615); +#2613 = CARTESIAN_POINT('',(-6.340508800294,95.936215507268, + -27.83509053063)); +#2614 = DIRECTION('',(-1.152780867537E-15,-5.392371681819E-15,1.)); +#2615 = DIRECTION('',(-5.051514762029E-15,-1.,-5.392371681819E-15)); +#2616 = DEFINITIONAL_REPRESENTATION('',(#2617),#2621); +#2617 = LINE('',#2618,#2619); +#2618 = CARTESIAN_POINT('',(1.500000030338,-0.549999999961)); +#2619 = VECTOR('',#2620,1.); +#2620 = DIRECTION('',(-1.08957981526E-14,1.)); +#2621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2622 = ORIENTED_EDGE('',*,*,#2623,.F.); +#2623 = EDGE_CURVE('',#2624,#2596,#2626,.T.); +#2624 = VERTEX_POINT('',#2625); +#2625 = CARTESIAN_POINT('',(2.2593,94.436215507268,-27.83509056097)); +#2626 = SURFACE_CURVE('',#2627,(#2631,#2638),.PCURVE_S1.); +#2627 = LINE('',#2628,#2629); +#2628 = CARTESIAN_POINT('',(-6.615508800332,94.436215507268, + -27.83509056097)); +#2629 = VECTOR('',#2630,1.); +#2630 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#2631 = PCURVE('',#867,#2632); +#2632 = DEFINITIONAL_REPRESENTATION('',(#2633),#2637); +#2633 = LINE('',#2634,#2635); +#2634 = CARTESIAN_POINT('',(-0.274999999922,3.535533948838)); +#2635 = VECTOR('',#2636,1.); +#2636 = DIRECTION('',(1.,-8.265064833294E-15)); +#2637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2638 = PCURVE('',#2188,#2639); +#2639 = DEFINITIONAL_REPRESENTATION('',(#2640),#2644); +#2640 = LINE('',#2641,#2642); +#2641 = CARTESIAN_POINT('',(12.499999969661,0.274999999922)); +#2642 = VECTOR('',#2643,1.); +#2643 = DIRECTION('',(1.270066057406E-28,1.)); +#2644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2645 = ORIENTED_EDGE('',*,*,#2646,.T.); +#2646 = EDGE_CURVE('',#2624,#2647,#2649,.T.); +#2647 = VERTEX_POINT('',#2648); +#2648 = CARTESIAN_POINT('',(2.2593,93.936224946292,-27.3351)); +#2649 = SURFACE_CURVE('',#2650,(#2654,#2660),.PCURVE_S1.); +#2650 = LINE('',#2651,#2652); +#2651 = CARTESIAN_POINT('',(2.2593,95.889663975038,-29.28853902874)); +#2652 = VECTOR('',#2653,1.); +#2653 = DIRECTION('',(0.,-0.707106781187,0.707106781187)); +#2654 = PCURVE('',#867,#2655); +#2655 = DEFINITIONAL_REPRESENTATION('',(#2656),#2659); +#2656 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2657,#2658),.UNSPECIFIED.,.F., + .F.,(2,2),(2.055486535331,2.762579967721),.PIECEWISE_BEZIER_KNOTS.); +#2657 = CARTESIAN_POINT('',(-9.149808800255,3.535533948838)); +#2658 = CARTESIAN_POINT('',(-9.149808800255,2.828440516448)); +#2659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2660 = PCURVE('',#2661,#2666); +#2661 = PLANE('',#2662); +#2662 = AXIS2_PLACEMENT_3D('',#2663,#2664,#2665); +#2663 = CARTESIAN_POINT('',(2.2593,92.75,-40.3351)); +#2664 = DIRECTION('',(1.,0.,0.)); +#2665 = DIRECTION('',(0.,0.,1.)); +#2666 = DEFINITIONAL_REPRESENTATION('',(#2667),#2671); +#2667 = LINE('',#2668,#2669); +#2668 = CARTESIAN_POINT('',(11.046560971254,-3.139663975038)); +#2669 = VECTOR('',#2670,1.); +#2670 = DIRECTION('',(0.707106781187,0.707106781187)); +#2671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2672 = ORIENTED_EDGE('',*,*,#2673,.F.); +#2673 = EDGE_CURVE('',#2674,#2647,#2676,.T.); +#2674 = VERTEX_POINT('',#2675); +#2675 = CARTESIAN_POINT('',(7.2593,93.936224946292,-27.3351)); +#2676 = SURFACE_CURVE('',#2677,(#2681,#2687),.PCURVE_S1.); +#2677 = LINE('',#2678,#2679); +#2678 = CARTESIAN_POINT('',(-2.315604400127,93.936224946292,-27.3351)); +#2679 = VECTOR('',#2680,1.); +#2680 = DIRECTION('',(-1.,-6.997064258106E-15,0.)); +#2681 = PCURVE('',#867,#2682); +#2682 = DEFINITIONAL_REPRESENTATION('',(#2683),#2686); +#2683 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2684,#2685),.UNSPECIFIED.,.F., + .F.,(2,2),(-9.574904400127,-4.574904400127),.PIECEWISE_BEZIER_KNOTS.); +#2684 = CARTESIAN_POINT('',(-14.14980880025,2.828440516448)); +#2685 = CARTESIAN_POINT('',(-9.149808800255,2.828440516448)); +#2686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2687 = PCURVE('',#2688,#2693); +#2688 = PLANE('',#2689); +#2689 = AXIS2_PLACEMENT_3D('',#2690,#2691,#2692); +#2690 = CARTESIAN_POINT('',(2.2593,92.75,-27.3351)); +#2691 = DIRECTION('',(0.,0.,1.)); +#2692 = DIRECTION('',(1.,0.,0.)); +#2693 = DEFINITIONAL_REPRESENTATION('',(#2694),#2698); +#2694 = LINE('',#2695,#2696); +#2695 = CARTESIAN_POINT('',(-4.574904400127,1.186224946292)); +#2696 = VECTOR('',#2697,1.); +#2697 = DIRECTION('',(-1.,-6.997064258106E-15)); +#2698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2699 = ORIENTED_EDGE('',*,*,#2700,.F.); +#2700 = EDGE_CURVE('',#2701,#2674,#2703,.T.); +#2701 = VERTEX_POINT('',#2702); +#2702 = CARTESIAN_POINT('',(7.2593,94.436215507268,-27.83509056097)); +#2703 = SURFACE_CURVE('',#2704,(#2708,#2714),.PCURVE_S1.); +#2704 = LINE('',#2705,#2706); +#2705 = CARTESIAN_POINT('',(7.2593,95.889663975038,-29.28853902874)); +#2706 = VECTOR('',#2707,1.); +#2707 = DIRECTION('',(0.,-0.707106781187,0.707106781187)); +#2708 = PCURVE('',#867,#2709); +#2709 = DEFINITIONAL_REPRESENTATION('',(#2710),#2713); +#2710 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2711,#2712),.UNSPECIFIED.,.F., + .F.,(2,2),(2.055486535331,2.762579967721),.PIECEWISE_BEZIER_KNOTS.); +#2711 = CARTESIAN_POINT('',(-14.14980880025,3.535533948838)); +#2712 = CARTESIAN_POINT('',(-14.14980880025,2.828440516448)); +#2713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2714 = PCURVE('',#2715,#2720); +#2715 = PLANE('',#2716); +#2716 = AXIS2_PLACEMENT_3D('',#2717,#2718,#2719); +#2717 = CARTESIAN_POINT('',(7.2593,92.75,-40.3351)); +#2718 = DIRECTION('',(1.,0.,0.)); +#2719 = DIRECTION('',(0.,0.,1.)); +#2720 = DEFINITIONAL_REPRESENTATION('',(#2721),#2725); +#2721 = LINE('',#2722,#2723); +#2722 = CARTESIAN_POINT('',(11.046560971254,-3.139663975038)); +#2723 = VECTOR('',#2724,1.); +#2724 = DIRECTION('',(0.707106781187,0.707106781187)); +#2725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2726 = ORIENTED_EDGE('',*,*,#2727,.F.); +#2727 = EDGE_CURVE('',#852,#2701,#2728,.T.); +#2728 = SURFACE_CURVE('',#2729,(#2733,#2740),.PCURVE_S1.); +#2729 = LINE('',#2730,#2731); +#2730 = CARTESIAN_POINT('',(-6.615508800332,94.436215507268, + -27.83509056097)); +#2731 = VECTOR('',#2732,1.); +#2732 = DIRECTION('',(-1.,-5.844283390569E-15,-1.152780867537E-15)); +#2733 = PCURVE('',#867,#2734); +#2734 = DEFINITIONAL_REPRESENTATION('',(#2735),#2739); +#2735 = LINE('',#2736,#2737); +#2736 = CARTESIAN_POINT('',(-0.274999999922,3.535533948838)); +#2737 = VECTOR('',#2738,1.); +#2738 = DIRECTION('',(1.,-8.265064833294E-15)); +#2739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2740 = PCURVE('',#895,#2741); +#2741 = DEFINITIONAL_REPRESENTATION('',(#2742),#2746); +#2742 = LINE('',#2743,#2744); +#2743 = CARTESIAN_POINT('',(12.499999969661,0.274999999922)); +#2744 = VECTOR('',#2745,1.); +#2745 = DIRECTION('',(1.270066057406E-28,1.)); +#2746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2747 = ADVANCED_FACE('',(#2748),#895,.T.); +#2748 = FACE_BOUND('',#2749,.T.); +#2749 = EDGE_LOOP('',(#2750,#2751,#2752,#2774)); +#2750 = ORIENTED_EDGE('',*,*,#879,.F.); +#2751 = ORIENTED_EDGE('',*,*,#2727,.T.); +#2752 = ORIENTED_EDGE('',*,*,#2753,.F.); +#2753 = EDGE_CURVE('',#2754,#2701,#2756,.T.); +#2754 = VERTEX_POINT('',#2755); +#2755 = CARTESIAN_POINT('',(7.2593,94.436215507268,-35.33509053063)); +#2756 = SURFACE_CURVE('',#2757,(#2761,#2767),.PCURVE_S1.); +#2757 = LINE('',#2758,#2759); +#2758 = CARTESIAN_POINT('',(7.2593,94.436215507268,-40.33509526531)); +#2759 = VECTOR('',#2760,1.); +#2760 = DIRECTION('',(0.,-2.346507503525E-14,1.)); +#2761 = PCURVE('',#895,#2762); +#2762 = DEFINITIONAL_REPRESENTATION('',(#2763),#2766); +#2763 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2764,#2765),.UNSPECIFIED.,.F., + .F.,(2,2),(5.000004734681,12.500004734681),.PIECEWISE_BEZIER_KNOTS.); +#2764 = CARTESIAN_POINT('',(4.999999999999,-13.59980880041)); +#2765 = CARTESIAN_POINT('',(12.5,-13.59980880041)); +#2766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2767 = PCURVE('',#2715,#2768); +#2768 = DEFINITIONAL_REPRESENTATION('',(#2769),#2773); +#2769 = LINE('',#2770,#2771); +#2770 = CARTESIAN_POINT('',(4.734681823493E-06,-1.686215507268)); +#2771 = VECTOR('',#2772,1.); +#2772 = DIRECTION('',(1.,2.346507503525E-14)); +#2773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2774 = ORIENTED_EDGE('',*,*,#2775,.T.); +#2775 = EDGE_CURVE('',#2754,#880,#2776,.T.); +#2776 = SURFACE_CURVE('',#2777,(#2781,#2788),.PCURVE_S1.); +#2777 = LINE('',#2778,#2779); +#2778 = CARTESIAN_POINT('',(5.859322901415,94.436215507268, + -35.33509053063)); +#2779 = VECTOR('',#2780,1.); +#2780 = DIRECTION('',(1.,0.,0.)); +#2781 = PCURVE('',#895,#2782); +#2782 = DEFINITIONAL_REPRESENTATION('',(#2783),#2787); +#2783 = LINE('',#2784,#2785); +#2784 = CARTESIAN_POINT('',(4.999999999999,-12.19983170182)); +#2785 = VECTOR('',#2786,1.); +#2786 = DIRECTION('',(-1.152780867537E-15,-1.)); +#2787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2788 = PCURVE('',#924,#2789); +#2789 = DEFINITIONAL_REPRESENTATION('',(#2790),#2794); +#2790 = LINE('',#2791,#2792); +#2791 = CARTESIAN_POINT('',(5.497787143782,12.199831701595)); +#2792 = VECTOR('',#2793,1.); +#2793 = DIRECTION('',(2.368502407319E-16,1.)); +#2794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2795 = ADVANCED_FACE('',(#2796),#924,.T.); +#2796 = FACE_BOUND('',#2797,.T.); +#2797 = EDGE_LOOP('',(#2798,#2821,#2822,#2823,#2824,#2825,#2849,#2875)); +#2798 = ORIENTED_EDGE('',*,*,#2799,.F.); +#2799 = EDGE_CURVE('',#2145,#2800,#2802,.T.); +#2800 = VERTEX_POINT('',#2801); +#2801 = CARTESIAN_POINT('',(2.2593,94.436215507268,-35.33509053063)); +#2802 = SURFACE_CURVE('',#2803,(#2807,#2814),.PCURVE_S1.); +#2803 = LINE('',#2804,#2805); +#2804 = CARTESIAN_POINT('',(5.859322901415,94.436215507268, + -35.33509053063)); +#2805 = VECTOR('',#2806,1.); +#2806 = DIRECTION('',(1.,0.,0.)); +#2807 = PCURVE('',#924,#2808); +#2808 = DEFINITIONAL_REPRESENTATION('',(#2809),#2813); +#2809 = LINE('',#2810,#2811); +#2810 = CARTESIAN_POINT('',(5.497787143782,12.199831701595)); +#2811 = VECTOR('',#2812,1.); +#2812 = DIRECTION('',(2.368502407319E-16,1.)); +#2813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2814 = PCURVE('',#2188,#2815); +#2815 = DEFINITIONAL_REPRESENTATION('',(#2816),#2820); +#2816 = LINE('',#2817,#2818); +#2817 = CARTESIAN_POINT('',(4.999999999999,-12.19983170182)); +#2818 = VECTOR('',#2819,1.); +#2819 = DIRECTION('',(-1.152780867537E-15,-1.)); +#2820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2821 = ORIENTED_EDGE('',*,*,#2144,.T.); +#2822 = ORIENTED_EDGE('',*,*,#2095,.T.); +#2823 = ORIENTED_EDGE('',*,*,#907,.F.); +#2824 = ORIENTED_EDGE('',*,*,#2775,.F.); +#2825 = ORIENTED_EDGE('',*,*,#2826,.T.); +#2826 = EDGE_CURVE('',#2754,#2827,#2829,.T.); +#2827 = VERTEX_POINT('',#2828); +#2828 = CARTESIAN_POINT('',(7.2593,98.75,-40.28777750616)); +#2829 = SURFACE_CURVE('',#2830,(#2835,#2842),.PCURVE_S1.); +#2830 = CIRCLE('',#2831,5.); +#2831 = AXIS2_PLACEMENT_3D('',#2832,#2833,#2834); +#2832 = CARTESIAN_POINT('',(7.2593,99.436215507268,-35.33509053063)); +#2833 = DIRECTION('',(1.,5.844283390569E-15,1.152780867537E-15)); +#2834 = DIRECTION('',(4.947671585305E-15,-0.707106781187,-0.707106781187 + )); +#2835 = PCURVE('',#924,#2836); +#2836 = DEFINITIONAL_REPRESENTATION('',(#2837),#2841); +#2837 = LINE('',#2838,#2839); +#2838 = CARTESIAN_POINT('',(-8.881784197001E-16,13.59980880018)); +#2839 = VECTOR('',#2840,1.); +#2840 = DIRECTION('',(1.,0.)); +#2841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2842 = PCURVE('',#2715,#2843); +#2843 = DEFINITIONAL_REPRESENTATION('',(#2844),#2848); +#2844 = CIRCLE('',#2845,5.); +#2845 = AXIS2_PLACEMENT_2D('',#2846,#2847); +#2846 = CARTESIAN_POINT('',(5.000009469363,-6.686215507268)); +#2847 = DIRECTION('',(-0.707106781187,0.707106781187)); +#2848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2849 = ORIENTED_EDGE('',*,*,#2850,.F.); +#2850 = EDGE_CURVE('',#2851,#2827,#2853,.T.); +#2851 = VERTEX_POINT('',#2852); +#2852 = CARTESIAN_POINT('',(2.2593,98.75,-40.28777750616)); +#2853 = SURFACE_CURVE('',#2854,(#2858,#2864),.PCURVE_S1.); +#2854 = LINE('',#2855,#2856); +#2855 = CARTESIAN_POINT('',(-6.34050880018,98.75,-40.28777750616)); +#2856 = VECTOR('',#2857,1.); +#2857 = DIRECTION('',(1.,5.844283390569E-15,1.152780867537E-15)); +#2858 = PCURVE('',#924,#2859); +#2859 = DEFINITIONAL_REPRESENTATION('',(#2860),#2863); +#2860 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2861,#2862),.UNSPECIFIED.,.F., + .F.,(2,2),(8.09980880018,13.599832301596),.PIECEWISE_BEZIER_KNOTS.); +#2861 = CARTESIAN_POINT('',(6.93090583152,8.09980880018)); +#2862 = CARTESIAN_POINT('',(6.93090583152,13.599832301596)); +#2863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2864 = PCURVE('',#2865,#2870); +#2865 = PLANE('',#2866); +#2866 = AXIS2_PLACEMENT_3D('',#2867,#2868,#2869); +#2867 = CARTESIAN_POINT('',(2.2593,98.75,-40.3351)); +#2868 = DIRECTION('',(0.,1.,0.)); +#2869 = DIRECTION('',(0.,0.,1.)); +#2870 = DEFINITIONAL_REPRESENTATION('',(#2871),#2874); +#2871 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2872,#2873),.UNSPECIFIED.,.F., + .F.,(2,2),(8.09980880018,13.599832301596),.PIECEWISE_BEZIER_KNOTS.); +#2872 = CARTESIAN_POINT('',(4.732249383292E-02,-0.5)); +#2873 = CARTESIAN_POINT('',(4.732249383293E-02,5.000023501415)); +#2874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2875 = ORIENTED_EDGE('',*,*,#2876,.F.); +#2876 = EDGE_CURVE('',#2800,#2851,#2877,.T.); +#2877 = SURFACE_CURVE('',#2878,(#2883,#2890),.PCURVE_S1.); +#2878 = CIRCLE('',#2879,5.); +#2879 = AXIS2_PLACEMENT_3D('',#2880,#2881,#2882); +#2880 = CARTESIAN_POINT('',(2.2593,99.436215507268,-35.33509053063)); +#2881 = DIRECTION('',(1.,5.844283390569E-15,1.152780867537E-15)); +#2882 = DIRECTION('',(4.947671585305E-15,-0.707106781187,-0.707106781187 + )); +#2883 = PCURVE('',#924,#2884); +#2884 = DEFINITIONAL_REPRESENTATION('',(#2885),#2889); +#2885 = LINE('',#2886,#2887); +#2886 = CARTESIAN_POINT('',(-8.881784197001E-16,8.59980880018)); +#2887 = VECTOR('',#2888,1.); +#2888 = DIRECTION('',(1.,0.)); +#2889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2890 = PCURVE('',#2661,#2891); +#2891 = DEFINITIONAL_REPRESENTATION('',(#2892),#2896); +#2892 = CIRCLE('',#2893,5.); +#2893 = AXIS2_PLACEMENT_2D('',#2894,#2895); +#2894 = CARTESIAN_POINT('',(5.000009469363,-6.686215507268)); +#2895 = DIRECTION('',(-0.707106781187,0.707106781187)); +#2896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2897 = ADVANCED_FACE('',(#2898),#982,.F.); +#2898 = FACE_BOUND('',#2899,.F.); +#2899 = EDGE_LOOP('',(#2900,#2923,#2924,#2925)); +#2900 = ORIENTED_EDGE('',*,*,#2901,.T.); +#2901 = EDGE_CURVE('',#2902,#962,#2904,.T.); +#2902 = VERTEX_POINT('',#2903); +#2903 = CARTESIAN_POINT('',(-0.240592800216,102.22140847692, + -17.51026644707)); +#2904 = SEAM_CURVE('',#2905,(#2909,#2916),.PCURVE_S1.); +#2905 = LINE('',#2906,#2907); +#2906 = CARTESIAN_POINT('',(-3.140508800215,102.22140847692, + -17.51026644707)); +#2907 = VECTOR('',#2908,1.); +#2908 = DIRECTION('',(1.,-3.72965547332E-16,1.152780867537E-15)); +#2909 = PCURVE('',#982,#2910); +#2910 = DEFINITIONAL_REPRESENTATION('',(#2911),#2915); +#2911 = LINE('',#2912,#2913); +#2912 = CARTESIAN_POINT('',(3.14159265359,-4.440892098501E-16)); +#2913 = VECTOR('',#2914,1.); +#2914 = DIRECTION('',(-4.144879212808E-16,1.)); +#2915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2916 = PCURVE('',#982,#2917); +#2917 = DEFINITIONAL_REPRESENTATION('',(#2918),#2922); +#2918 = LINE('',#2919,#2920); +#2919 = CARTESIAN_POINT('',(-3.14159265359,-4.440892098501E-16)); +#2920 = VECTOR('',#2921,1.); +#2921 = DIRECTION('',(-4.144879212808E-16,1.)); +#2922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2923 = ORIENTED_EDGE('',*,*,#961,.T.); +#2924 = ORIENTED_EDGE('',*,*,#2901,.F.); +#2925 = ORIENTED_EDGE('',*,*,#2926,.T.); +#2926 = EDGE_CURVE('',#2902,#2902,#2927,.T.); +#2927 = SURFACE_CURVE('',#2928,(#2933,#2940),.PCURVE_S1.); +#2928 = CIRCLE('',#2929,1.25); +#2929 = AXIS2_PLACEMENT_3D('',#2930,#2931,#2932); +#2930 = CARTESIAN_POINT('',(-0.240592800216,100.97140847692, + -17.51026644707)); +#2931 = DIRECTION('',(1.,6.28663787695E-15,-1.069399905187E-15)); +#2932 = DIRECTION('',(6.28663787695E-15,-1.,-2.346507503525E-14)); +#2933 = PCURVE('',#982,#2934); +#2934 = DEFINITIONAL_REPRESENTATION('',(#2935),#2939); +#2935 = LINE('',#2936,#2937); +#2936 = CARTESIAN_POINT('',(-6.28318530718,2.899915999999)); +#2937 = VECTOR('',#2938,1.); +#2938 = DIRECTION('',(1.,0.)); +#2939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2940 = PCURVE('',#2420,#2941); +#2941 = DEFINITIONAL_REPRESENTATION('',(#2942),#2950); +#2942 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2943,#2944,#2945,#2946, +#2947,#2948,#2949),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2943 = CARTESIAN_POINT('',(8.075000000001,-1.250000000001)); +#2944 = CARTESIAN_POINT('',(5.90993649054,-1.250000000001)); +#2945 = CARTESIAN_POINT('',(6.99246824527,0.624999999999)); +#2946 = CARTESIAN_POINT('',(8.075000000001,2.499999999999)); +#2947 = CARTESIAN_POINT('',(9.157531754731,0.624999999999)); +#2948 = CARTESIAN_POINT('',(10.240063509462,-1.250000000001)); +#2949 = CARTESIAN_POINT('',(8.075000000001,-1.250000000001)); +#2950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2951 = ADVANCED_FACE('',(#2952),#1014,.T.); +#2952 = FACE_BOUND('',#2953,.T.); +#2953 = EDGE_LOOP('',(#2954,#2955,#2976,#2977)); +#2954 = ORIENTED_EDGE('',*,*,#2251,.F.); +#2955 = ORIENTED_EDGE('',*,*,#2956,.T.); +#2956 = EDGE_CURVE('',#2229,#999,#2957,.T.); +#2957 = SURFACE_CURVE('',#2958,(#2962,#2969),.PCURVE_S1.); +#2958 = LINE('',#2959,#2960); +#2959 = CARTESIAN_POINT('',(-7.440508800294,98.936215507268, + -37.33509053063)); +#2960 = VECTOR('',#2961,1.); +#2961 = DIRECTION('',(1.,6.316128176035E-15,3.002712059975E-15)); +#2962 = PCURVE('',#1014,#2963); +#2963 = DEFINITIONAL_REPRESENTATION('',(#2964),#2968); +#2964 = LINE('',#2965,#2966); +#2965 = CARTESIAN_POINT('',(5.5,-3.47387049682E-14)); +#2966 = VECTOR('',#2967,1.); +#2967 = DIRECTION('',(9.844109485414E-31,-1.)); +#2968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2969 = PCURVE('',#1042,#2970); +#2970 = DEFINITIONAL_REPRESENTATION('',(#2971),#2975); +#2971 = LINE('',#2972,#2973); +#2972 = CARTESIAN_POINT('',(-5.073,-4.574617243851E-15)); +#2973 = VECTOR('',#2974,1.); +#2974 = DIRECTION('',(-1.972152263053E-30,-1.)); +#2975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2976 = ORIENTED_EDGE('',*,*,#996,.F.); +#2977 = ORIENTED_EDGE('',*,*,#2978,.T.); +#2978 = EDGE_CURVE('',#997,#2252,#2979,.T.); +#2979 = SURFACE_CURVE('',#2980,(#2984,#2991),.PCURVE_S1.); +#2980 = LINE('',#2981,#2982); +#2981 = CARTESIAN_POINT('',(-7.440508800216,102.93621550726, + -37.33509053063)); +#2982 = VECTOR('',#2983,1.); +#2983 = DIRECTION('',(-1.,-6.316128176035E-15,-3.002712059975E-15)); +#2984 = PCURVE('',#1014,#2985); +#2985 = DEFINITIONAL_REPRESENTATION('',(#2986),#2990); +#2986 = LINE('',#2987,#2988); +#2987 = CARTESIAN_POINT('',(9.500000000001,-7.809003010201E-11)); +#2988 = VECTOR('',#2989,1.); +#2989 = DIRECTION('',(-9.844109485414E-31,1.)); +#2990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2991 = PCURVE('',#1096,#2992); +#2992 = DEFINITIONAL_REPRESENTATION('',(#2993),#2997); +#2993 = LINE('',#2994,#2995); +#2994 = CARTESIAN_POINT('',(10.073,7.805040673568E-11)); +#2995 = VECTOR('',#2996,1.); +#2996 = DIRECTION('',(-1.972152263053E-30,1.)); +#2997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2998 = ADVANCED_FACE('',(#2999),#1042,.T.); +#2999 = FACE_BOUND('',#3000,.T.); +#3000 = EDGE_LOOP('',(#3001,#3002,#3025,#3048,#3069,#3070)); +#3001 = ORIENTED_EDGE('',*,*,#2228,.F.); +#3002 = ORIENTED_EDGE('',*,*,#3003,.T.); +#3003 = EDGE_CURVE('',#2201,#3004,#3006,.T.); +#3004 = VERTEX_POINT('',#3005); +#3005 = CARTESIAN_POINT('',(1.959499999963,98.936215507268, + -34.83526644707)); +#3006 = SURFACE_CURVE('',#3007,(#3011,#3018),.PCURVE_S1.); +#3007 = LINE('',#3008,#3009); +#3008 = CARTESIAN_POINT('',(-5.940508800255,98.936215507268, + -34.83526644707)); +#3009 = VECTOR('',#3010,1.); +#3010 = DIRECTION('',(1.,6.288372600442E-15,-1.47053451828E-14)); +#3011 = PCURVE('',#1042,#3012); +#3012 = DEFINITIONAL_REPRESENTATION('',(#3013),#3017); +#3013 = LINE('',#3014,#3015); +#3014 = CARTESIAN_POINT('',(-7.572824083561,-1.500000000039)); +#3015 = VECTOR('',#3016,1.); +#3016 = DIRECTION('',(1.770805724277E-14,-1.)); +#3017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3018 = PCURVE('',#2216,#3019); +#3019 = DEFINITIONAL_REPRESENTATION('',(#3020),#3024); +#3020 = LINE('',#3021,#3022); +#3021 = CARTESIAN_POINT('',(13.895224307488,-1.499999999255)); +#3022 = VECTOR('',#3023,1.); +#3023 = DIRECTION('',(-5.642350789132E-11,1.)); +#3024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3025 = ORIENTED_EDGE('',*,*,#3026,.T.); +#3026 = EDGE_CURVE('',#3004,#3027,#3029,.T.); +#3027 = VERTEX_POINT('',#3028); +#3028 = CARTESIAN_POINT('',(1.959499999963,98.936215507268, + -34.83509053063)); +#3029 = SURFACE_CURVE('',#3030,(#3034,#3041),.PCURVE_S1.); +#3030 = LINE('',#3031,#3032); +#3031 = CARTESIAN_POINT('',(1.959499999963,98.936215507268, + -24.39917848885)); +#3032 = VECTOR('',#3033,1.); +#3033 = DIRECTION('',(-6.253645076815E-15,-2.344686043875E-14,1.)); +#3034 = PCURVE('',#1042,#3035); +#3035 = DEFINITIONAL_REPRESENTATION('',(#3036),#3040); +#3036 = LINE('',#3037,#3038); +#3037 = CARTESIAN_POINT('',(-18.00891204178,-9.400008800257)); +#3038 = VECTOR('',#3039,1.); +#3039 = DIRECTION('',(-1.,3.25093301684E-15)); +#3040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3041 = PCURVE('',#1680,#3042); +#3042 = DEFINITIONAL_REPRESENTATION('',(#3043),#3047); +#3043 = LINE('',#3044,#3045); +#3044 = CARTESIAN_POINT('',(24.336215507268,-18.00891204178)); +#3045 = VECTOR('',#3046,1.); +#3046 = DIRECTION('',(-1.749928784592E-14,1.)); +#3047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3048 = ORIENTED_EDGE('',*,*,#3049,.F.); +#3049 = EDGE_CURVE('',#1027,#3027,#3050,.T.); +#3050 = SURFACE_CURVE('',#3051,(#3055,#3062),.PCURVE_S1.); +#3051 = LINE('',#3052,#3053); +#3052 = CARTESIAN_POINT('',(-7.440508800294,98.936215507268, + -34.83509053063)); +#3053 = VECTOR('',#3054,1.); +#3054 = DIRECTION('',(-1.,-6.316128176035E-15,4.078389144537E-16)); +#3055 = PCURVE('',#1042,#3056); +#3056 = DEFINITIONAL_REPRESENTATION('',(#3057),#3061); +#3057 = LINE('',#3058,#3059); +#3058 = CARTESIAN_POINT('',(-7.573,1.273626144991E-13)); +#3059 = VECTOR('',#3060,1.); +#3060 = DIRECTION('',(-3.410550974429E-15,1.)); +#3061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3062 = PCURVE('',#1070,#3063); +#3063 = DEFINITIONAL_REPRESENTATION('',(#3064),#3068); +#3064 = LINE('',#3065,#3066); +#3065 = CARTESIAN_POINT('',(9.5,1.410052630213E-13)); +#3066 = VECTOR('',#3067,1.); +#3067 = DIRECTION('',(2.949029909402E-17,-1.)); +#3068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3069 = ORIENTED_EDGE('',*,*,#1026,.F.); +#3070 = ORIENTED_EDGE('',*,*,#2956,.F.); +#3071 = ADVANCED_FACE('',(#3072),#1070,.F.); +#3072 = FACE_BOUND('',#3073,.T.); +#3073 = EDGE_LOOP('',(#3074,#3097,#3098,#3099)); +#3074 = ORIENTED_EDGE('',*,*,#3075,.T.); +#3075 = EDGE_CURVE('',#3076,#1055,#3078,.T.); +#3076 = VERTEX_POINT('',#3077); +#3077 = CARTESIAN_POINT('',(1.959499999963,102.93621550726, + -34.83509053063)); +#3078 = SURFACE_CURVE('',#3079,(#3083,#3090),.PCURVE_S1.); +#3079 = LINE('',#3080,#3081); +#3080 = CARTESIAN_POINT('',(-7.440508800216,102.93621550726, + -34.83509053063)); +#3081 = VECTOR('',#3082,1.); +#3082 = DIRECTION('',(1.,6.316128176035E-15,-4.078389144537E-16)); +#3083 = PCURVE('',#1070,#3084); +#3084 = DEFINITIONAL_REPRESENTATION('',(#3085),#3089); +#3085 = LINE('',#3086,#3087); +#3086 = CARTESIAN_POINT('',(5.499999999999,7.820594866148E-11)); +#3087 = VECTOR('',#3088,1.); +#3088 = DIRECTION('',(-2.949029909402E-17,1.)); +#3089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3090 = PCURVE('',#1096,#3091); +#3091 = DEFINITIONAL_REPRESENTATION('',(#3092),#3096); +#3092 = LINE('',#3093,#3094); +#3093 = CARTESIAN_POINT('',(12.573,7.81725740048E-11)); +#3094 = VECTOR('',#3095,1.); +#3095 = DIRECTION('',(-3.410550974429E-15,-1.)); +#3096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3097 = ORIENTED_EDGE('',*,*,#1054,.F.); +#3098 = ORIENTED_EDGE('',*,*,#3049,.T.); +#3099 = ORIENTED_EDGE('',*,*,#3100,.T.); +#3100 = EDGE_CURVE('',#3027,#3076,#3101,.T.); +#3101 = SURFACE_CURVE('',#3102,(#3106,#3113),.PCURVE_S1.); +#3102 = LINE('',#3103,#3104); +#3103 = CARTESIAN_POINT('',(1.959499999963,91.518107753634, + -34.83509053063)); +#3104 = VECTOR('',#3105,1.); +#3105 = DIRECTION('',(-1.221864932636E-27,1.,2.344686043875E-14)); +#3106 = PCURVE('',#1070,#3107); +#3107 = DEFINITIONAL_REPRESENTATION('',(#3108),#3112); +#3108 = LINE('',#3109,#3110); +#3109 = CARTESIAN_POINT('',(16.918107753634,9.400008800257)); +#3110 = VECTOR('',#3111,1.); +#3111 = DIRECTION('',(-1.,6.28663787694E-15)); +#3112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3113 = PCURVE('',#1680,#3114); +#3114 = DEFINITIONAL_REPRESENTATION('',(#3115),#3119); +#3115 = LINE('',#3116,#3117); +#3116 = CARTESIAN_POINT('',(16.918107753634,-28.44482408356)); +#3117 = VECTOR('',#3118,1.); +#3118 = DIRECTION('',(1.,1.749928784592E-14)); +#3119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3120 = ADVANCED_FACE('',(#3121),#1096,.T.); +#3121 = FACE_BOUND('',#3122,.T.); +#3122 = EDGE_LOOP('',(#3123,#3124,#3125,#3126,#3127,#3150)); +#3123 = ORIENTED_EDGE('',*,*,#2274,.F.); +#3124 = ORIENTED_EDGE('',*,*,#2978,.F.); +#3125 = ORIENTED_EDGE('',*,*,#1082,.F.); +#3126 = ORIENTED_EDGE('',*,*,#3075,.F.); +#3127 = ORIENTED_EDGE('',*,*,#3128,.T.); +#3128 = EDGE_CURVE('',#3076,#3129,#3131,.T.); +#3129 = VERTEX_POINT('',#3130); +#3130 = CARTESIAN_POINT('',(1.959499999963,102.93621550726, + -34.83526644707)); +#3131 = SURFACE_CURVE('',#3132,(#3136,#3143),.PCURVE_S1.); +#3132 = LINE('',#3133,#3134); +#3133 = CARTESIAN_POINT('',(1.959499999963,102.93621550726, + -26.89917848885)); +#3134 = VECTOR('',#3135,1.); +#3135 = DIRECTION('',(6.253645076815E-15,2.344686043875E-14,-1.)); +#3136 = PCURVE('',#1096,#3137); +#3137 = DEFINITIONAL_REPRESENTATION('',(#3138),#3142); +#3138 = LINE('',#3139,#3140); +#3139 = CARTESIAN_POINT('',(20.508912041781,-9.400008800101)); +#3140 = VECTOR('',#3141,1.); +#3141 = DIRECTION('',(-1.,-3.25093301684E-15)); +#3142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3143 = PCURVE('',#1680,#3144); +#3144 = DEFINITIONAL_REPRESENTATION('',(#3145),#3149); +#3145 = LINE('',#3146,#3147); +#3146 = CARTESIAN_POINT('',(28.336215507268,-20.50891204178)); +#3147 = VECTOR('',#3148,1.); +#3148 = DIRECTION('',(1.749928784592E-14,-1.)); +#3149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3150 = ORIENTED_EDGE('',*,*,#3151,.T.); +#3151 = EDGE_CURVE('',#3129,#2275,#3152,.T.); +#3152 = SURFACE_CURVE('',#3153,(#3157,#3164),.PCURVE_S1.); +#3153 = LINE('',#3154,#3155); +#3154 = CARTESIAN_POINT('',(-5.940508800177,102.93621550726, + -34.83526644707)); +#3155 = VECTOR('',#3156,1.); +#3156 = DIRECTION('',(-1.,-6.288372600442E-15,1.47053451828E-14)); +#3157 = PCURVE('',#1096,#3158); +#3158 = DEFINITIONAL_REPRESENTATION('',(#3159),#3163); +#3159 = LINE('',#3160,#3161); +#3160 = CARTESIAN_POINT('',(12.572824083561,-1.499999999961)); +#3161 = VECTOR('',#3162,1.); +#3162 = DIRECTION('',(1.770805724277E-14,1.)); +#3163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3164 = PCURVE('',#1652,#3165); +#3165 = DEFINITIONAL_REPRESENTATION('',(#3166),#3170); +#3166 = LINE('',#3167,#3168); +#3167 = CARTESIAN_POINT('',(9.895224307488,-1.499999999402)); +#3168 = VECTOR('',#3169,1.); +#3169 = DIRECTION('',(5.642350789132E-11,-1.)); +#3170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3171 = ADVANCED_FACE('',(#3172),#1128,.T.); +#3172 = FACE_BOUND('',#3173,.T.); +#3173 = EDGE_LOOP('',(#3174,#3204,#3225,#3226,#3249,#3275)); +#3174 = ORIENTED_EDGE('',*,*,#3175,.F.); +#3175 = EDGE_CURVE('',#3176,#3178,#3180,.T.); +#3176 = VERTEX_POINT('',#3177); +#3177 = CARTESIAN_POINT('',(5.359322901416,97.921408476915, + -24.28526644707)); +#3178 = VERTEX_POINT('',#3179); +#3179 = CARTESIAN_POINT('',(5.359322901415,97.921408476915,-27.3351)); +#3180 = SURFACE_CURVE('',#3181,(#3185,#3192),.PCURVE_S1.); +#3181 = LINE('',#3182,#3183); +#3182 = CARTESIAN_POINT('',(5.359322901415,97.921408476915, + -33.91026644707)); +#3183 = VECTOR('',#3184,1.); +#3184 = DIRECTION('',(-4.660627617663E-16,-5.594232025409E-16,-1.)); +#3185 = PCURVE('',#1128,#3186); +#3186 = DEFINITIONAL_REPRESENTATION('',(#3187),#3191); +#3187 = LINE('',#3188,#3189); +#3188 = CARTESIAN_POINT('',(-3.525,-0.5)); +#3189 = VECTOR('',#3190,1.); +#3190 = DIRECTION('',(-1.,-4.660627617662E-16)); +#3191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3192 = PCURVE('',#3193,#3198); +#3193 = PLANE('',#3194); +#3194 = AXIS2_PLACEMENT_3D('',#3195,#3196,#3197); +#3195 = CARTESIAN_POINT('',(5.359322901415,76.790991199863, + -37.43526644707)); +#3196 = DIRECTION('',(-1.,-5.134781489103E-16,4.660627617663E-16)); +#3197 = DIRECTION('',(4.660627617663E-16,-2.371278885918E-14,1.)); +#3198 = DEFINITIONAL_REPRESENTATION('',(#3199),#3203); +#3199 = LINE('',#3200,#3201); +#3200 = CARTESIAN_POINT('',(3.525,21.130417277052)); +#3201 = VECTOR('',#3202,1.); +#3202 = DIRECTION('',(-1.,-2.427221206172E-14)); +#3203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3204 = ORIENTED_EDGE('',*,*,#3205,.T.); +#3205 = EDGE_CURVE('',#3176,#1113,#3206,.T.); +#3206 = SURFACE_CURVE('',#3207,(#3211,#3218),.PCURVE_S1.); +#3207 = LINE('',#3208,#3209); +#3208 = CARTESIAN_POINT('',(5.859322901415,97.921408476915, + -24.28526644707)); +#3209 = VECTOR('',#3210,1.); +#3210 = DIRECTION('',(1.,0.,0.)); +#3211 = PCURVE('',#1128,#3212); +#3212 = DEFINITIONAL_REPRESENTATION('',(#3213),#3217); +#3213 = LINE('',#3214,#3215); +#3214 = CARTESIAN_POINT('',(6.1,-8.240638231165E-29)); +#3215 = VECTOR('',#3216,1.); +#3216 = DIRECTION('',(1.350924300191E-29,1.)); +#3217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3218 = PCURVE('',#1156,#3219); +#3219 = DEFINITIONAL_REPRESENTATION('',(#3220),#3224); +#3220 = LINE('',#3221,#3222); +#3221 = CARTESIAN_POINT('',(0.,0.)); +#3222 = VECTOR('',#3223,1.); +#3223 = DIRECTION('',(5.828670879206E-16,1.)); +#3224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3225 = ORIENTED_EDGE('',*,*,#1110,.F.); +#3226 = ORIENTED_EDGE('',*,*,#3227,.F.); +#3227 = EDGE_CURVE('',#3228,#1111,#3230,.T.); +#3228 = VERTEX_POINT('',#3229); +#3229 = CARTESIAN_POINT('',(7.2593,97.921408476915,-30.38526644707)); +#3230 = SURFACE_CURVE('',#3231,(#3235,#3242),.PCURVE_S1.); +#3231 = LINE('',#3232,#3233); +#3232 = CARTESIAN_POINT('',(5.859322901415,97.921408476915, + -30.38526644707)); +#3233 = VECTOR('',#3234,1.); +#3234 = DIRECTION('',(1.,0.,0.)); +#3235 = PCURVE('',#1128,#3236); +#3236 = DEFINITIONAL_REPRESENTATION('',(#3237),#3241); +#3237 = LINE('',#3238,#3239); +#3238 = CARTESIAN_POINT('',(0.,0.)); +#3239 = VECTOR('',#3240,1.); +#3240 = DIRECTION('',(1.350924300191E-29,1.)); +#3241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3242 = PCURVE('',#1210,#3243); +#3243 = DEFINITIONAL_REPRESENTATION('',(#3244),#3248); +#3244 = LINE('',#3245,#3246); +#3245 = CARTESIAN_POINT('',(6.1,3.555489236316E-15)); +#3246 = VECTOR('',#3247,1.); +#3247 = DIRECTION('',(-5.828670879206E-16,1.)); +#3248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3249 = ORIENTED_EDGE('',*,*,#3250,.F.); +#3250 = EDGE_CURVE('',#3251,#3228,#3253,.T.); +#3251 = VERTEX_POINT('',#3252); +#3252 = CARTESIAN_POINT('',(7.2593,97.921408476915,-27.3351)); +#3253 = SURFACE_CURVE('',#3254,(#3258,#3264),.PCURVE_S1.); +#3254 = LINE('',#3255,#3256); +#3255 = CARTESIAN_POINT('',(7.2593,97.921408476915,-35.36018322353)); +#3256 = VECTOR('',#3257,1.); +#3257 = DIRECTION('',(0.,-5.594232025409E-16,-1.)); +#3258 = PCURVE('',#1128,#3259); +#3259 = DEFINITIONAL_REPRESENTATION('',(#3260),#3263); +#3260 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3261,#3262),.UNSPECIFIED.,.F., + .F.,(2,2),(-8.025083223538,-4.974916776462),.PIECEWISE_BEZIER_KNOTS.); +#3261 = CARTESIAN_POINT('',(3.050166447076,1.399977098585)); +#3262 = CARTESIAN_POINT('',(0.,1.399977098585)); +#3263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3264 = PCURVE('',#3265,#3270); +#3265 = PLANE('',#3266); +#3266 = AXIS2_PLACEMENT_3D('',#3267,#3268,#3269); +#3267 = CARTESIAN_POINT('',(7.2593,92.75,-40.3351)); +#3268 = DIRECTION('',(1.,0.,0.)); +#3269 = DIRECTION('',(0.,0.,1.)); +#3270 = DEFINITIONAL_REPRESENTATION('',(#3271),#3274); +#3271 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3272,#3273),.UNSPECIFIED.,.F., + .F.,(2,2),(-8.025083223538,-4.974916776462),.PIECEWISE_BEZIER_KNOTS.); +#3272 = CARTESIAN_POINT('',(13.,-5.171408476915)); +#3273 = CARTESIAN_POINT('',(9.949833552924,-5.171408476915)); +#3274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3275 = ORIENTED_EDGE('',*,*,#3276,.F.); +#3276 = EDGE_CURVE('',#3178,#3251,#3277,.T.); +#3277 = SURFACE_CURVE('',#3278,(#3282,#3288),.PCURVE_S1.); +#3278 = LINE('',#3279,#3280); +#3279 = CARTESIAN_POINT('',(4.059311450708,97.921408476915,-27.3351)); +#3280 = VECTOR('',#3281,1.); +#3281 = DIRECTION('',(1.,-0.,0.)); +#3282 = PCURVE('',#1128,#3283); +#3283 = DEFINITIONAL_REPRESENTATION('',(#3284),#3287); +#3284 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3285,#3286),.UNSPECIFIED.,.F., + .F.,(2,2),(1.300011450708,3.199988549292),.PIECEWISE_BEZIER_KNOTS.); +#3285 = CARTESIAN_POINT('',(3.050166447076,-0.5)); +#3286 = CARTESIAN_POINT('',(3.050166447076,1.399977098585)); +#3287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3288 = PCURVE('',#3289,#3294); +#3289 = PLANE('',#3290); +#3290 = AXIS2_PLACEMENT_3D('',#3291,#3292,#3293); +#3291 = CARTESIAN_POINT('',(2.2593,92.75,-27.3351)); +#3292 = DIRECTION('',(0.,0.,1.)); +#3293 = DIRECTION('',(1.,0.,0.)); +#3294 = DEFINITIONAL_REPRESENTATION('',(#3295),#3298); +#3295 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3296,#3297),.UNSPECIFIED.,.F., + .F.,(2,2),(1.300011450708,3.199988549292),.PIECEWISE_BEZIER_KNOTS.); +#3296 = CARTESIAN_POINT('',(3.100022901415,5.171408476915)); +#3297 = CARTESIAN_POINT('',(5.,5.171408476915)); +#3298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3299 = ADVANCED_FACE('',(#3300),#1156,.T.); +#3300 = FACE_BOUND('',#3301,.T.); +#3301 = EDGE_LOOP('',(#3302,#3325,#3346,#3347)); +#3302 = ORIENTED_EDGE('',*,*,#3303,.F.); +#3303 = EDGE_CURVE('',#3304,#3176,#3306,.T.); +#3304 = VERTEX_POINT('',#3305); +#3305 = CARTESIAN_POINT('',(5.359322901416,104.02140847691, + -24.28526644707)); +#3306 = SURFACE_CURVE('',#3307,(#3311,#3318),.PCURVE_S1.); +#3307 = LINE('',#3308,#3309); +#3308 = CARTESIAN_POINT('',(5.359322901415,87.356199838389, + -24.28526644707)); +#3309 = VECTOR('',#3310,1.); +#3310 = DIRECTION('',(5.134781489103E-16,-1.,-1.68591895574E-16)); +#3311 = PCURVE('',#1156,#3312); +#3312 = DEFINITIONAL_REPRESENTATION('',(#3313),#3317); +#3313 = LINE('',#3314,#3315); +#3314 = CARTESIAN_POINT('',(-10.56520863852,-0.5)); +#3315 = VECTOR('',#3316,1.); +#3316 = DIRECTION('',(-1.,1.096345236831E-15)); +#3317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3318 = PCURVE('',#3193,#3319); +#3319 = DEFINITIONAL_REPRESENTATION('',(#3320),#3324); +#3320 = LINE('',#3321,#3322); +#3321 = CARTESIAN_POINT('',(13.15,10.565208638526)); +#3322 = VECTOR('',#3323,1.); +#3323 = DIRECTION('',(2.35441969636E-14,-1.)); +#3324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3325 = ORIENTED_EDGE('',*,*,#3326,.T.); +#3326 = EDGE_CURVE('',#3304,#1141,#3327,.T.); +#3327 = SURFACE_CURVE('',#3328,(#3332,#3339),.PCURVE_S1.); +#3328 = LINE('',#3329,#3330); +#3329 = CARTESIAN_POINT('',(5.859322901415,104.02140847691, + -24.28526644707)); +#3330 = VECTOR('',#3331,1.); +#3331 = DIRECTION('',(1.,0.,0.)); +#3332 = PCURVE('',#1156,#3333); +#3333 = DEFINITIONAL_REPRESENTATION('',(#3334),#3338); +#3334 = LINE('',#3335,#3336); +#3335 = CARTESIAN_POINT('',(6.1,-3.555489236316E-15)); +#3336 = VECTOR('',#3337,1.); +#3337 = DIRECTION('',(5.828670879206E-16,1.)); +#3338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3339 = PCURVE('',#1184,#3340); +#3340 = DEFINITIONAL_REPRESENTATION('',(#3341),#3345); +#3341 = LINE('',#3342,#3343); +#3342 = CARTESIAN_POINT('',(-0.,0.)); +#3343 = VECTOR('',#3344,1.); +#3344 = DIRECTION('',(-1.360785061506E-29,1.)); +#3345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3346 = ORIENTED_EDGE('',*,*,#1140,.F.); +#3347 = ORIENTED_EDGE('',*,*,#3205,.F.); +#3348 = ADVANCED_FACE('',(#3349),#1184,.T.); +#3349 = FACE_BOUND('',#3350,.T.); +#3350 = EDGE_LOOP('',(#3351,#3374,#3400,#3426,#3447,#3448)); +#3351 = ORIENTED_EDGE('',*,*,#3352,.F.); +#3352 = EDGE_CURVE('',#3353,#3304,#3355,.T.); +#3353 = VERTEX_POINT('',#3354); +#3354 = CARTESIAN_POINT('',(5.359322901415,104.02140847691,-27.3351)); +#3355 = SURFACE_CURVE('',#3356,(#3360,#3367),.PCURVE_S1.); +#3356 = LINE('',#3357,#3358); +#3357 = CARTESIAN_POINT('',(5.359322901415,104.02140847691, + -30.86026644707)); +#3358 = VECTOR('',#3359,1.); +#3359 = DIRECTION('',(4.660627617663E-16,1.287438300656E-15,1.)); +#3360 = PCURVE('',#1184,#3361); +#3361 = DEFINITIONAL_REPRESENTATION('',(#3362),#3366); +#3362 = LINE('',#3363,#3364); +#3363 = CARTESIAN_POINT('',(6.575,-0.5)); +#3364 = VECTOR('',#3365,1.); +#3365 = DIRECTION('',(-1.,4.660627617662E-16)); +#3366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3367 = PCURVE('',#3193,#3368); +#3368 = DEFINITIONAL_REPRESENTATION('',(#3369),#3373); +#3369 = LINE('',#3370,#3371); +#3370 = CARTESIAN_POINT('',(6.575,27.230417277052)); +#3371 = VECTOR('',#3372,1.); +#3372 = DIRECTION('',(1.,2.500022715983E-14)); +#3373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3374 = ORIENTED_EDGE('',*,*,#3375,.F.); +#3375 = EDGE_CURVE('',#3376,#3353,#3378,.T.); +#3376 = VERTEX_POINT('',#3377); +#3377 = CARTESIAN_POINT('',(7.2593,104.02140847691,-27.3351)); +#3378 = SURFACE_CURVE('',#3379,(#3383,#3389),.PCURVE_S1.); +#3379 = LINE('',#3380,#3381); +#3380 = CARTESIAN_POINT('',(4.059311450708,104.02140847691,-27.3351)); +#3381 = VECTOR('',#3382,1.); +#3382 = DIRECTION('',(-1.,0.,0.)); +#3383 = PCURVE('',#1184,#3384); +#3384 = DEFINITIONAL_REPRESENTATION('',(#3385),#3388); +#3385 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3386,#3387),.UNSPECIFIED.,.F., + .F.,(2,2),(-3.199988549292,-1.300011450708),.PIECEWISE_BEZIER_KNOTS.); +#3386 = CARTESIAN_POINT('',(3.049833552924,1.399977098585)); +#3387 = CARTESIAN_POINT('',(3.049833552924,-0.5)); +#3388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3389 = PCURVE('',#3390,#3395); +#3390 = PLANE('',#3391); +#3391 = AXIS2_PLACEMENT_3D('',#3392,#3393,#3394); +#3392 = CARTESIAN_POINT('',(2.2593,103.15,-27.3351)); +#3393 = DIRECTION('',(0.,0.,1.)); +#3394 = DIRECTION('',(1.,0.,0.)); +#3395 = DEFINITIONAL_REPRESENTATION('',(#3396),#3399); +#3396 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3397,#3398),.UNSPECIFIED.,.F., + .F.,(2,2),(-3.199988549292,-1.300011450708),.PIECEWISE_BEZIER_KNOTS.); +#3397 = CARTESIAN_POINT('',(5.,0.871408476915)); +#3398 = CARTESIAN_POINT('',(3.100022901415,0.871408476915)); +#3399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3400 = ORIENTED_EDGE('',*,*,#3401,.F.); +#3401 = EDGE_CURVE('',#3402,#3376,#3404,.T.); +#3402 = VERTEX_POINT('',#3403); +#3403 = CARTESIAN_POINT('',(7.2593,104.02140847691,-30.38526644707)); +#3404 = SURFACE_CURVE('',#3405,(#3409,#3415),.PCURVE_S1.); +#3405 = LINE('',#3406,#3407); +#3406 = CARTESIAN_POINT('',(7.2593,104.02140847691,-32.31018322353)); +#3407 = VECTOR('',#3408,1.); +#3408 = DIRECTION('',(-0.,1.287438300656E-15,1.)); +#3409 = PCURVE('',#1184,#3410); +#3410 = DEFINITIONAL_REPRESENTATION('',(#3411),#3414); +#3411 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3412,#3413),.UNSPECIFIED.,.F., + .F.,(2,2),(1.924916776462,4.975083223538),.PIECEWISE_BEZIER_KNOTS.); +#3412 = CARTESIAN_POINT('',(6.1,1.399977098585)); +#3413 = CARTESIAN_POINT('',(3.049833552924,1.399977098585)); +#3414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3415 = PCURVE('',#3416,#3421); +#3416 = PLANE('',#3417); +#3417 = AXIS2_PLACEMENT_3D('',#3418,#3419,#3420); +#3418 = CARTESIAN_POINT('',(7.2593,103.15,-40.3351)); +#3419 = DIRECTION('',(1.,0.,0.)); +#3420 = DIRECTION('',(0.,0.,1.)); +#3421 = DEFINITIONAL_REPRESENTATION('',(#3422),#3425); +#3422 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3423,#3424),.UNSPECIFIED.,.F., + .F.,(2,2),(1.924916776462,4.975083223538),.PIECEWISE_BEZIER_KNOTS.); +#3423 = CARTESIAN_POINT('',(9.949833552924,-0.871408476915)); +#3424 = CARTESIAN_POINT('',(13.,-0.871408476915)); +#3425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3426 = ORIENTED_EDGE('',*,*,#3427,.T.); +#3427 = EDGE_CURVE('',#3402,#1169,#3428,.T.); +#3428 = SURFACE_CURVE('',#3429,(#3433,#3440),.PCURVE_S1.); +#3429 = LINE('',#3430,#3431); +#3430 = CARTESIAN_POINT('',(5.859322901415,104.02140847691, + -30.38526644707)); +#3431 = VECTOR('',#3432,1.); +#3432 = DIRECTION('',(1.,0.,0.)); +#3433 = PCURVE('',#1184,#3434); +#3434 = DEFINITIONAL_REPRESENTATION('',(#3435),#3439); +#3435 = LINE('',#3436,#3437); +#3436 = CARTESIAN_POINT('',(6.1,8.300788875188E-29)); +#3437 = VECTOR('',#3438,1.); +#3438 = DIRECTION('',(-1.360785061506E-29,1.)); +#3439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3440 = PCURVE('',#1210,#3441); +#3441 = DEFINITIONAL_REPRESENTATION('',(#3442),#3446); +#3442 = LINE('',#3443,#3444); +#3443 = CARTESIAN_POINT('',(-0.,0.)); +#3444 = VECTOR('',#3445,1.); +#3445 = DIRECTION('',(-5.828670879206E-16,1.)); +#3446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3447 = ORIENTED_EDGE('',*,*,#1168,.F.); +#3448 = ORIENTED_EDGE('',*,*,#3326,.F.); +#3449 = ADVANCED_FACE('',(#3450),#1210,.T.); +#3450 = FACE_BOUND('',#3451,.T.); +#3451 = EDGE_LOOP('',(#3452,#3477,#3503,#3522,#3523,#3524,#3525,#3546)); +#3452 = ORIENTED_EDGE('',*,*,#3453,.F.); +#3453 = EDGE_CURVE('',#3454,#3456,#3458,.T.); +#3454 = VERTEX_POINT('',#3455); +#3455 = CARTESIAN_POINT('',(5.359322901415,98.75,-30.38526644707)); +#3456 = VERTEX_POINT('',#3457); +#3457 = CARTESIAN_POINT('',(5.359322901415,103.15,-30.38526644707)); +#3458 = SURFACE_CURVE('',#3459,(#3463,#3470),.PCURVE_S1.); +#3459 = LINE('',#3460,#3461); +#3460 = CARTESIAN_POINT('',(5.359322901415,90.406199838389, + -30.38526644707)); +#3461 = VECTOR('',#3462,1.); +#3462 = DIRECTION('',(-5.134781489103E-16,1.,1.68591895574E-16)); +#3463 = PCURVE('',#1210,#3464); +#3464 = DEFINITIONAL_REPRESENTATION('',(#3465),#3469); +#3465 = LINE('',#3466,#3467); +#3466 = CARTESIAN_POINT('',(13.615208638526,-0.5)); +#3467 = VECTOR('',#3468,1.); +#3468 = DIRECTION('',(-1.,-1.096345236831E-15)); +#3469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3470 = PCURVE('',#3193,#3471); +#3471 = DEFINITIONAL_REPRESENTATION('',(#3472),#3476); +#3472 = LINE('',#3473,#3474); +#3473 = CARTESIAN_POINT('',(7.05,13.615208638526)); +#3474 = VECTOR('',#3475,1.); +#3475 = DIRECTION('',(-2.35441969636E-14,1.)); +#3476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3477 = ORIENTED_EDGE('',*,*,#3478,.F.); +#3478 = EDGE_CURVE('',#3479,#3454,#3481,.T.); +#3479 = VERTEX_POINT('',#3480); +#3480 = CARTESIAN_POINT('',(7.2593,98.75,-30.38526644707)); +#3481 = SURFACE_CURVE('',#3482,(#3486,#3492),.PCURVE_S1.); +#3482 = LINE('',#3483,#3484); +#3483 = CARTESIAN_POINT('',(4.059311450708,98.75,-30.38526644707)); +#3484 = VECTOR('',#3485,1.); +#3485 = DIRECTION('',(-1.,0.,0.)); +#3486 = PCURVE('',#1210,#3487); +#3487 = DEFINITIONAL_REPRESENTATION('',(#3488),#3491); +#3488 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3489,#3490),.UNSPECIFIED.,.F., + .F.,(2,2),(-3.199988549292,-1.300011450708),.PIECEWISE_BEZIER_KNOTS.); +#3489 = CARTESIAN_POINT('',(5.271408476915,1.399977098585)); +#3490 = CARTESIAN_POINT('',(5.271408476915,-0.5)); +#3491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3492 = PCURVE('',#3493,#3498); +#3493 = PLANE('',#3494); +#3494 = AXIS2_PLACEMENT_3D('',#3495,#3496,#3497); +#3495 = CARTESIAN_POINT('',(2.2593,98.75,-40.3351)); +#3496 = DIRECTION('',(0.,1.,0.)); +#3497 = DIRECTION('',(0.,0.,1.)); +#3498 = DEFINITIONAL_REPRESENTATION('',(#3499),#3502); +#3499 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3500,#3501),.UNSPECIFIED.,.F., + .F.,(2,2),(-3.199988549292,-1.300011450708),.PIECEWISE_BEZIER_KNOTS.); +#3500 = CARTESIAN_POINT('',(9.949833552924,5.)); +#3501 = CARTESIAN_POINT('',(9.949833552924,3.100022901415)); +#3502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3503 = ORIENTED_EDGE('',*,*,#3504,.F.); +#3504 = EDGE_CURVE('',#3228,#3479,#3505,.T.); +#3505 = SURFACE_CURVE('',#3506,(#3510,#3516),.PCURVE_S1.); +#3506 = LINE('',#3507,#3508); +#3507 = CARTESIAN_POINT('',(7.2593,98.385704238457,-30.38526644707)); +#3508 = VECTOR('',#3509,1.); +#3509 = DIRECTION('',(-0.,1.,1.685918955739E-16)); +#3510 = PCURVE('',#1210,#3511); +#3511 = DEFINITIONAL_REPRESENTATION('',(#3512),#3515); +#3512 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3513,#3514),.UNSPECIFIED.,.F., + .F.,(2,2),(-0.464295761543,0.364295761543),.PIECEWISE_BEZIER_KNOTS.); +#3513 = CARTESIAN_POINT('',(6.1,1.399977098585)); +#3514 = CARTESIAN_POINT('',(5.271408476915,1.399977098585)); +#3515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3516 = PCURVE('',#3265,#3517); +#3517 = DEFINITIONAL_REPRESENTATION('',(#3518),#3521); +#3518 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3519,#3520),.UNSPECIFIED.,.F., + .F.,(2,2),(-0.464295761543,0.364295761543),.PIECEWISE_BEZIER_KNOTS.); +#3519 = CARTESIAN_POINT('',(9.949833552924,-5.171408476915)); +#3520 = CARTESIAN_POINT('',(9.949833552924,-6.)); +#3521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3522 = ORIENTED_EDGE('',*,*,#3227,.T.); +#3523 = ORIENTED_EDGE('',*,*,#1196,.F.); +#3524 = ORIENTED_EDGE('',*,*,#3427,.F.); +#3525 = ORIENTED_EDGE('',*,*,#3526,.F.); +#3526 = EDGE_CURVE('',#3527,#3402,#3529,.T.); +#3527 = VERTEX_POINT('',#3528); +#3528 = CARTESIAN_POINT('',(7.2593,103.15,-30.38526644707)); +#3529 = SURFACE_CURVE('',#3530,(#3534,#3540),.PCURVE_S1.); +#3530 = LINE('',#3531,#3532); +#3531 = CARTESIAN_POINT('',(7.2593,103.58570423845,-30.38526644707)); +#3532 = VECTOR('',#3533,1.); +#3533 = DIRECTION('',(-0.,1.,1.685918955739E-16)); +#3534 = PCURVE('',#1210,#3535); +#3535 = DEFINITIONAL_REPRESENTATION('',(#3536),#3539); +#3536 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3537,#3538),.UNSPECIFIED.,.F., + .F.,(2,2),(-0.435704238458,0.435704238457),.PIECEWISE_BEZIER_KNOTS.); +#3537 = CARTESIAN_POINT('',(0.871408476915,1.399977098585)); +#3538 = CARTESIAN_POINT('',(-8.881784197001E-16,1.399977098585)); +#3539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3540 = PCURVE('',#3416,#3541); +#3541 = DEFINITIONAL_REPRESENTATION('',(#3542),#3545); +#3542 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3543,#3544),.UNSPECIFIED.,.F., + .F.,(2,2),(-0.435704238458,0.435704238457),.PIECEWISE_BEZIER_KNOTS.); +#3543 = CARTESIAN_POINT('',(9.949833552924,0.)); +#3544 = CARTESIAN_POINT('',(9.949833552924,-0.871408476915)); +#3545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3546 = ORIENTED_EDGE('',*,*,#3547,.T.); +#3547 = EDGE_CURVE('',#3527,#3456,#3548,.T.); +#3548 = SURFACE_CURVE('',#3549,(#3553,#3559),.PCURVE_S1.); +#3549 = LINE('',#3550,#3551); +#3550 = CARTESIAN_POINT('',(4.059311450708,103.15,-30.38526644707)); +#3551 = VECTOR('',#3552,1.); +#3552 = DIRECTION('',(-1.,0.,0.)); +#3553 = PCURVE('',#1210,#3554); +#3554 = DEFINITIONAL_REPRESENTATION('',(#3555),#3558); +#3555 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3556,#3557),.UNSPECIFIED.,.F., + .F.,(2,2),(-3.199988549292,-1.300011450708),.PIECEWISE_BEZIER_KNOTS.); +#3556 = CARTESIAN_POINT('',(0.871408476915,1.399977098585)); +#3557 = CARTESIAN_POINT('',(0.871408476915,-0.5)); +#3558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3559 = PCURVE('',#3560,#3565); +#3560 = PLANE('',#3561); +#3561 = AXIS2_PLACEMENT_3D('',#3562,#3563,#3564); +#3562 = CARTESIAN_POINT('',(2.2593,103.15,-40.3351)); +#3563 = DIRECTION('',(0.,1.,0.)); +#3564 = DIRECTION('',(0.,0.,1.)); +#3565 = DEFINITIONAL_REPRESENTATION('',(#3566),#3569); +#3566 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3567,#3568),.UNSPECIFIED.,.F., + .F.,(2,2),(-3.199988549292,-1.300011450708),.PIECEWISE_BEZIER_KNOTS.); +#3567 = CARTESIAN_POINT('',(9.949833552924,5.)); +#3568 = CARTESIAN_POINT('',(9.949833552924,3.100022901415)); +#3569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3570 = ADVANCED_FACE('',(#3571),#1292,.F.); +#3571 = FACE_BOUND('',#3572,.F.); +#3572 = EDGE_LOOP('',(#3573,#3597,#3642,#3721,#3754,#3780)); +#3573 = ORIENTED_EDGE('',*,*,#3574,.F.); +#3574 = EDGE_CURVE('',#3575,#1275,#3577,.T.); +#3575 = VERTEX_POINT('',#3576); +#3576 = CARTESIAN_POINT('',(-0.240592800216,103.6216209262, + -20.62826644707)); +#3577 = SURFACE_CURVE('',#3578,(#3583,#3590),.PCURVE_S1.); +#3578 = CIRCLE('',#3579,1.7); +#3579 = AXIS2_PLACEMENT_3D('',#3580,#3581,#3582); +#3580 = CARTESIAN_POINT('',(-0.240504400126,105.3216209239, + -20.62826644707)); +#3581 = DIRECTION('',(-1.152780867537E-15,-5.701506641247E-15,1.)); +#3582 = DIRECTION('',(-5.844283390569E-15,1.,5.701506641247E-15)); +#3583 = PCURVE('',#1292,#3584); +#3584 = DEFINITIONAL_REPRESENTATION('',(#3585),#3589); +#3585 = LINE('',#3586,#3587); +#3586 = CARTESIAN_POINT('',(10.995574287564,-0.603462247149)); +#3587 = VECTOR('',#3588,1.); +#3588 = DIRECTION('',(-1.,-5.81140748718E-15)); +#3589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3590 = PCURVE('',#1342,#3591); +#3591 = DEFINITIONAL_REPRESENTATION('',(#3592),#3596); +#3592 = LINE('',#3593,#3594); +#3593 = CARTESIAN_POINT('',(10.995574287564,-0.207)); +#3594 = VECTOR('',#3595,1.); +#3595 = DIRECTION('',(-1.,0.)); +#3596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3597 = ORIENTED_EDGE('',*,*,#3598,.F.); +#3598 = EDGE_CURVE('',#3599,#3575,#3601,.T.); +#3599 = VERTEX_POINT('',#3600); +#3600 = CARTESIAN_POINT('',(-0.240592800216,103.3492548442, + -21.2858163354)); +#3601 = SURFACE_CURVE('',#3602,(#3606,#3635),.PCURVE_S1.); +#3602 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3603,#3604,#3605), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),( + 4.579408027072E-07,4.232137827947E-06),.PIECEWISE_BEZIER_KNOTS.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE(( +1.019824092153,1.101515870431,1.183207062103)) REPRESENTATION_ITEM('') + ); +#3603 = CARTESIAN_POINT('',(-0.240592800216,103.3492548442, + -21.2858163354)); +#3604 = CARTESIAN_POINT('',(-0.240592800216,103.49553808775, + -20.93265734522)); +#3605 = CARTESIAN_POINT('',(-0.240592800216,103.6216209262, + -20.62826644707)); +#3606 = PCURVE('',#1292,#3607); +#3607 = DEFINITIONAL_REPRESENTATION('',(#3608),#3634); +#3608 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3609,#3610,#3611,#3612,#3613, + #3614,#3615,#3616,#3617,#3618,#3619,#3620,#3621,#3622,#3623,#3624, + #3625,#3626,#3627,#3628,#3629,#3630,#3631,#3632,#3633), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (4.579408027072E-07,6.294952129454E-07,8.010496231835E-07, + 9.726040334217E-07,1.14415844366E-06,1.315712853898E-06, + 1.487267264136E-06,1.658821674374E-06,1.830376084613E-06, + 2.001930494851E-06,2.173484905089E-06,2.345039315327E-06, + 2.516593725565E-06,2.688148135803E-06,2.859702546042E-06, + 3.03125695628E-06,3.202811366518E-06,3.374365776756E-06, + 3.545920186994E-06,3.717474597232E-06,3.889029007471E-06, + 4.060583417709E-06,4.232137827947E-06),.QUASI_UNIFORM_KNOTS.); +#3609 = CARTESIAN_POINT('',(7.854026453286,5.408764117764E-02)); +#3610 = CARTESIAN_POINT('',(7.854026562085,4.252862546504E-02)); +#3611 = CARTESIAN_POINT('',(7.854026779682,1.957884975734E-02)); +#3612 = CARTESIAN_POINT('',(7.854027106079,-1.435158327448E-02)); +#3613 = CARTESIAN_POINT('',(7.854027432475,-4.779844060615E-02)); +#3614 = CARTESIAN_POINT('',(7.854027758872,-8.077196334326E-02)); +#3615 = CARTESIAN_POINT('',(7.854028085268,-0.113282134839)); +#3616 = CARTESIAN_POINT('',(7.854028411665,-0.145338651782)); +#3617 = CARTESIAN_POINT('',(7.854028738062,-0.176950944281)); +#3618 = CARTESIAN_POINT('',(7.854029064459,-0.20812818232)); +#3619 = CARTESIAN_POINT('',(7.854029390856,-0.23887928537)); +#3620 = CARTESIAN_POINT('',(7.854029717253,-0.269212930699)); +#3621 = CARTESIAN_POINT('',(7.85403004365,-0.299137561586)); +#3622 = CARTESIAN_POINT('',(7.854030370048,-0.328661395146)); +#3623 = CARTESIAN_POINT('',(7.854030696445,-0.357792429851)); +#3624 = CARTESIAN_POINT('',(7.854031022843,-0.386538452751)); +#3625 = CARTESIAN_POINT('',(7.854031349241,-0.414907046427)); +#3626 = CARTESIAN_POINT('',(7.854031675638,-0.442905595626)); +#3627 = CARTESIAN_POINT('',(7.854032002036,-0.470541293772)); +#3628 = CARTESIAN_POINT('',(7.854032328434,-0.497821148747)); +#3629 = CARTESIAN_POINT('',(7.854032654832,-0.524751990253)); +#3630 = CARTESIAN_POINT('',(7.854032981231,-0.551340470118)); +#3631 = CARTESIAN_POINT('',(7.854033307629,-0.577593087923)); +#3632 = CARTESIAN_POINT('',(7.854033525228,-0.594875110043)); +#3633 = CARTESIAN_POINT('',(7.854033634028,-0.60346224715)); +#3634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3635 = PCURVE('',#2420,#3636); +#3636 = DEFINITIONAL_REPRESENTATION('',(#3637),#3641); +#3637 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3638,#3639,#3640), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),( + 4.579408027072E-07,4.232137827947E-06),.PIECEWISE_BEZIER_KNOTS.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE(( +1.019824092153,1.101515870431,1.183207062103)) REPRESENTATION_ITEM('') + ); +#3638 = CARTESIAN_POINT('',(4.299450111673,2.377846367276)); +#3639 = CARTESIAN_POINT('',(4.652609101848,2.524129610828)); +#3640 = CARTESIAN_POINT('',(4.957,2.650212449276)); +#3641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3642 = ORIENTED_EDGE('',*,*,#3643,.F.); +#3643 = EDGE_CURVE('',#3644,#3599,#3646,.T.); +#3644 = VERTEX_POINT('',#3645); +#3645 = CARTESIAN_POINT('',(1.773019401168,104.43539355765, + -21.83519304586)); +#3646 = SURFACE_CURVE('',#3647,(#3658,#3687),.PCURVE_S1.); +#3647 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3648,#3649,#3650,#3651,#3652, + #3653,#3654,#3655,#3656,#3657),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,4),( + 1.220699148393,1.245949836486,1.353139241366,1.460328646246, + 1.460337486227),.UNSPECIFIED.); +#3648 = CARTESIAN_POINT('',(1.773015630252,104.43539021268, + -21.83519094446)); +#3649 = CARTESIAN_POINT('',(1.72959943132,104.37551943303, + -21.79748395533)); +#3650 = CARTESIAN_POINT('',(1.683261757032,104.31612399404, + -21.76144401013)); +#3651 = CARTESIAN_POINT('',(1.422802553855,104.0085831066, + -21.58124218595)); +#3652 = CARTESIAN_POINT('',(1.14096670112,103.76824121126, + -21.46497815492)); +#3653 = CARTESIAN_POINT('',(0.487759327668,103.43826890795, + -21.31885905619)); +#3654 = CARTESIAN_POINT('',(0.11679361614,103.3492548425,-21.28581633473 + )); +#3655 = CARTESIAN_POINT('',(-0.24053386673,103.3492548425, + -21.28581633473)); +#3656 = CARTESIAN_POINT('',(-0.240563333427,103.34925484307, + -21.28581633495)); +#3657 = CARTESIAN_POINT('',(-0.240592800216,103.3492548442, + -21.2858163354)); +#3658 = PCURVE('',#1292,#3659); +#3659 = DEFINITIONAL_REPRESENTATION('',(#3660),#3686); +#3660 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3661,#3662,#3663,#3664,#3665, + #3666,#3667,#3668,#3669,#3670,#3671,#3672,#3673,#3674,#3675,#3676, + #3677,#3678,#3679,#3680,#3681,#3682,#3683,#3684,#3685), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (1.220699148393,1.231591800113,1.242484451833,1.253377103552, + 1.264269755272,1.275162406992,1.286055058712,1.296947710431, + 1.307840362151,1.318733013871,1.32962566559,1.34051831731, + 1.35141096903,1.36230362075,1.373196272469,1.384088924189, + 1.394981575909,1.405874227628,1.416766879348,1.427659531068, + 1.438552182788,1.449444834507,1.460337486227), + .QUASI_UNIFORM_KNOTS.); +#3661 = CARTESIAN_POINT('',(6.697809470039,0.603462250244)); +#3662 = CARTESIAN_POINT('',(6.71199159874,0.587192549332)); +#3663 = CARTESIAN_POINT('',(6.740717763434,0.555285830613)); +#3664 = CARTESIAN_POINT('',(6.785022251722,0.50928977901)); +#3665 = CARTESIAN_POINT('',(6.830613453773,0.465148954198)); +#3666 = CARTESIAN_POINT('',(6.877766006082,0.42276627545)); +#3667 = CARTESIAN_POINT('',(6.926295263307,0.382350528898)); +#3668 = CARTESIAN_POINT('',(6.976102026242,0.344024370705)); +#3669 = CARTESIAN_POINT('',(7.027054549114,0.307910467846)); +#3670 = CARTESIAN_POINT('',(7.079024406581,0.274107554943)); +#3671 = CARTESIAN_POINT('',(7.131881966523,0.24269597273)); +#3672 = CARTESIAN_POINT('',(7.185503533656,0.213738046388)); +#3673 = CARTESIAN_POINT('',(7.239775098242,0.187272605125)); +#3674 = CARTESIAN_POINT('',(7.294599628146,0.163341245259)); +#3675 = CARTESIAN_POINT('',(7.349893896017,0.141896649792)); +#3676 = CARTESIAN_POINT('',(7.405576472585,0.122796826312)); +#3677 = CARTESIAN_POINT('',(7.461572983778,0.10609361796)); +#3678 = CARTESIAN_POINT('',(7.517791436076,9.177267688882E-02)); +#3679 = CARTESIAN_POINT('',(7.574132690418,7.981828215454E-02)); +#3680 = CARTESIAN_POINT('',(7.630492498408,7.019507823376E-02)); +#3681 = CARTESIAN_POINT('',(7.68676598846,6.285268485616E-02)); +#3682 = CARTESIAN_POINT('',(7.74285218446,5.772411677599E-02)); +#3683 = CARTESIAN_POINT('',(7.798656326071,5.472837732206E-02)); +#3684 = CARTESIAN_POINT('',(7.83561897164,5.408598651911E-02)); +#3685 = CARTESIAN_POINT('',(7.854026453286,5.408764117764E-02)); +#3686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3687 = PCURVE('',#3688,#3693); +#3688 = CYLINDRICAL_SURFACE('',#3689,6.5); +#3689 = AXIS2_PLACEMENT_3D('',#3690,#3691,#3692); +#3690 = CARTESIAN_POINT('',(1.959499999963,100.97140847692, + -27.33526644707)); +#3691 = DIRECTION('',(-1.,7.690607409862E-17,-1.152780867537E-15)); +#3692 = DIRECTION('',(-7.690607409859E-17,-1.,-2.346507503525E-14)); +#3693 = DEFINITIONAL_REPRESENTATION('',(#3694),#3720); +#3694 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3695,#3696,#3697,#3698,#3699, + #3700,#3701,#3702,#3703,#3704,#3705,#3706,#3707,#3708,#3709,#3710, + #3711,#3712,#3713,#3714,#3715,#3716,#3717,#3718,#3719), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (1.220699148393,1.231591800113,1.242484451833,1.253377103552, + 1.264269755272,1.275162406992,1.286055058712,1.296947710431, + 1.307840362151,1.318733013871,1.32962566559,1.34051831731, + 1.35141096903,1.36230362075,1.373196272469,1.384088924189, + 1.394981575909,1.405874227628,1.416766879348,1.427659531068, + 1.438552182788,1.449444834507,1.460337486227), + .QUASI_UNIFORM_KNOTS.); +#3695 = CARTESIAN_POINT('',(2.132844333698,0.186484369711)); +#3696 = CARTESIAN_POINT('',(2.128147655594,0.205229081243)); +#3697 = CARTESIAN_POINT('',(2.118831037146,0.243754449921)); +#3698 = CARTESIAN_POINT('',(2.105092925449,0.305020287094)); +#3699 = CARTESIAN_POINT('',(2.09160277958,0.369992750354)); +#3700 = CARTESIAN_POINT('',(2.078355834325,0.439394550474)); +#3701 = CARTESIAN_POINT('',(2.065425466837,0.512881845903)); +#3702 = CARTESIAN_POINT('',(2.052869175721,0.590337060656)); +#3703 = CARTESIAN_POINT('',(2.040749512442,0.671581994079)); +#3704 = CARTESIAN_POINT('',(2.029128319858,0.756454678634)); +#3705 = CARTESIAN_POINT('',(2.018068158406,0.844788838986)); +#3706 = CARTESIAN_POINT('',(2.007631759334,0.936419197875)); +#3707 = CARTESIAN_POINT('',(1.99788229025,1.031180793534)); +#3708 = CARTESIAN_POINT('',(1.988882469712,1.128906404151)); +#3709 = CARTESIAN_POINT('',(1.980697608681,1.229437532599)); +#3710 = CARTESIAN_POINT('',(1.973336777407,1.33241054669)); +#3711 = CARTESIAN_POINT('',(1.966808379229,1.437459300939)); +#3712 = CARTESIAN_POINT('',(1.961121140156,1.544218618079)); +#3713 = CARTESIAN_POINT('',(1.956283816744,1.652323061411)); +#3714 = CARTESIAN_POINT('',(1.952305310957,1.761407263752)); +#3715 = CARTESIAN_POINT('',(1.949194656404,1.871105839277)); +#3716 = CARTESIAN_POINT('',(1.946961018323,1.981053407221)); +#3717 = CARTESIAN_POINT('',(1.945613665752,2.090884585221)); +#3718 = CARTESIAN_POINT('',(1.945312509729,2.163784189903)); +#3719 = CARTESIAN_POINT('',(1.945312753931,2.200092800179)); +#3720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3721 = ORIENTED_EDGE('',*,*,#3722,.F.); +#3722 = EDGE_CURVE('',#3723,#3644,#3725,.T.); +#3723 = VERTEX_POINT('',#3724); +#3724 = CARTESIAN_POINT('',(1.959420094173,105.3216209239, + -21.83519094137)); +#3725 = SURFACE_CURVE('',#3726,(#3731,#3738),.PCURVE_S1.); +#3726 = CIRCLE('',#3727,2.199924494299); +#3727 = AXIS2_PLACEMENT_3D('',#3728,#3729,#3730); +#3728 = CARTESIAN_POINT('',(-0.240504400126,105.3216209239, + -21.83519094137)); +#3729 = DIRECTION('',(2.018656599356E-15,4.037313198712E-15,-1.)); +#3730 = DIRECTION('',(-6.00865753402E-15,1.,4.037313198712E-15)); +#3731 = PCURVE('',#1292,#3732); +#3732 = DEFINITIONAL_REPRESENTATION('',(#3733),#3737); +#3733 = LINE('',#3734,#3735); +#3734 = CARTESIAN_POINT('',(4.712388980385,0.603462247149)); +#3735 = VECTOR('',#3736,1.); +#3736 = DIRECTION('',(1.,4.700312684391E-15)); +#3737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3738 = PCURVE('',#3739,#3744); +#3739 = PLANE('',#3740); +#3740 = AXIS2_PLACEMENT_3D('',#3741,#3742,#3743); +#3741 = CARTESIAN_POINT('',(-0.2405929494,100.97140847692, + -21.83526644707)); +#3742 = DIRECTION('',(-6.906312354635E-17,-3.602940798575E-17,1.)); +#3743 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798575E-17)); +#3744 = DEFINITIONAL_REPRESENTATION('',(#3745),#3753); +#3745 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3746,#3747,#3748,#3749, +#3750,#3751,#3752),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#3746 = CARTESIAN_POINT('',(6.550136941277,-8.854927407206E-05)); +#3747 = CARTESIAN_POINT('',(6.550136941277,-3.810469546215)); +#3748 = CARTESIAN_POINT('',(3.250250199829,-1.905279047744)); +#3749 = CARTESIAN_POINT('',(-4.963654161952E-02,-8.854927407369E-05)); +#3750 = CARTESIAN_POINT('',(3.250250199829,1.905101949196)); +#3751 = CARTESIAN_POINT('',(6.550136941277,3.810292447667)); +#3752 = CARTESIAN_POINT('',(6.550136941277,-8.854927407206E-05)); +#3753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3754 = ORIENTED_EDGE('',*,*,#3755,.F.); +#3755 = EDGE_CURVE('',#1277,#3723,#3756,.T.); +#3756 = SURFACE_CURVE('',#3757,(#3762,#3769),.PCURVE_S1.); +#3757 = CIRCLE('',#3758,2.199924494299); +#3758 = AXIS2_PLACEMENT_3D('',#3759,#3760,#3761); +#3759 = CARTESIAN_POINT('',(-0.240504400126,105.3216209239, + -21.83519094137)); +#3760 = DIRECTION('',(2.018656599356E-15,4.037313198712E-15,-1.)); +#3761 = DIRECTION('',(-6.00865753402E-15,1.,4.037313198712E-15)); +#3762 = PCURVE('',#1292,#3763); +#3763 = DEFINITIONAL_REPRESENTATION('',(#3764),#3768); +#3764 = LINE('',#3765,#3766); +#3765 = CARTESIAN_POINT('',(-1.570796326795,0.603462247149)); +#3766 = VECTOR('',#3767,1.); +#3767 = DIRECTION('',(1.,3.003671408924E-15)); +#3768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3769 = PCURVE('',#1526,#3770); +#3770 = DEFINITIONAL_REPRESENTATION('',(#3771),#3779); +#3771 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3772,#3773,#3774,#3775, +#3776,#3777,#3778),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#3772 = CARTESIAN_POINT('',(6.550136941277,-8.854927407206E-05)); +#3773 = CARTESIAN_POINT('',(6.550136941277,-3.810469546215)); +#3774 = CARTESIAN_POINT('',(3.250250199829,-1.905279047744)); +#3775 = CARTESIAN_POINT('',(-4.963654161952E-02,-8.854927407369E-05)); +#3776 = CARTESIAN_POINT('',(3.250250199829,1.905101949196)); +#3777 = CARTESIAN_POINT('',(6.550136941277,3.810292447667)); +#3778 = CARTESIAN_POINT('',(6.550136941277,-8.854927407206E-05)); +#3779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3780 = ORIENTED_EDGE('',*,*,#1274,.F.); +#3781 = ADVANCED_FACE('',(#3782),#1342,.F.); +#3782 = FACE_BOUND('',#3783,.F.); +#3783 = EDGE_LOOP('',(#3784,#3785,#3809,#3830)); +#3784 = ORIENTED_EDGE('',*,*,#1326,.T.); +#3785 = ORIENTED_EDGE('',*,*,#3786,.F.); +#3786 = EDGE_CURVE('',#3787,#1327,#3789,.T.); +#3787 = VERTEX_POINT('',#3788); +#3788 = CARTESIAN_POINT('',(-0.240592800216,103.62162092618, + -19.83526644707)); +#3789 = SURFACE_CURVE('',#3790,(#3795,#3802),.PCURVE_S1.); +#3790 = CIRCLE('',#3791,1.7); +#3791 = AXIS2_PLACEMENT_3D('',#3792,#3793,#3794); +#3792 = CARTESIAN_POINT('',(-0.240504400126,105.3216209239, + -19.83526644707)); +#3793 = DIRECTION('',(-6.906312354633E-17,-3.60294079857E-17,1.)); +#3794 = DIRECTION('',(-5.844283390569E-15,1.,3.60294079857E-17)); +#3795 = PCURVE('',#1342,#3796); +#3796 = DEFINITIONAL_REPRESENTATION('',(#3797),#3801); +#3797 = LINE('',#3798,#3799); +#3798 = CARTESIAN_POINT('',(10.995574287564,-1.)); +#3799 = VECTOR('',#3800,1.); +#3800 = DIRECTION('',(-1.,6.784958709406E-15)); +#3801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3802 = PCURVE('',#1370,#3803); +#3803 = DEFINITIONAL_REPRESENTATION('',(#3804),#3808); +#3804 = CIRCLE('',#3805,1.7); +#3805 = AXIS2_PLACEMENT_2D('',#3806,#3807); +#3806 = CARTESIAN_POINT('',(4.350212446978,-8.854927381989E-05)); +#3807 = DIRECTION('',(1.,5.828670879206E-16)); +#3808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3809 = ORIENTED_EDGE('',*,*,#3810,.T.); +#3810 = EDGE_CURVE('',#3787,#3575,#3811,.T.); +#3811 = SURFACE_CURVE('',#3812,(#3816,#3823),.PCURVE_S1.); +#3812 = LINE('',#3813,#3814); +#3813 = CARTESIAN_POINT('',(-0.240592800216,103.6216209262, + -20.83526644707)); +#3814 = VECTOR('',#3815,1.); +#3815 = DIRECTION('',(1.152780867537E-15,5.701506641247E-15,-1.)); +#3816 = PCURVE('',#1342,#3817); +#3817 = DEFINITIONAL_REPRESENTATION('',(#3818),#3822); +#3818 = LINE('',#3819,#3820); +#3819 = CARTESIAN_POINT('',(7.854033634028,-1.06581410364E-14)); +#3820 = VECTOR('',#3821,1.); +#3821 = DIRECTION('',(0.,1.)); +#3822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3823 = PCURVE('',#2420,#3824); +#3824 = DEFINITIONAL_REPRESENTATION('',(#3825),#3829); +#3825 = LINE('',#3826,#3827); +#3826 = CARTESIAN_POINT('',(4.750000000001,2.650212449276)); +#3827 = VECTOR('',#3828,1.); +#3828 = DIRECTION('',(-1.,-1.7763568394E-14)); +#3829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3830 = ORIENTED_EDGE('',*,*,#3574,.T.); +#3831 = ADVANCED_FACE('',(#3832),#1370,.T.); +#3832 = FACE_BOUND('',#3833,.T.); +#3833 = EDGE_LOOP('',(#3834,#3835,#3836,#3859)); +#3834 = ORIENTED_EDGE('',*,*,#1354,.F.); +#3835 = ORIENTED_EDGE('',*,*,#3786,.F.); +#3836 = ORIENTED_EDGE('',*,*,#3837,.F.); +#3837 = EDGE_CURVE('',#3838,#3787,#3840,.T.); +#3838 = VERTEX_POINT('',#3839); +#3839 = CARTESIAN_POINT('',(-0.240592800216,102.62162092534, + -19.83526644707)); +#3840 = SURFACE_CURVE('',#3841,(#3845,#3852),.PCURVE_S1.); +#3841 = LINE('',#3842,#3843); +#3842 = CARTESIAN_POINT('',(-0.240592800216,103.14655897505, + -19.83526644707)); +#3843 = VECTOR('',#3844,1.); +#3844 = DIRECTION('',(-6.28663787695E-15,1.,7.205881598491E-17)); +#3845 = PCURVE('',#1370,#3846); +#3846 = DEFINITIONAL_REPRESENTATION('',(#3847),#3851); +#3847 = LINE('',#3848,#3849); +#3848 = CARTESIAN_POINT('',(2.175150498123,-1.491833714431E-07)); +#3849 = VECTOR('',#3850,1.); +#3850 = DIRECTION('',(1.,1.025221574301E-15)); +#3851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3852 = PCURVE('',#2420,#3853); +#3853 = DEFINITIONAL_REPRESENTATION('',(#3854),#3858); +#3854 = LINE('',#3855,#3856); +#3855 = CARTESIAN_POINT('',(5.750000000001,2.175150498122)); +#3856 = VECTOR('',#3857,1.); +#3857 = DIRECTION('',(-2.339301621926E-14,1.)); +#3858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3859 = ORIENTED_EDGE('',*,*,#3860,.F.); +#3860 = EDGE_CURVE('',#1355,#3838,#3861,.T.); +#3861 = SURFACE_CURVE('',#3862,(#3867,#3878),.PCURVE_S1.); +#3862 = CIRCLE('',#3863,2.7); +#3863 = AXIS2_PLACEMENT_3D('',#3864,#3865,#3866); +#3864 = CARTESIAN_POINT('',(-0.240504400127,105.3216209239, + -19.83526644707)); +#3865 = DIRECTION('',(1.381262471199E-16,7.205881598491E-17,-1.)); +#3866 = DIRECTION('',(1.,-2.4071331145E-29,1.381262471199E-16)); +#3867 = PCURVE('',#1370,#3868); +#3868 = DEFINITIONAL_REPRESENTATION('',(#3869),#3877); +#3869 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3870,#3871,#3872,#3873, +#3874,#3875,#3876),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#3870 = CARTESIAN_POINT('',(4.350212446972,-2.700088549273)); +#3871 = CARTESIAN_POINT('',(-0.326324733464,-2.700088549273)); +#3872 = CARTESIAN_POINT('',(2.011943856754,1.349911450727)); +#3873 = CARTESIAN_POINT('',(4.350212446972,5.399911450727)); +#3874 = CARTESIAN_POINT('',(6.68848103719,1.349911450727)); +#3875 = CARTESIAN_POINT('',(9.026749627408,-2.700088549273)); +#3876 = CARTESIAN_POINT('',(4.350212446972,-2.700088549273)); +#3877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3878 = PCURVE('',#1398,#3879); +#3879 = DEFINITIONAL_REPRESENTATION('',(#3880),#3884); +#3880 = LINE('',#3881,#3882); +#3881 = CARTESIAN_POINT('',(-6.28318530718,9.)); +#3882 = VECTOR('',#3883,1.); +#3883 = DIRECTION('',(1.,-1.130840316158E-15)); +#3884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3885 = ADVANCED_FACE('',(#3886),#1398,.F.); +#3886 = FACE_BOUND('',#3887,.F.); +#3887 = EDGE_LOOP('',(#3888,#3889,#3890,#3918)); +#3888 = ORIENTED_EDGE('',*,*,#3860,.F.); +#3889 = ORIENTED_EDGE('',*,*,#1382,.T.); +#3890 = ORIENTED_EDGE('',*,*,#3891,.T.); +#3891 = EDGE_CURVE('',#1383,#3892,#3894,.T.); +#3892 = VERTEX_POINT('',#3893); +#3893 = CARTESIAN_POINT('',(-0.240592800216,102.62162092534, + -9.735266447075)); +#3894 = SURFACE_CURVE('',#3895,(#3900,#3907),.PCURVE_S1.); +#3895 = CIRCLE('',#3896,2.7); +#3896 = AXIS2_PLACEMENT_3D('',#3897,#3898,#3899); +#3897 = CARTESIAN_POINT('',(-0.240504400127,105.3216209239, + -9.735266447075)); +#3898 = DIRECTION('',(1.381262471199E-16,7.205881598492E-17,-1.)); +#3899 = DIRECTION('',(1.,-2.406223293389E-29,1.381262471199E-16)); +#3900 = PCURVE('',#1398,#3901); +#3901 = DEFINITIONAL_REPRESENTATION('',(#3902),#3906); +#3902 = LINE('',#3903,#3904); +#3903 = CARTESIAN_POINT('',(-6.28318530718,-1.1)); +#3904 = VECTOR('',#3905,1.); +#3905 = DIRECTION('',(1.,-1.130840316158E-15)); +#3906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3907 = PCURVE('',#1426,#3908); +#3908 = DEFINITIONAL_REPRESENTATION('',(#3909),#3917); +#3909 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3910,#3911,#3912,#3913, +#3914,#3915,#3916),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#3910 = CARTESIAN_POINT('',(4.385405446977,0.349869450726)); +#3911 = CARTESIAN_POINT('',(-0.291131733459,0.349869450726)); +#3912 = CARTESIAN_POINT('',(2.047136856759,4.399869450726)); +#3913 = CARTESIAN_POINT('',(4.385405446977,8.449869450726)); +#3914 = CARTESIAN_POINT('',(6.723674037195,4.399869450726)); +#3915 = CARTESIAN_POINT('',(9.061942627413,0.349869450726)); +#3916 = CARTESIAN_POINT('',(4.385405446977,0.349869450726)); +#3917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3918 = ORIENTED_EDGE('',*,*,#3919,.T.); +#3919 = EDGE_CURVE('',#3892,#3838,#3920,.T.); +#3920 = SURFACE_CURVE('',#3921,(#3925,#3932),.PCURVE_S1.); +#3921 = LINE('',#3922,#3923); +#3922 = CARTESIAN_POINT('',(-0.240592800216,102.62162092534, + -10.83526644707)); +#3923 = VECTOR('',#3924,1.); +#3924 = DIRECTION('',(4.745329621804E-16,7.646979113944E-16,-1.)); +#3925 = PCURVE('',#1398,#3926); +#3926 = DEFINITIONAL_REPRESENTATION('',(#3927),#3931); +#3927 = LINE('',#3928,#3929); +#3928 = CARTESIAN_POINT('',(1.570829067569,-1.7763568394E-15)); +#3929 = VECTOR('',#3930,1.); +#3930 = DIRECTION('',(0.,1.)); +#3931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3932 = PCURVE('',#2420,#3933); +#3933 = DEFINITIONAL_REPRESENTATION('',(#3934),#3938); +#3934 = LINE('',#3935,#3936); +#3935 = CARTESIAN_POINT('',(14.750000000001,1.650212448418)); +#3936 = VECTOR('',#3937,1.); +#3937 = DIRECTION('',(-1.,-2.270037712386E-14)); +#3938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3939 = ADVANCED_FACE('',(#3940),#1426,.F.); +#3940 = FACE_BOUND('',#3941,.T.); +#3941 = EDGE_LOOP('',(#3942,#3966,#3967,#3968)); +#3942 = ORIENTED_EDGE('',*,*,#3943,.T.); +#3943 = EDGE_CURVE('',#3944,#1411,#3946,.T.); +#3944 = VERTEX_POINT('',#3945); +#3945 = CARTESIAN_POINT('',(-0.240592800217,103.8216209265, + -9.735266447075)); +#3946 = SURFACE_CURVE('',#3947,(#3952,#3959),.PCURVE_S1.); +#3947 = CIRCLE('',#3948,1.5); +#3948 = AXIS2_PLACEMENT_3D('',#3949,#3950,#3951); +#3949 = CARTESIAN_POINT('',(-0.240504400127,105.3216209239, + -9.735266447075)); +#3950 = DIRECTION('',(-6.906312355993E-17,-3.602940798566E-17,1.)); +#3951 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798566E-17)); +#3952 = PCURVE('',#1426,#3953); +#3953 = DEFINITIONAL_REPRESENTATION('',(#3954),#3958); +#3954 = CIRCLE('',#3955,1.5); +#3955 = AXIS2_PLACEMENT_2D('',#3956,#3957); +#3956 = CARTESIAN_POINT('',(4.385405446977,3.049869450726)); +#3957 = DIRECTION('',(1.,-9.468819166108E-30)); +#3958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3959 = PCURVE('',#1454,#3960); +#3960 = DEFINITIONAL_REPRESENTATION('',(#3961),#3965); +#3961 = LINE('',#3962,#3963); +#3962 = CARTESIAN_POINT('',(-4.712388980385,1.1)); +#3963 = VECTOR('',#3964,1.); +#3964 = DIRECTION('',(1.,0.)); +#3965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3966 = ORIENTED_EDGE('',*,*,#1410,.F.); +#3967 = ORIENTED_EDGE('',*,*,#3891,.T.); +#3968 = ORIENTED_EDGE('',*,*,#3969,.F.); +#3969 = EDGE_CURVE('',#3944,#3892,#3970,.T.); +#3970 = SURFACE_CURVE('',#3971,(#3975,#3982),.PCURVE_S1.); +#3971 = LINE('',#3972,#3973); +#3972 = CARTESIAN_POINT('',(-0.240592800216,103.14655897505, + -9.735266447075)); +#3973 = VECTOR('',#3974,1.); +#3974 = DIRECTION('',(6.28663787695E-15,-1.,-7.205881598492E-17)); +#3975 = PCURVE('',#1426,#3976); +#3976 = DEFINITIONAL_REPRESENTATION('',(#3977),#3981); +#3977 = LINE('',#3978,#3979); +#3978 = CARTESIAN_POINT('',(2.210343498128,3.049957850815)); +#3979 = VECTOR('',#3980,1.); +#3980 = DIRECTION('',(-1.,-4.423544863809E-16)); +#3981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3982 = PCURVE('',#2420,#3983); +#3983 = DEFINITIONAL_REPRESENTATION('',(#3984),#3988); +#3984 = LINE('',#3985,#3986); +#3985 = CARTESIAN_POINT('',(15.850000000001,2.175150498122)); +#3986 = VECTOR('',#3987,1.); +#3987 = DIRECTION('',(2.339301621926E-14,-1.)); +#3988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3989 = ADVANCED_FACE('',(#3990),#1454,.F.); +#3990 = FACE_BOUND('',#3991,.F.); +#3991 = EDGE_LOOP('',(#3992,#3993,#3994,#4015)); +#3992 = ORIENTED_EDGE('',*,*,#1438,.T.); +#3993 = ORIENTED_EDGE('',*,*,#2376,.T.); +#3994 = ORIENTED_EDGE('',*,*,#3995,.F.); +#3995 = EDGE_CURVE('',#3944,#2377,#3996,.T.); +#3996 = SURFACE_CURVE('',#3997,(#4001,#4008),.PCURVE_S1.); +#3997 = LINE('',#3998,#3999); +#3998 = CARTESIAN_POINT('',(-0.240592800217,103.8216209265, + -10.83526644707)); +#3999 = VECTOR('',#4000,1.); +#4000 = DIRECTION('',(-6.938893903907E-17,-1.262177448354E-29,1.)); +#4001 = PCURVE('',#1454,#4002); +#4002 = DEFINITIONAL_REPRESENTATION('',(#4003),#4007); +#4003 = LINE('',#4004,#4005); +#4004 = CARTESIAN_POINT('',(-1.570855260188,0.)); +#4005 = VECTOR('',#4006,1.); +#4006 = DIRECTION('',(0.,1.)); +#4007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4008 = PCURVE('',#2420,#4009); +#4009 = DEFINITIONAL_REPRESENTATION('',(#4010),#4014); +#4010 = LINE('',#4011,#4012); +#4011 = CARTESIAN_POINT('',(14.75,2.850212449576)); +#4012 = VECTOR('',#4013,1.); +#4013 = DIRECTION('',(1.,2.346507503525E-14)); +#4014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4015 = ORIENTED_EDGE('',*,*,#3943,.T.); +#4016 = ADVANCED_FACE('',(#4017),#1526,.F.); +#4017 = FACE_BOUND('',#4018,.T.); +#4018 = EDGE_LOOP('',(#4019,#4020,#4021,#4022,#4023)); +#4019 = ORIENTED_EDGE('',*,*,#3755,.F.); +#4020 = ORIENTED_EDGE('',*,*,#1512,.F.); +#4021 = ORIENTED_EDGE('',*,*,#1542,.F.); +#4022 = ORIENTED_EDGE('',*,*,#1692,.T.); +#4023 = ORIENTED_EDGE('',*,*,#4024,.F.); +#4024 = EDGE_CURVE('',#3723,#1665,#4025,.T.); +#4025 = SURFACE_CURVE('',#4026,(#4030,#4037),.PCURVE_S1.); +#4026 = LINE('',#4027,#4028); +#4027 = CARTESIAN_POINT('',(1.959499999963,87.785704238464, + -21.83526644707)); +#4028 = VECTOR('',#4029,1.); +#4029 = DIRECTION('',(-1.075461904416E-27,1.,3.602940798575E-17)); +#4030 = PCURVE('',#1526,#4031); +#4031 = DEFINITIONAL_REPRESENTATION('',(#4032),#4036); +#4032 = LINE('',#4033,#4034); +#4033 = CARTESIAN_POINT('',(-13.18570423846,-2.200092949363)); +#4034 = VECTOR('',#4035,1.); +#4035 = DIRECTION('',(1.,-5.844283390568E-15)); +#4036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4037 = PCURVE('',#1680,#4038); +#4038 = DEFINITIONAL_REPRESENTATION('',(#4039),#4043); +#4039 = LINE('',#4040,#4041); +#4040 = CARTESIAN_POINT('',(13.185704238464,-15.44499999999)); +#4041 = VECTOR('',#4042,1.); +#4042 = DIRECTION('',(1.,-5.911543184848E-15)); +#4043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4044 = ADVANCED_FACE('',(#4045,#4268),#1680,.F.); +#4045 = FACE_BOUND('',#4046,.T.); +#4046 = EDGE_LOOP('',(#4047,#4072,#4100,#4128,#4156,#4177,#4178,#4179, + #4200,#4201,#4202,#4203,#4226,#4247)); +#4047 = ORIENTED_EDGE('',*,*,#4048,.F.); +#4048 = EDGE_CURVE('',#4049,#4051,#4053,.T.); +#4049 = VERTEX_POINT('',#4050); +#4050 = CARTESIAN_POINT('',(1.959499999963,94.450626836872, + -21.83526644707)); +#4051 = VERTEX_POINT('',#4052); +#4052 = CARTESIAN_POINT('',(1.959499999963,94.450626836872, + -27.83509053063)); +#4053 = SURFACE_CURVE('',#4054,(#4058,#4065),.PCURVE_S1.); +#4054 = LINE('',#4055,#4056); +#4055 = CARTESIAN_POINT('',(1.959499999963,94.450626836871, + -10.83526644707)); +#4056 = VECTOR('',#4057,1.); +#4057 = DIRECTION('',(4.255784291194E-17,-9.59831506504E-16,-1.)); +#4058 = PCURVE('',#1680,#4059); +#4059 = DEFINITIONAL_REPRESENTATION('',(#4060),#4064); +#4060 = LINE('',#4061,#4062); +#4061 = CARTESIAN_POINT('',(19.850626836871,-4.444999999999)); +#4062 = VECTOR('',#4063,1.); +#4063 = DIRECTION('',(-6.907404099338E-15,-1.)); +#4064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4065 = PCURVE('',#2561,#4066); +#4066 = DEFINITIONAL_REPRESENTATION('',(#4067),#4071); +#4067 = LINE('',#4068,#4069); +#4068 = CARTESIAN_POINT('',(-0.733881271579,1.7763568394E-15)); +#4069 = VECTOR('',#4070,1.); +#4070 = DIRECTION('',(0.,1.)); +#4071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4072 = ORIENTED_EDGE('',*,*,#4073,.T.); +#4073 = EDGE_CURVE('',#4049,#4074,#4076,.T.); +#4074 = VERTEX_POINT('',#4075); +#4075 = CARTESIAN_POINT('',(1.959420094173,96.621196029952, + -21.83519094137)); +#4076 = SURFACE_CURVE('',#4077,(#4081,#4088),.PCURVE_S1.); +#4077 = LINE('',#4078,#4079); +#4078 = CARTESIAN_POINT('',(1.959499999963,87.785704238464, + -21.83526644707)); +#4079 = VECTOR('',#4080,1.); +#4080 = DIRECTION('',(-1.075461904416E-27,1.,3.602940798575E-17)); +#4081 = PCURVE('',#1680,#4082); +#4082 = DEFINITIONAL_REPRESENTATION('',(#4083),#4087); +#4083 = LINE('',#4084,#4085); +#4084 = CARTESIAN_POINT('',(13.185704238464,-15.44499999999)); +#4085 = VECTOR('',#4086,1.); +#4086 = DIRECTION('',(1.,-5.911543184848E-15)); +#4087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4088 = PCURVE('',#4089,#4094); +#4089 = PLANE('',#4090); +#4090 = AXIS2_PLACEMENT_3D('',#4091,#4092,#4093); +#4091 = CARTESIAN_POINT('',(-0.2405929494,100.97140847692, + -21.83526644707)); +#4092 = DIRECTION('',(-6.906312354635E-17,-3.602940798575E-17,1.)); +#4093 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798575E-17)); +#4094 = DEFINITIONAL_REPRESENTATION('',(#4095),#4099); +#4095 = LINE('',#4096,#4097); +#4096 = CARTESIAN_POINT('',(-13.18570423846,-2.200092949363)); +#4097 = VECTOR('',#4098,1.); +#4098 = DIRECTION('',(1.,-5.844283390568E-15)); +#4099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4100 = ORIENTED_EDGE('',*,*,#4101,.T.); +#4101 = EDGE_CURVE('',#4074,#4102,#4104,.T.); +#4102 = VERTEX_POINT('',#4103); +#4103 = CARTESIAN_POINT('',(1.959499999963,97.507306861793, + -21.83526644707)); +#4104 = SURFACE_CURVE('',#4105,(#4109,#4116),.PCURVE_S1.); +#4105 = LINE('',#4106,#4107); +#4106 = CARTESIAN_POINT('',(1.959499999963,87.785704238464, + -21.83526644707)); +#4107 = VECTOR('',#4108,1.); +#4108 = DIRECTION('',(-1.075461904416E-27,1.,3.602940798575E-17)); +#4109 = PCURVE('',#1680,#4110); +#4110 = DEFINITIONAL_REPRESENTATION('',(#4111),#4115); +#4111 = LINE('',#4112,#4113); +#4112 = CARTESIAN_POINT('',(13.185704238464,-15.44499999999)); +#4113 = VECTOR('',#4114,1.); +#4114 = DIRECTION('',(1.,-5.911543184848E-15)); +#4115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4116 = PCURVE('',#4117,#4122); +#4117 = PLANE('',#4118); +#4118 = AXIS2_PLACEMENT_3D('',#4119,#4120,#4121); +#4119 = CARTESIAN_POINT('',(-0.2405929494,100.97140847692, + -21.83526644707)); +#4120 = DIRECTION('',(-6.906312354635E-17,-3.602940798575E-17,1.)); +#4121 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798575E-17)); +#4122 = DEFINITIONAL_REPRESENTATION('',(#4123),#4127); +#4123 = LINE('',#4124,#4125); +#4124 = CARTESIAN_POINT('',(-13.18570423846,-2.200092949363)); +#4125 = VECTOR('',#4126,1.); +#4126 = DIRECTION('',(1.,-5.844283390568E-15)); +#4127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4128 = ORIENTED_EDGE('',*,*,#4129,.T.); +#4129 = EDGE_CURVE('',#4102,#4130,#4132,.T.); +#4130 = VERTEX_POINT('',#4131); +#4131 = CARTESIAN_POINT('',(1.959499999963,104.43551009206, + -21.83526644707)); +#4132 = SURFACE_CURVE('',#4133,(#4138,#4149),.PCURVE_S1.); +#4133 = CIRCLE('',#4134,6.5); +#4134 = AXIS2_PLACEMENT_3D('',#4135,#4136,#4137); +#4135 = CARTESIAN_POINT('',(1.959499999963,100.97140847692, + -27.33526644707)); +#4136 = DIRECTION('',(-1.,5.828670879206E-16,1.439671152028E-29)); +#4137 = DIRECTION('',(-5.828670879206E-16,-1.,-2.346507503525E-14)); +#4138 = PCURVE('',#1680,#4139); +#4139 = DEFINITIONAL_REPRESENTATION('',(#4140),#4148); +#4140 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4141,#4142,#4143,#4144, +#4145,#4146,#4147),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#4141 = CARTESIAN_POINT('',(19.871408476929,-20.945)); +#4142 = CARTESIAN_POINT('',(19.871408476929,-9.686669750802)); +#4143 = CARTESIAN_POINT('',(29.621408476929,-15.3158348754)); +#4144 = CARTESIAN_POINT('',(39.371408476929,-20.945)); +#4145 = CARTESIAN_POINT('',(29.621408476929,-26.57416512459)); +#4146 = CARTESIAN_POINT('',(19.871408476929,-32.20333024919)); +#4147 = CARTESIAN_POINT('',(19.871408476929,-20.945)); +#4148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4149 = PCURVE('',#3688,#4150); +#4150 = DEFINITIONAL_REPRESENTATION('',(#4151),#4155); +#4151 = LINE('',#4152,#4153); +#4152 = CARTESIAN_POINT('',(2.22044604925E-16,-1.474972770766E-15)); +#4153 = VECTOR('',#4154,1.); +#4154 = DIRECTION('',(1.,-3.160384759868E-15)); +#4155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4156 = ORIENTED_EDGE('',*,*,#4157,.T.); +#4157 = EDGE_CURVE('',#4130,#3723,#4158,.T.); +#4158 = SURFACE_CURVE('',#4159,(#4163,#4170),.PCURVE_S1.); +#4159 = LINE('',#4160,#4161); +#4160 = CARTESIAN_POINT('',(1.959499999963,87.785704238464, + -21.83526644707)); +#4161 = VECTOR('',#4162,1.); +#4162 = DIRECTION('',(-1.075461904416E-27,1.,3.602940798575E-17)); +#4163 = PCURVE('',#1680,#4164); +#4164 = DEFINITIONAL_REPRESENTATION('',(#4165),#4169); +#4165 = LINE('',#4166,#4167); +#4166 = CARTESIAN_POINT('',(13.185704238464,-15.44499999999)); +#4167 = VECTOR('',#4168,1.); +#4168 = DIRECTION('',(1.,-5.911543184848E-15)); +#4169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4170 = PCURVE('',#3739,#4171); +#4171 = DEFINITIONAL_REPRESENTATION('',(#4172),#4176); +#4172 = LINE('',#4173,#4174); +#4173 = CARTESIAN_POINT('',(-13.18570423846,-2.200092949363)); +#4174 = VECTOR('',#4175,1.); +#4175 = DIRECTION('',(1.,-5.844283390568E-15)); +#4176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4177 = ORIENTED_EDGE('',*,*,#4024,.T.); +#4178 = ORIENTED_EDGE('',*,*,#1664,.F.); +#4179 = ORIENTED_EDGE('',*,*,#4180,.F.); +#4180 = EDGE_CURVE('',#3129,#1637,#4181,.T.); +#4181 = SURFACE_CURVE('',#4182,(#4186,#4193),.PCURVE_S1.); +#4182 = LINE('',#4183,#4184); +#4183 = CARTESIAN_POINT('',(1.959499999963,105.93621550726, + -34.83526644707)); +#4184 = VECTOR('',#4185,1.); +#4185 = DIRECTION('',(4.189442810385E-15,1.,1.037348846429E-13)); +#4186 = PCURVE('',#1680,#4187); +#4187 = DEFINITIONAL_REPRESENTATION('',(#4188),#4192); +#4188 = LINE('',#4189,#4190); +#4189 = CARTESIAN_POINT('',(31.336215507268,-28.445)); +#4190 = VECTOR('',#4191,1.); +#4191 = DIRECTION('',(1.,9.778731205005E-14)); +#4192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4193 = PCURVE('',#1652,#4194); +#4194 = DEFINITIONAL_REPRESENTATION('',(#4195),#4199); +#4195 = LINE('',#4196,#4197); +#4196 = CARTESIAN_POINT('',(6.895224307042,6.400008800569)); +#4197 = VECTOR('',#4198,1.); +#4198 = DIRECTION('',(-1.,-5.641303007591E-11)); +#4199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4200 = ORIENTED_EDGE('',*,*,#3128,.F.); +#4201 = ORIENTED_EDGE('',*,*,#3100,.F.); +#4202 = ORIENTED_EDGE('',*,*,#3026,.F.); +#4203 = ORIENTED_EDGE('',*,*,#4204,.F.); +#4204 = EDGE_CURVE('',#4205,#3004,#4207,.T.); +#4205 = VERTEX_POINT('',#4206); +#4206 = CARTESIAN_POINT('',(1.959499999963,94.436215507268, + -34.83526644707)); +#4207 = SURFACE_CURVE('',#4208,(#4212,#4219),.PCURVE_S1.); +#4208 = LINE('',#4209,#4210); +#4209 = CARTESIAN_POINT('',(1.959499999963,93.715719907335, + -34.83526644707)); +#4210 = VECTOR('',#4211,1.); +#4211 = DIRECTION('',(-7.054219284889E-28,1.,-5.9135856969E-14)); +#4212 = PCURVE('',#1680,#4213); +#4213 = DEFINITIONAL_REPRESENTATION('',(#4214),#4218); +#4214 = LINE('',#4215,#4216); +#4215 = CARTESIAN_POINT('',(19.115719907334,-28.445)); +#4216 = VECTOR('',#4217,1.); +#4217 = DIRECTION('',(1.,-6.508342956183E-14)); +#4218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4219 = PCURVE('',#2216,#4220); +#4220 = DEFINITIONAL_REPRESENTATION('',(#4221),#4225); +#4221 = LINE('',#4222,#4223); +#4222 = CARTESIAN_POINT('',(19.115719906975,6.400008801258)); +#4223 = VECTOR('',#4224,1.); +#4224 = DIRECTION('',(-1.,-5.641721951872E-11)); +#4225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4226 = ORIENTED_EDGE('',*,*,#4227,.T.); +#4227 = EDGE_CURVE('',#4205,#2596,#4228,.T.); +#4228 = SURFACE_CURVE('',#4229,(#4233,#4240),.PCURVE_S1.); +#4229 = LINE('',#4230,#4231); +#4230 = CARTESIAN_POINT('',(1.959499999964,94.436215507268, + -34.83509053063)); +#4231 = VECTOR('',#4232,1.); +#4232 = DIRECTION('',(-1.152780867536E-15,-1.040843469773E-13,1.)); +#4233 = PCURVE('',#1680,#4234); +#4234 = DEFINITIONAL_REPRESENTATION('',(#4235),#4239); +#4235 = LINE('',#4236,#4237); +#4236 = CARTESIAN_POINT('',(19.836215507268,-28.44482408356)); +#4237 = VECTOR('',#4238,1.); +#4238 = DIRECTION('',(-9.813677438443E-14,1.)); +#4239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4240 = PCURVE('',#2188,#4241); +#4241 = DEFINITIONAL_REPRESENTATION('',(#4242),#4246); +#4242 = LINE('',#4243,#4244); +#4243 = CARTESIAN_POINT('',(5.5,-8.300008800374)); +#4244 = VECTOR('',#4245,1.); +#4245 = DIRECTION('',(1.,1.183291357832E-30)); +#4246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4247 = ORIENTED_EDGE('',*,*,#4248,.F.); +#4248 = EDGE_CURVE('',#4051,#2596,#4249,.T.); +#4249 = SURFACE_CURVE('',#4250,(#4254,#4261),.PCURVE_S1.); +#4250 = LINE('',#4251,#4252); +#4251 = CARTESIAN_POINT('',(1.959499999963,85.268107753634, + -27.83509053063)); +#4252 = VECTOR('',#4253,1.); +#4253 = DIRECTION('',(1.108958567907E-27,-1.,-5.392371681819E-15)); +#4254 = PCURVE('',#1680,#4255); +#4255 = DEFINITIONAL_REPRESENTATION('',(#4256),#4260); +#4256 = LINE('',#4257,#4258); +#4257 = CARTESIAN_POINT('',(10.668107753634,-21.44482408356)); +#4258 = VECTOR('',#4259,1.); +#4259 = DIRECTION('',(-1.,5.552009110152E-16)); +#4260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4261 = PCURVE('',#2611,#4262); +#4262 = DEFINITIONAL_REPRESENTATION('',(#4263),#4267); +#4263 = LINE('',#4264,#4265); +#4264 = CARTESIAN_POINT('',(10.668107753634,8.300008800257)); +#4265 = VECTOR('',#4266,1.); +#4266 = DIRECTION('',(1.,5.05151476203E-15)); +#4267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4268 = FACE_BOUND('',#4269,.T.); +#4269 = EDGE_LOOP('',(#4270)); +#4270 = ORIENTED_EDGE('',*,*,#4271,.T.); +#4271 = EDGE_CURVE('',#4272,#4272,#4274,.T.); +#4272 = VERTEX_POINT('',#4273); +#4273 = CARTESIAN_POINT('',(1.959499999963,100.97140847692, + -25.83526644707)); +#4274 = SURFACE_CURVE('',#4275,(#4280,#4287),.PCURVE_S1.); +#4275 = CIRCLE('',#4276,1.5); +#4276 = AXIS2_PLACEMENT_3D('',#4277,#4278,#4279); +#4277 = CARTESIAN_POINT('',(1.959499999963,100.97140847692, + -27.33526644707)); +#4278 = DIRECTION('',(1.,1.075236589286E-27,6.253645076815E-15)); +#4279 = DIRECTION('',(6.253645076815E-15,2.344686043875E-14,-1.)); +#4280 = PCURVE('',#1680,#4281); +#4281 = DEFINITIONAL_REPRESENTATION('',(#4282),#4286); +#4282 = CIRCLE('',#4283,1.5); +#4283 = AXIS2_PLACEMENT_2D('',#4284,#4285); +#4284 = CARTESIAN_POINT('',(26.371408476929,-20.945)); +#4285 = DIRECTION('',(1.749928784592E-14,-1.)); +#4286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4287 = PCURVE('',#4288,#4293); +#4288 = CYLINDRICAL_SURFACE('',#4289,1.5); +#4289 = AXIS2_PLACEMENT_3D('',#4290,#4291,#4292); +#4290 = CARTESIAN_POINT('',(0.959322901415,100.97140847692, + -27.33526644707)); +#4291 = DIRECTION('',(-1.,-5.134781489213E-16,4.660627617663E-16)); +#4292 = DIRECTION('',(-4.660627617663E-16,2.344686043875E-14,-1.)); +#4293 = DEFINITIONAL_REPRESENTATION('',(#4294),#4298); +#4294 = LINE('',#4295,#4296); +#4295 = CARTESIAN_POINT('',(6.28318530718,-1.000177098547)); +#4296 = VECTOR('',#4297,1.); +#4297 = DIRECTION('',(-1.,0.)); +#4298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4299 = ADVANCED_FACE('',(#4300),#1652,.T.); +#4300 = FACE_BOUND('',#4301,.T.); +#4301 = EDGE_LOOP('',(#4302,#4303,#4304,#4305)); +#4302 = ORIENTED_EDGE('',*,*,#2297,.F.); +#4303 = ORIENTED_EDGE('',*,*,#3151,.F.); +#4304 = ORIENTED_EDGE('',*,*,#4180,.T.); +#4305 = ORIENTED_EDGE('',*,*,#1636,.F.); +#4306 = ADVANCED_FACE('',(#4307),#1881,.F.); +#4307 = FACE_BOUND('',#4308,.F.); +#4308 = EDGE_LOOP('',(#4309,#4332,#4354,#4355)); +#4309 = ORIENTED_EDGE('',*,*,#4310,.T.); +#4310 = EDGE_CURVE('',#1865,#4311,#4313,.T.); +#4311 = VERTEX_POINT('',#4312); +#4312 = CARTESIAN_POINT('',(5.0593,113.6862,-29.3351)); +#4313 = SEAM_CURVE('',#4314,(#4318,#4325),.PCURVE_S1.); +#4314 = LINE('',#4315,#4316); +#4315 = CARTESIAN_POINT('',(2.0093,113.6862,-29.3351)); +#4316 = VECTOR('',#4317,1.); +#4317 = DIRECTION('',(1.,0.,0.)); +#4318 = PCURVE('',#1881,#4319); +#4319 = DEFINITIONAL_REPRESENTATION('',(#4320),#4324); +#4320 = LINE('',#4321,#4322); +#4321 = CARTESIAN_POINT('',(6.28318530718,-0.)); +#4322 = VECTOR('',#4323,1.); +#4323 = DIRECTION('',(0.,1.)); +#4324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4325 = PCURVE('',#1881,#4326); +#4326 = DEFINITIONAL_REPRESENTATION('',(#4327),#4331); +#4327 = LINE('',#4328,#4329); +#4328 = CARTESIAN_POINT('',(0.,-0.)); +#4329 = VECTOR('',#4330,1.); +#4330 = DIRECTION('',(0.,1.)); +#4331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4332 = ORIENTED_EDGE('',*,*,#4333,.F.); +#4333 = EDGE_CURVE('',#4311,#4311,#4334,.T.); +#4334 = SURFACE_CURVE('',#4335,(#4340,#4347),.PCURVE_S1.); +#4335 = CIRCLE('',#4336,4.5); +#4336 = AXIS2_PLACEMENT_3D('',#4337,#4338,#4339); +#4337 = CARTESIAN_POINT('',(5.0593,113.6862,-33.8351)); +#4338 = DIRECTION('',(1.,0.,0.)); +#4339 = DIRECTION('',(-0.,0.,1.)); +#4340 = PCURVE('',#1881,#4341); +#4341 = DEFINITIONAL_REPRESENTATION('',(#4342),#4346); +#4342 = LINE('',#4343,#4344); +#4343 = CARTESIAN_POINT('',(0.,3.05)); +#4344 = VECTOR('',#4345,1.); +#4345 = DIRECTION('',(1.,0.)); +#4346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4347 = PCURVE('',#2078,#4348); +#4348 = DEFINITIONAL_REPRESENTATION('',(#4349),#4353); +#4349 = CIRCLE('',#4350,4.5); +#4350 = AXIS2_PLACEMENT_2D('',#4351,#4352); +#4351 = CARTESIAN_POINT('',(0.,0.)); +#4352 = DIRECTION('',(1.,0.)); +#4353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4354 = ORIENTED_EDGE('',*,*,#4310,.F.); +#4355 = ORIENTED_EDGE('',*,*,#1864,.T.); +#4356 = ADVANCED_FACE('',(#4357,#4360),#2078,.F.); +#4357 = FACE_BOUND('',#4358,.F.); +#4358 = EDGE_LOOP('',(#4359)); +#4359 = ORIENTED_EDGE('',*,*,#4333,.T.); +#4360 = FACE_BOUND('',#4361,.F.); +#4361 = EDGE_LOOP('',(#4362)); +#4362 = ORIENTED_EDGE('',*,*,#2063,.F.); +#4363 = ADVANCED_FACE('',(#4364),#2188,.T.); +#4364 = FACE_BOUND('',#4365,.T.); +#4365 = EDGE_LOOP('',(#4366,#4386,#4387,#4388,#4409,#4410)); +#4366 = ORIENTED_EDGE('',*,*,#4367,.T.); +#4367 = EDGE_CURVE('',#2800,#2624,#4368,.T.); +#4368 = SURFACE_CURVE('',#4369,(#4373,#4379),.PCURVE_S1.); +#4369 = LINE('',#4370,#4371); +#4370 = CARTESIAN_POINT('',(2.2593,94.436215507268,-40.33509526531)); +#4371 = VECTOR('',#4372,1.); +#4372 = DIRECTION('',(0.,-2.346507503525E-14,1.)); +#4373 = PCURVE('',#2188,#4374); +#4374 = DEFINITIONAL_REPRESENTATION('',(#4375),#4378); +#4375 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4376,#4377),.UNSPECIFIED.,.F., + .F.,(2,2),(5.000004734681,12.500004734681),.PIECEWISE_BEZIER_KNOTS.); +#4376 = CARTESIAN_POINT('',(4.999999999999,-8.59980880041)); +#4377 = CARTESIAN_POINT('',(12.5,-8.59980880041)); +#4378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4379 = PCURVE('',#2661,#4380); +#4380 = DEFINITIONAL_REPRESENTATION('',(#4381),#4385); +#4381 = LINE('',#4382,#4383); +#4382 = CARTESIAN_POINT('',(4.734681823493E-06,-1.686215507268)); +#4383 = VECTOR('',#4384,1.); +#4384 = DIRECTION('',(1.,2.346507503525E-14)); +#4385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4386 = ORIENTED_EDGE('',*,*,#2623,.T.); +#4387 = ORIENTED_EDGE('',*,*,#4227,.F.); +#4388 = ORIENTED_EDGE('',*,*,#4389,.T.); +#4389 = EDGE_CURVE('',#4205,#2173,#4390,.T.); +#4390 = SURFACE_CURVE('',#4391,(#4395,#4402),.PCURVE_S1.); +#4391 = LINE('',#4392,#4393); +#4392 = CARTESIAN_POINT('',(-5.390508800313,94.436215507268, + -34.83526644707)); +#4393 = VECTOR('',#4394,1.); +#4394 = DIRECTION('',(-1.,2.736459563192E-15,1.47053451828E-14)); +#4395 = PCURVE('',#2188,#4396); +#4396 = DEFINITIONAL_REPRESENTATION('',(#4397),#4401); +#4397 = LINE('',#4398,#4399); +#4398 = CARTESIAN_POINT('',(5.49982408356,-0.950000000097)); +#4399 = VECTOR('',#4400,1.); +#4400 = DIRECTION('',(1.585812605033E-14,1.)); +#4401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4402 = PCURVE('',#2216,#4403); +#4403 = DEFINITIONAL_REPRESENTATION('',(#4404),#4408); +#4404 = LINE('',#4405,#4406); +#4405 = CARTESIAN_POINT('',(18.395224307457,-0.949999999059)); +#4406 = VECTOR('',#4407,1.); +#4407 = DIRECTION('',(5.641448305916E-11,-1.)); +#4408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4409 = ORIENTED_EDGE('',*,*,#2172,.T.); +#4410 = ORIENTED_EDGE('',*,*,#2799,.T.); +#4411 = ADVANCED_FACE('',(#4412),#2216,.T.); +#4412 = FACE_BOUND('',#4413,.T.); +#4413 = EDGE_LOOP('',(#4414,#4415,#4416,#4417)); +#4414 = ORIENTED_EDGE('',*,*,#2200,.F.); +#4415 = ORIENTED_EDGE('',*,*,#4389,.F.); +#4416 = ORIENTED_EDGE('',*,*,#4204,.T.); +#4417 = ORIENTED_EDGE('',*,*,#3003,.F.); +#4418 = ADVANCED_FACE('',(#4419),#2340,.T.); +#4419 = FACE_BOUND('',#4420,.T.); +#4420 = EDGE_LOOP('',(#4421,#4446,#4467,#4468,#4469,#4470,#4493,#4521, + #4549,#4577,#4605)); +#4421 = ORIENTED_EDGE('',*,*,#4422,.T.); +#4422 = EDGE_CURVE('',#4423,#4425,#4427,.T.); +#4423 = VERTEX_POINT('',#4424); +#4424 = CARTESIAN_POINT('',(-0.240592800216,94.421271537429, + -21.83519094137)); +#4425 = VERTEX_POINT('',#4426); +#4426 = CARTESIAN_POINT('',(-0.240592800216,92.466453031707, + -21.83526644707)); +#4427 = SURFACE_CURVE('',#4428,(#4432,#4439),.PCURVE_S1.); +#4428 = LINE('',#4429,#4430); +#4429 = CARTESIAN_POINT('',(-0.240592800216,100.97140847692, + -21.83526644707)); +#4430 = VECTOR('',#4431,1.); +#4431 = DIRECTION('',(6.28663787695E-15,-1.,-3.602940798575E-17)); +#4432 = PCURVE('',#2340,#4433); +#4433 = DEFINITIONAL_REPRESENTATION('',(#4434),#4438); +#4434 = LINE('',#4435,#4436); +#4435 = CARTESIAN_POINT('',(3.75,8.799403138219E-14)); +#4436 = VECTOR('',#4437,1.); +#4437 = DIRECTION('',(2.342904562726E-14,-1.)); +#4438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4439 = PCURVE('',#4089,#4440); +#4440 = DEFINITIONAL_REPRESENTATION('',(#4441),#4445); +#4441 = LINE('',#4442,#4443); +#4442 = CARTESIAN_POINT('',(9.947598291923E-13,-1.491836200129E-07)); +#4443 = VECTOR('',#4444,1.); +#4444 = DIRECTION('',(-1.,-4.423544863809E-16)); +#4445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4446 = ORIENTED_EDGE('',*,*,#4447,.F.); +#4447 = EDGE_CURVE('',#2518,#4425,#4448,.T.); +#4448 = SURFACE_CURVE('',#4449,(#4453,#4460),.PCURVE_S1.); +#4449 = LINE('',#4450,#4451); +#4450 = CARTESIAN_POINT('',(-0.240592800216,92.466453031719, + -10.83526644707)); +#4451 = VECTOR('',#4452,1.); +#4452 = DIRECTION('',(-4.255784291194E-17,9.59831506504E-16,1.)); +#4453 = PCURVE('',#2340,#4454); +#4454 = DEFINITIONAL_REPRESENTATION('',(#4455),#4459); +#4455 = LINE('',#4456,#4457); +#4456 = CARTESIAN_POINT('',(14.750000000001,-8.50495544521)); +#4457 = VECTOR('',#4458,1.); +#4458 = DIRECTION('',(1.,2.442490654175E-14)); +#4459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4460 = PCURVE('',#2561,#4461); +#4461 = DEFINITIONAL_REPRESENTATION('',(#4462),#4466); +#4462 = LINE('',#4463,#4464); +#4463 = CARTESIAN_POINT('',(0.73388127158,1.7763568394E-15)); +#4464 = VECTOR('',#4465,1.); +#4465 = DIRECTION('',(0.,-1.)); +#4466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4467 = ORIENTED_EDGE('',*,*,#2517,.F.); +#4468 = ORIENTED_EDGE('',*,*,#2491,.T.); +#4469 = ORIENTED_EDGE('',*,*,#2322,.F.); +#4470 = ORIENTED_EDGE('',*,*,#4471,.F.); +#4471 = EDGE_CURVE('',#4472,#2323,#4474,.T.); +#4472 = VERTEX_POINT('',#4473); +#4473 = CARTESIAN_POINT('',(-0.240592800217,95.12119603255, + -9.735266447075)); +#4474 = SURFACE_CURVE('',#4475,(#4479,#4486),.PCURVE_S1.); +#4475 = LINE('',#4476,#4477); +#4476 = CARTESIAN_POINT('',(-0.240592800217,95.12119603255, + -10.83526644707)); +#4477 = VECTOR('',#4478,1.); +#4478 = DIRECTION('',(-6.938893903907E-17,-1.262177448354E-29,1.)); +#4479 = PCURVE('',#2340,#4480); +#4480 = DEFINITIONAL_REPRESENTATION('',(#4481),#4485); +#4481 = LINE('',#4482,#4483); +#4482 = CARTESIAN_POINT('',(14.750000000001,-5.850212444378)); +#4483 = VECTOR('',#4484,1.); +#4484 = DIRECTION('',(1.,2.346507503525E-14)); +#4485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4486 = PCURVE('',#2451,#4487); +#4487 = DEFINITIONAL_REPRESENTATION('',(#4488),#4492); +#4488 = LINE('',#4489,#4490); +#4489 = CARTESIAN_POINT('',(-1.570855260188,0.)); +#4490 = VECTOR('',#4491,1.); +#4491 = DIRECTION('',(0.,1.)); +#4492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4493 = ORIENTED_EDGE('',*,*,#4494,.T.); +#4494 = EDGE_CURVE('',#4472,#4495,#4497,.T.); +#4495 = VERTEX_POINT('',#4496); +#4496 = CARTESIAN_POINT('',(-0.240592800216,93.921196031393, + -9.735266447075)); +#4497 = SURFACE_CURVE('',#4498,(#4502,#4509),.PCURVE_S1.); +#4498 = LINE('',#4499,#4500); +#4499 = CARTESIAN_POINT('',(-0.240592800216,98.796346528074, + -9.735266447075)); +#4500 = VECTOR('',#4501,1.); +#4501 = DIRECTION('',(6.28663787695E-15,-1.,-7.205881598494E-17)); +#4502 = PCURVE('',#2340,#4503); +#4503 = DEFINITIONAL_REPRESENTATION('',(#4504),#4508); +#4504 = LINE('',#4505,#4506); +#4505 = CARTESIAN_POINT('',(15.850000000001,-2.175061948855)); +#4506 = VECTOR('',#4507,1.); +#4507 = DIRECTION('',(2.339301621926E-14,-1.)); +#4508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4509 = PCURVE('',#4510,#4515); +#4510 = PLANE('',#4511); +#4511 = AXIS2_PLACEMENT_3D('',#4512,#4513,#4514); +#4512 = CARTESIAN_POINT('',(2.809365050599,100.93621547692, + -9.735266447075)); +#4513 = DIRECTION('',(-6.906312355993E-17,-3.602940798565E-17,1.)); +#4514 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798565E-17)); +#4515 = DEFINITIONAL_REPRESENTATION('',(#4516),#4520); +#4516 = LINE('',#4517,#4518); +#4517 = CARTESIAN_POINT('',(-2.139868948849,3.049957850815)); +#4518 = VECTOR('',#4519,1.); +#4519 = DIRECTION('',(-1.,-4.423544863809E-16)); +#4520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4521 = ORIENTED_EDGE('',*,*,#4522,.T.); +#4522 = EDGE_CURVE('',#4495,#4523,#4525,.T.); +#4523 = VERTEX_POINT('',#4524); +#4524 = CARTESIAN_POINT('',(-0.240592800216,93.921196031393, + -19.83526644707)); +#4525 = SURFACE_CURVE('',#4526,(#4530,#4537),.PCURVE_S1.); +#4526 = LINE('',#4527,#4528); +#4527 = CARTESIAN_POINT('',(-0.240592800216,93.921196031393, + -10.83526644707)); +#4528 = VECTOR('',#4529,1.); +#4529 = DIRECTION('',(4.385035541948E-16,7.646979113944E-16,-1.)); +#4530 = PCURVE('',#2340,#4531); +#4531 = DEFINITIONAL_REPRESENTATION('',(#4532),#4536); +#4532 = LINE('',#4533,#4534); +#4533 = CARTESIAN_POINT('',(14.750000000001,-7.050212445536)); +#4534 = VECTOR('',#4535,1.); +#4535 = DIRECTION('',(-1.,-2.270037712386E-14)); +#4536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4537 = PCURVE('',#4538,#4543); +#4538 = CYLINDRICAL_SURFACE('',#4539,2.7); +#4539 = AXIS2_PLACEMENT_3D('',#4540,#4541,#4542); +#4540 = CARTESIAN_POINT('',(-0.240504400127,96.621196029945, + -10.83526644707)); +#4541 = DIRECTION('',(4.385035541948E-16,7.646979113944E-16,-1.)); +#4542 = DIRECTION('',(1.,-2.408960228275E-29,4.385035541948E-16)); +#4543 = DEFINITIONAL_REPRESENTATION('',(#4544),#4548); +#4544 = LINE('',#4545,#4546); +#4545 = CARTESIAN_POINT('',(7.854014374748,-3.552713678801E-15)); +#4546 = VECTOR('',#4547,1.); +#4547 = DIRECTION('',(0.,1.)); +#4548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4549 = ORIENTED_EDGE('',*,*,#4550,.T.); +#4550 = EDGE_CURVE('',#4523,#4551,#4553,.T.); +#4551 = VERTEX_POINT('',#4552); +#4552 = CARTESIAN_POINT('',(-0.240592800216,94.92119603223, + -19.83526644707)); +#4553 = SURFACE_CURVE('',#4554,(#4558,#4565),.PCURVE_S1.); +#4554 = LINE('',#4555,#4556); +#4555 = CARTESIAN_POINT('',(-0.240592800216,98.796346528074, + -19.83526644707)); +#4556 = VECTOR('',#4557,1.); +#4557 = DIRECTION('',(-6.28663787695E-15,1.,7.205881598492E-17)); +#4558 = PCURVE('',#2340,#4559); +#4559 = DEFINITIONAL_REPRESENTATION('',(#4560),#4564); +#4560 = LINE('',#4561,#4562); +#4561 = CARTESIAN_POINT('',(5.750000000001,-2.175061948855)); +#4562 = VECTOR('',#4563,1.); +#4563 = DIRECTION('',(-2.339301621926E-14,1.)); +#4564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4565 = PCURVE('',#4566,#4571); +#4566 = PLANE('',#4567); +#4567 = AXIS2_PLACEMENT_3D('',#4568,#4569,#4570); +#4568 = CARTESIAN_POINT('',(-0.2405929494,100.97140847692, + -19.83526644707)); +#4569 = DIRECTION('',(-6.906312354633E-17,-3.602940798568E-17,1.)); +#4570 = DIRECTION('',(-5.261416302648E-15,1.,3.602940798568E-17)); +#4571 = DEFINITIONAL_REPRESENTATION('',(#4572),#4576); +#4572 = LINE('',#4573,#4574); +#4573 = CARTESIAN_POINT('',(-2.175061948854,-1.491833765602E-07)); +#4574 = VECTOR('',#4575,1.); +#4575 = DIRECTION('',(1.,1.025221574301E-15)); +#4576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4577 = ORIENTED_EDGE('',*,*,#4578,.F.); +#4578 = EDGE_CURVE('',#4579,#4551,#4581,.T.); +#4579 = VERTEX_POINT('',#4580); +#4580 = CARTESIAN_POINT('',(-0.240592800216,94.92119603225, + -20.62826644707)); +#4581 = SURFACE_CURVE('',#4582,(#4586,#4593),.PCURVE_S1.); +#4582 = LINE('',#4583,#4584); +#4583 = CARTESIAN_POINT('',(-0.240592800216,94.92119603225, + -20.83526644707)); +#4584 = VECTOR('',#4585,1.); +#4585 = DIRECTION('',(-1.152780867537E-15,-5.701506641247E-15,1.)); +#4586 = PCURVE('',#2340,#4587); +#4587 = DEFINITIONAL_REPRESENTATION('',(#4588),#4592); +#4588 = LINE('',#4589,#4590); +#4589 = CARTESIAN_POINT('',(4.750000000001,-6.050212444679)); +#4590 = VECTOR('',#4591,1.); +#4591 = DIRECTION('',(1.,1.7763568394E-14)); +#4592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4593 = PCURVE('',#4594,#4599); +#4594 = CYLINDRICAL_SURFACE('',#4595,1.7); +#4595 = AXIS2_PLACEMENT_3D('',#4596,#4597,#4598); +#4596 = CARTESIAN_POINT('',(-0.240504400126,96.621196029952, + -20.83526644707)); +#4597 = DIRECTION('',(1.152780867537E-15,5.701506641247E-15,-1.)); +#4598 = DIRECTION('',(1.,-1.4064392352E-13,1.152780867536E-15)); +#4599 = DEFINITIONAL_REPRESENTATION('',(#4600),#4604); +#4600 = LINE('',#4601,#4602); +#4601 = CARTESIAN_POINT('',(7.854033634028,-1.06581410364E-14)); +#4602 = VECTOR('',#4603,1.); +#4603 = DIRECTION('',(0.,-1.)); +#4604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4605 = ORIENTED_EDGE('',*,*,#4606,.F.); +#4606 = EDGE_CURVE('',#4423,#4579,#4607,.T.); +#4607 = SURFACE_CURVE('',#4608,(#4613,#4621),.PCURVE_S1.); +#4608 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4609,#4610,#4611,#4612), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,1,3),( + 1.75281943683E-05,2.362789098599E-05,2.947551003048E-05), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.758785308735,1.890810318392,2.149402679352, +2.275970095127)) REPRESENTATION_ITEM('') ); +#4609 = CARTESIAN_POINT('',(-0.240592800216,94.421271537429, + -21.83519094137)); +#4610 = CARTESIAN_POINT('',(-0.240592800216,94.574886482851, + -21.46433165705)); +#4611 = CARTESIAN_POINT('',(-0.240592800216,94.821086454018, + -20.86995234824)); +#4612 = CARTESIAN_POINT('',(-0.240592800216,94.92119603225, + -20.62826644707)); +#4613 = PCURVE('',#2340,#4614); +#4614 = DEFINITIONAL_REPRESENTATION('',(#4615),#4620); +#4615 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4616,#4617,#4618,#4619), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,1,3),( + 1.75281943683E-05,2.362789098599E-05,2.947551003048E-05), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.758785308735,1.890810318392,2.149402679352, +2.275970095127)) REPRESENTATION_ITEM('') ); +#4616 = CARTESIAN_POINT('',(3.750075505702,-6.5501369395)); +#4617 = CARTESIAN_POINT('',(4.120934790022,-6.396521994078)); +#4618 = CARTESIAN_POINT('',(4.715314098836,-6.150322022911)); +#4619 = CARTESIAN_POINT('',(4.957000000001,-6.050212444679)); +#4620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4621 = PCURVE('',#4622,#4627); +#4622 = CONICAL_SURFACE('',#4623,1.949962247149,0.392699081699); +#4623 = AXIS2_PLACEMENT_3D('',#4624,#4625,#4626); +#4624 = CARTESIAN_POINT('',(-0.240504400126,96.621196029952, + -21.23172869422)); +#4625 = DIRECTION('',(4.311927094456E-16,-1.471804448241E-14,-1.)); +#4626 = DIRECTION('',(1.,-1.404537030873E-13,4.311927094477E-16)); +#4627 = DEFINITIONAL_REPRESENTATION('',(#4628),#4654); +#4628 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#4629,#4630,#4631,#4632,#4633, + #4634,#4635,#4636,#4637,#4638,#4639,#4640,#4641,#4642,#4643,#4644, + #4645,#4646,#4647,#4648,#4649,#4650,#4651,#4652,#4653), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (1.75281943683E-05,1.807125417113E-05,1.861431397396E-05, + 1.915737377678E-05,1.970043357961E-05,2.024349338244E-05, + 2.078655318526E-05,2.132961298809E-05,2.187267279091E-05, + 2.241573259374E-05,2.295879239657E-05,2.350185219939E-05, + 2.404491200222E-05,2.458797180504E-05,2.513103160787E-05, + 2.56740914107E-05,2.621715121352E-05,2.676021101635E-05, + 2.730327081918E-05,2.7846330622E-05,2.838939042483E-05, + 2.893245022765E-05,2.947551003048E-05),.QUASI_UNIFORM_KNOTS.); +#4629 = CARTESIAN_POINT('',(7.854021817213,0.603462247149)); +#4630 = CARTESIAN_POINT('',(7.854021996254,0.579798326335)); +#4631 = CARTESIAN_POINT('',(7.854022354338,0.533101909553)); +#4632 = CARTESIAN_POINT('',(7.854022891463,0.464881588841)); +#4633 = CARTESIAN_POINT('',(7.854023428588,0.398414183465)); +#4634 = CARTESIAN_POINT('',(7.854023965714,0.333633270956)); +#4635 = CARTESIAN_POINT('',(7.85402450284,0.270475396411)); +#4636 = CARTESIAN_POINT('',(7.854025039967,0.208880341554)); +#4637 = CARTESIAN_POINT('',(7.854025577093,0.148790805631)); +#4638 = CARTESIAN_POINT('',(7.85402611422,9.01522618564E-02)); +#4639 = CARTESIAN_POINT('',(7.854026651347,3.291278324895E-02)); +#4640 = CARTESIAN_POINT('',(7.854027188475,-2.29771082513E-02)); +#4641 = CARTESIAN_POINT('',(7.854027725603,-7.756458505886E-02)); +#4642 = CARTESIAN_POINT('',(7.854028262731,-0.130894646531)); +#4643 = CARTESIAN_POINT('',(7.854028799859,-0.183010242716)); +#4644 = CARTESIAN_POINT('',(7.854029336988,-0.233952389667)); +#4645 = CARTESIAN_POINT('',(7.854029874117,-0.283760277141)); +#4646 = CARTESIAN_POINT('',(7.854030411246,-0.332471368919)); +#4647 = CARTESIAN_POINT('',(7.854030948376,-0.380121497549)); +#4648 = CARTESIAN_POINT('',(7.854031485505,-0.426744949322)); +#4649 = CARTESIAN_POINT('',(7.854032022635,-0.472374557413)); +#4650 = CARTESIAN_POINT('',(7.854032559766,-0.517041738364)); +#4651 = CARTESIAN_POINT('',(7.854033096897,-0.5607767158)); +#4652 = CARTESIAN_POINT('',(7.854033454984,-0.589330920505)); +#4653 = CARTESIAN_POINT('',(7.854033634028,-0.60346224715)); +#4654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4655 = ADVANCED_FACE('',(#4656,#4851),#2420,.T.); +#4656 = FACE_BOUND('',#4657,.T.); +#4657 = EDGE_LOOP('',(#4658,#4683,#4706,#4729,#4750,#4751,#4752,#4753, + #4754,#4755,#4756,#4757,#4785,#4830)); +#4658 = ORIENTED_EDGE('',*,*,#4659,.T.); +#4659 = EDGE_CURVE('',#4660,#4662,#4664,.T.); +#4660 = VERTEX_POINT('',#4661); +#4661 = CARTESIAN_POINT('',(-0.240592800216,98.321196027674, + -19.83526644707)); +#4662 = VERTEX_POINT('',#4663); +#4663 = CARTESIAN_POINT('',(-0.240592800216,99.321196028498, + -19.83526644707)); +#4664 = SURFACE_CURVE('',#4665,(#4669,#4676),.PCURVE_S1.); +#4665 = LINE('',#4666,#4667); +#4666 = CARTESIAN_POINT('',(-0.240592800216,98.796346528074, + -19.83526644707)); +#4667 = VECTOR('',#4668,1.); +#4668 = DIRECTION('',(-6.28663787695E-15,1.,7.205881598492E-17)); +#4669 = PCURVE('',#2420,#4670); +#4670 = DEFINITIONAL_REPRESENTATION('',(#4671),#4675); +#4671 = LINE('',#4672,#4673); +#4672 = CARTESIAN_POINT('',(5.750000000001,-2.175061948855)); +#4673 = VECTOR('',#4674,1.); +#4674 = DIRECTION('',(-2.339301621926E-14,1.)); +#4675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4676 = PCURVE('',#4566,#4677); +#4677 = DEFINITIONAL_REPRESENTATION('',(#4678),#4682); +#4678 = LINE('',#4679,#4680); +#4679 = CARTESIAN_POINT('',(-2.175061948854,-1.491833765602E-07)); +#4680 = VECTOR('',#4681,1.); +#4681 = DIRECTION('',(1.,1.025221574301E-15)); +#4682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4683 = ORIENTED_EDGE('',*,*,#4684,.T.); +#4684 = EDGE_CURVE('',#4662,#4685,#4687,.T.); +#4685 = VERTEX_POINT('',#4686); +#4686 = CARTESIAN_POINT('',(-0.240592800216,99.321196028498, + -9.735266447075)); +#4687 = SURFACE_CURVE('',#4688,(#4692,#4699),.PCURVE_S1.); +#4688 = LINE('',#4689,#4690); +#4689 = CARTESIAN_POINT('',(-0.240592800216,99.321196028498, + -10.83526644707)); +#4690 = VECTOR('',#4691,1.); +#4691 = DIRECTION('',(-4.385035541948E-16,-7.646979113944E-16,1.)); +#4692 = PCURVE('',#2420,#4693); +#4693 = DEFINITIONAL_REPRESENTATION('',(#4694),#4698); +#4694 = LINE('',#4695,#4696); +#4695 = CARTESIAN_POINT('',(14.750000000001,-1.65021244843)); +#4696 = VECTOR('',#4697,1.); +#4697 = DIRECTION('',(1.,2.270037712386E-14)); +#4698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4699 = PCURVE('',#4538,#4700); +#4700 = DEFINITIONAL_REPRESENTATION('',(#4701),#4705); +#4701 = LINE('',#4702,#4703); +#4702 = CARTESIAN_POINT('',(4.712356239611,0.)); +#4703 = VECTOR('',#4704,1.); +#4704 = DIRECTION('',(0.,-1.)); +#4705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4706 = ORIENTED_EDGE('',*,*,#4707,.T.); +#4707 = EDGE_CURVE('',#4685,#4708,#4710,.T.); +#4708 = VERTEX_POINT('',#4709); +#4709 = CARTESIAN_POINT('',(-0.240592800217,98.121196027341, + -9.735266447075)); +#4710 = SURFACE_CURVE('',#4711,(#4715,#4722),.PCURVE_S1.); +#4711 = LINE('',#4712,#4713); +#4712 = CARTESIAN_POINT('',(-0.240592800216,98.796346528074, + -9.735266447075)); +#4713 = VECTOR('',#4714,1.); +#4714 = DIRECTION('',(6.28663787695E-15,-1.,-7.205881598494E-17)); +#4715 = PCURVE('',#2420,#4716); +#4716 = DEFINITIONAL_REPRESENTATION('',(#4717),#4721); +#4717 = LINE('',#4718,#4719); +#4718 = CARTESIAN_POINT('',(15.850000000001,-2.175061948855)); +#4719 = VECTOR('',#4720,1.); +#4720 = DIRECTION('',(2.339301621926E-14,-1.)); +#4721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4722 = PCURVE('',#4510,#4723); +#4723 = DEFINITIONAL_REPRESENTATION('',(#4724),#4728); +#4724 = LINE('',#4725,#4726); +#4725 = CARTESIAN_POINT('',(-2.139868948849,3.049957850815)); +#4726 = VECTOR('',#4727,1.); +#4727 = DIRECTION('',(-1.,-4.423544863809E-16)); +#4728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4729 = ORIENTED_EDGE('',*,*,#4730,.T.); +#4730 = EDGE_CURVE('',#4708,#2405,#4731,.T.); +#4731 = SURFACE_CURVE('',#4732,(#4736,#4743),.PCURVE_S1.); +#4732 = LINE('',#4733,#4734); +#4733 = CARTESIAN_POINT('',(-0.240592800217,98.121196027341, + -10.83526644707)); +#4734 = VECTOR('',#4735,1.); +#4735 = DIRECTION('',(-6.938893903907E-17,-1.262177448354E-29,1.)); +#4736 = PCURVE('',#2420,#4737); +#4737 = DEFINITIONAL_REPRESENTATION('',(#4738),#4742); +#4738 = LINE('',#4739,#4740); +#4739 = CARTESIAN_POINT('',(14.750000000001,-2.850212449588)); +#4740 = VECTOR('',#4741,1.); +#4741 = DIRECTION('',(1.,2.346507503525E-14)); +#4742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4743 = PCURVE('',#2451,#4744); +#4744 = DEFINITIONAL_REPRESENTATION('',(#4745),#4749); +#4745 = LINE('',#4746,#4747); +#4746 = CARTESIAN_POINT('',(1.570855260188,0.)); +#4747 = VECTOR('',#4748,1.); +#4748 = DIRECTION('',(0.,1.)); +#4749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4750 = ORIENTED_EDGE('',*,*,#2404,.F.); +#4751 = ORIENTED_EDGE('',*,*,#3995,.F.); +#4752 = ORIENTED_EDGE('',*,*,#3969,.T.); +#4753 = ORIENTED_EDGE('',*,*,#3919,.T.); +#4754 = ORIENTED_EDGE('',*,*,#3837,.T.); +#4755 = ORIENTED_EDGE('',*,*,#3810,.T.); +#4756 = ORIENTED_EDGE('',*,*,#3598,.F.); +#4757 = ORIENTED_EDGE('',*,*,#4758,.T.); +#4758 = EDGE_CURVE('',#3599,#4759,#4761,.T.); +#4759 = VERTEX_POINT('',#4760); +#4760 = CARTESIAN_POINT('',(-0.240592800216,98.593562109653, + -21.2858163354)); +#4761 = SURFACE_CURVE('',#4762,(#4767,#4778),.PCURVE_S1.); +#4762 = CIRCLE('',#4763,6.5); +#4763 = AXIS2_PLACEMENT_3D('',#4764,#4765,#4766); +#4764 = CARTESIAN_POINT('',(-0.240592800216,100.97140847692, + -27.33526644707)); +#4765 = DIRECTION('',(1.,6.28663787695E-15,-1.069399905187E-15)); +#4766 = DIRECTION('',(6.28663787695E-15,-1.,-2.346507503525E-14)); +#4767 = PCURVE('',#2420,#4768); +#4768 = DEFINITIONAL_REPRESENTATION('',(#4769),#4777); +#4769 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4770,#4771,#4772,#4773, +#4774,#4775,#4776),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#4770 = CARTESIAN_POINT('',(-1.75,-6.5)); +#4771 = CARTESIAN_POINT('',(-13.00833024919,-6.5)); +#4772 = CARTESIAN_POINT('',(-7.379165124599,3.25)); +#4773 = CARTESIAN_POINT('',(-1.75,13.)); +#4774 = CARTESIAN_POINT('',(3.879165124598,3.25)); +#4775 = CARTESIAN_POINT('',(9.508330249197,-6.5)); +#4776 = CARTESIAN_POINT('',(-1.75,-6.5)); +#4777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4778 = PCURVE('',#3688,#4779); +#4779 = DEFINITIONAL_REPRESENTATION('',(#4780),#4784); +#4780 = LINE('',#4781,#4782); +#4781 = CARTESIAN_POINT('',(6.28318530718,2.200092800179)); +#4782 = VECTOR('',#4783,1.); +#4783 = DIRECTION('',(-1.,-4.031607705537E-14)); +#4784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4785 = ORIENTED_EDGE('',*,*,#4786,.F.); +#4786 = EDGE_CURVE('',#4787,#4759,#4789,.T.); +#4787 = VERTEX_POINT('',#4788); +#4788 = CARTESIAN_POINT('',(-0.240592800216,98.321196027674, + -20.62826644707)); +#4789 = SURFACE_CURVE('',#4790,(#4794,#4801),.PCURVE_S1.); +#4790 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4791,#4792,#4793), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.051200276209, +1.051204050406),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.183207062101, +1.101515870434,1.019824092161)) REPRESENTATION_ITEM('') ); +#4791 = CARTESIAN_POINT('',(-0.240592800216,98.321196027674, + -20.62826644707)); +#4792 = CARTESIAN_POINT('',(-0.240592800216,98.447278866125, + -20.93265734524)); +#4793 = CARTESIAN_POINT('',(-0.240592800216,98.593562109653, + -21.2858163354)); +#4794 = PCURVE('',#2420,#4795); +#4795 = DEFINITIONAL_REPRESENTATION('',(#4796),#4800); +#4796 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4797,#4798,#4799), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.051200276209, +1.051204050406),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.183207062101, +1.101515870434,1.019824092161)) REPRESENTATION_ITEM('') ); +#4797 = CARTESIAN_POINT('',(4.957000000001,-2.650212449255)); +#4798 = CARTESIAN_POINT('',(4.652609101829,-2.524129610804)); +#4799 = CARTESIAN_POINT('',(4.299450111673,-2.377846367276)); +#4800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4801 = PCURVE('',#4622,#4802); +#4802 = DEFINITIONAL_REPRESENTATION('',(#4803),#4829); +#4803 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#4804,#4805,#4806,#4807,#4808, + #4809,#4810,#4811,#4812,#4813,#4814,#4815,#4816,#4817,#4818,#4819, + #4820,#4821,#4822,#4823,#4824,#4825,#4826,#4827,#4828), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (1.051200276209,1.051200447763,1.051200619317,1.051200790872, + 1.051200962426,1.051201133981,1.051201305535,1.05120147709, + 1.051201648644,1.051201820198,1.051201991753,1.051202163307, + 1.051202334862,1.051202506416,1.05120267797,1.051202849525, + 1.051203021079,1.051203192634,1.051203364188,1.051203535742, + 1.051203707297,1.051203878851,1.051204050406), + .QUASI_UNIFORM_KNOTS.); +#4804 = CARTESIAN_POINT('',(4.712336980332,-0.603462247142)); +#4805 = CARTESIAN_POINT('',(4.712337089131,-0.594875110035)); +#4806 = CARTESIAN_POINT('',(4.71233730673,-0.577593087914)); +#4807 = CARTESIAN_POINT('',(4.712337633128,-0.551340470108)); +#4808 = CARTESIAN_POINT('',(4.712337959527,-0.524751990241)); +#4809 = CARTESIAN_POINT('',(4.712338285925,-0.497821148734)); +#4810 = CARTESIAN_POINT('',(4.712338612323,-0.470541293759)); +#4811 = CARTESIAN_POINT('',(4.712338938721,-0.442905595611)); +#4812 = CARTESIAN_POINT('',(4.712339265118,-0.414907046412)); +#4813 = CARTESIAN_POINT('',(4.712339591516,-0.386538452736)); +#4814 = CARTESIAN_POINT('',(4.712339917914,-0.357792429835)); +#4815 = CARTESIAN_POINT('',(4.712340244311,-0.328661395131)); +#4816 = CARTESIAN_POINT('',(4.712340570709,-0.299137561571)); +#4817 = CARTESIAN_POINT('',(4.712340897106,-0.269212930684)); +#4818 = CARTESIAN_POINT('',(4.712341223503,-0.238879285355)); +#4819 = CARTESIAN_POINT('',(4.7123415499,-0.208128182306)); +#4820 = CARTESIAN_POINT('',(4.712341876297,-0.176950944269)); +#4821 = CARTESIAN_POINT('',(4.712342202694,-0.14533865177)); +#4822 = CARTESIAN_POINT('',(4.712342529091,-0.113282134829)); +#4823 = CARTESIAN_POINT('',(4.712342855487,-8.077196333453E-02)); +#4824 = CARTESIAN_POINT('',(4.712343181884,-4.779844059919E-02)); +#4825 = CARTESIAN_POINT('',(4.71234350828,-1.435158326955E-02)); +#4826 = CARTESIAN_POINT('',(4.712343834676,1.957884976003E-02)); +#4827 = CARTESIAN_POINT('',(4.712344052274,4.252862546607E-02)); +#4828 = CARTESIAN_POINT('',(4.712344161073,5.408764117778E-02)); +#4829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4830 = ORIENTED_EDGE('',*,*,#4831,.T.); +#4831 = EDGE_CURVE('',#4787,#4660,#4832,.T.); +#4832 = SURFACE_CURVE('',#4833,(#4837,#4844),.PCURVE_S1.); +#4833 = LINE('',#4834,#4835); +#4834 = CARTESIAN_POINT('',(-0.240592800216,98.321196027674, + -20.83526644707)); +#4835 = VECTOR('',#4836,1.); +#4836 = DIRECTION('',(-1.152780867537E-15,3.180277555754E-15,1.)); +#4837 = PCURVE('',#2420,#4838); +#4838 = DEFINITIONAL_REPRESENTATION('',(#4839),#4843); +#4839 = LINE('',#4840,#4841); +#4840 = CARTESIAN_POINT('',(4.750000000001,-2.650212449255)); +#4841 = VECTOR('',#4842,1.); +#4842 = DIRECTION('',(1.,2.6645352591E-14)); +#4843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4844 = PCURVE('',#4594,#4845); +#4845 = DEFINITIONAL_REPRESENTATION('',(#4846),#4850); +#4846 = LINE('',#4847,#4848); +#4847 = CARTESIAN_POINT('',(4.712336980332,1.101341240428E-13)); +#4848 = VECTOR('',#4849,1.); +#4849 = DIRECTION('',(0.,-1.)); +#4850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4851 = FACE_BOUND('',#4852,.T.); +#4852 = EDGE_LOOP('',(#4853)); +#4853 = ORIENTED_EDGE('',*,*,#2926,.T.); +#4854 = ADVANCED_FACE('',(#4855),#2451,.F.); +#4855 = FACE_BOUND('',#4856,.F.); +#4856 = EDGE_LOOP('',(#4857,#4858,#4859,#4860)); +#4857 = ORIENTED_EDGE('',*,*,#4730,.T.); +#4858 = ORIENTED_EDGE('',*,*,#2432,.T.); +#4859 = ORIENTED_EDGE('',*,*,#4471,.F.); +#4860 = ORIENTED_EDGE('',*,*,#4861,.T.); +#4861 = EDGE_CURVE('',#4472,#4708,#4862,.T.); +#4862 = SURFACE_CURVE('',#4863,(#4868,#4875),.PCURVE_S1.); +#4863 = CIRCLE('',#4864,1.5); +#4864 = AXIS2_PLACEMENT_3D('',#4865,#4866,#4867); +#4865 = CARTESIAN_POINT('',(-0.240504400127,96.621196029946, + -9.735266447075)); +#4866 = DIRECTION('',(-6.906312355993E-17,-3.602940798566E-17,1.)); +#4867 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798566E-17)); +#4868 = PCURVE('',#2451,#4869); +#4869 = DEFINITIONAL_REPRESENTATION('',(#4870),#4874); +#4870 = LINE('',#4871,#4872); +#4871 = CARTESIAN_POINT('',(-4.712388980385,1.1)); +#4872 = VECTOR('',#4873,1.); +#4873 = DIRECTION('',(1.,0.)); +#4874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4875 = PCURVE('',#4510,#4876); +#4876 = DEFINITIONAL_REPRESENTATION('',(#4877),#4881); +#4877 = CIRCLE('',#4878,1.5); +#4878 = AXIS2_PLACEMENT_2D('',#4879,#4880); +#4879 = CARTESIAN_POINT('',(-4.315019446977,3.049869450726)); +#4880 = DIRECTION('',(1.,-9.468819166108E-30)); +#4881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4882 = ADVANCED_FACE('',(#4883,#5050),#2715,.T.); +#4883 = FACE_BOUND('',#4884,.T.); +#4884 = EDGE_LOOP('',(#4885,#4908,#4941,#4969,#4998,#5026,#5047,#5048, + #5049)); +#4885 = ORIENTED_EDGE('',*,*,#4886,.T.); +#4886 = EDGE_CURVE('',#2674,#4887,#4889,.T.); +#4887 = VERTEX_POINT('',#4888); +#4888 = CARTESIAN_POINT('',(7.2593,82.8862,-27.3351)); +#4889 = SURFACE_CURVE('',#4890,(#4894,#4901),.PCURVE_S1.); +#4890 = LINE('',#4891,#4892); +#4891 = CARTESIAN_POINT('',(7.2593,93.936224946292,-27.3351)); +#4892 = VECTOR('',#4893,1.); +#4893 = DIRECTION('',(0.,-1.,0.)); +#4894 = PCURVE('',#2715,#4895); +#4895 = DEFINITIONAL_REPRESENTATION('',(#4896),#4900); +#4896 = LINE('',#4897,#4898); +#4897 = CARTESIAN_POINT('',(13.,-1.186224946292)); +#4898 = VECTOR('',#4899,1.); +#4899 = DIRECTION('',(0.,1.)); +#4900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4901 = PCURVE('',#2688,#4902); +#4902 = DEFINITIONAL_REPRESENTATION('',(#4903),#4907); +#4903 = LINE('',#4904,#4905); +#4904 = CARTESIAN_POINT('',(5.,1.186224946292)); +#4905 = VECTOR('',#4906,1.); +#4906 = DIRECTION('',(0.,-1.)); +#4907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4908 = ORIENTED_EDGE('',*,*,#4909,.F.); +#4909 = EDGE_CURVE('',#4910,#4887,#4912,.T.); +#4910 = VERTEX_POINT('',#4911); +#4911 = CARTESIAN_POINT('',(7.2593,81.1862,-29.0351)); +#4912 = SURFACE_CURVE('',#4913,(#4918,#4929),.PCURVE_S1.); +#4913 = CIRCLE('',#4914,1.7); +#4914 = AXIS2_PLACEMENT_3D('',#4915,#4916,#4917); +#4915 = CARTESIAN_POINT('',(7.2593,82.8862,-29.0351)); +#4916 = DIRECTION('',(-1.,0.,-0.)); +#4917 = DIRECTION('',(-0.,0.,1.)); +#4918 = PCURVE('',#2715,#4919); +#4919 = DEFINITIONAL_REPRESENTATION('',(#4920),#4928); +#4920 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4921,#4922,#4923,#4924, +#4925,#4926,#4927),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#4921 = CARTESIAN_POINT('',(13.,9.8638)); +#4922 = CARTESIAN_POINT('',(13.,6.919313627133)); +#4923 = CARTESIAN_POINT('',(10.45,8.391556813566)); +#4924 = CARTESIAN_POINT('',(7.9,9.8638)); +#4925 = CARTESIAN_POINT('',(10.45,11.336043186434)); +#4926 = CARTESIAN_POINT('',(13.,12.808286372867)); +#4927 = CARTESIAN_POINT('',(13.,9.8638)); +#4928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4929 = PCURVE('',#4930,#4935); +#4930 = CYLINDRICAL_SURFACE('',#4931,1.7); +#4931 = AXIS2_PLACEMENT_3D('',#4932,#4933,#4934); +#4932 = CARTESIAN_POINT('',(2.2593,82.8862,-29.0351)); +#4933 = DIRECTION('',(1.,0.,0.)); +#4934 = DIRECTION('',(0.,-1.,0.)); +#4935 = DEFINITIONAL_REPRESENTATION('',(#4936),#4940); +#4936 = LINE('',#4937,#4938); +#4937 = CARTESIAN_POINT('',(4.712388980385,5.)); +#4938 = VECTOR('',#4939,1.); +#4939 = DIRECTION('',(-1.,0.)); +#4940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4941 = ORIENTED_EDGE('',*,*,#4942,.F.); +#4942 = EDGE_CURVE('',#4943,#4910,#4945,.T.); +#4943 = VERTEX_POINT('',#4944); +#4944 = CARTESIAN_POINT('',(7.2593,81.1862,-38.6351)); +#4945 = SURFACE_CURVE('',#4946,(#4950,#4957),.PCURVE_S1.); +#4946 = LINE('',#4947,#4948); +#4947 = CARTESIAN_POINT('',(7.2593,81.1862,-40.3351)); +#4948 = VECTOR('',#4949,1.); +#4949 = DIRECTION('',(0.,0.,1.)); +#4950 = PCURVE('',#2715,#4951); +#4951 = DEFINITIONAL_REPRESENTATION('',(#4952),#4956); +#4952 = LINE('',#4953,#4954); +#4953 = CARTESIAN_POINT('',(0.,11.5638)); +#4954 = VECTOR('',#4955,1.); +#4955 = DIRECTION('',(1.,0.)); +#4956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4957 = PCURVE('',#4958,#4963); +#4958 = PLANE('',#4959); +#4959 = AXIS2_PLACEMENT_3D('',#4960,#4961,#4962); +#4960 = CARTESIAN_POINT('',(2.2593,81.1862,-40.3351)); +#4961 = DIRECTION('',(0.,1.,0.)); +#4962 = DIRECTION('',(0.,0.,1.)); +#4963 = DEFINITIONAL_REPRESENTATION('',(#4964),#4968); +#4964 = LINE('',#4965,#4966); +#4965 = CARTESIAN_POINT('',(0.,5.)); +#4966 = VECTOR('',#4967,1.); +#4967 = DIRECTION('',(1.,0.)); +#4968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4969 = ORIENTED_EDGE('',*,*,#4970,.T.); +#4970 = EDGE_CURVE('',#4943,#4971,#4973,.T.); +#4971 = VERTEX_POINT('',#4972); +#4972 = CARTESIAN_POINT('',(7.2593,82.8862,-40.3351)); +#4973 = SURFACE_CURVE('',#4974,(#4979,#4986),.PCURVE_S1.); +#4974 = CIRCLE('',#4975,1.7); +#4975 = AXIS2_PLACEMENT_3D('',#4976,#4977,#4978); +#4976 = CARTESIAN_POINT('',(7.2593,82.8862,-38.6351)); +#4977 = DIRECTION('',(1.,0.,0.)); +#4978 = DIRECTION('',(-0.,0.,1.)); +#4979 = PCURVE('',#2715,#4980); +#4980 = DEFINITIONAL_REPRESENTATION('',(#4981),#4985); +#4981 = CIRCLE('',#4982,1.7); +#4982 = AXIS2_PLACEMENT_2D('',#4983,#4984); +#4983 = CARTESIAN_POINT('',(1.7,9.8638)); +#4984 = DIRECTION('',(1.,0.)); +#4985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4986 = PCURVE('',#4987,#4992); +#4987 = CYLINDRICAL_SURFACE('',#4988,1.7); +#4988 = AXIS2_PLACEMENT_3D('',#4989,#4990,#4991); +#4989 = CARTESIAN_POINT('',(2.2593,82.8862,-38.6351)); +#4990 = DIRECTION('',(1.,0.,0.)); +#4991 = DIRECTION('',(0.,-1.,0.)); +#4992 = DEFINITIONAL_REPRESENTATION('',(#4993),#4997); +#4993 = LINE('',#4994,#4995); +#4994 = CARTESIAN_POINT('',(-1.570796326795,5.)); +#4995 = VECTOR('',#4996,1.); +#4996 = DIRECTION('',(1.,0.)); +#4997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4998 = ORIENTED_EDGE('',*,*,#4999,.T.); +#4999 = EDGE_CURVE('',#4971,#5000,#5002,.T.); +#5000 = VERTEX_POINT('',#5001); +#5001 = CARTESIAN_POINT('',(7.2593,98.75,-40.3351)); +#5002 = SURFACE_CURVE('',#5003,(#5007,#5014),.PCURVE_S1.); +#5003 = LINE('',#5004,#5005); +#5004 = CARTESIAN_POINT('',(7.2593,82.8862,-40.3351)); +#5005 = VECTOR('',#5006,1.); +#5006 = DIRECTION('',(0.,1.,0.)); +#5007 = PCURVE('',#2715,#5008); +#5008 = DEFINITIONAL_REPRESENTATION('',(#5009),#5013); +#5009 = LINE('',#5010,#5011); +#5010 = CARTESIAN_POINT('',(0.,9.8638)); +#5011 = VECTOR('',#5012,1.); +#5012 = DIRECTION('',(0.,-1.)); +#5013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5014 = PCURVE('',#5015,#5020); +#5015 = PLANE('',#5016); +#5016 = AXIS2_PLACEMENT_3D('',#5017,#5018,#5019); +#5017 = CARTESIAN_POINT('',(2.2593,92.75,-40.3351)); +#5018 = DIRECTION('',(0.,0.,1.)); +#5019 = DIRECTION('',(1.,0.,0.)); +#5020 = DEFINITIONAL_REPRESENTATION('',(#5021),#5025); +#5021 = LINE('',#5022,#5023); +#5022 = CARTESIAN_POINT('',(5.,-9.8638)); +#5023 = VECTOR('',#5024,1.); +#5024 = DIRECTION('',(0.,1.)); +#5025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5026 = ORIENTED_EDGE('',*,*,#5027,.T.); +#5027 = EDGE_CURVE('',#5000,#2827,#5028,.T.); +#5028 = SURFACE_CURVE('',#5029,(#5033,#5040),.PCURVE_S1.); +#5029 = LINE('',#5030,#5031); +#5030 = CARTESIAN_POINT('',(7.2593,98.75,-40.3351)); +#5031 = VECTOR('',#5032,1.); +#5032 = DIRECTION('',(0.,0.,1.)); +#5033 = PCURVE('',#2715,#5034); +#5034 = DEFINITIONAL_REPRESENTATION('',(#5035),#5039); +#5035 = LINE('',#5036,#5037); +#5036 = CARTESIAN_POINT('',(0.,-6.)); +#5037 = VECTOR('',#5038,1.); +#5038 = DIRECTION('',(1.,0.)); +#5039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5040 = PCURVE('',#2865,#5041); +#5041 = DEFINITIONAL_REPRESENTATION('',(#5042),#5046); +#5042 = LINE('',#5043,#5044); +#5043 = CARTESIAN_POINT('',(0.,5.)); +#5044 = VECTOR('',#5045,1.); +#5045 = DIRECTION('',(1.,0.)); +#5046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5047 = ORIENTED_EDGE('',*,*,#2826,.F.); +#5048 = ORIENTED_EDGE('',*,*,#2753,.T.); +#5049 = ORIENTED_EDGE('',*,*,#2700,.T.); +#5050 = FACE_BOUND('',#5051,.T.); +#5051 = EDGE_LOOP('',(#5052)); +#5052 = ORIENTED_EDGE('',*,*,#5053,.F.); +#5053 = EDGE_CURVE('',#5054,#5054,#5056,.T.); +#5054 = VERTEX_POINT('',#5055); +#5055 = CARTESIAN_POINT('',(7.2593,88.1862,-31.4851)); +#5056 = SURFACE_CURVE('',#5057,(#5062,#5069),.PCURVE_S1.); +#5057 = CIRCLE('',#5058,2.35); +#5058 = AXIS2_PLACEMENT_3D('',#5059,#5060,#5061); +#5059 = CARTESIAN_POINT('',(7.2593,88.1862,-33.8351)); +#5060 = DIRECTION('',(1.,0.,0.)); +#5061 = DIRECTION('',(-0.,0.,1.)); +#5062 = PCURVE('',#2715,#5063); +#5063 = DEFINITIONAL_REPRESENTATION('',(#5064),#5068); +#5064 = CIRCLE('',#5065,2.35); +#5065 = AXIS2_PLACEMENT_2D('',#5066,#5067); +#5066 = CARTESIAN_POINT('',(6.5,4.5638)); +#5067 = DIRECTION('',(1.,0.)); +#5068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5069 = PCURVE('',#5070,#5075); +#5070 = CYLINDRICAL_SURFACE('',#5071,2.35); +#5071 = AXIS2_PLACEMENT_3D('',#5072,#5073,#5074); +#5072 = CARTESIAN_POINT('',(2.0093,88.1862,-33.8351)); +#5073 = DIRECTION('',(1.,0.,0.)); +#5074 = DIRECTION('',(-0.,0.,1.)); +#5075 = DEFINITIONAL_REPRESENTATION('',(#5076),#5080); +#5076 = LINE('',#5077,#5078); +#5077 = CARTESIAN_POINT('',(0.,5.25)); +#5078 = VECTOR('',#5079,1.); +#5079 = DIRECTION('',(1.,0.)); +#5080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5081 = ADVANCED_FACE('',(#5082),#2688,.T.); +#5082 = FACE_BOUND('',#5083,.T.); +#5083 = EDGE_LOOP('',(#5084,#5107,#5128,#5129)); +#5084 = ORIENTED_EDGE('',*,*,#5085,.T.); +#5085 = EDGE_CURVE('',#2647,#5086,#5088,.T.); +#5086 = VERTEX_POINT('',#5087); +#5087 = CARTESIAN_POINT('',(2.2593,82.8862,-27.3351)); +#5088 = SURFACE_CURVE('',#5089,(#5093,#5100),.PCURVE_S1.); +#5089 = LINE('',#5090,#5091); +#5090 = CARTESIAN_POINT('',(2.2593,93.936224946292,-27.3351)); +#5091 = VECTOR('',#5092,1.); +#5092 = DIRECTION('',(0.,-1.,0.)); +#5093 = PCURVE('',#2688,#5094); +#5094 = DEFINITIONAL_REPRESENTATION('',(#5095),#5099); +#5095 = LINE('',#5096,#5097); +#5096 = CARTESIAN_POINT('',(0.,1.186224946292)); +#5097 = VECTOR('',#5098,1.); +#5098 = DIRECTION('',(0.,-1.)); +#5099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5100 = PCURVE('',#2661,#5101); +#5101 = DEFINITIONAL_REPRESENTATION('',(#5102),#5106); +#5102 = LINE('',#5103,#5104); +#5103 = CARTESIAN_POINT('',(13.,-1.186224946292)); +#5104 = VECTOR('',#5105,1.); +#5105 = DIRECTION('',(0.,1.)); +#5106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5107 = ORIENTED_EDGE('',*,*,#5108,.T.); +#5108 = EDGE_CURVE('',#5086,#4887,#5109,.T.); +#5109 = SURFACE_CURVE('',#5110,(#5114,#5121),.PCURVE_S1.); +#5110 = LINE('',#5111,#5112); +#5111 = CARTESIAN_POINT('',(2.2593,82.8862,-27.3351)); +#5112 = VECTOR('',#5113,1.); +#5113 = DIRECTION('',(1.,0.,0.)); +#5114 = PCURVE('',#2688,#5115); +#5115 = DEFINITIONAL_REPRESENTATION('',(#5116),#5120); +#5116 = LINE('',#5117,#5118); +#5117 = CARTESIAN_POINT('',(0.,-9.8638)); +#5118 = VECTOR('',#5119,1.); +#5119 = DIRECTION('',(1.,0.)); +#5120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5121 = PCURVE('',#4930,#5122); +#5122 = DEFINITIONAL_REPRESENTATION('',(#5123),#5127); +#5123 = LINE('',#5124,#5125); +#5124 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#5125 = VECTOR('',#5126,1.); +#5126 = DIRECTION('',(-0.,1.)); +#5127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5128 = ORIENTED_EDGE('',*,*,#4886,.F.); +#5129 = ORIENTED_EDGE('',*,*,#2673,.T.); +#5130 = ADVANCED_FACE('',(#5131,#5256),#2661,.F.); +#5131 = FACE_BOUND('',#5132,.F.); +#5132 = EDGE_LOOP('',(#5133,#5134,#5162,#5185,#5209,#5232,#5253,#5254, + #5255)); +#5133 = ORIENTED_EDGE('',*,*,#5085,.T.); +#5134 = ORIENTED_EDGE('',*,*,#5135,.F.); +#5135 = EDGE_CURVE('',#5136,#5086,#5138,.T.); +#5136 = VERTEX_POINT('',#5137); +#5137 = CARTESIAN_POINT('',(2.2593,81.1862,-29.0351)); +#5138 = SURFACE_CURVE('',#5139,(#5144,#5155),.PCURVE_S1.); +#5139 = CIRCLE('',#5140,1.7); +#5140 = AXIS2_PLACEMENT_3D('',#5141,#5142,#5143); +#5141 = CARTESIAN_POINT('',(2.2593,82.8862,-29.0351)); +#5142 = DIRECTION('',(-1.,0.,-0.)); +#5143 = DIRECTION('',(-0.,0.,1.)); +#5144 = PCURVE('',#2661,#5145); +#5145 = DEFINITIONAL_REPRESENTATION('',(#5146),#5154); +#5146 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5147,#5148,#5149,#5150, +#5151,#5152,#5153),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5147 = CARTESIAN_POINT('',(13.,9.8638)); +#5148 = CARTESIAN_POINT('',(13.,6.919313627133)); +#5149 = CARTESIAN_POINT('',(10.45,8.391556813566)); +#5150 = CARTESIAN_POINT('',(7.9,9.8638)); +#5151 = CARTESIAN_POINT('',(10.45,11.336043186434)); +#5152 = CARTESIAN_POINT('',(13.,12.808286372867)); +#5153 = CARTESIAN_POINT('',(13.,9.8638)); +#5154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5155 = PCURVE('',#4930,#5156); +#5156 = DEFINITIONAL_REPRESENTATION('',(#5157),#5161); +#5157 = LINE('',#5158,#5159); +#5158 = CARTESIAN_POINT('',(4.712388980385,-0.)); +#5159 = VECTOR('',#5160,1.); +#5160 = DIRECTION('',(-1.,0.)); +#5161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5162 = ORIENTED_EDGE('',*,*,#5163,.F.); +#5163 = EDGE_CURVE('',#5164,#5136,#5166,.T.); +#5164 = VERTEX_POINT('',#5165); +#5165 = CARTESIAN_POINT('',(2.2593,81.1862,-38.6351)); +#5166 = SURFACE_CURVE('',#5167,(#5171,#5178),.PCURVE_S1.); +#5167 = LINE('',#5168,#5169); +#5168 = CARTESIAN_POINT('',(2.2593,81.1862,-40.3351)); +#5169 = VECTOR('',#5170,1.); +#5170 = DIRECTION('',(0.,0.,1.)); +#5171 = PCURVE('',#2661,#5172); +#5172 = DEFINITIONAL_REPRESENTATION('',(#5173),#5177); +#5173 = LINE('',#5174,#5175); +#5174 = CARTESIAN_POINT('',(0.,11.5638)); +#5175 = VECTOR('',#5176,1.); +#5176 = DIRECTION('',(1.,0.)); +#5177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5178 = PCURVE('',#4958,#5179); +#5179 = DEFINITIONAL_REPRESENTATION('',(#5180),#5184); +#5180 = LINE('',#5181,#5182); +#5181 = CARTESIAN_POINT('',(0.,0.)); +#5182 = VECTOR('',#5183,1.); +#5183 = DIRECTION('',(1.,0.)); +#5184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5185 = ORIENTED_EDGE('',*,*,#5186,.T.); +#5186 = EDGE_CURVE('',#5164,#5187,#5189,.T.); +#5187 = VERTEX_POINT('',#5188); +#5188 = CARTESIAN_POINT('',(2.2593,82.8862,-40.3351)); +#5189 = SURFACE_CURVE('',#5190,(#5195,#5202),.PCURVE_S1.); +#5190 = CIRCLE('',#5191,1.7); +#5191 = AXIS2_PLACEMENT_3D('',#5192,#5193,#5194); +#5192 = CARTESIAN_POINT('',(2.2593,82.8862,-38.6351)); +#5193 = DIRECTION('',(1.,0.,0.)); +#5194 = DIRECTION('',(-0.,0.,1.)); +#5195 = PCURVE('',#2661,#5196); +#5196 = DEFINITIONAL_REPRESENTATION('',(#5197),#5201); +#5197 = CIRCLE('',#5198,1.7); +#5198 = AXIS2_PLACEMENT_2D('',#5199,#5200); +#5199 = CARTESIAN_POINT('',(1.7,9.8638)); +#5200 = DIRECTION('',(1.,0.)); +#5201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5202 = PCURVE('',#4987,#5203); +#5203 = DEFINITIONAL_REPRESENTATION('',(#5204),#5208); +#5204 = LINE('',#5205,#5206); +#5205 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#5206 = VECTOR('',#5207,1.); +#5207 = DIRECTION('',(1.,0.)); +#5208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5209 = ORIENTED_EDGE('',*,*,#5210,.F.); +#5210 = EDGE_CURVE('',#5211,#5187,#5213,.T.); +#5211 = VERTEX_POINT('',#5212); +#5212 = CARTESIAN_POINT('',(2.2593,98.75,-40.3351)); +#5213 = SURFACE_CURVE('',#5214,(#5218,#5225),.PCURVE_S1.); +#5214 = LINE('',#5215,#5216); +#5215 = CARTESIAN_POINT('',(2.2593,98.75,-40.3351)); +#5216 = VECTOR('',#5217,1.); +#5217 = DIRECTION('',(0.,-1.,0.)); +#5218 = PCURVE('',#2661,#5219); +#5219 = DEFINITIONAL_REPRESENTATION('',(#5220),#5224); +#5220 = LINE('',#5221,#5222); +#5221 = CARTESIAN_POINT('',(0.,-6.)); +#5222 = VECTOR('',#5223,1.); +#5223 = DIRECTION('',(0.,1.)); +#5224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5225 = PCURVE('',#5015,#5226); +#5226 = DEFINITIONAL_REPRESENTATION('',(#5227),#5231); +#5227 = LINE('',#5228,#5229); +#5228 = CARTESIAN_POINT('',(0.,6.)); +#5229 = VECTOR('',#5230,1.); +#5230 = DIRECTION('',(0.,-1.)); +#5231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5232 = ORIENTED_EDGE('',*,*,#5233,.T.); +#5233 = EDGE_CURVE('',#5211,#2851,#5234,.T.); +#5234 = SURFACE_CURVE('',#5235,(#5239,#5246),.PCURVE_S1.); +#5235 = LINE('',#5236,#5237); +#5236 = CARTESIAN_POINT('',(2.2593,98.75,-40.3351)); +#5237 = VECTOR('',#5238,1.); +#5238 = DIRECTION('',(0.,0.,1.)); +#5239 = PCURVE('',#2661,#5240); +#5240 = DEFINITIONAL_REPRESENTATION('',(#5241),#5245); +#5241 = LINE('',#5242,#5243); +#5242 = CARTESIAN_POINT('',(0.,-6.)); +#5243 = VECTOR('',#5244,1.); +#5244 = DIRECTION('',(1.,0.)); +#5245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5246 = PCURVE('',#2865,#5247); +#5247 = DEFINITIONAL_REPRESENTATION('',(#5248),#5252); +#5248 = LINE('',#5249,#5250); +#5249 = CARTESIAN_POINT('',(0.,0.)); +#5250 = VECTOR('',#5251,1.); +#5251 = DIRECTION('',(1.,0.)); +#5252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5253 = ORIENTED_EDGE('',*,*,#2876,.F.); +#5254 = ORIENTED_EDGE('',*,*,#4367,.T.); +#5255 = ORIENTED_EDGE('',*,*,#2646,.T.); +#5256 = FACE_BOUND('',#5257,.F.); +#5257 = EDGE_LOOP('',(#5258)); +#5258 = ORIENTED_EDGE('',*,*,#5259,.F.); +#5259 = EDGE_CURVE('',#5260,#5260,#5262,.T.); +#5260 = VERTEX_POINT('',#5261); +#5261 = CARTESIAN_POINT('',(2.2593,88.1862,-29.3351)); +#5262 = SURFACE_CURVE('',#5263,(#5268,#5275),.PCURVE_S1.); +#5263 = CIRCLE('',#5264,4.5); +#5264 = AXIS2_PLACEMENT_3D('',#5265,#5266,#5267); +#5265 = CARTESIAN_POINT('',(2.2593,88.1862,-33.8351)); +#5266 = DIRECTION('',(1.,0.,0.)); +#5267 = DIRECTION('',(-0.,0.,1.)); +#5268 = PCURVE('',#2661,#5269); +#5269 = DEFINITIONAL_REPRESENTATION('',(#5270),#5274); +#5270 = CIRCLE('',#5271,4.5); +#5271 = AXIS2_PLACEMENT_2D('',#5272,#5273); +#5272 = CARTESIAN_POINT('',(6.5,4.5638)); +#5273 = DIRECTION('',(1.,0.)); +#5274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5275 = PCURVE('',#5276,#5281); +#5276 = CYLINDRICAL_SURFACE('',#5277,4.5); +#5277 = AXIS2_PLACEMENT_3D('',#5278,#5279,#5280); +#5278 = CARTESIAN_POINT('',(2.0093,88.1862,-33.8351)); +#5279 = DIRECTION('',(1.,0.,0.)); +#5280 = DIRECTION('',(-0.,0.,1.)); +#5281 = DEFINITIONAL_REPRESENTATION('',(#5282),#5286); +#5282 = LINE('',#5283,#5284); +#5283 = CARTESIAN_POINT('',(0.,0.25)); +#5284 = VECTOR('',#5285,1.); +#5285 = DIRECTION('',(1.,0.)); +#5286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5287 = ADVANCED_FACE('',(#5288),#2611,.F.); +#5288 = FACE_BOUND('',#5289,.T.); +#5289 = EDGE_LOOP('',(#5290,#5291,#5313)); +#5290 = ORIENTED_EDGE('',*,*,#2595,.F.); +#5291 = ORIENTED_EDGE('',*,*,#5292,.T.); +#5292 = EDGE_CURVE('',#2541,#4051,#5293,.T.); +#5293 = SURFACE_CURVE('',#5294,(#5299,#5306),.PCURVE_S1.); +#5294 = CIRCLE('',#5295,2.211743); +#5295 = AXIS2_PLACEMENT_3D('',#5296,#5297,#5298); +#5296 = CARTESIAN_POINT('',(-0.240504400126,94.678196029952, + -27.83509053063)); +#5297 = DIRECTION('',(-1.152780867537E-15,-5.392371681819E-15,1.)); +#5298 = DIRECTION('',(-5.844283390569E-15,1.,5.392371681819E-15)); +#5299 = PCURVE('',#2611,#5300); +#5300 = DEFINITIONAL_REPRESENTATION('',(#5301),#5305); +#5301 = CIRCLE('',#5302,2.211743); +#5302 = AXIS2_PLACEMENT_2D('',#5303,#5304); +#5303 = CARTESIAN_POINT('',(1.258019477316,6.100004400168)); +#5304 = DIRECTION('',(-1.,-1.08957981526E-14)); +#5305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5306 = PCURVE('',#2561,#5307); +#5307 = DEFINITIONAL_REPRESENTATION('',(#5308),#5312); +#5308 = LINE('',#5309,#5310); +#5309 = CARTESIAN_POINT('',(3.875433956651,16.999824083562)); +#5310 = VECTOR('',#5311,1.); +#5311 = DIRECTION('',(-1.,0.)); +#5312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5313 = ORIENTED_EDGE('',*,*,#4248,.T.); +#5314 = ADVANCED_FACE('',(#5315),#2561,.F.); +#5315 = FACE_BOUND('',#5316,.F.); +#5316 = EDGE_LOOP('',(#5317,#5318,#5319,#5341,#5342)); +#5317 = ORIENTED_EDGE('',*,*,#5292,.T.); +#5318 = ORIENTED_EDGE('',*,*,#4048,.F.); +#5319 = ORIENTED_EDGE('',*,*,#5320,.F.); +#5320 = EDGE_CURVE('',#4425,#4049,#5321,.T.); +#5321 = SURFACE_CURVE('',#5322,(#5327,#5334),.PCURVE_S1.); +#5322 = CIRCLE('',#5323,2.211743); +#5323 = AXIS2_PLACEMENT_3D('',#5324,#5325,#5326); +#5324 = CARTESIAN_POINT('',(-0.240504400126,94.678196029952, + -21.83526644707)); +#5325 = DIRECTION('',(-6.906312354635E-17,-3.602940798575E-17,1.)); +#5326 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798575E-17)); +#5327 = PCURVE('',#2561,#5328); +#5328 = DEFINITIONAL_REPRESENTATION('',(#5329),#5333); +#5329 = LINE('',#5330,#5331); +#5330 = CARTESIAN_POINT('',(3.875433956651,11.)); +#5331 = VECTOR('',#5332,1.); +#5332 = DIRECTION('',(-1.,0.)); +#5333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5334 = PCURVE('',#4089,#5335); +#5335 = DEFINITIONAL_REPRESENTATION('',(#5336),#5340); +#5336 = CIRCLE('',#5337,2.211743); +#5337 = AXIS2_PLACEMENT_2D('',#5338,#5339); +#5338 = CARTESIAN_POINT('',(-6.293212446976,-8.854927388521E-05)); +#5339 = DIRECTION('',(1.,-2.488303455022E-33)); +#5340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5341 = ORIENTED_EDGE('',*,*,#4447,.F.); +#5342 = ORIENTED_EDGE('',*,*,#2540,.T.); +#5343 = ADVANCED_FACE('',(#5344),#2865,.T.); +#5344 = FACE_BOUND('',#5345,.T.); +#5345 = EDGE_LOOP('',(#5346,#5347,#5368,#5369)); +#5346 = ORIENTED_EDGE('',*,*,#5027,.F.); +#5347 = ORIENTED_EDGE('',*,*,#5348,.F.); +#5348 = EDGE_CURVE('',#5211,#5000,#5349,.T.); +#5349 = SURFACE_CURVE('',#5350,(#5354,#5361),.PCURVE_S1.); +#5350 = LINE('',#5351,#5352); +#5351 = CARTESIAN_POINT('',(2.2593,98.75,-40.3351)); +#5352 = VECTOR('',#5353,1.); +#5353 = DIRECTION('',(1.,0.,0.)); +#5354 = PCURVE('',#2865,#5355); +#5355 = DEFINITIONAL_REPRESENTATION('',(#5356),#5360); +#5356 = LINE('',#5357,#5358); +#5357 = CARTESIAN_POINT('',(0.,0.)); +#5358 = VECTOR('',#5359,1.); +#5359 = DIRECTION('',(0.,1.)); +#5360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5361 = PCURVE('',#5015,#5362); +#5362 = DEFINITIONAL_REPRESENTATION('',(#5363),#5367); +#5363 = LINE('',#5364,#5365); +#5364 = CARTESIAN_POINT('',(0.,6.)); +#5365 = VECTOR('',#5366,1.); +#5366 = DIRECTION('',(1.,0.)); +#5367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5368 = ORIENTED_EDGE('',*,*,#5233,.T.); +#5369 = ORIENTED_EDGE('',*,*,#2850,.T.); +#5370 = ADVANCED_FACE('',(#5371),#3193,.F.); +#5371 = FACE_BOUND('',#5372,.F.); +#5372 = EDGE_LOOP('',(#5373,#5374,#5395,#5414,#5415,#5416,#5417,#5438)); +#5373 = ORIENTED_EDGE('',*,*,#3453,.F.); +#5374 = ORIENTED_EDGE('',*,*,#5375,.F.); +#5375 = EDGE_CURVE('',#5376,#3454,#5378,.T.); +#5376 = VERTEX_POINT('',#5377); +#5377 = CARTESIAN_POINT('',(5.359322901415,98.75,-27.3351)); +#5378 = SURFACE_CURVE('',#5379,(#5383,#5389),.PCURVE_S1.); +#5379 = LINE('',#5380,#5381); +#5380 = CARTESIAN_POINT('',(5.359322901415,98.75,-38.88518322353)); +#5381 = VECTOR('',#5382,1.); +#5382 = DIRECTION('',(-4.660627617663E-16,0.,-1.)); +#5383 = PCURVE('',#3193,#5384); +#5384 = DEFINITIONAL_REPRESENTATION('',(#5385),#5388); +#5385 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5386,#5387),.UNSPECIFIED.,.F., + .F.,(2,2),(-11.55008322353,-8.499916776462),.PIECEWISE_BEZIER_KNOTS.); +#5386 = CARTESIAN_POINT('',(10.100166447075,21.959008800137)); +#5387 = CARTESIAN_POINT('',(7.05,21.959008800137)); +#5388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5389 = PCURVE('',#3493,#5390); +#5390 = DEFINITIONAL_REPRESENTATION('',(#5391),#5394); +#5391 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5392,#5393),.UNSPECIFIED.,.F., + .F.,(2,2),(-11.55008322353,-8.499916776462),.PIECEWISE_BEZIER_KNOTS.); +#5392 = CARTESIAN_POINT('',(13.,3.100022901415)); +#5393 = CARTESIAN_POINT('',(9.949833552924,3.100022901415)); +#5394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5395 = ORIENTED_EDGE('',*,*,#5396,.F.); +#5396 = EDGE_CURVE('',#3178,#5376,#5397,.T.); +#5397 = SURFACE_CURVE('',#5398,(#5402,#5408),.PCURVE_S1.); +#5398 = LINE('',#5399,#5400); +#5399 = CARTESIAN_POINT('',(5.359322901415,84.770495599932,-27.3351)); +#5400 = VECTOR('',#5401,1.); +#5401 = DIRECTION('',(-5.134781489103E-16,1.,0.)); +#5402 = PCURVE('',#3193,#5403); +#5403 = DEFINITIONAL_REPRESENTATION('',(#5404),#5407); +#5404 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5405,#5406),.UNSPECIFIED.,.F., + .F.,(2,2),(13.150912876983,13.979504400068),.PIECEWISE_BEZIER_KNOTS.); +#5405 = CARTESIAN_POINT('',(10.100166447075,21.130417277052)); +#5406 = CARTESIAN_POINT('',(10.100166447075,21.959008800137)); +#5407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5408 = PCURVE('',#3289,#5409); +#5409 = DEFINITIONAL_REPRESENTATION('',(#5410),#5413); +#5410 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5411,#5412),.UNSPECIFIED.,.F., + .F.,(2,2),(13.150912876983,13.979504400068),.PIECEWISE_BEZIER_KNOTS.); +#5411 = CARTESIAN_POINT('',(3.100022901415,5.171408476915)); +#5412 = CARTESIAN_POINT('',(3.100022901415,6.)); +#5413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5414 = ORIENTED_EDGE('',*,*,#3175,.F.); +#5415 = ORIENTED_EDGE('',*,*,#3303,.F.); +#5416 = ORIENTED_EDGE('',*,*,#3352,.F.); +#5417 = ORIENTED_EDGE('',*,*,#5418,.F.); +#5418 = EDGE_CURVE('',#5419,#3353,#5421,.T.); +#5419 = VERTEX_POINT('',#5420); +#5420 = CARTESIAN_POINT('',(5.359322901415,103.15,-27.3351)); +#5421 = SURFACE_CURVE('',#5422,(#5426,#5432),.PCURVE_S1.); +#5422 = LINE('',#5423,#5424); +#5423 = CARTESIAN_POINT('',(5.359322901415,89.970495599932,-27.3351)); +#5424 = VECTOR('',#5425,1.); +#5425 = DIRECTION('',(-5.134781489103E-16,1.,0.)); +#5426 = PCURVE('',#3193,#5427); +#5427 = DEFINITIONAL_REPRESENTATION('',(#5428),#5431); +#5428 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5429,#5430),.UNSPECIFIED.,.F., + .F.,(2,2),(13.179504400068,14.050912876984),.PIECEWISE_BEZIER_KNOTS.); +#5429 = CARTESIAN_POINT('',(10.100166447075,26.359008800137)); +#5430 = CARTESIAN_POINT('',(10.100166447075,27.230417277052)); +#5431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5432 = PCURVE('',#3390,#5433); +#5433 = DEFINITIONAL_REPRESENTATION('',(#5434),#5437); +#5434 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5435,#5436),.UNSPECIFIED.,.F., + .F.,(2,2),(13.179504400068,14.050912876984),.PIECEWISE_BEZIER_KNOTS.); +#5435 = CARTESIAN_POINT('',(3.100022901415,0.)); +#5436 = CARTESIAN_POINT('',(3.100022901415,0.871408476915)); +#5437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5438 = ORIENTED_EDGE('',*,*,#5439,.T.); +#5439 = EDGE_CURVE('',#5419,#3456,#5440,.T.); +#5440 = SURFACE_CURVE('',#5441,(#5445,#5451),.PCURVE_S1.); +#5441 = LINE('',#5442,#5443); +#5442 = CARTESIAN_POINT('',(5.359322901415,103.15,-38.88518322353)); +#5443 = VECTOR('',#5444,1.); +#5444 = DIRECTION('',(-4.660627617663E-16,0.,-1.)); +#5445 = PCURVE('',#3193,#5446); +#5446 = DEFINITIONAL_REPRESENTATION('',(#5447),#5450); +#5447 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5448,#5449),.UNSPECIFIED.,.F., + .F.,(2,2),(-11.55008322353,-8.499916776462),.PIECEWISE_BEZIER_KNOTS.); +#5448 = CARTESIAN_POINT('',(10.100166447075,26.359008800137)); +#5449 = CARTESIAN_POINT('',(7.05,26.359008800137)); +#5450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5451 = PCURVE('',#3560,#5452); +#5452 = DEFINITIONAL_REPRESENTATION('',(#5453),#5456); +#5453 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5454,#5455),.UNSPECIFIED.,.F., + .F.,(2,2),(-11.55008322353,-8.499916776462),.PIECEWISE_BEZIER_KNOTS.); +#5454 = CARTESIAN_POINT('',(13.,3.100022901415)); +#5455 = CARTESIAN_POINT('',(9.949833552924,3.100022901415)); +#5456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5457 = ADVANCED_FACE('',(#5458),#3289,.T.); +#5458 = FACE_BOUND('',#5459,.T.); +#5459 = EDGE_LOOP('',(#5460,#5483,#5484,#5485)); +#5460 = ORIENTED_EDGE('',*,*,#5461,.F.); +#5461 = EDGE_CURVE('',#5376,#5462,#5464,.T.); +#5462 = VERTEX_POINT('',#5463); +#5463 = CARTESIAN_POINT('',(7.2593,98.75,-27.3351)); +#5464 = SURFACE_CURVE('',#5465,(#5469,#5476),.PCURVE_S1.); +#5465 = LINE('',#5466,#5467); +#5466 = CARTESIAN_POINT('',(2.2593,98.75,-27.3351)); +#5467 = VECTOR('',#5468,1.); +#5468 = DIRECTION('',(1.,0.,0.)); +#5469 = PCURVE('',#3289,#5470); +#5470 = DEFINITIONAL_REPRESENTATION('',(#5471),#5475); +#5471 = LINE('',#5472,#5473); +#5472 = CARTESIAN_POINT('',(0.,6.)); +#5473 = VECTOR('',#5474,1.); +#5474 = DIRECTION('',(1.,0.)); +#5475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5476 = PCURVE('',#3493,#5477); +#5477 = DEFINITIONAL_REPRESENTATION('',(#5478),#5482); +#5478 = LINE('',#5479,#5480); +#5479 = CARTESIAN_POINT('',(13.,0.)); +#5480 = VECTOR('',#5481,1.); +#5481 = DIRECTION('',(0.,1.)); +#5482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5483 = ORIENTED_EDGE('',*,*,#5396,.F.); +#5484 = ORIENTED_EDGE('',*,*,#3276,.T.); +#5485 = ORIENTED_EDGE('',*,*,#5486,.T.); +#5486 = EDGE_CURVE('',#3251,#5462,#5487,.T.); +#5487 = SURFACE_CURVE('',#5488,(#5492,#5499),.PCURVE_S1.); +#5488 = LINE('',#5489,#5490); +#5489 = CARTESIAN_POINT('',(7.2593,92.75,-27.3351)); +#5490 = VECTOR('',#5491,1.); +#5491 = DIRECTION('',(0.,1.,0.)); +#5492 = PCURVE('',#3289,#5493); +#5493 = DEFINITIONAL_REPRESENTATION('',(#5494),#5498); +#5494 = LINE('',#5495,#5496); +#5495 = CARTESIAN_POINT('',(5.,0.)); +#5496 = VECTOR('',#5497,1.); +#5497 = DIRECTION('',(0.,1.)); +#5498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5499 = PCURVE('',#3265,#5500); +#5500 = DEFINITIONAL_REPRESENTATION('',(#5501),#5505); +#5501 = LINE('',#5502,#5503); +#5502 = CARTESIAN_POINT('',(13.,0.)); +#5503 = VECTOR('',#5504,1.); +#5504 = DIRECTION('',(0.,-1.)); +#5505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5506 = ADVANCED_FACE('',(#5507),#3265,.T.); +#5507 = FACE_BOUND('',#5508,.T.); +#5508 = EDGE_LOOP('',(#5509,#5510,#5511,#5512)); +#5509 = ORIENTED_EDGE('',*,*,#5486,.F.); +#5510 = ORIENTED_EDGE('',*,*,#3250,.T.); +#5511 = ORIENTED_EDGE('',*,*,#3504,.T.); +#5512 = ORIENTED_EDGE('',*,*,#5513,.T.); +#5513 = EDGE_CURVE('',#3479,#5462,#5514,.T.); +#5514 = SURFACE_CURVE('',#5515,(#5519,#5526),.PCURVE_S1.); +#5515 = LINE('',#5516,#5517); +#5516 = CARTESIAN_POINT('',(7.2593,98.75,-40.3351)); +#5517 = VECTOR('',#5518,1.); +#5518 = DIRECTION('',(0.,0.,1.)); +#5519 = PCURVE('',#3265,#5520); +#5520 = DEFINITIONAL_REPRESENTATION('',(#5521),#5525); +#5521 = LINE('',#5522,#5523); +#5522 = CARTESIAN_POINT('',(0.,-6.)); +#5523 = VECTOR('',#5524,1.); +#5524 = DIRECTION('',(1.,0.)); +#5525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5526 = PCURVE('',#3493,#5527); +#5527 = DEFINITIONAL_REPRESENTATION('',(#5528),#5532); +#5528 = LINE('',#5529,#5530); +#5529 = CARTESIAN_POINT('',(0.,5.)); +#5530 = VECTOR('',#5531,1.); +#5531 = DIRECTION('',(1.,0.)); +#5532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5533 = ADVANCED_FACE('',(#5534),#3416,.T.); +#5534 = FACE_BOUND('',#5535,.T.); +#5535 = EDGE_LOOP('',(#5536,#5559,#5560,#5561)); +#5536 = ORIENTED_EDGE('',*,*,#5537,.F.); +#5537 = EDGE_CURVE('',#3527,#5538,#5540,.T.); +#5538 = VERTEX_POINT('',#5539); +#5539 = CARTESIAN_POINT('',(7.2593,103.15,-27.3351)); +#5540 = SURFACE_CURVE('',#5541,(#5545,#5552),.PCURVE_S1.); +#5541 = LINE('',#5542,#5543); +#5542 = CARTESIAN_POINT('',(7.2593,103.15,-40.3351)); +#5543 = VECTOR('',#5544,1.); +#5544 = DIRECTION('',(0.,0.,1.)); +#5545 = PCURVE('',#3416,#5546); +#5546 = DEFINITIONAL_REPRESENTATION('',(#5547),#5551); +#5547 = LINE('',#5548,#5549); +#5548 = CARTESIAN_POINT('',(0.,0.)); +#5549 = VECTOR('',#5550,1.); +#5550 = DIRECTION('',(1.,0.)); +#5551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5552 = PCURVE('',#3560,#5553); +#5553 = DEFINITIONAL_REPRESENTATION('',(#5554),#5558); +#5554 = LINE('',#5555,#5556); +#5555 = CARTESIAN_POINT('',(0.,5.)); +#5556 = VECTOR('',#5557,1.); +#5557 = DIRECTION('',(1.,0.)); +#5558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5559 = ORIENTED_EDGE('',*,*,#3526,.T.); +#5560 = ORIENTED_EDGE('',*,*,#3401,.T.); +#5561 = ORIENTED_EDGE('',*,*,#5562,.F.); +#5562 = EDGE_CURVE('',#5538,#3376,#5563,.T.); +#5563 = SURFACE_CURVE('',#5564,(#5568,#5575),.PCURVE_S1.); +#5564 = LINE('',#5565,#5566); +#5565 = CARTESIAN_POINT('',(7.2593,103.15,-27.3351)); +#5566 = VECTOR('',#5567,1.); +#5567 = DIRECTION('',(0.,1.,0.)); +#5568 = PCURVE('',#3416,#5569); +#5569 = DEFINITIONAL_REPRESENTATION('',(#5570),#5574); +#5570 = LINE('',#5571,#5572); +#5571 = CARTESIAN_POINT('',(13.,0.)); +#5572 = VECTOR('',#5573,1.); +#5573 = DIRECTION('',(0.,-1.)); +#5574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5575 = PCURVE('',#3390,#5576); +#5576 = DEFINITIONAL_REPRESENTATION('',(#5577),#5581); +#5577 = LINE('',#5578,#5579); +#5578 = CARTESIAN_POINT('',(5.,0.)); +#5579 = VECTOR('',#5580,1.); +#5580 = DIRECTION('',(0.,1.)); +#5581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5582 = ADVANCED_FACE('',(#5583),#3390,.T.); +#5583 = FACE_BOUND('',#5584,.T.); +#5584 = EDGE_LOOP('',(#5585,#5586,#5607,#5608)); +#5585 = ORIENTED_EDGE('',*,*,#5418,.F.); +#5586 = ORIENTED_EDGE('',*,*,#5587,.T.); +#5587 = EDGE_CURVE('',#5419,#5538,#5588,.T.); +#5588 = SURFACE_CURVE('',#5589,(#5593,#5600),.PCURVE_S1.); +#5589 = LINE('',#5590,#5591); +#5590 = CARTESIAN_POINT('',(2.2593,103.15,-27.3351)); +#5591 = VECTOR('',#5592,1.); +#5592 = DIRECTION('',(1.,0.,0.)); +#5593 = PCURVE('',#3390,#5594); +#5594 = DEFINITIONAL_REPRESENTATION('',(#5595),#5599); +#5595 = LINE('',#5596,#5597); +#5596 = CARTESIAN_POINT('',(0.,0.)); +#5597 = VECTOR('',#5598,1.); +#5598 = DIRECTION('',(1.,0.)); +#5599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5600 = PCURVE('',#3560,#5601); +#5601 = DEFINITIONAL_REPRESENTATION('',(#5602),#5606); +#5602 = LINE('',#5603,#5604); +#5603 = CARTESIAN_POINT('',(13.,0.)); +#5604 = VECTOR('',#5605,1.); +#5605 = DIRECTION('',(0.,1.)); +#5606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5607 = ORIENTED_EDGE('',*,*,#5562,.T.); +#5608 = ORIENTED_EDGE('',*,*,#3375,.T.); +#5609 = ADVANCED_FACE('',(#5610),#3560,.F.); +#5610 = FACE_BOUND('',#5611,.F.); +#5611 = EDGE_LOOP('',(#5612,#5613,#5614,#5615)); +#5612 = ORIENTED_EDGE('',*,*,#5537,.F.); +#5613 = ORIENTED_EDGE('',*,*,#3547,.T.); +#5614 = ORIENTED_EDGE('',*,*,#5439,.F.); +#5615 = ORIENTED_EDGE('',*,*,#5587,.T.); +#5616 = ADVANCED_FACE('',(#5617),#3493,.T.); +#5617 = FACE_BOUND('',#5618,.T.); +#5618 = EDGE_LOOP('',(#5619,#5620,#5621,#5622)); +#5619 = ORIENTED_EDGE('',*,*,#5513,.F.); +#5620 = ORIENTED_EDGE('',*,*,#3478,.T.); +#5621 = ORIENTED_EDGE('',*,*,#5375,.F.); +#5622 = ORIENTED_EDGE('',*,*,#5461,.T.); +#5623 = ADVANCED_FACE('',(#5624),#3688,.F.); +#5624 = FACE_BOUND('',#5625,.F.); +#5625 = EDGE_LOOP('',(#5626,#5649,#5650,#5671,#5672,#5673)); +#5626 = ORIENTED_EDGE('',*,*,#5627,.T.); +#5627 = EDGE_CURVE('',#5628,#4102,#5630,.T.); +#5628 = VERTEX_POINT('',#5629); +#5629 = CARTESIAN_POINT('',(1.773019401168,97.507423396209, + -21.83519304586)); +#5630 = SURFACE_CURVE('',#5631,(#5635,#5642),.PCURVE_S1.); +#5631 = LINE('',#5632,#5633); +#5632 = CARTESIAN_POINT('',(1.959499999963,97.507306861793, + -21.83526644707)); +#5633 = VECTOR('',#5634,1.); +#5634 = DIRECTION('',(1.,-7.690607409862E-17,1.152780867537E-15)); +#5635 = PCURVE('',#3688,#5636); +#5636 = DEFINITIONAL_REPRESENTATION('',(#5637),#5641); +#5637 = LINE('',#5638,#5639); +#5638 = CARTESIAN_POINT('',(1.00872652379,3.330669073875E-15)); +#5639 = VECTOR('',#5640,1.); +#5640 = DIRECTION('',(0.,-1.)); +#5641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5642 = PCURVE('',#4117,#5643); +#5643 = DEFINITIONAL_REPRESENTATION('',(#5644),#5648); +#5644 = LINE('',#5645,#5646); +#5645 = CARTESIAN_POINT('',(-3.464101615135,-2.200092949363)); +#5646 = VECTOR('',#5647,1.); +#5647 = DIRECTION('',(-5.921189464667E-15,-1.)); +#5648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5649 = ORIENTED_EDGE('',*,*,#4129,.T.); +#5650 = ORIENTED_EDGE('',*,*,#5651,.T.); +#5651 = EDGE_CURVE('',#4130,#3644,#5652,.T.); +#5652 = SURFACE_CURVE('',#5653,(#5657,#5664),.PCURVE_S1.); +#5653 = LINE('',#5654,#5655); +#5654 = CARTESIAN_POINT('',(1.959499999963,104.43551009206, + -21.83526644707)); +#5655 = VECTOR('',#5656,1.); +#5656 = DIRECTION('',(-1.,7.690607409862E-17,-1.152780867537E-15)); +#5657 = PCURVE('',#3688,#5658); +#5658 = DEFINITIONAL_REPRESENTATION('',(#5659),#5663); +#5659 = LINE('',#5660,#5661); +#5660 = CARTESIAN_POINT('',(2.1328661298,3.774758283726E-15)); +#5661 = VECTOR('',#5662,1.); +#5662 = DIRECTION('',(0.,1.)); +#5663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5664 = PCURVE('',#3739,#5665); +#5665 = DEFINITIONAL_REPRESENTATION('',(#5666),#5670); +#5666 = LINE('',#5667,#5668); +#5667 = CARTESIAN_POINT('',(3.464101615138,-2.200092949363)); +#5668 = VECTOR('',#5669,1.); +#5669 = DIRECTION('',(5.921189464667E-15,1.)); +#5670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5671 = ORIENTED_EDGE('',*,*,#3643,.T.); +#5672 = ORIENTED_EDGE('',*,*,#4758,.T.); +#5673 = ORIENTED_EDGE('',*,*,#5674,.T.); +#5674 = EDGE_CURVE('',#4759,#5628,#5675,.T.); +#5675 = SURFACE_CURVE('',#5676,(#5687,#5716),.PCURVE_S1.); +#5676 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#5677,#5678,#5679,#5680,#5681, + #5682,#5683,#5684,#5685,#5686),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,4),( + 1.46025696061,1.460265800592,1.567455205471,1.674644610351, + 1.699895298444),.UNSPECIFIED.); +#5677 = CARTESIAN_POINT('',(-0.240592800216,98.593562109653, + -21.2858163354)); +#5678 = CARTESIAN_POINT('',(-0.240563333427,98.593562110788, + -21.28581633495)); +#5679 = CARTESIAN_POINT('',(-0.24053386673,98.593562111356, + -21.28581633473)); +#5680 = CARTESIAN_POINT('',(0.11679361614,98.593562111356, + -21.28581633473)); +#5681 = CARTESIAN_POINT('',(0.487759327668,98.504548045907, + -21.31885905619)); +#5682 = CARTESIAN_POINT('',(1.14096670112,98.174575742592, + -21.46497815492)); +#5683 = CARTESIAN_POINT('',(1.422802553855,97.93423384725, + -21.58124218595)); +#5684 = CARTESIAN_POINT('',(1.683261757032,97.626692959812, + -21.76144401013)); +#5685 = CARTESIAN_POINT('',(1.72959943132,97.567297520827, + -21.79748395533)); +#5686 = CARTESIAN_POINT('',(1.773015630252,97.507426741179, + -21.83519094446)); +#5687 = PCURVE('',#3688,#5688); +#5688 = DEFINITIONAL_REPRESENTATION('',(#5689),#5715); +#5689 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#5690,#5691,#5692,#5693,#5694, + #5695,#5696,#5697,#5698,#5699,#5700,#5701,#5702,#5703,#5704,#5705, + #5706,#5707,#5708,#5709,#5710,#5711,#5712,#5713,#5714), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (1.46025696061,1.47114961233,1.48204226405,1.49293491577, + 1.503827567489,1.514720219209,1.525612870929,1.536505522648, + 1.547398174368,1.558290826088,1.569183477808,1.580076129527, + 1.590968781247,1.601861432967,1.612754084686,1.623646736406, + 1.634539388126,1.645432039845,1.656324691565,1.667217343285, + 1.678109995005,1.689002646724,1.699895298444), + .QUASI_UNIFORM_KNOTS.); +#5690 = CARTESIAN_POINT('',(1.196279899659,2.200092800179)); +#5691 = CARTESIAN_POINT('',(1.196280143861,2.163784189903)); +#5692 = CARTESIAN_POINT('',(1.195978987837,2.090884585221)); +#5693 = CARTESIAN_POINT('',(1.194631635267,1.981053407221)); +#5694 = CARTESIAN_POINT('',(1.192397997186,1.871105839277)); +#5695 = CARTESIAN_POINT('',(1.189287342633,1.761407263752)); +#5696 = CARTESIAN_POINT('',(1.185308836846,1.652323061411)); +#5697 = CARTESIAN_POINT('',(1.180471513434,1.544218618079)); +#5698 = CARTESIAN_POINT('',(1.174784274361,1.437459300939)); +#5699 = CARTESIAN_POINT('',(1.168255876183,1.33241054669)); +#5700 = CARTESIAN_POINT('',(1.160895044909,1.2294375326)); +#5701 = CARTESIAN_POINT('',(1.152710183878,1.128906404151)); +#5702 = CARTESIAN_POINT('',(1.14371036334,1.031180793534)); +#5703 = CARTESIAN_POINT('',(1.133960894256,0.936419197875)); +#5704 = CARTESIAN_POINT('',(1.123524495184,0.844788838986)); +#5705 = CARTESIAN_POINT('',(1.112464333732,0.756454678634)); +#5706 = CARTESIAN_POINT('',(1.100843141148,0.671581994079)); +#5707 = CARTESIAN_POINT('',(1.088723477869,0.590337060656)); +#5708 = CARTESIAN_POINT('',(1.076167186752,0.512881845903)); +#5709 = CARTESIAN_POINT('',(1.063236819265,0.439394550475)); +#5710 = CARTESIAN_POINT('',(1.04998987401,0.369992750354)); +#5711 = CARTESIAN_POINT('',(1.036499728141,0.305020287094)); +#5712 = CARTESIAN_POINT('',(1.022761616444,0.243754449921)); +#5713 = CARTESIAN_POINT('',(1.013444997996,0.205229081243)); +#5714 = CARTESIAN_POINT('',(1.008748319892,0.186484369711)); +#5715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5716 = PCURVE('',#4622,#5717); +#5717 = DEFINITIONAL_REPRESENTATION('',(#5718),#5744); +#5718 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#5719,#5720,#5721,#5722,#5723, + #5724,#5725,#5726,#5727,#5728,#5729,#5730,#5731,#5732,#5733,#5734, + #5735,#5736,#5737,#5738,#5739,#5740,#5741,#5742,#5743), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (1.46025696061,1.47114961233,1.48204226405,1.49293491577, + 1.503827567489,1.514720219209,1.525612870929,1.536505522648, + 1.547398174368,1.558290826088,1.569183477808,1.580076129527, + 1.590968781247,1.601861432967,1.612754084686,1.623646736406, + 1.634539388126,1.645432039845,1.656324691565,1.667217343285, + 1.678109995005,1.689002646724,1.699895298444), + .QUASI_UNIFORM_KNOTS.); +#5719 = CARTESIAN_POINT('',(4.712344161073,5.408764117778E-02)); +#5720 = CARTESIAN_POINT('',(4.730751642719,5.408598651946E-02)); +#5721 = CARTESIAN_POINT('',(4.767714288288,5.47283773226E-02)); +#5722 = CARTESIAN_POINT('',(4.823518429898,5.772411677643E-02)); +#5723 = CARTESIAN_POINT('',(4.879604625899,6.285268485659E-02)); +#5724 = CARTESIAN_POINT('',(4.935878115951,7.019507823416E-02)); +#5725 = CARTESIAN_POINT('',(4.992237923941,7.981828215489E-02)); +#5726 = CARTESIAN_POINT('',(5.048579178283,9.177267688915E-02)); +#5727 = CARTESIAN_POINT('',(5.10479763058,0.10609361796)); +#5728 = CARTESIAN_POINT('',(5.160794141774,0.122796826312)); +#5729 = CARTESIAN_POINT('',(5.216476718341,0.141896649792)); +#5730 = CARTESIAN_POINT('',(5.271770986213,0.163341245259)); +#5731 = CARTESIAN_POINT('',(5.326595516116,0.187272605125)); +#5732 = CARTESIAN_POINT('',(5.380867080702,0.213738046389)); +#5733 = CARTESIAN_POINT('',(5.434488647836,0.24269597273)); +#5734 = CARTESIAN_POINT('',(5.487346207778,0.274107554943)); +#5735 = CARTESIAN_POINT('',(5.539316065245,0.307910467846)); +#5736 = CARTESIAN_POINT('',(5.590268588117,0.344024370705)); +#5737 = CARTESIAN_POINT('',(5.640075351052,0.382350528899)); +#5738 = CARTESIAN_POINT('',(5.688604608276,0.42276627545)); +#5739 = CARTESIAN_POINT('',(5.735757160585,0.465148954199)); +#5740 = CARTESIAN_POINT('',(5.781348362637,0.50928977901)); +#5741 = CARTESIAN_POINT('',(5.825652850924,0.555285830613)); +#5742 = CARTESIAN_POINT('',(5.854379015619,0.587192549332)); +#5743 = CARTESIAN_POINT('',(5.868561144319,0.603462250244)); +#5744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5745 = ADVANCED_FACE('',(#5746),#3739,.F.); +#5746 = FACE_BOUND('',#5747,.F.); +#5747 = EDGE_LOOP('',(#5748,#5749,#5750)); +#5748 = ORIENTED_EDGE('',*,*,#5651,.F.); +#5749 = ORIENTED_EDGE('',*,*,#4157,.T.); +#5750 = ORIENTED_EDGE('',*,*,#3722,.T.); +#5751 = ADVANCED_FACE('',(#5752),#4089,.F.); +#5752 = FACE_BOUND('',#5753,.T.); +#5753 = EDGE_LOOP('',(#5754,#5780,#5781,#5782)); +#5754 = ORIENTED_EDGE('',*,*,#5755,.F.); +#5755 = EDGE_CURVE('',#4074,#4423,#5756,.T.); +#5756 = SURFACE_CURVE('',#5757,(#5762,#5773),.PCURVE_S1.); +#5757 = CIRCLE('',#5758,2.199924494299); +#5758 = AXIS2_PLACEMENT_3D('',#5759,#5760,#5761); +#5759 = CARTESIAN_POINT('',(-0.240504400126,96.621196029952, + -21.83519094137)); +#5760 = DIRECTION('',(4.037313198712E-15,4.037313198712E-15,-1.)); +#5761 = DIRECTION('',(-5.787866968465E-15,1.,4.037313198712E-15)); +#5762 = PCURVE('',#4089,#5763); +#5763 = DEFINITIONAL_REPRESENTATION('',(#5764),#5772); +#5764 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5765,#5766,#5767,#5768, +#5769,#5770,#5771),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5765 = CARTESIAN_POINT('',(-2.150287952678,-8.854927414571E-05)); +#5766 = CARTESIAN_POINT('',(-2.150287952678,-3.810469546215)); +#5767 = CARTESIAN_POINT('',(-5.450174694126,-1.905279047745)); +#5768 = CARTESIAN_POINT('',(-8.750061435574,-8.854927414588E-05)); +#5769 = CARTESIAN_POINT('',(-5.450174694126,1.905101949196)); +#5770 = CARTESIAN_POINT('',(-2.150287952678,3.810292447667)); +#5771 = CARTESIAN_POINT('',(-2.150287952678,-8.854927414571E-05)); +#5772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5773 = PCURVE('',#4622,#5774); +#5774 = DEFINITIONAL_REPRESENTATION('',(#5775),#5779); +#5775 = LINE('',#5776,#5777); +#5776 = CARTESIAN_POINT('',(4.712388980385,0.603462247149)); +#5777 = VECTOR('',#5778,1.); +#5778 = DIRECTION('',(1.,2.651066504398E-14)); +#5779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5780 = ORIENTED_EDGE('',*,*,#4073,.F.); +#5781 = ORIENTED_EDGE('',*,*,#5320,.F.); +#5782 = ORIENTED_EDGE('',*,*,#4422,.F.); +#5783 = ADVANCED_FACE('',(#5784),#4117,.F.); +#5784 = FACE_BOUND('',#5785,.F.); +#5785 = EDGE_LOOP('',(#5786,#5787,#5788)); +#5786 = ORIENTED_EDGE('',*,*,#4101,.T.); +#5787 = ORIENTED_EDGE('',*,*,#5627,.F.); +#5788 = ORIENTED_EDGE('',*,*,#5789,.T.); +#5789 = EDGE_CURVE('',#5628,#4074,#5790,.T.); +#5790 = SURFACE_CURVE('',#5791,(#5796,#5807),.PCURVE_S1.); +#5791 = CIRCLE('',#5792,2.199924494299); +#5792 = AXIS2_PLACEMENT_3D('',#5793,#5794,#5795); +#5793 = CARTESIAN_POINT('',(-0.240504400126,96.621196029952, + -21.83519094137)); +#5794 = DIRECTION('',(4.037313198712E-15,4.037313198712E-15,-1.)); +#5795 = DIRECTION('',(-5.787866968465E-15,1.,4.037313198712E-15)); +#5796 = PCURVE('',#4117,#5797); +#5797 = DEFINITIONAL_REPRESENTATION('',(#5798),#5806); +#5798 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5799,#5800,#5801,#5802, +#5803,#5804,#5805),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5799 = CARTESIAN_POINT('',(-2.150287952678,-8.854927414571E-05)); +#5800 = CARTESIAN_POINT('',(-2.150287952678,-3.810469546215)); +#5801 = CARTESIAN_POINT('',(-5.450174694126,-1.905279047745)); +#5802 = CARTESIAN_POINT('',(-8.750061435574,-8.854927414588E-05)); +#5803 = CARTESIAN_POINT('',(-5.450174694126,1.905101949196)); +#5804 = CARTESIAN_POINT('',(-2.150287952678,3.810292447667)); +#5805 = CARTESIAN_POINT('',(-2.150287952678,-8.854927414571E-05)); +#5806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5807 = PCURVE('',#4622,#5808); +#5808 = DEFINITIONAL_REPRESENTATION('',(#5809),#5813); +#5809 = LINE('',#5810,#5811); +#5810 = CARTESIAN_POINT('',(4.712388980385,0.603462247149)); +#5811 = VECTOR('',#5812,1.); +#5812 = DIRECTION('',(1.,2.647018195942E-14)); +#5813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5814 = ADVANCED_FACE('',(#5815),#4288,.F.); +#5815 = FACE_BOUND('',#5816,.F.); +#5816 = EDGE_LOOP('',(#5817,#5840,#5841,#5842)); +#5817 = ORIENTED_EDGE('',*,*,#5818,.T.); +#5818 = EDGE_CURVE('',#5819,#4272,#5821,.T.); +#5819 = VERTEX_POINT('',#5820); +#5820 = CARTESIAN_POINT('',(5.059322901416,100.97140847692, + -25.83526644707)); +#5821 = SEAM_CURVE('',#5822,(#5826,#5833),.PCURVE_S1.); +#5822 = LINE('',#5823,#5824); +#5823 = CARTESIAN_POINT('',(0.959322901415,100.97140847692, + -25.83526644707)); +#5824 = VECTOR('',#5825,1.); +#5825 = DIRECTION('',(-1.,-5.134781489213E-16,4.660627617663E-16)); +#5826 = PCURVE('',#4288,#5827); +#5827 = DEFINITIONAL_REPRESENTATION('',(#5828),#5832); +#5828 = LINE('',#5829,#5830); +#5829 = CARTESIAN_POINT('',(3.14159265359,0.)); +#5830 = VECTOR('',#5831,1.); +#5831 = DIRECTION('',(0.,1.)); +#5832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5833 = PCURVE('',#4288,#5834); +#5834 = DEFINITIONAL_REPRESENTATION('',(#5835),#5839); +#5835 = LINE('',#5836,#5837); +#5836 = CARTESIAN_POINT('',(-3.14159265359,0.)); +#5837 = VECTOR('',#5838,1.); +#5838 = DIRECTION('',(0.,1.)); +#5839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5840 = ORIENTED_EDGE('',*,*,#4271,.T.); +#5841 = ORIENTED_EDGE('',*,*,#5818,.F.); +#5842 = ORIENTED_EDGE('',*,*,#5843,.F.); +#5843 = EDGE_CURVE('',#5819,#5819,#5844,.T.); +#5844 = SURFACE_CURVE('',#5845,(#5850,#5857),.PCURVE_S1.); +#5845 = CIRCLE('',#5846,1.5); +#5846 = AXIS2_PLACEMENT_3D('',#5847,#5848,#5849); +#5847 = CARTESIAN_POINT('',(5.059322901416,100.97140847692, + -27.33526644707)); +#5848 = DIRECTION('',(1.,-5.828670879206E-16,-1.272038209669E-29)); +#5849 = DIRECTION('',(9.460211681263E-31,2.344686043875E-14,-1.)); +#5850 = PCURVE('',#4288,#5851); +#5851 = DEFINITIONAL_REPRESENTATION('',(#5852),#5856); +#5852 = LINE('',#5853,#5854); +#5853 = CARTESIAN_POINT('',(6.28318530718,-4.1)); +#5854 = VECTOR('',#5855,1.); +#5855 = DIRECTION('',(-1.,0.)); +#5856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5857 = PCURVE('',#5858,#5863); +#5858 = PLANE('',#5859); +#5859 = AXIS2_PLACEMENT_3D('',#5860,#5861,#5862); +#5860 = CARTESIAN_POINT('',(5.059322901416,100.97140847692, + -27.33526644707)); +#5861 = DIRECTION('',(1.,-5.828670879206E-16,-1.272038209669E-29)); +#5862 = DIRECTION('',(5.828670879206E-16,1.,2.346507503525E-14)); +#5863 = DEFINITIONAL_REPRESENTATION('',(#5864),#5868); +#5864 = CIRCLE('',#5865,1.5); +#5865 = AXIS2_PLACEMENT_2D('',#5866,#5867); +#5866 = CARTESIAN_POINT('',(-1.175442172031E-26,-5.009326287109E-13)); +#5867 = DIRECTION('',(-1.82145964977E-17,-1.)); +#5868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5869 = ADVANCED_FACE('',(#5870),#4510,.F.); +#5870 = FACE_BOUND('',#5871,.T.); +#5871 = EDGE_LOOP('',(#5872,#5873,#5874,#5900)); +#5872 = ORIENTED_EDGE('',*,*,#4861,.T.); +#5873 = ORIENTED_EDGE('',*,*,#4707,.F.); +#5874 = ORIENTED_EDGE('',*,*,#5875,.T.); +#5875 = EDGE_CURVE('',#4685,#4495,#5876,.T.); +#5876 = SURFACE_CURVE('',#5877,(#5882,#5893),.PCURVE_S1.); +#5877 = CIRCLE('',#5878,2.7); +#5878 = AXIS2_PLACEMENT_3D('',#5879,#5880,#5881); +#5879 = CARTESIAN_POINT('',(-0.240504400127,96.621196029945, + -9.735266447075)); +#5880 = DIRECTION('',(1.020968391343E-16,7.205881598494E-17,-1.)); +#5881 = DIRECTION('',(1.,-2.405626300207E-29,1.020968391343E-16)); +#5882 = PCURVE('',#4510,#5883); +#5883 = DEFINITIONAL_REPRESENTATION('',(#5884),#5892); +#5884 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5885,#5886,#5887,#5888, +#5889,#5890,#5891),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5885 = CARTESIAN_POINT('',(-4.315019446977,0.349869450726)); +#5886 = CARTESIAN_POINT('',(-8.991556627413,0.349869450726)); +#5887 = CARTESIAN_POINT('',(-6.653288037195,4.399869450726)); +#5888 = CARTESIAN_POINT('',(-4.315019446977,8.449869450726)); +#5889 = CARTESIAN_POINT('',(-1.976750856759,4.399869450726)); +#5890 = CARTESIAN_POINT('',(0.361517733458,0.349869450726)); +#5891 = CARTESIAN_POINT('',(-4.315019446977,0.349869450726)); +#5892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5893 = PCURVE('',#4538,#5894); +#5894 = DEFINITIONAL_REPRESENTATION('',(#5895),#5899); +#5895 = LINE('',#5896,#5897); +#5896 = CARTESIAN_POINT('',(2.6645352591E-14,-1.1)); +#5897 = VECTOR('',#5898,1.); +#5898 = DIRECTION('',(1.,-1.696260474238E-15)); +#5899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5900 = ORIENTED_EDGE('',*,*,#4494,.F.); +#5901 = ADVANCED_FACE('',(#5902),#4538,.F.); +#5902 = FACE_BOUND('',#5903,.F.); +#5903 = EDGE_LOOP('',(#5904,#5930,#5931,#5932)); +#5904 = ORIENTED_EDGE('',*,*,#5905,.F.); +#5905 = EDGE_CURVE('',#4662,#4523,#5906,.T.); +#5906 = SURFACE_CURVE('',#5907,(#5912,#5919),.PCURVE_S1.); +#5907 = CIRCLE('',#5908,2.7); +#5908 = AXIS2_PLACEMENT_3D('',#5909,#5910,#5911); +#5909 = CARTESIAN_POINT('',(-0.240504400127,96.621196029945, + -19.83526644707)); +#5910 = DIRECTION('',(1.020968391343E-16,7.205881598492E-17,-1.)); +#5911 = DIRECTION('',(1.,-2.406536121318E-29,1.020968391343E-16)); +#5912 = PCURVE('',#4538,#5913); +#5913 = DEFINITIONAL_REPRESENTATION('',(#5914),#5918); +#5914 = LINE('',#5915,#5916); +#5915 = CARTESIAN_POINT('',(4.440892098501E-15,9.)); +#5916 = VECTOR('',#5917,1.); +#5917 = DIRECTION('',(1.,-1.130840316158E-15)); +#5918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5919 = PCURVE('',#4566,#5920); +#5920 = DEFINITIONAL_REPRESENTATION('',(#5921),#5929); +#5921 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5922,#5923,#5924,#5925, +#5926,#5927,#5928),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5922 = CARTESIAN_POINT('',(-4.350212446983,-2.700088549273)); +#5923 = CARTESIAN_POINT('',(-9.026749627418,-2.700088549273)); +#5924 = CARTESIAN_POINT('',(-6.6884810372,1.349911450727)); +#5925 = CARTESIAN_POINT('',(-4.350212446982,5.399911450727)); +#5926 = CARTESIAN_POINT('',(-2.011943856765,1.349911450727)); +#5927 = CARTESIAN_POINT('',(0.326324733453,-2.700088549273)); +#5928 = CARTESIAN_POINT('',(-4.350212446983,-2.700088549273)); +#5929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5930 = ORIENTED_EDGE('',*,*,#4684,.T.); +#5931 = ORIENTED_EDGE('',*,*,#5875,.T.); +#5932 = ORIENTED_EDGE('',*,*,#4522,.T.); +#5933 = ADVANCED_FACE('',(#5934),#4566,.T.); +#5934 = FACE_BOUND('',#5935,.T.); +#5935 = EDGE_LOOP('',(#5936,#5937,#5959,#5960)); +#5936 = ORIENTED_EDGE('',*,*,#4659,.F.); +#5937 = ORIENTED_EDGE('',*,*,#5938,.F.); +#5938 = EDGE_CURVE('',#4551,#4660,#5939,.T.); +#5939 = SURFACE_CURVE('',#5940,(#5945,#5952),.PCURVE_S1.); +#5940 = CIRCLE('',#5941,1.7); +#5941 = AXIS2_PLACEMENT_3D('',#5942,#5943,#5944); +#5942 = CARTESIAN_POINT('',(-0.240504400126,96.621196029952, + -19.83526644707)); +#5943 = DIRECTION('',(-6.906312354633E-17,-3.602940798569E-17,1.)); +#5944 = DIRECTION('',(-5.844283390569E-15,1.,3.602940798569E-17)); +#5945 = PCURVE('',#4566,#5946); +#5946 = DEFINITIONAL_REPRESENTATION('',(#5947),#5951); +#5947 = CIRCLE('',#5948,1.7); +#5948 = AXIS2_PLACEMENT_2D('',#5949,#5950); +#5949 = CARTESIAN_POINT('',(-4.350212446976,-8.854927389813E-05)); +#5950 = DIRECTION('',(1.,5.828670879206E-16)); +#5951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5952 = PCURVE('',#4594,#5953); +#5953 = DEFINITIONAL_REPRESENTATION('',(#5954),#5958); +#5954 = LINE('',#5955,#5956); +#5955 = CARTESIAN_POINT('',(10.995574287564,-1.)); +#5956 = VECTOR('',#5957,1.); +#5957 = DIRECTION('',(-1.,6.784958709406E-15)); +#5958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5959 = ORIENTED_EDGE('',*,*,#4550,.F.); +#5960 = ORIENTED_EDGE('',*,*,#5905,.F.); +#5961 = ADVANCED_FACE('',(#5962),#4594,.F.); +#5962 = FACE_BOUND('',#5963,.F.); +#5963 = EDGE_LOOP('',(#5964,#5965,#5966,#5967)); +#5964 = ORIENTED_EDGE('',*,*,#4831,.T.); +#5965 = ORIENTED_EDGE('',*,*,#5938,.F.); +#5966 = ORIENTED_EDGE('',*,*,#4578,.F.); +#5967 = ORIENTED_EDGE('',*,*,#5968,.T.); +#5968 = EDGE_CURVE('',#4579,#4787,#5969,.T.); +#5969 = SURFACE_CURVE('',#5970,(#5975,#5982),.PCURVE_S1.); +#5970 = CIRCLE('',#5971,1.7); +#5971 = AXIS2_PLACEMENT_3D('',#5972,#5973,#5974); +#5972 = CARTESIAN_POINT('',(-0.240504400126,96.621196029952, + -20.62826644707)); +#5973 = DIRECTION('',(-1.152780867537E-15,-5.701506641247E-15,1.)); +#5974 = DIRECTION('',(-5.844283390569E-15,1.,5.701506641247E-15)); +#5975 = PCURVE('',#4594,#5976); +#5976 = DEFINITIONAL_REPRESENTATION('',(#5977),#5981); +#5977 = LINE('',#5978,#5979); +#5978 = CARTESIAN_POINT('',(10.995574287564,-0.207)); +#5979 = VECTOR('',#5980,1.); +#5980 = DIRECTION('',(-1.,0.)); +#5981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5982 = PCURVE('',#4622,#5983); +#5983 = DEFINITIONAL_REPRESENTATION('',(#5984),#5988); +#5984 = LINE('',#5985,#5986); +#5985 = CARTESIAN_POINT('',(10.995574287564,-0.60346224715)); +#5986 = VECTOR('',#5987,1.); +#5987 = DIRECTION('',(-1.,-9.794507000865E-17)); +#5988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5989 = ADVANCED_FACE('',(#5990),#4622,.F.); +#5990 = FACE_BOUND('',#5991,.F.); +#5991 = EDGE_LOOP('',(#5992,#5993,#5994,#5995,#5996,#5997)); +#5992 = ORIENTED_EDGE('',*,*,#4786,.F.); +#5993 = ORIENTED_EDGE('',*,*,#5968,.F.); +#5994 = ORIENTED_EDGE('',*,*,#4606,.F.); +#5995 = ORIENTED_EDGE('',*,*,#5755,.F.); +#5996 = ORIENTED_EDGE('',*,*,#5789,.F.); +#5997 = ORIENTED_EDGE('',*,*,#5674,.F.); +#5998 = ADVANCED_FACE('',(#5999),#4930,.T.); +#5999 = FACE_BOUND('',#6000,.F.); +#6000 = EDGE_LOOP('',(#6001,#6002,#6003,#6004)); +#6001 = ORIENTED_EDGE('',*,*,#5135,.T.); +#6002 = ORIENTED_EDGE('',*,*,#5108,.T.); +#6003 = ORIENTED_EDGE('',*,*,#4909,.F.); +#6004 = ORIENTED_EDGE('',*,*,#6005,.F.); +#6005 = EDGE_CURVE('',#5136,#4910,#6006,.T.); +#6006 = SURFACE_CURVE('',#6007,(#6011,#6018),.PCURVE_S1.); +#6007 = LINE('',#6008,#6009); +#6008 = CARTESIAN_POINT('',(2.2593,81.1862,-29.0351)); +#6009 = VECTOR('',#6010,1.); +#6010 = DIRECTION('',(1.,0.,0.)); +#6011 = PCURVE('',#4930,#6012); +#6012 = DEFINITIONAL_REPRESENTATION('',(#6013),#6017); +#6013 = LINE('',#6014,#6015); +#6014 = CARTESIAN_POINT('',(-0.,0.)); +#6015 = VECTOR('',#6016,1.); +#6016 = DIRECTION('',(-0.,1.)); +#6017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6018 = PCURVE('',#4958,#6019); +#6019 = DEFINITIONAL_REPRESENTATION('',(#6020),#6024); +#6020 = LINE('',#6021,#6022); +#6021 = CARTESIAN_POINT('',(11.3,0.)); +#6022 = VECTOR('',#6023,1.); +#6023 = DIRECTION('',(0.,1.)); +#6024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6025 = ADVANCED_FACE('',(#6026),#4958,.F.); +#6026 = FACE_BOUND('',#6027,.F.); +#6027 = EDGE_LOOP('',(#6028,#6029,#6050,#6051)); +#6028 = ORIENTED_EDGE('',*,*,#4942,.F.); +#6029 = ORIENTED_EDGE('',*,*,#6030,.F.); +#6030 = EDGE_CURVE('',#5164,#4943,#6031,.T.); +#6031 = SURFACE_CURVE('',#6032,(#6036,#6043),.PCURVE_S1.); +#6032 = LINE('',#6033,#6034); +#6033 = CARTESIAN_POINT('',(2.2593,81.1862,-38.6351)); +#6034 = VECTOR('',#6035,1.); +#6035 = DIRECTION('',(1.,0.,0.)); +#6036 = PCURVE('',#4958,#6037); +#6037 = DEFINITIONAL_REPRESENTATION('',(#6038),#6042); +#6038 = LINE('',#6039,#6040); +#6039 = CARTESIAN_POINT('',(1.7,0.)); +#6040 = VECTOR('',#6041,1.); +#6041 = DIRECTION('',(0.,1.)); +#6042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6043 = PCURVE('',#4987,#6044); +#6044 = DEFINITIONAL_REPRESENTATION('',(#6045),#6049); +#6045 = LINE('',#6046,#6047); +#6046 = CARTESIAN_POINT('',(0.,0.)); +#6047 = VECTOR('',#6048,1.); +#6048 = DIRECTION('',(0.,1.)); +#6049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6050 = ORIENTED_EDGE('',*,*,#5163,.T.); +#6051 = ORIENTED_EDGE('',*,*,#6005,.T.); +#6052 = ADVANCED_FACE('',(#6053),#4987,.T.); +#6053 = FACE_BOUND('',#6054,.T.); +#6054 = EDGE_LOOP('',(#6055,#6056,#6077,#6078)); +#6055 = ORIENTED_EDGE('',*,*,#5186,.T.); +#6056 = ORIENTED_EDGE('',*,*,#6057,.T.); +#6057 = EDGE_CURVE('',#5187,#4971,#6058,.T.); +#6058 = SURFACE_CURVE('',#6059,(#6063,#6070),.PCURVE_S1.); +#6059 = LINE('',#6060,#6061); +#6060 = CARTESIAN_POINT('',(2.2593,82.8862,-40.3351)); +#6061 = VECTOR('',#6062,1.); +#6062 = DIRECTION('',(1.,0.,0.)); +#6063 = PCURVE('',#4987,#6064); +#6064 = DEFINITIONAL_REPRESENTATION('',(#6065),#6069); +#6065 = LINE('',#6066,#6067); +#6066 = CARTESIAN_POINT('',(1.570796326795,0.)); +#6067 = VECTOR('',#6068,1.); +#6068 = DIRECTION('',(0.,1.)); +#6069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6070 = PCURVE('',#5015,#6071); +#6071 = DEFINITIONAL_REPRESENTATION('',(#6072),#6076); +#6072 = LINE('',#6073,#6074); +#6073 = CARTESIAN_POINT('',(0.,-9.8638)); +#6074 = VECTOR('',#6075,1.); +#6075 = DIRECTION('',(1.,0.)); +#6076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6077 = ORIENTED_EDGE('',*,*,#4970,.F.); +#6078 = ORIENTED_EDGE('',*,*,#6030,.F.); +#6079 = ADVANCED_FACE('',(#6080),#5015,.F.); +#6080 = FACE_BOUND('',#6081,.F.); +#6081 = EDGE_LOOP('',(#6082,#6083,#6084,#6085)); +#6082 = ORIENTED_EDGE('',*,*,#5210,.T.); +#6083 = ORIENTED_EDGE('',*,*,#6057,.T.); +#6084 = ORIENTED_EDGE('',*,*,#4999,.T.); +#6085 = ORIENTED_EDGE('',*,*,#5348,.F.); +#6086 = ADVANCED_FACE('',(#6087),#5070,.F.); +#6087 = FACE_BOUND('',#6088,.F.); +#6088 = EDGE_LOOP('',(#6089,#6112,#6113,#6114)); +#6089 = ORIENTED_EDGE('',*,*,#6090,.T.); +#6090 = EDGE_CURVE('',#6091,#5054,#6093,.T.); +#6091 = VERTEX_POINT('',#6092); +#6092 = CARTESIAN_POINT('',(5.0593,88.1862,-31.4851)); +#6093 = SEAM_CURVE('',#6094,(#6098,#6105),.PCURVE_S1.); +#6094 = LINE('',#6095,#6096); +#6095 = CARTESIAN_POINT('',(2.0093,88.1862,-31.4851)); +#6096 = VECTOR('',#6097,1.); +#6097 = DIRECTION('',(1.,0.,0.)); +#6098 = PCURVE('',#5070,#6099); +#6099 = DEFINITIONAL_REPRESENTATION('',(#6100),#6104); +#6100 = LINE('',#6101,#6102); +#6101 = CARTESIAN_POINT('',(6.28318530718,-0.)); +#6102 = VECTOR('',#6103,1.); +#6103 = DIRECTION('',(0.,1.)); +#6104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6105 = PCURVE('',#5070,#6106); +#6106 = DEFINITIONAL_REPRESENTATION('',(#6107),#6111); +#6107 = LINE('',#6108,#6109); +#6108 = CARTESIAN_POINT('',(0.,-0.)); +#6109 = VECTOR('',#6110,1.); +#6110 = DIRECTION('',(0.,1.)); +#6111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6112 = ORIENTED_EDGE('',*,*,#5053,.F.); +#6113 = ORIENTED_EDGE('',*,*,#6090,.F.); +#6114 = ORIENTED_EDGE('',*,*,#6115,.T.); +#6115 = EDGE_CURVE('',#6091,#6091,#6116,.T.); +#6116 = SURFACE_CURVE('',#6117,(#6122,#6129),.PCURVE_S1.); +#6117 = CIRCLE('',#6118,2.35); +#6118 = AXIS2_PLACEMENT_3D('',#6119,#6120,#6121); +#6119 = CARTESIAN_POINT('',(5.0593,88.1862,-33.8351)); +#6120 = DIRECTION('',(1.,0.,0.)); +#6121 = DIRECTION('',(-0.,0.,1.)); +#6122 = PCURVE('',#5070,#6123); +#6123 = DEFINITIONAL_REPRESENTATION('',(#6124),#6128); +#6124 = LINE('',#6125,#6126); +#6125 = CARTESIAN_POINT('',(0.,3.05)); +#6126 = VECTOR('',#6127,1.); +#6127 = DIRECTION('',(1.,0.)); +#6128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6129 = PCURVE('',#6130,#6135); +#6130 = PLANE('',#6131); +#6131 = AXIS2_PLACEMENT_3D('',#6132,#6133,#6134); +#6132 = CARTESIAN_POINT('',(5.0593,88.1862,-33.8351)); +#6133 = DIRECTION('',(1.,0.,0.)); +#6134 = DIRECTION('',(-0.,0.,1.)); +#6135 = DEFINITIONAL_REPRESENTATION('',(#6136),#6140); +#6136 = CIRCLE('',#6137,2.35); +#6137 = AXIS2_PLACEMENT_2D('',#6138,#6139); +#6138 = CARTESIAN_POINT('',(0.,0.)); +#6139 = DIRECTION('',(1.,0.)); +#6140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6141 = ADVANCED_FACE('',(#6142),#5276,.F.); +#6142 = FACE_BOUND('',#6143,.F.); +#6143 = EDGE_LOOP('',(#6144,#6167,#6189,#6190)); +#6144 = ORIENTED_EDGE('',*,*,#6145,.T.); +#6145 = EDGE_CURVE('',#5260,#6146,#6148,.T.); +#6146 = VERTEX_POINT('',#6147); +#6147 = CARTESIAN_POINT('',(5.0593,88.1862,-29.3351)); +#6148 = SEAM_CURVE('',#6149,(#6153,#6160),.PCURVE_S1.); +#6149 = LINE('',#6150,#6151); +#6150 = CARTESIAN_POINT('',(2.0093,88.1862,-29.3351)); +#6151 = VECTOR('',#6152,1.); +#6152 = DIRECTION('',(1.,0.,0.)); +#6153 = PCURVE('',#5276,#6154); +#6154 = DEFINITIONAL_REPRESENTATION('',(#6155),#6159); +#6155 = LINE('',#6156,#6157); +#6156 = CARTESIAN_POINT('',(6.28318530718,-0.)); +#6157 = VECTOR('',#6158,1.); +#6158 = DIRECTION('',(0.,1.)); +#6159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6160 = PCURVE('',#5276,#6161); +#6161 = DEFINITIONAL_REPRESENTATION('',(#6162),#6166); +#6162 = LINE('',#6163,#6164); +#6163 = CARTESIAN_POINT('',(0.,-0.)); +#6164 = VECTOR('',#6165,1.); +#6165 = DIRECTION('',(0.,1.)); +#6166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6167 = ORIENTED_EDGE('',*,*,#6168,.F.); +#6168 = EDGE_CURVE('',#6146,#6146,#6169,.T.); +#6169 = SURFACE_CURVE('',#6170,(#6175,#6182),.PCURVE_S1.); +#6170 = CIRCLE('',#6171,4.5); +#6171 = AXIS2_PLACEMENT_3D('',#6172,#6173,#6174); +#6172 = CARTESIAN_POINT('',(5.0593,88.1862,-33.8351)); +#6173 = DIRECTION('',(1.,0.,0.)); +#6174 = DIRECTION('',(-0.,0.,1.)); +#6175 = PCURVE('',#5276,#6176); +#6176 = DEFINITIONAL_REPRESENTATION('',(#6177),#6181); +#6177 = LINE('',#6178,#6179); +#6178 = CARTESIAN_POINT('',(0.,3.05)); +#6179 = VECTOR('',#6180,1.); +#6180 = DIRECTION('',(1.,0.)); +#6181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6182 = PCURVE('',#6130,#6183); +#6183 = DEFINITIONAL_REPRESENTATION('',(#6184),#6188); +#6184 = CIRCLE('',#6185,4.5); +#6185 = AXIS2_PLACEMENT_2D('',#6186,#6187); +#6186 = CARTESIAN_POINT('',(0.,0.)); +#6187 = DIRECTION('',(1.,0.)); +#6188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6189 = ORIENTED_EDGE('',*,*,#6145,.F.); +#6190 = ORIENTED_EDGE('',*,*,#5259,.T.); +#6191 = ADVANCED_FACE('',(#6192),#5858,.F.); +#6192 = FACE_BOUND('',#6193,.T.); +#6193 = EDGE_LOOP('',(#6194)); +#6194 = ORIENTED_EDGE('',*,*,#5843,.F.); +#6195 = ADVANCED_FACE('',(#6196,#6199),#6130,.F.); +#6196 = FACE_BOUND('',#6197,.F.); +#6197 = EDGE_LOOP('',(#6198)); +#6198 = ORIENTED_EDGE('',*,*,#6168,.T.); +#6199 = FACE_BOUND('',#6200,.F.); +#6200 = EDGE_LOOP('',(#6201)); +#6201 = ORIENTED_EDGE('',*,*,#6115,.F.); +#6202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#6206)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#6203,#6204,#6205)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#6203 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#6204 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#6205 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#6206 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-05),#6203, + 'distance_accuracy_value','confusion accuracy'); +#6207 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +ENDSEC; +END-ISO-10303-21; diff --git a/hardware/plastics/v1.2.2/curtain/make_mount_spacers.py b/hardware/plastics/v1.2.2/curtain/make_mount_spacers.py new file mode 100644 index 0000000..e121100 --- /dev/null +++ b/hardware/plastics/v1.2.2/curtain/make_mount_spacers.py @@ -0,0 +1,144 @@ +import argparse +import re +from decimal import Decimal +from pathlib import Path + +import cadquery as cq + + +HERE = Path(__file__).resolve().parent + +INCH = Decimal("25.4") +NUMBER_9_CLEARANCE_DIAMETER = 5.0 +CORNER_RADIUS_RATIO = 0.45 +EDGE_SLOT_LENGTH = 10.0 +EDGE_SLOT_SIZE = 2.0 +EDGE_SLOT_HOOK_DEPTH = 2.0 +EPSILON = 0.1 + + +def parse_thickness(value): + match = re.fullmatch(r"\s*(\d+(?:\.\d+)?|\.\d+)\s*(in|mm)\s*", value, re.I) + if match is None: + raise argparse.ArgumentTypeError("thickness must be a positive value like 1.5in or 38mm") + + amount = Decimal(match.group(1)) + if amount <= 0: + raise argparse.ArgumentTypeError("thickness must be greater than zero") + + unit = match.group(2).lower() + label = f"{format(amount.normalize(), 'f')}{unit}" + thickness_mm = float(amount * INCH if unit == "in" else amount) + return thickness_mm, label + + +def edge_slot(edge, center, thickness_mm): + # In the side/top cross-section, cut a diagonal stripe where + # EDGE_SLOT_HOOK_DEPTH <= inward + downward <= depth + size. This leaves + # the outer corner intact as a triangular rope-retaining hook. + depth = EDGE_SLOT_HOOK_DEPTH + size = EDGE_SLOT_SIZE + profile = ( + cq.Workplane("YZ") + .polyline( + ( + (depth + EPSILON, thickness_mm + EPSILON), + (depth + size + EPSILON, thickness_mm + EPSILON), + (-EPSILON, thickness_mm - depth - size - EPSILON), + (-EPSILON, thickness_mm - depth - EPSILON), + ) + ) + .close() + .extrude(EDGE_SLOT_LENGTH) + ) + if edge == "y_min": + return profile.translate((center - EDGE_SLOT_LENGTH / 2, 0, 0)) + if edge == "x_min": + return profile.translate((-EDGE_SLOT_LENGTH / 2, 0, 0)).rotate( + (0, 0, 0), (0, 0, 1), -90 + ).translate((0, center, 0)) + raise ValueError(f"Unsupported slot edge: {edge}") + + +def make_spacer(name, length, width, hole_centers, thickness_mm, slot=None): + corner_radius = min(length, width) * CORNER_RADIUS_RATIO + spacer = ( + cq.Workplane("XY") + .box( + length, + width, + thickness_mm, + centered=(False, False, False), + ) + .edges("|Z") + .fillet(corner_radius) + ) + + for x, y in hole_centers: + hole = ( + cq.Workplane("XY") + .center(x, y) + .circle(NUMBER_9_CLEARANCE_DIAMETER / 2) + .extrude(thickness_mm) + ) + spacer = spacer.cut(hole) + + if slot is not None: + spacer = spacer.cut(edge_slot(*slot, thickness_mm)) + + step_path = HERE / f"{name}.step" + stl_path = HERE / f"{name}.stl" + cq.exporters.export(spacer, str(step_path)) + cq.exporters.export( + spacer, + str(stl_path), + tolerance=0.03, + angularTolerance=0.1, + ) + return step_path, stl_path + + +def make_pulley_spacer(thickness_mm, label): + # Match the complete pulley bottom's 39.5 x 32.6 mm YZ footprint, not just + # the narrow paired mounting pads. The hole centers remain 25.5 mm apart. + return make_spacer( + f"end-pulley-ceiling-spacer-{label}", + length=39.5, + width=32.6, + hole_centers=((7.0, 6.5), (32.5, 6.5)), + thickness_mm=thickness_mm, + slot=("y_min", 19.75), + ) + + +def make_elbow_spacer(thickness_mm, label): + # Match the complete elbow's 51.4343 x 41.9 mm XY footprint. In this local + # orientation X follows the elbow's original X axis and Y follows its + # paired mounting-hole direction. + return make_spacer( + f"rope-elbow-ceiling-spacer-{label}", + length=51.4343, + width=41.9, + hole_centers=((20.9905, 6.0), (20.9905, 35.9)), + thickness_mm=thickness_mm, + slot=("x_min", 20.95), + ) + + +if __name__ == "__main__": + parser = argparse.ArgumentParser(description="Generate ceiling mount spacers.") + parser.add_argument( + "thickness", + nargs="?", + default="1.5in", + type=parse_thickness, + help="spacer thickness with unit, such as 1.5in or 38mm (default: 1.5in)", + ) + args = parser.parse_args() + thickness_mm, label = args.thickness + for paths in ( + make_pulley_spacer(thickness_mm, label), + make_elbow_spacer(thickness_mm, label), + ): + for path in paths: + print(path) diff --git a/hardware/plastics/v1.2.2/curtain/rope-elbow-top-ceiling-mount.step b/hardware/plastics/v1.2.2/curtain/rope-elbow-top-ceiling-mount.step new file mode 100644 index 0000000..bd8ed85 --- /dev/null +++ b/hardware/plastics/v1.2.2/curtain/rope-elbow-top-ceiling-mount.step @@ -0,0 +1,9422 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('Open CASCADE Model'),'2;1'); +FILE_NAME('Open CASCADE Shape Model','2026-07-19T09:10:59',('Author'),( + 'Open CASCADE'),'Open CASCADE STEP processor 7.7','Open CASCADE 7.7' + ,'Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('Open CASCADE STEP translator 7.7 7', + 'Open CASCADE STEP translator 7.7 7','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#7124); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.,0.,0.)); +#13 = DIRECTION('',(0.,0.,1.)); +#14 = DIRECTION('',(1.,0.,-0.)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#922,#1003,#1108,#1162,#1267,#1321,#1501, + #1676,#2044,#2196,#2625,#2674,#2827,#2855,#3347,#3455,#3483,#3586, + #3911,#3965,#3992,#4031,#4089,#4143,#4170,#4561,#4666,#4812,#4885, + #4939,#4988,#5042,#5188,#5238,#5382,#5624,#5673,#5705,#5737,#5919, + #5948,#5977,#5984,#6011,#6016,#6043,#6148,#6197,#6275,#6322,#6351, + #6401,#6408,#6522,#6549,#6576,#6583,#6642,#6649,#6768,#6822,#6909, + #6936,#6990,#6997,#7004,#7063,#7117)); +#17 = ADVANCED_FACE('',(#18),#33,.F.); +#18 = FACE_BOUND('',#19,.T.); +#19 = EDGE_LOOP('',(#20,#79,#181,#233,#261,#313,#415,#467,#496,#681,#709 + ,#896)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-36.0562288002,39.237690372727,10.164733552925 + )); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-36.05622880009,39.23768887808,10.664733552926 + )); +#26 = SURFACE_CURVE('',#27,(#32,#66),.PCURVE_S1.); +#27 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28,#29,#30,#31),.UNSPECIFIED.,.F. + ,.F.,(4,4),(0.,4.970657068115E-02),.PIECEWISE_BEZIER_KNOTS.); +#28 = CARTESIAN_POINT('',(-36.05622880009,39.237690372727, + 10.164733552926)); +#29 = CARTESIAN_POINT('',(-36.05622880009,39.237690372727, + 10.330422121863)); +#30 = CARTESIAN_POINT('',(-36.05622880009,39.237690882097, + 10.497119911974)); +#31 = CARTESIAN_POINT('',(-36.05622880009,39.23768887808,10.664733552926 + )); +#32 = PCURVE('',#33,#38); +#33 = TOROIDAL_SURFACE('',#34,44.,2.7); +#34 = AXIS2_PLACEMENT_3D('',#35,#36,#37); +#35 = CARTESIAN_POINT('',(7.943771349938,36.537690372728,10.164733552926 + )); +#36 = DIRECTION('',(1.839280640444E-15,-1.,-1.822212228845E-14)); +#37 = DIRECTION('',(-0.707106781173,1.158441842468E-14,-0.7071067812)); +#38 = DEFINITIONAL_REPRESENTATION('',(#39),#65); +#39 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#40,#41,#42,#43,#44,#45,#46,#47, + #48,#49,#50,#51,#52,#53,#54,#55,#56,#57,#58,#59,#60,#61,#62,#63,#64) + ,.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4) + ,(0.,2.259389576416E-03,4.518779152832E-03,6.778168729248E-03, + 9.037558305664E-03,1.129694788208E-02,1.35563374585E-02, + 1.581572703491E-02,1.807511661133E-02,2.033450618774E-02, + 2.259389576416E-02,2.485328534057E-02,2.711267491699E-02, + 2.937206449341E-02,3.163145406982E-02,3.389084364624E-02, + 3.615023322265E-02,3.840962279907E-02,4.066901237549E-02, + 4.29284019519E-02,4.518779152832E-02,4.744718110473E-02, + 4.970657068115E-02),.QUASI_UNIFORM_KNOTS.); +#40 = CARTESIAN_POINT('',(-7.068583470596,-1.570796271229)); +#41 = CARTESIAN_POINT('',(-7.068754636472,-1.570796271232)); +#42 = CARTESIAN_POINT('',(-7.069097063006,-1.570794838892)); +#43 = CARTESIAN_POINT('',(-7.06961098568,-1.570788386263)); +#44 = CARTESIAN_POINT('',(-7.07012518976,-1.570777622428)); +#45 = CARTESIAN_POINT('',(-7.070639673778,-1.570762540349)); +#46 = CARTESIAN_POINT('',(-7.071154436263,-1.570743133026)); +#47 = CARTESIAN_POINT('',(-7.071669475746,-1.5707193935)); +#48 = CARTESIAN_POINT('',(-7.072184790754,-1.57069131485)); +#49 = CARTESIAN_POINT('',(-7.072700379817,-1.570658890196)); +#50 = CARTESIAN_POINT('',(-7.073216241459,-1.570622112699)); +#51 = CARTESIAN_POINT('',(-7.073732374208,-1.570580975557)); +#52 = CARTESIAN_POINT('',(-7.074248776589,-1.570535472012)); +#53 = CARTESIAN_POINT('',(-7.074765447126,-1.570485595341)); +#54 = CARTESIAN_POINT('',(-7.075282384343,-1.570431338866)); +#55 = CARTESIAN_POINT('',(-7.075799586761,-1.570372695947)); +#56 = CARTESIAN_POINT('',(-7.076317052904,-1.570309659984)); +#57 = CARTESIAN_POINT('',(-7.076834781292,-1.570242224419)); +#58 = CARTESIAN_POINT('',(-7.077352770445,-1.570170382733)); +#59 = CARTESIAN_POINT('',(-7.077871018883,-1.570094128448)); +#60 = CARTESIAN_POINT('',(-7.078389525124,-1.570013455126)); +#61 = CARTESIAN_POINT('',(-7.078908287687,-1.569928356372)); +#62 = CARTESIAN_POINT('',(-7.079427305088,-1.569838825827)); +#63 = CARTESIAN_POINT('',(-7.079773485591,-1.569776180067)); +#64 = CARTESIAN_POINT('',(-7.079946617822,-1.569744116452)); +#65 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#66 = PCURVE('',#67,#72); +#67 = PLANE('',#68); +#68 = AXIS2_PLACEMENT_3D('',#69,#70,#71); +#69 = CARTESIAN_POINT('',(-36.05622880001,43.23689152307,10.164733552925 + )); +#70 = DIRECTION('',(1.,-1.962809366573E-11,-1.743324921375E-25)); +#71 = DIRECTION('',(1.962809366573E-11,1.,2.442490654279E-15)); +#72 = DEFINITIONAL_REPRESENTATION('',(#73),#78); +#73 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#74,#75,#76,#77),.UNSPECIFIED.,.F. + ,.F.,(4,4),(0.,4.970657068115E-02),.PIECEWISE_BEZIER_KNOTS.); +#74 = CARTESIAN_POINT('',(-3.999201150343,1.008970684779E-12)); +#75 = CARTESIAN_POINT('',(-3.999201150343,0.165688568938)); +#76 = CARTESIAN_POINT('',(-3.999200640973,0.332386359049)); +#77 = CARTESIAN_POINT('',(-3.99920264499,0.500000000001)); +#78 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#79 = ORIENTED_EDGE('',*,*,#80,.F.); +#80 = EDGE_CURVE('',#81,#24,#83,.T.); +#81 = VERTEX_POINT('',#82); +#82 = CARTESIAN_POINT('',(-36.0562288002,33.837691867375,10.664733552926 + )); +#83 = SURFACE_CURVE('',#84,(#103,#154),.PCURVE_S1.); +#84 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85,#86,#87,#88,#89,#90,#91,#92, + #93,#94,#95,#96,#97,#98,#99,#100,#101,#102),.UNSPECIFIED.,.F.,.F.,(4 + ,2,2,2,2,2,2,2,4),(1.199903185781,1.299592518761,1.399562301036, + 1.499528308304,1.599491384496,1.699454460687,1.799420467955, + 1.89939025023,1.999079583221),.UNSPECIFIED.); +#85 = CARTESIAN_POINT('',(-36.0562288002,33.837691867375,10.664733552926 + )); +#86 = CARTESIAN_POINT('',(-36.38885956424,33.838041842453, + 10.664733552926)); +#87 = CARTESIAN_POINT('',(-36.7797166421,33.91606423724,10.664733552926) + ); +#88 = CARTESIAN_POINT('',(-37.39458972022,34.170744016715, + 10.664733552926)); +#89 = CARTESIAN_POINT('',(-37.72708170946,34.392898006064, + 10.664733552926)); +#90 = CARTESIAN_POINT('',(-38.1983432307,34.864142835264,10.664733552926 + )); +#91 = CARTESIAN_POINT('',(-38.42050243097,35.196613182033, + 10.664733552926)); +#92 = CARTESIAN_POINT('',(-38.67554147902,35.812311484506, + 10.664733552926)); +#93 = CARTESIAN_POINT('',(-38.75355191382,36.204480118756, + 10.664733552926)); +#94 = CARTESIAN_POINT('',(-38.75355191382,36.870900626699, + 10.664733552926)); +#95 = CARTESIAN_POINT('',(-38.67554147902,37.263069260949, + 10.664733552926)); +#96 = CARTESIAN_POINT('',(-38.42050243097,37.878767563422, + 10.664733552926)); +#97 = CARTESIAN_POINT('',(-38.1983432307,38.211237910191,10.664733552926 + )); +#98 = CARTESIAN_POINT('',(-37.72708170946,38.682482739391, + 10.664733552926)); +#99 = CARTESIAN_POINT('',(-37.39458972022,38.90463672874,10.664733552926 + )); +#100 = CARTESIAN_POINT('',(-36.77971664207,39.159316508228, + 10.664733552926)); +#101 = CARTESIAN_POINT('',(-36.38885956416,39.237338903015, + 10.664733552926)); +#102 = CARTESIAN_POINT('',(-36.05622880009,39.23768887808, + 10.664733552926)); +#103 = PCURVE('',#33,#104); +#104 = DEFINITIONAL_REPRESENTATION('',(#105),#153); +#105 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#106,#107,#108,#109,#110,#111, + #112,#113,#114,#115,#116,#117,#118,#119,#120,#121,#122,#123,#124, + #125,#126,#127,#128,#129,#130,#131,#132,#133,#134,#135,#136,#137, + #138,#139,#140,#141,#142,#143,#144,#145,#146,#147,#148,#149,#150, + #151,#152),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),( + 1.199903185781,1.218066285723,1.236229385665,1.254392485606, + 1.272555585548,1.29071868549,1.308881785432,1.327044885374, + 1.345207985316,1.363371085257,1.381534185199,1.399697285141, + 1.417860385083,1.436023485025,1.454186584966,1.472349684908, + 1.49051278485,1.508675884792,1.526838984734,1.545002084676, + 1.563165184617,1.581328284559,1.599491384501,1.617654484443, + 1.635817584385,1.653980684326,1.672143784268,1.69030688421, + 1.708469984152,1.726633084094,1.744796184036,1.762959283977, + 1.781122383919,1.799285483861,1.817448583803,1.835611683745, + 1.853774783686,1.871937883628,1.89010098357,1.908264083512, + 1.926427183454,1.944590283396,1.962753383337,1.980916483279, + 1.999079583221),.QUASI_UNIFORM_KNOTS.); +#106 = CARTESIAN_POINT('',(-7.079946617822,1.569744116411)); +#107 = CARTESIAN_POINT('',(-7.079930964127,1.547311044206)); +#108 = CARTESIAN_POINT('',(-7.079898801624,1.500965301991)); +#109 = CARTESIAN_POINT('',(-7.079849326306,1.428623852395)); +#110 = CARTESIAN_POINT('',(-7.079799956174,1.355015023714)); +#111 = CARTESIAN_POINT('',(-7.079752017586,1.281906022976)); +#112 = CARTESIAN_POINT('',(-7.079706602577,1.210712535539)); +#113 = CARTESIAN_POINT('',(-7.079665491068,1.143893979964)); +#114 = CARTESIAN_POINT('',(-7.079623531052,1.072613376616)); +#115 = CARTESIAN_POINT('',(-7.079582435862,0.999463780229)); +#116 = CARTESIAN_POINT('',(-7.079543115096,0.925930222935)); +#117 = CARTESIAN_POINT('',(-7.079506440915,0.853375137094)); +#118 = CARTESIAN_POINT('',(-7.079474066803,0.784903007616)); +#119 = CARTESIAN_POINT('',(-7.079444412435,0.716329867082)); +#120 = CARTESIAN_POINT('',(-7.079415730267,0.643754590993)); +#121 = CARTESIAN_POINT('',(-7.07938932389,0.570210958135)); +#122 = CARTESIAN_POINT('',(-7.079365687821,0.497074410178)); +#123 = CARTESIAN_POINT('',(-7.079345435123,0.42585204201)); +#124 = CARTESIAN_POINT('',(-7.079329465599,0.359030069105)); +#125 = CARTESIAN_POINT('',(-7.079315761386,0.287777755438)); +#126 = CARTESIAN_POINT('',(-7.079304742914,0.214632814786)); +#127 = CARTESIAN_POINT('',(-7.079296574941,0.141092119689)); +#128 = CARTESIAN_POINT('',(-7.079291494156,6.852459876115E-02)); +#129 = CARTESIAN_POINT('',(-7.079289722836,-1.832756169051E-11)); +#130 = CARTESIAN_POINT('',(-7.079291494156,-6.852459880173E-02)); +#131 = CARTESIAN_POINT('',(-7.079296574941,-0.14109211973)); +#132 = CARTESIAN_POINT('',(-7.079304742914,-0.214632814829)); +#133 = CARTESIAN_POINT('',(-7.079315761386,-0.28777775548)); +#134 = CARTESIAN_POINT('',(-7.079329465599,-0.359030069146)); +#135 = CARTESIAN_POINT('',(-7.079345435123,-0.425852042051)); +#136 = CARTESIAN_POINT('',(-7.079365687821,-0.497074410222)); +#137 = CARTESIAN_POINT('',(-7.07938932389,-0.570210958179)); +#138 = CARTESIAN_POINT('',(-7.079415730267,-0.643754591037)); +#139 = CARTESIAN_POINT('',(-7.079444412435,-0.716329867125)); +#140 = CARTESIAN_POINT('',(-7.079474066803,-0.784903007655)); +#141 = CARTESIAN_POINT('',(-7.079506440915,-0.853375137138)); +#142 = CARTESIAN_POINT('',(-7.079543115096,-0.925930222979)); +#143 = CARTESIAN_POINT('',(-7.079582435862,-0.999463780273)); +#144 = CARTESIAN_POINT('',(-7.079623531052,-1.072613376659)); +#145 = CARTESIAN_POINT('',(-7.079665491068,-1.143893980005)); +#146 = CARTESIAN_POINT('',(-7.079706602577,-1.210712535579)); +#147 = CARTESIAN_POINT('',(-7.079752017586,-1.281906023018)); +#148 = CARTESIAN_POINT('',(-7.079799956174,-1.355015023756)); +#149 = CARTESIAN_POINT('',(-7.079849326306,-1.428623852438)); +#150 = CARTESIAN_POINT('',(-7.079898801624,-1.500965302033)); +#151 = CARTESIAN_POINT('',(-7.079930964127,-1.547311044247)); +#152 = CARTESIAN_POINT('',(-7.079946617822,-1.569744116452)); +#153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#154 = PCURVE('',#155,#160); +#155 = PLANE('',#156); +#156 = AXIS2_PLACEMENT_3D('',#157,#158,#159); +#157 = CARTESIAN_POINT('',(-38.52336880006,40.886891492734, + 10.664733552925)); +#158 = DIRECTION('',(1.230623012145E-28,-6.881608909096E-15,1.)); +#159 = DIRECTION('',(1.803187229162E-14,1.,6.881608909096E-15)); +#160 = DEFINITIONAL_REPRESENTATION('',(#161),#180); +#161 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#162,#163,#164,#165,#166,#167, + #168,#169,#170,#171,#172,#173,#174,#175,#176,#177,#178,#179), + .UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),(1.199903185781, + 1.299592518761,1.399562301036,1.499528308304,1.599491384496, + 1.699454460687,1.799420467955,1.89939025023,1.999079583221), + .UNSPECIFIED.); +#162 = CARTESIAN_POINT('',(-7.049199625359,-2.46713999986)); +#163 = CARTESIAN_POINT('',(-7.048849650281,-2.13450923582)); +#164 = CARTESIAN_POINT('',(-6.970827255494,-1.74365215796)); +#165 = CARTESIAN_POINT('',(-6.716147476019,-1.12877907984)); +#166 = CARTESIAN_POINT('',(-6.49399348667,-0.7962870906)); +#167 = CARTESIAN_POINT('',(-6.02274865747,-0.32502556936)); +#168 = CARTESIAN_POINT('',(-5.690278310701,-0.10286636909)); +#169 = CARTESIAN_POINT('',(-5.074580008228,0.15217267896)); +#170 = CARTESIAN_POINT('',(-4.682411373978,0.23018311376)); +#171 = CARTESIAN_POINT('',(-4.015990866035,0.23018311376)); +#172 = CARTESIAN_POINT('',(-3.623822231785,0.15217267896)); +#173 = CARTESIAN_POINT('',(-3.008123929312,-0.10286636909)); +#174 = CARTESIAN_POINT('',(-2.675653582543,-0.32502556936)); +#175 = CARTESIAN_POINT('',(-2.204408753343,-0.7962870906)); +#176 = CARTESIAN_POINT('',(-1.982254763994,-1.12877907984)); +#177 = CARTESIAN_POINT('',(-1.727574984506,-1.74365215799)); +#178 = CARTESIAN_POINT('',(-1.649552589719,-2.1345092359)); +#179 = CARTESIAN_POINT('',(-1.649202614654,-2.46713999997)); +#180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#181 = ORIENTED_EDGE('',*,*,#182,.T.); +#182 = EDGE_CURVE('',#81,#183,#185,.T.); +#183 = VERTEX_POINT('',#184); +#184 = CARTESIAN_POINT('',(-36.0562288002,33.837690372727, + 10.164733552925)); +#185 = SURFACE_CURVE('',#186,(#191,#220),.PCURVE_S1.); +#186 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#187,#188,#189,#190), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.151516595708,3.201223166389), + .PIECEWISE_BEZIER_KNOTS.); +#187 = CARTESIAN_POINT('',(-36.0562288002,33.837691867375, + 10.664733552926)); +#188 = CARTESIAN_POINT('',(-36.0562288002,33.837689863358, + 10.497119911974)); +#189 = CARTESIAN_POINT('',(-36.0562288002,33.837690372727, + 10.330422121863)); +#190 = CARTESIAN_POINT('',(-36.0562288002,33.837690372727, + 10.164733552926)); +#191 = PCURVE('',#33,#192); +#192 = DEFINITIONAL_REPRESENTATION('',(#193),#219); +#193 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#194,#195,#196,#197,#198,#199, + #200,#201,#202,#203,#204,#205,#206,#207,#208,#209,#210,#211,#212, + #213,#214,#215,#216,#217,#218),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(3.151516595708,3.153775985284, + 3.156035374861,3.158294764437,3.160554154014,3.16281354359, + 3.165072933166,3.167332322743,3.169591712319,3.171851101896, + 3.174110491472,3.176369881049,3.178629270625,3.180888660201, + 3.183148049778,3.185407439354,3.187666828931,3.189926218507, + 3.192185608083,3.19444499766,3.196704387236,3.198963776813, + 3.201223166389),.QUASI_UNIFORM_KNOTS.); +#194 = CARTESIAN_POINT('',(-7.079946617822,1.569744116411)); +#195 = CARTESIAN_POINT('',(-7.079773485591,1.569776180026)); +#196 = CARTESIAN_POINT('',(-7.079427305088,1.569838825786)); +#197 = CARTESIAN_POINT('',(-7.078908287687,1.569928356331)); +#198 = CARTESIAN_POINT('',(-7.078389525124,1.570013455085)); +#199 = CARTESIAN_POINT('',(-7.077871018883,1.570094128407)); +#200 = CARTESIAN_POINT('',(-7.077352770445,1.570170382692)); +#201 = CARTESIAN_POINT('',(-7.076834781292,1.570242224378)); +#202 = CARTESIAN_POINT('',(-7.076317052904,1.570309659944)); +#203 = CARTESIAN_POINT('',(-7.075799586761,1.570372695906)); +#204 = CARTESIAN_POINT('',(-7.075282384343,1.570431338825)); +#205 = CARTESIAN_POINT('',(-7.074765447126,1.5704855953)); +#206 = CARTESIAN_POINT('',(-7.074248776589,1.570535471971)); +#207 = CARTESIAN_POINT('',(-7.073732374208,1.570580975517)); +#208 = CARTESIAN_POINT('',(-7.073216241459,1.570622112658)); +#209 = CARTESIAN_POINT('',(-7.072700379817,1.570658890156)); +#210 = CARTESIAN_POINT('',(-7.072184790754,1.570691314809)); +#211 = CARTESIAN_POINT('',(-7.071669475746,1.570719393459)); +#212 = CARTESIAN_POINT('',(-7.071154436263,1.570743132985)); +#213 = CARTESIAN_POINT('',(-7.070639673778,1.570762540308)); +#214 = CARTESIAN_POINT('',(-7.07012518976,1.570777622387)); +#215 = CARTESIAN_POINT('',(-7.06961098568,1.570788386223)); +#216 = CARTESIAN_POINT('',(-7.069097063006,1.570794838851)); +#217 = CARTESIAN_POINT('',(-7.068754636472,1.570796271192)); +#218 = CARTESIAN_POINT('',(-7.068583470596,1.570796271188)); +#219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#220 = PCURVE('',#221,#226); +#221 = PLANE('',#222); +#222 = AXIS2_PLACEMENT_3D('',#223,#224,#225); +#223 = CARTESIAN_POINT('',(-36.05622880019,34.537690372729, + 10.164733552925)); +#224 = DIRECTION('',(1.,-1.962809366573E-11,-1.743324921375E-25)); +#225 = DIRECTION('',(1.962809366573E-11,1.,2.442490654279E-15)); +#226 = DEFINITIONAL_REPRESENTATION('',(#227),#232); +#227 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#228,#229,#230,#231), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.151516595708,3.201223166389), + .PIECEWISE_BEZIER_KNOTS.); +#228 = CARTESIAN_POINT('',(-0.699998505354,0.500000000001)); +#229 = CARTESIAN_POINT('',(-0.700000509371,0.332386359049)); +#230 = CARTESIAN_POINT('',(-0.700000000002,0.165688568938)); +#231 = CARTESIAN_POINT('',(-0.700000000002,1.000088900582E-12)); +#232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#233 = ORIENTED_EDGE('',*,*,#234,.T.); +#234 = EDGE_CURVE('',#183,#235,#237,.T.); +#235 = VERTEX_POINT('',#236); +#236 = CARTESIAN_POINT('',(7.943771350024,33.837690372728, + -33.83526644707)); +#237 = SURFACE_CURVE('',#238,(#243,#250),.PCURVE_S1.); +#238 = CIRCLE('',#239,44.); +#239 = AXIS2_PLACEMENT_3D('',#240,#241,#242); +#240 = CARTESIAN_POINT('',(7.943771349938,33.837690372728, + 10.164733552926)); +#241 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#242 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#243 = PCURVE('',#33,#244); +#244 = DEFINITIONAL_REPRESENTATION('',(#245),#249); +#245 = LINE('',#246,#247); +#246 = CARTESIAN_POINT('',(-10.21017612418,1.570796326795)); +#247 = VECTOR('',#248,1.); +#248 = DIRECTION('',(1.,1.102592289573E-14)); +#249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#250 = PCURVE('',#251,#256); +#251 = CYLINDRICAL_SURFACE('',#252,44.); +#252 = AXIS2_PLACEMENT_3D('',#253,#254,#255); +#253 = CARTESIAN_POINT('',(7.943771199795,31.936891185329, + 10.164733552925)); +#254 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#255 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#256 = DEFINITIONAL_REPRESENTATION('',(#257),#260); +#257 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#258,#259),.UNSPECIFIED.,.F.,.F., + (2,2),(3.14159265359,4.712388980387),.PIECEWISE_BEZIER_KNOTS.); +#258 = CARTESIAN_POINT('',(-3.14159265359,-1.900799187398)); +#259 = CARTESIAN_POINT('',(-1.570796323381,-1.900799187398)); +#260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#261 = ORIENTED_EDGE('',*,*,#262,.T.); +#262 = EDGE_CURVE('',#235,#263,#265,.T.); +#263 = VERTEX_POINT('',#264); +#264 = CARTESIAN_POINT('',(8.443771349938,33.837691867218, + -33.83526644707)); +#265 = SURFACE_CURVE('',#266,(#271,#300),.PCURVE_S1.); +#266 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#267,#268,#269,#270), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.201223252697,3.250929823383), + .PIECEWISE_BEZIER_KNOTS.); +#267 = CARTESIAN_POINT('',(7.943771349982,33.837690372728, + -33.83526644707)); +#268 = CARTESIAN_POINT('',(8.109459918935,33.837690372728, + -33.83526644707)); +#269 = CARTESIAN_POINT('',(8.27615770903,33.837689863307,-33.83526644707 + )); +#270 = CARTESIAN_POINT('',(8.443771349938,33.837691867218, + -33.83526644707)); +#271 = PCURVE('',#33,#272); +#272 = DEFINITIONAL_REPRESENTATION('',(#273),#299); +#273 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#274,#275,#276,#277,#278,#279, + #280,#281,#282,#283,#284,#285,#286,#287,#288,#289,#290,#291,#292, + #293,#294,#295,#296,#297,#298),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(3.201223252697,3.203482642274, + 3.20574203185,3.208001421427,3.210260811004,3.21252020058, + 3.214779590157,3.217038979733,3.21929836931,3.221557758887, + 3.223817148463,3.22607653804,3.228335927617,3.230595317193, + 3.23285470677,3.235114096347,3.237373485923,3.2396328755, + 3.241892265076,3.244151654653,3.24641104423,3.248670433806, + 3.250929823383),.QUASI_UNIFORM_KNOTS.); +#274 = CARTESIAN_POINT('',(-5.4977871438,1.570796326796)); +#275 = CARTESIAN_POINT('',(-5.497615977923,1.5707963268)); +#276 = CARTESIAN_POINT('',(-5.497273551389,1.570794894459)); +#277 = CARTESIAN_POINT('',(-5.496759628713,1.570788441831)); +#278 = CARTESIAN_POINT('',(-5.496245424631,1.570777677995)); +#279 = CARTESIAN_POINT('',(-5.495730940612,1.570762595916)); +#280 = CARTESIAN_POINT('',(-5.495216178124,1.570743188593)); +#281 = CARTESIAN_POINT('',(-5.49470113864,1.570719449067)); +#282 = CARTESIAN_POINT('',(-5.49418582363,1.570691370417)); +#283 = CARTESIAN_POINT('',(-5.493670234566,1.570658945763)); +#284 = CARTESIAN_POINT('',(-5.493154372921,1.570622168266)); +#285 = CARTESIAN_POINT('',(-5.49263824017,1.570581031124)); +#286 = CARTESIAN_POINT('',(-5.492121837788,1.570535527578)); +#287 = CARTESIAN_POINT('',(-5.491605167249,1.570485650907)); +#288 = CARTESIAN_POINT('',(-5.491088230031,1.570431394432)); +#289 = CARTESIAN_POINT('',(-5.490571027611,1.570372751513)); +#290 = CARTESIAN_POINT('',(-5.490053561466,1.57030971555)); +#291 = CARTESIAN_POINT('',(-5.489535833077,1.570242279985)); +#292 = CARTESIAN_POINT('',(-5.489017843922,1.570170438298)); +#293 = CARTESIAN_POINT('',(-5.488499595482,1.570094184013)); +#294 = CARTESIAN_POINT('',(-5.487981089239,1.570013510691)); +#295 = CARTESIAN_POINT('',(-5.487462326675,1.569928411936)); +#296 = CARTESIAN_POINT('',(-5.486943309272,1.569838881391)); +#297 = CARTESIAN_POINT('',(-5.486597128768,1.569776235631)); +#298 = CARTESIAN_POINT('',(-5.486423996537,1.569744172016)); +#299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#300 = PCURVE('',#301,#306); +#301 = PLANE('',#302); +#302 = AXIS2_PLACEMENT_3D('',#303,#304,#305); +#303 = CARTESIAN_POINT('',(7.943771350024,31.936891185328, + -33.83526644707)); +#304 = DIRECTION('',(-9.969802761134E-13,1.79856167953E-16,1.)); +#305 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#306 = DEFINITIONAL_REPRESENTATION('',(#307),#312); +#307 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#308,#309,#310,#311), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.201223252697,3.250929823383), + .PIECEWISE_BEZIER_KNOTS.); +#308 = CARTESIAN_POINT('',(-1.9007991874,-4.199751657552E-11)); +#309 = CARTESIAN_POINT('',(-1.9007991874,0.165688568911)); +#310 = CARTESIAN_POINT('',(-1.900798677979,0.332386359006)); +#311 = CARTESIAN_POINT('',(-1.90080068189,0.499999999914)); +#312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#313 = ORIENTED_EDGE('',*,*,#314,.F.); +#314 = EDGE_CURVE('',#315,#263,#317,.T.); +#315 = VERTEX_POINT('',#316); +#316 = CARTESIAN_POINT('',(8.443771349938,39.237688878238, + -33.83526644707)); +#317 = SURFACE_CURVE('',#318,(#337,#388),.PCURVE_S1.); +#318 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#319,#320,#321,#322,#323,#324, + #325,#326,#327,#328,#329,#330,#331,#332,#333,#334,#335,#336), + .UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),(1.199903170782, + 1.299592518761,1.399562301036,1.499528308304,1.599491384496, + 1.699454460687,1.799420467955,1.89939025023,1.99907959821), + .UNSPECIFIED.); +#319 = CARTESIAN_POINT('',(8.443771349938,39.237688878238, + -33.83526644707)); +#320 = CARTESIAN_POINT('',(8.443771349938,39.237338921621, + -34.16789724363)); +#321 = CARTESIAN_POINT('',(8.443771349938,39.159316527348, + -34.55875439292)); +#322 = CARTESIAN_POINT('',(8.443771349938,38.904636728741, + -35.17362751723)); +#323 = CARTESIAN_POINT('',(8.443771349938,38.682482739392, + -35.50611950647)); +#324 = CARTESIAN_POINT('',(8.443771349938,38.211237910191, + -35.97738102771)); +#325 = CARTESIAN_POINT('',(8.443771349938,37.878767563423, + -36.19954022798)); +#326 = CARTESIAN_POINT('',(8.443771349938,37.26306926095,-36.45457927603 + )); +#327 = CARTESIAN_POINT('',(8.443771349938,36.8709006267,-36.53258971083) + ); +#328 = CARTESIAN_POINT('',(8.443771349938,36.204480118757, + -36.53258971083)); +#329 = CARTESIAN_POINT('',(8.443771349938,35.812311484507, + -36.45457927603)); +#330 = CARTESIAN_POINT('',(8.443771349938,35.196613182034, + -36.19954022798)); +#331 = CARTESIAN_POINT('',(8.443771349938,34.864142835265, + -35.97738102771)); +#332 = CARTESIAN_POINT('',(8.443771349938,34.392898006065, + -35.50611950647)); +#333 = CARTESIAN_POINT('',(8.443771349938,34.170744016716, + -35.17362751723)); +#334 = CARTESIAN_POINT('',(8.443771349938,33.916064218108, + -34.55875439292)); +#335 = CARTESIAN_POINT('',(8.443771349938,33.838041823836, + -34.16789724363)); +#336 = CARTESIAN_POINT('',(8.443771349938,33.837691867218, + -33.83526644707)); +#337 = PCURVE('',#33,#338); +#338 = DEFINITIONAL_REPRESENTATION('',(#339),#387); +#339 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#340,#341,#342,#343,#344,#345, + #346,#347,#348,#349,#350,#351,#352,#353,#354,#355,#356,#357,#358, + #359,#360,#361,#362,#363,#364,#365,#366,#367,#368,#369,#370,#371, + #372,#373,#374,#375,#376,#377,#378,#379,#380,#381,#382,#383,#384, + #385,#386),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),( + 1.199903170782,1.218066271405,1.236229372029,1.254392472652, + 1.272555573275,1.290718673899,1.308881774522,1.327044875146, + 1.345207975769,1.363371076392,1.381534177016,1.399697277639, + 1.417860378262,1.436023478886,1.454186579509,1.472349680132, + 1.490512780756,1.508675881379,1.526838982003,1.545002082626, + 1.563165183249,1.581328283873,1.599491384496,1.617654485119, + 1.635817585743,1.653980686366,1.672143786989,1.690306887613, + 1.708469988236,1.72663308886,1.744796189483,1.762959290106, + 1.78112239073,1.799285491353,1.817448591976,1.8356116926, + 1.853774793223,1.871937893846,1.89010099447,1.908264095093, + 1.926427195717,1.94459029634,1.962753396963,1.980916497587, + 1.99907959821),.QUASI_UNIFORM_KNOTS.); +#340 = CARTESIAN_POINT('',(-5.486423996537,-1.569744172016)); +#341 = CARTESIAN_POINT('',(-5.486439650231,-1.547311100155)); +#342 = CARTESIAN_POINT('',(-5.486471812734,-1.500965358089)); +#343 = CARTESIAN_POINT('',(-5.486521288054,-1.428623907296)); +#344 = CARTESIAN_POINT('',(-5.486570658188,-1.355015076057)); +#345 = CARTESIAN_POINT('',(-5.486618596779,-1.28190607192)); +#346 = CARTESIAN_POINT('',(-5.486664011793,-1.210712579219)); +#347 = CARTESIAN_POINT('',(-5.486705123304,-1.143894021244)); +#348 = CARTESIAN_POINT('',(-5.486747083322,-1.072613417559)); +#349 = CARTESIAN_POINT('',(-5.486788178515,-0.999463818934)); +#350 = CARTESIAN_POINT('',(-5.486827499283,-0.925930258603)); +#351 = CARTESIAN_POINT('',(-5.486864173467,-0.85337516935)); +#352 = CARTESIAN_POINT('',(-5.486896547582,-0.784903034487)); +#353 = CARTESIAN_POINT('',(-5.486926201951,-0.716329894126)); +#354 = CARTESIAN_POINT('',(-5.486954884121,-0.643754615692)); +#355 = CARTESIAN_POINT('',(-5.4869812905,-0.570210980268)); +#356 = CARTESIAN_POINT('',(-5.487004926571,-0.497074429233)); +#357 = CARTESIAN_POINT('',(-5.487025179271,-0.425852057428)); +#358 = CARTESIAN_POINT('',(-5.487041148796,-0.359030082034)); +#359 = CARTESIAN_POINT('',(-5.48705485301,-0.287777766399)); +#360 = CARTESIAN_POINT('',(-5.487065871482,-0.214632823091)); +#361 = CARTESIAN_POINT('',(-5.487074039456,-0.141092125196)); +#362 = CARTESIAN_POINT('',(-5.487079120241,-6.852460139847E-02)); +#363 = CARTESIAN_POINT('',(-5.487080891561,7.229772336359E-13)); +#364 = CARTESIAN_POINT('',(-5.487079120241,6.852460140007E-02)); +#365 = CARTESIAN_POINT('',(-5.487074039456,0.141092125198)); +#366 = CARTESIAN_POINT('',(-5.487065871482,0.214632823093)); +#367 = CARTESIAN_POINT('',(-5.48705485301,0.287777766401)); +#368 = CARTESIAN_POINT('',(-5.487041148796,0.359030082037)); +#369 = CARTESIAN_POINT('',(-5.487025179271,0.425852057432)); +#370 = CARTESIAN_POINT('',(-5.48700492657,0.497074429237)); +#371 = CARTESIAN_POINT('',(-5.4869812905,0.570210980273)); +#372 = CARTESIAN_POINT('',(-5.486954884121,0.643754615696)); +#373 = CARTESIAN_POINT('',(-5.486926201951,0.716329894131)); +#374 = CARTESIAN_POINT('',(-5.486896547582,0.784903034491)); +#375 = CARTESIAN_POINT('',(-5.486864173467,0.853375169354)); +#376 = CARTESIAN_POINT('',(-5.486827499283,0.925930258607)); +#377 = CARTESIAN_POINT('',(-5.486788178515,0.999463818938)); +#378 = CARTESIAN_POINT('',(-5.486747083322,1.072613417563)); +#379 = CARTESIAN_POINT('',(-5.486705123304,1.143894021248)); +#380 = CARTESIAN_POINT('',(-5.486664011793,1.210712579223)); +#381 = CARTESIAN_POINT('',(-5.486618596779,1.281906071923)); +#382 = CARTESIAN_POINT('',(-5.486570658188,1.355015076059)); +#383 = CARTESIAN_POINT('',(-5.486521288054,1.428623907297)); +#384 = CARTESIAN_POINT('',(-5.486471812734,1.50096535809)); +#385 = CARTESIAN_POINT('',(-5.486439650231,1.547311100155)); +#386 = CARTESIAN_POINT('',(-5.486423996537,1.569744172016)); +#387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#388 = PCURVE('',#389,#394); +#389 = PLANE('',#390); +#390 = AXIS2_PLACEMENT_3D('',#391,#392,#393); +#391 = CARTESIAN_POINT('',(8.443771349935,36.537690372728, + -35.13526644707)); +#392 = DIRECTION('',(1.,4.927146840776E-16,1.389172905939E-16)); +#393 = DIRECTION('',(4.927146840776E-16,-1.,1.552111978096E-14)); +#394 = DEFINITIONAL_REPRESENTATION('',(#395),#414); +#395 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#396,#397,#398,#399,#400,#401, + #402,#403,#404,#405,#406,#407,#408,#409,#410,#411,#412,#413), + .UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),(1.199903170782, + 1.299592518761,1.399562301036,1.499528308304,1.599491384496, + 1.699454460687,1.799420467955,1.89939025023,1.99907959821), + .UNSPECIFIED.); +#396 = CARTESIAN_POINT('',(-2.69999850551,-1.3)); +#397 = CARTESIAN_POINT('',(-2.699648548893,-0.96736920344)); +#398 = CARTESIAN_POINT('',(-2.62162615462,-0.57651205415)); +#399 = CARTESIAN_POINT('',(-2.366946356013,3.836107015997E-02)); +#400 = CARTESIAN_POINT('',(-2.144792366664,0.3708530594)); +#401 = CARTESIAN_POINT('',(-1.673547537463,0.84211458064)); +#402 = CARTESIAN_POINT('',(-1.341077190695,1.06427378091)); +#403 = CARTESIAN_POINT('',(-0.725378888222,1.31931282896)); +#404 = CARTESIAN_POINT('',(-0.333210253972,1.39732326376)); +#405 = CARTESIAN_POINT('',(0.333210253971,1.39732326376)); +#406 = CARTESIAN_POINT('',(0.725378888221,1.31931282896)); +#407 = CARTESIAN_POINT('',(1.341077190694,1.06427378091)); +#408 = CARTESIAN_POINT('',(1.673547537463,0.84211458064)); +#409 = CARTESIAN_POINT('',(2.144792366663,0.3708530594)); +#410 = CARTESIAN_POINT('',(2.366946356012,3.836107016004E-02)); +#411 = CARTESIAN_POINT('',(2.62162615462,-0.57651205415)); +#412 = CARTESIAN_POINT('',(2.699648548892,-0.96736920344)); +#413 = CARTESIAN_POINT('',(2.69999850551,-1.3)); +#414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#415 = ORIENTED_EDGE('',*,*,#416,.T.); +#416 = EDGE_CURVE('',#315,#417,#419,.T.); +#417 = VERTEX_POINT('',#418); +#418 = CARTESIAN_POINT('',(7.943771350024,39.237690372728, + -33.83526644707)); +#419 = SURFACE_CURVE('',#420,(#425,#454),.PCURVE_S1.); +#420 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#421,#422,#423,#424), + .UNSPECIFIED.,.F.,.F.,(4,4),(-4.970657068583E-02,0.), + .PIECEWISE_BEZIER_KNOTS.); +#421 = CARTESIAN_POINT('',(8.443771349938,39.237688878238, + -33.83526644707)); +#422 = CARTESIAN_POINT('',(8.27615770903,39.237690882149,-33.83526644707 + )); +#423 = CARTESIAN_POINT('',(8.109459918935,39.237690372728, + -33.83526644707)); +#424 = CARTESIAN_POINT('',(7.943771349982,39.237690372728, + -33.83526644707)); +#425 = PCURVE('',#33,#426); +#426 = DEFINITIONAL_REPRESENTATION('',(#427),#453); +#427 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#428,#429,#430,#431,#432,#433, + #434,#435,#436,#437,#438,#439,#440,#441,#442,#443,#444,#445,#446, + #447,#448,#449,#450,#451,#452),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(-4.970657068583E-02, + -4.74471811092E-02,-4.518779153257E-02,-4.292840195594E-02, + -4.066901237932E-02,-3.840962280269E-02,-3.615023322606E-02, + -3.389084364943E-02,-3.16314540728E-02,-2.937206449617E-02, + -2.711267491954E-02,-2.485328534292E-02,-2.259389576629E-02, + -2.033450618966E-02,-1.807511661303E-02,-1.58157270364E-02, + -1.355633745977E-02,-1.129694788314E-02,-9.037558306515E-03, + -6.778168729886E-03,-4.518779153257E-03,-2.259389576629E-03,0.), + .QUASI_UNIFORM_KNOTS.); +#428 = CARTESIAN_POINT('',(-5.486423996537,-1.569744172016)); +#429 = CARTESIAN_POINT('',(-5.486597128768,-1.569776235631)); +#430 = CARTESIAN_POINT('',(-5.486943309272,-1.569838881391)); +#431 = CARTESIAN_POINT('',(-5.487462326675,-1.569928411936)); +#432 = CARTESIAN_POINT('',(-5.487981089239,-1.570013510691)); +#433 = CARTESIAN_POINT('',(-5.488499595482,-1.570094184013)); +#434 = CARTESIAN_POINT('',(-5.489017843922,-1.570170438298)); +#435 = CARTESIAN_POINT('',(-5.489535833077,-1.570242279985)); +#436 = CARTESIAN_POINT('',(-5.490053561466,-1.57030971555)); +#437 = CARTESIAN_POINT('',(-5.490571027611,-1.570372751513)); +#438 = CARTESIAN_POINT('',(-5.491088230031,-1.570431394432)); +#439 = CARTESIAN_POINT('',(-5.491605167249,-1.570485650907)); +#440 = CARTESIAN_POINT('',(-5.492121837788,-1.570535527578)); +#441 = CARTESIAN_POINT('',(-5.49263824017,-1.570581031124)); +#442 = CARTESIAN_POINT('',(-5.493154372921,-1.570622168266)); +#443 = CARTESIAN_POINT('',(-5.493670234566,-1.570658945763)); +#444 = CARTESIAN_POINT('',(-5.49418582363,-1.570691370417)); +#445 = CARTESIAN_POINT('',(-5.49470113864,-1.570719449067)); +#446 = CARTESIAN_POINT('',(-5.495216178124,-1.570743188593)); +#447 = CARTESIAN_POINT('',(-5.495730940612,-1.570762595916)); +#448 = CARTESIAN_POINT('',(-5.496245424631,-1.570777677995)); +#449 = CARTESIAN_POINT('',(-5.496759628713,-1.570788441831)); +#450 = CARTESIAN_POINT('',(-5.497273551389,-1.570794894459)); +#451 = CARTESIAN_POINT('',(-5.497615977923,-1.5707963268)); +#452 = CARTESIAN_POINT('',(-5.4977871438,-1.570796326796)); +#453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#454 = PCURVE('',#455,#460); +#455 = PLANE('',#456); +#456 = AXIS2_PLACEMENT_3D('',#457,#458,#459); +#457 = CARTESIAN_POINT('',(7.943771350024,39.137690372728, + -33.83526644707)); +#458 = DIRECTION('',(-9.969802761134E-13,1.79856167953E-16,1.)); +#459 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#460 = DEFINITIONAL_REPRESENTATION('',(#461),#466); +#461 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#462,#463,#464,#465), + .UNSPECIFIED.,.F.,.F.,(4,4),(-4.970657068583E-02,0.), + .PIECEWISE_BEZIER_KNOTS.); +#462 = CARTESIAN_POINT('',(-9.999850551E-02,0.499999999914)); +#463 = CARTESIAN_POINT('',(-0.100000509421,0.332386359006)); +#464 = CARTESIAN_POINT('',(-0.1,0.165688568911)); +#465 = CARTESIAN_POINT('',(-0.1,-4.200018111078E-11)); +#466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#467 = ORIENTED_EDGE('',*,*,#468,.T.); +#468 = EDGE_CURVE('',#417,#469,#471,.T.); +#469 = VERTEX_POINT('',#470); +#470 = CARTESIAN_POINT('',(-5.62036205939,39.23769037273,-31.69233620747 + )); +#471 = SURFACE_CURVE('',#472,(#477,#484),.PCURVE_S1.); +#472 = CIRCLE('',#473,44.); +#473 = AXIS2_PLACEMENT_3D('',#474,#475,#476); +#474 = CARTESIAN_POINT('',(7.943771349938,39.237690372728, + 10.164733552926)); +#475 = DIRECTION('',(-1.346565956382E-15,1.,-1.798561679543E-16)); +#476 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#477 = PCURVE('',#33,#478); +#478 = DEFINITIONAL_REPRESENTATION('',(#479),#483); +#479 = LINE('',#480,#481); +#480 = CARTESIAN_POINT('',(-3.926990817007,-1.570796326795)); +#481 = VECTOR('',#482,1.); +#482 = DIRECTION('',(-1.,-1.417095009416E-14)); +#483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#484 = PCURVE('',#485,#490); +#485 = CYLINDRICAL_SURFACE('',#486,44.); +#486 = AXIS2_PLACEMENT_3D('',#487,#488,#489); +#487 = CARTESIAN_POINT('',(7.943771199795,31.936891185329, + 10.164733552925)); +#488 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#489 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#490 = DEFINITIONAL_REPRESENTATION('',(#491),#495); +#491 = LINE('',#492,#493); +#492 = CARTESIAN_POINT('',(3.412341298414E-09,-7.300799187398)); +#493 = VECTOR('',#494,1.); +#494 = DIRECTION('',(-1.,0.)); +#495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#496 = ORIENTED_EDGE('',*,*,#497,.T.); +#497 = EDGE_CURVE('',#469,#498,#500,.T.); +#498 = VERTEX_POINT('',#499); +#499 = CARTESIAN_POINT('',(-6.445312156747,39.23769037273, + -31.41596245085)); +#500 = SURFACE_CURVE('',#501,(#530,#603),.PCURVE_S1.); +#501 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#502,#503,#504,#505,#506,#507, + #508,#509,#510,#511,#512,#513,#514,#515,#516,#517,#518,#519,#520, + #521,#522,#523,#524,#525,#526,#527,#528,#529),.UNSPECIFIED.,.F.,.F., + (4,2,2,2,2,2,2,2,2,2,2,2,2,4),(6.026424011567E-02,7.414408726867E-02, + 9.155867997675E-02,0.10463680235,0.115630654905,0.12576863841, + 0.130690743358,0.134317000743,0.138072481072,0.143623036324, + 0.155699902436,0.184297852877,0.211374080192,0.218539813004), + .UNSPECIFIED.); +#502 = CARTESIAN_POINT('',(-5.620362059401,39.237690372728, + -31.69233620747)); +#503 = CARTESIAN_POINT('',(-5.620362062694,39.237690371905, + -31.74284113857)); +#504 = CARTESIAN_POINT('',(-5.625476651925,39.236385846005, + -31.79161476966)); +#505 = CARTESIAN_POINT('',(-5.648618719156,39.230826384287, + -31.89457766936)); +#506 = CARTESIAN_POINT('',(-5.669363169153,39.225958961362, + -31.94584128326)); +#507 = CARTESIAN_POINT('',(-5.718221960318,39.216120941914, + -32.02080202607)); +#508 = CARTESIAN_POINT('',(-5.744057514943,39.211301765757, + -32.04948835605)); +#509 = CARTESIAN_POINT('',(-5.801435232082,39.202505550047, + -32.09119152676)); +#510 = CARTESIAN_POINT('',(-5.830557514543,39.198669582511, + -32.10533240871)); +#511 = CARTESIAN_POINT('',(-5.891343414671,39.192536567181, + -32.12153978986)); +#512 = CARTESIAN_POINT('',(-5.921519712609,39.190265670528, + -32.12416112968)); +#513 = CARTESIAN_POINT('',(-5.966788537659,39.188110464409, + -32.12104571696)); +#514 = CARTESIAN_POINT('',(-5.981544807539,39.187602444274,-32.118922515 + )); +#515 = CARTESIAN_POINT('',(-6.006955159103,39.187054332929, + -32.11348955106)); +#516 = CARTESIAN_POINT('',(-6.017658629507,39.186926234267, + -32.11064104237)); +#517 = CARTESIAN_POINT('',(-6.039227277762,39.18686808825, + -32.10382327883)); +#518 = CARTESIAN_POINT('',(-6.050077024406,39.186945260923, + -32.09982012515)); +#519 = CARTESIAN_POINT('',(-6.076578162617,39.187380788536, + -32.08870072052)); +#520 = CARTESIAN_POINT('',(-6.092020526339,39.187855672466, + -32.0810217508)); +#521 = CARTESIAN_POINT('',(-6.139653878861,39.189936213956, + -32.05384544209)); +#522 = CARTESIAN_POINT('',(-6.170192310022,39.192215676471, + -32.03107285384)); +#523 = CARTESIAN_POINT('',(-6.264560688445,39.201439488687, + -31.94539805282)); +#524 = CARTESIAN_POINT('',(-6.321909942042,39.211076158186, + -31.86568043063)); +#525 = CARTESIAN_POINT('',(-6.405573956053,39.227738554336, + -31.6856653563)); +#526 = CARTESIAN_POINT('',(-6.432224443392,39.234443920104, + -31.58906337152)); +#527 = CARTESIAN_POINT('',(-6.444076734197,39.237379898568, + -31.46633075928)); +#528 = CARTESIAN_POINT('',(-6.445312155022,39.237690372299, + -31.44092127968)); +#529 = CARTESIAN_POINT('',(-6.445312156737,39.237690372728, + -31.41596245085)); +#530 = PCURVE('',#33,#531); +#531 = DEFINITIONAL_REPRESENTATION('',(#532),#602); +#532 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#533,#534,#535,#536,#537,#538, + #539,#540,#541,#542,#543,#544,#545,#546,#547,#548,#549,#550,#551, + #552,#553,#554,#555,#556,#557,#558,#559,#560,#561,#562,#563,#564, + #565,#566,#567,#568,#569,#570,#571,#572,#573,#574,#575,#576,#577, + #578,#579,#580,#581,#582,#583,#584,#585,#586,#587,#588,#589,#590, + #591,#592,#593,#594,#595,#596,#597,#598,#599,#600,#601), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,4),(6.026424011567E-02,6.26623548564E-02, + 6.506046959713E-02,6.745858433786E-02,6.985669907858E-02, + 7.225481381931E-02,7.465292856004E-02,7.705104330077E-02, + 7.944915804149E-02,8.184727278222E-02,8.424538752295E-02, + 8.664350226368E-02,8.90416170044E-02,9.143973174513E-02, + 9.383784648586E-02,9.623596122659E-02,9.863407596731E-02, + 0.101032190708,0.103430305449,0.105828420189,0.10822653493, + 0.110624649671,0.113022764412,0.115420879152,0.117818993893, + 0.120217108634,0.122615223375,0.125013338115,0.127411452856, + 0.129809567597,0.132207682337,0.134605797078,0.137003911819, + 0.13940202656,0.1418001413,0.144198256041,0.146596370782, + 0.148994485523,0.151392600263,0.153790715004,0.156188829745, + 0.158586944486,0.160985059226,0.163383173967,0.165781288708, + 0.168179403448,0.170577518189,0.17297563293,0.175373747671, + 0.177771862411,0.180169977152,0.182568091893,0.184966206634, + 0.187364321374,0.189762436115,0.192160550856,0.194558665596, + 0.196956780337,0.199354895078,0.201753009819,0.204151124559, + 0.2065492393,0.208947354041,0.211345468782,0.213743583522, + 0.216141698263,0.218539813004),.UNSPECIFIED.); +#533 = CARTESIAN_POINT('',(-5.811167126723,-1.570796309651)); +#534 = CARTESIAN_POINT('',(-5.811105989419,-1.567721833076)); +#535 = CARTESIAN_POINT('',(-5.810991110579,-1.561574252105)); +#536 = CARTESIAN_POINT('',(-5.8108412613,-1.552371214896)); +#537 = CARTESIAN_POINT('',(-5.810714164611,-1.543201020993)); +#538 = CARTESIAN_POINT('',(-5.81061009737,-1.534077159706)); +#539 = CARTESIAN_POINT('',(-5.810529356389,-1.525016974815)); +#540 = CARTESIAN_POINT('',(-5.810472161607,-1.516023397811)); +#541 = CARTESIAN_POINT('',(-5.81043905803,-1.507159671453)); +#542 = CARTESIAN_POINT('',(-5.810430077937,-1.498451328978)); +#543 = CARTESIAN_POINT('',(-5.810445194194,-1.489909783165)); +#544 = CARTESIAN_POINT('',(-5.810484403174,-1.481549950324)); +#545 = CARTESIAN_POINT('',(-5.810547675983,-1.473387238891)); +#546 = CARTESIAN_POINT('',(-5.810635071902,-1.465431903547)); +#547 = CARTESIAN_POINT('',(-5.81074633464,-1.457714579179)); +#548 = CARTESIAN_POINT('',(-5.810882395133,-1.450189737406)); +#549 = CARTESIAN_POINT('',(-5.811045557697,-1.442805227577)); +#550 = CARTESIAN_POINT('',(-5.811236454211,-1.435615219082)); +#551 = CARTESIAN_POINT('',(-5.811456213124,-1.428644797445)); +#552 = CARTESIAN_POINT('',(-5.811705645259,-1.42193005849)); +#553 = CARTESIAN_POINT('',(-5.811986348898,-1.415492172487)); +#554 = CARTESIAN_POINT('',(-5.812294037817,-1.409469354236)); +#555 = CARTESIAN_POINT('',(-5.812628887393,-1.403870518388)); +#556 = CARTESIAN_POINT('',(-5.812990372081,-1.398722951147)); +#557 = CARTESIAN_POINT('',(-5.813379183492,-1.394037282907)); +#558 = CARTESIAN_POINT('',(-5.813791883674,-1.389872676876)); +#559 = CARTESIAN_POINT('',(-5.814221232616,-1.386290116095)); +#560 = CARTESIAN_POINT('',(-5.814667300906,-1.383267387091)); +#561 = CARTESIAN_POINT('',(-5.815128326571,-1.380803362564)); +#562 = CARTESIAN_POINT('',(-5.815602756666,-1.378894297647)); +#563 = CARTESIAN_POINT('',(-5.816085187758,-1.377542385254)); +#564 = CARTESIAN_POINT('',(-5.816574588223,-1.376726321274)); +#565 = CARTESIAN_POINT('',(-5.817068634901,-1.37642890109)); +#566 = CARTESIAN_POINT('',(-5.817565425399,-1.376629072398)); +#567 = CARTESIAN_POINT('',(-5.818063206216,-1.377304722157)); +#568 = CARTESIAN_POINT('',(-5.818559779198,-1.378430903295)); +#569 = CARTESIAN_POINT('',(-5.819053875905,-1.37998267966)); +#570 = CARTESIAN_POINT('',(-5.819544206174,-1.381935074622)); +#571 = CARTESIAN_POINT('',(-5.820029964965,-1.384265337934)); +#572 = CARTESIAN_POINT('',(-5.820510145722,-1.386949698604)); +#573 = CARTESIAN_POINT('',(-5.820984233205,-1.389968046017)); +#574 = CARTESIAN_POINT('',(-5.821449925464,-1.393286891037)); +#575 = CARTESIAN_POINT('',(-5.821912300994,-1.396928298759)); +#576 = CARTESIAN_POINT('',(-5.82237230025,-1.400897172688)); +#577 = CARTESIAN_POINT('',(-5.822828972666,-1.405183502123)); +#578 = CARTESIAN_POINT('',(-5.823281872389,-1.40978134437)); +#579 = CARTESIAN_POINT('',(-5.823730416159,-1.414683740373)); +#580 = CARTESIAN_POINT('',(-5.824174055497,-1.419884083845)); +#581 = CARTESIAN_POINT('',(-5.824612229539,-1.425375740344)); +#582 = CARTESIAN_POINT('',(-5.825044380987,-1.431152211041)); +#583 = CARTESIAN_POINT('',(-5.825469938979,-1.437206866237)); +#584 = CARTESIAN_POINT('',(-5.825888371165,-1.443533854148)); +#585 = CARTESIAN_POINT('',(-5.826298992093,-1.450124738252)); +#586 = CARTESIAN_POINT('',(-5.826701677127,-1.456981044897)); +#587 = CARTESIAN_POINT('',(-5.827093738574,-1.46405957272)); +#588 = CARTESIAN_POINT('',(-5.827474373237,-1.471344722499)); +#589 = CARTESIAN_POINT('',(-5.827843097348,-1.478827030635)); +#590 = CARTESIAN_POINT('',(-5.828199337881,-1.486495445791)); +#591 = CARTESIAN_POINT('',(-5.828542542253,-1.494339408972)); +#592 = CARTESIAN_POINT('',(-5.828872148259,-1.502348278397)); +#593 = CARTESIAN_POINT('',(-5.829187594699,-1.510511576369)); +#594 = CARTESIAN_POINT('',(-5.829488309086,-1.518818607596)); +#595 = CARTESIAN_POINT('',(-5.829773746334,-1.527259773535)); +#596 = CARTESIAN_POINT('',(-5.830043246535,-1.535821734606)); +#597 = CARTESIAN_POINT('',(-5.830296565392,-1.544505487752)); +#598 = CARTESIAN_POINT('',(-5.830531895024,-1.553258937099)); +#599 = CARTESIAN_POINT('',(-5.830747619527,-1.56202322989)); +#600 = CARTESIAN_POINT('',(-5.830878422674,-1.567872769921)); +#601 = CARTESIAN_POINT('',(-5.830940504162,-1.570796308611)); +#602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#603 = PCURVE('',#604,#609); +#604 = CYLINDRICAL_SURFACE('',#605,1.7); +#605 = AXIS2_PLACEMENT_3D('',#606,#607,#608); +#606 = CARTESIAN_POINT('',(-6.032837108069,40.886891492734, + -33.93526644706)); +#607 = DIRECTION('',(-6.626431603857E-29,-2.442490654279E-15,1.)); +#608 = DIRECTION('',(-1.,1.803187229162E-14,-2.222163648714E-29)); +#609 = DEFINITIONAL_REPRESENTATION('',(#610),#680); +#610 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#611,#612,#613,#614,#615,#616, + #617,#618,#619,#620,#621,#622,#623,#624,#625,#626,#627,#628,#629, + #630,#631,#632,#633,#634,#635,#636,#637,#638,#639,#640,#641,#642, + #643,#644,#645,#646,#647,#648,#649,#650,#651,#652,#653,#654,#655, + #656,#657,#658,#659,#660,#661,#662,#663,#664,#665,#666,#667,#668, + #669,#670,#671,#672,#673,#674,#675,#676,#677,#678,#679), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,4),(6.026424011567E-02,6.26623548564E-02, + 6.506046959713E-02,6.745858433786E-02,6.985669907858E-02, + 7.225481381931E-02,7.465292856004E-02,7.705104330077E-02, + 7.944915804149E-02,8.184727278222E-02,8.424538752295E-02, + 8.664350226368E-02,8.90416170044E-02,9.143973174513E-02, + 9.383784648586E-02,9.623596122659E-02,9.863407596731E-02, + 0.101032190708,0.103430305449,0.105828420189,0.10822653493, + 0.110624649671,0.113022764412,0.115420879152,0.117818993893, + 0.120217108634,0.122615223375,0.125013338115,0.127411452856, + 0.129809567597,0.132207682337,0.134605797078,0.137003911819, + 0.13940202656,0.1418001413,0.144198256041,0.146596370782, + 0.148994485523,0.151392600263,0.153790715004,0.156188829745, + 0.158586944486,0.160985059226,0.163383173967,0.165781288708, + 0.168179403448,0.170577518189,0.17297563293,0.175373747671, + 0.177771862411,0.180169977152,0.182568091893,0.184966206634, + 0.187364321374,0.189762436115,0.192160550856,0.194558665596, + 0.196956780337,0.199354895078,0.201753009819,0.204151124559, + 0.2065492393,0.208947354041,0.211345468782,0.213743583522, + 0.216141698263,0.218539813004),.UNSPECIFIED.); +#611 = CARTESIAN_POINT('',(-4.467310581663,2.242930239586)); +#612 = CARTESIAN_POINT('',(-4.467310582422,2.234204162244)); +#613 = CARTESIAN_POINT('',(-4.467495951326,2.21685539415)); +#614 = CARTESIAN_POINT('',(-4.468330120412,2.191184781082)); +#615 = CARTESIAN_POINT('',(-4.469720305217,2.165909869043)); +#616 = CARTESIAN_POINT('',(-4.471666803305,2.141071080707)); +#617 = CARTESIAN_POINT('',(-4.474168495768,2.11671901322)); +#618 = CARTESIAN_POINT('',(-4.477229604441,2.092866305123)); +#619 = CARTESIAN_POINT('',(-4.480832154173,2.069684754321)); +#620 = CARTESIAN_POINT('',(-4.484963109583,2.047241776338)); +#621 = CARTESIAN_POINT('',(-4.489615198179,2.02556757066)); +#622 = CARTESIAN_POINT('',(-4.494780024442,2.004701455849)); +#623 = CARTESIAN_POINT('',(-4.500448385045,1.984683490205)); +#624 = CARTESIAN_POINT('',(-4.506615920906,1.965541653992)); +#625 = CARTESIAN_POINT('',(-4.513260203769,1.947351499886)); +#626 = CARTESIAN_POINT('',(-4.520426733131,1.930010368954)); +#627 = CARTESIAN_POINT('',(-4.528197810128,1.913417188445)); +#628 = CARTESIAN_POINT('',(-4.536560848568,1.897719165142)); +#629 = CARTESIAN_POINT('',(-4.54553051298,1.882996032349)); +#630 = CARTESIAN_POINT('',(-4.555108223785,1.869351085651)); +#631 = CARTESIAN_POINT('',(-4.565322733346,1.856860844977)); +#632 = CARTESIAN_POINT('',(-4.575997234365,1.845816182816)); +#633 = CARTESIAN_POINT('',(-4.58713139222,1.836240711679)); +#634 = CARTESIAN_POINT('',(-4.598698378601,1.828194866315)); +#635 = CARTESIAN_POINT('',(-4.610710194397,1.821713599756)); +#636 = CARTESIAN_POINT('',(-4.623052055255,1.816896969676)); +#637 = CARTESIAN_POINT('',(-4.63551422498,1.813796919176)); +#638 = CARTESIAN_POINT('',(-4.648110407625,1.81235648961)); +#639 = CARTESIAN_POINT('',(-4.660798200716,1.812546375536)); +#640 = CARTESIAN_POINT('',(-4.673541854372,1.814333195988)); +#641 = CARTESIAN_POINT('',(-4.686206923723,1.817646470661)); +#642 = CARTESIAN_POINT('',(-4.698779271976,1.822416756944)); +#643 = CARTESIAN_POINT('',(-4.711210498187,1.828567548549)); +#644 = CARTESIAN_POINT('',(-4.723464441946,1.836018659244)); +#645 = CARTESIAN_POINT('',(-4.735509001979,1.844689629826)); +#646 = CARTESIAN_POINT('',(-4.747302254296,1.854486794146)); +#647 = CARTESIAN_POINT('',(-4.758825183376,1.865329770679)); +#648 = CARTESIAN_POINT('',(-4.77005816883,1.877137666748)); +#649 = CARTESIAN_POINT('',(-4.78099228446,1.889842462517)); +#650 = CARTESIAN_POINT('',(-4.791613979424,1.903370643574)); +#651 = CARTESIAN_POINT('',(-4.801920037667,1.917664789312)); +#652 = CARTESIAN_POINT('',(-4.811869220392,1.932608598477)); +#653 = CARTESIAN_POINT('',(-4.821576786223,1.948329449864)); +#654 = CARTESIAN_POINT('',(-4.831062965713,1.964854271192)); +#655 = CARTESIAN_POINT('',(-4.840308118981,1.982145653225)); +#656 = CARTESIAN_POINT('',(-4.849303093512,2.000183426571)); +#657 = CARTESIAN_POINT('',(-4.858035744445,2.018942799407)); +#658 = CARTESIAN_POINT('',(-4.86649456408,2.038400229793)); +#659 = CARTESIAN_POINT('',(-4.874667706434,2.058531798689)); +#660 = CARTESIAN_POINT('',(-4.882543316572,2.079313845568)); +#661 = CARTESIAN_POINT('',(-4.890109239914,2.100722052961)); +#662 = CARTESIAN_POINT('',(-4.897353900975,2.122734472645)); +#663 = CARTESIAN_POINT('',(-4.904263118746,2.145320336356)); +#664 = CARTESIAN_POINT('',(-4.910832000664,2.168481786752)); +#665 = CARTESIAN_POINT('',(-4.917012812089,2.192071837127)); +#666 = CARTESIAN_POINT('',(-4.92279245517,2.216038843404)); +#667 = CARTESIAN_POINT('',(-4.928162908658,2.24035114591)); +#668 = CARTESIAN_POINT('',(-4.933114734041,2.264971726262)); +#669 = CARTESIAN_POINT('',(-4.93763881369,2.289865016507)); +#670 = CARTESIAN_POINT('',(-4.941725878631,2.314995005676)); +#671 = CARTESIAN_POINT('',(-4.945366650787,2.340326004446)); +#672 = CARTESIAN_POINT('',(-4.948551744357,2.365821479918)); +#673 = CARTESIAN_POINT('',(-4.951271924661,2.391447951858)); +#674 = CARTESIAN_POINT('',(-4.953517188412,2.417160572936)); +#675 = CARTESIAN_POINT('',(-4.955280213338,2.442956911555)); +#676 = CARTESIAN_POINT('',(-4.956543523744,2.468676240273)); +#677 = CARTESIAN_POINT('',(-4.957299443859,2.494143194573)); +#678 = CARTESIAN_POINT('',(-4.957467378697,2.510951169602)); +#679 = CARTESIAN_POINT('',(-4.957467379107,2.519303996211)); +#680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#681 = ORIENTED_EDGE('',*,*,#682,.T.); +#682 = EDGE_CURVE('',#498,#683,#685,.T.); +#683 = VERTEX_POINT('',#684); +#684 = CARTESIAN_POINT('',(-33.61145489111,39.237690372729, + -4.297741495748)); +#685 = SURFACE_CURVE('',#686,(#691,#698),.PCURVE_S1.); +#686 = CIRCLE('',#687,44.); +#687 = AXIS2_PLACEMENT_3D('',#688,#689,#690); +#688 = CARTESIAN_POINT('',(7.943771349938,39.237690372728, + 10.164733552926)); +#689 = DIRECTION('',(-1.346565956382E-15,1.,-1.798561679543E-16)); +#690 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#691 = PCURVE('',#33,#692); +#692 = DEFINITIONAL_REPRESENTATION('',(#693),#697); +#693 = LINE('',#694,#695); +#694 = CARTESIAN_POINT('',(-3.926990817006,-1.570796326795)); +#695 = VECTOR('',#696,1.); +#696 = DIRECTION('',(-1.,-9.838869825439E-15)); +#697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#698 = PCURVE('',#699,#704); +#699 = CYLINDRICAL_SURFACE('',#700,44.); +#700 = AXIS2_PLACEMENT_3D('',#701,#702,#703); +#701 = CARTESIAN_POINT('',(7.943771199795,31.936891185329, + 10.164733552925)); +#702 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#703 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#704 = DEFINITIONAL_REPRESENTATION('',(#705),#708); +#705 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#706,#707),.UNSPECIFIED.,.F.,.F., + (2,2),(1.903949687155,2.806673714872),.PIECEWISE_BEZIER_KNOTS.); +#706 = CARTESIAN_POINT('',(-1.90394968393,-7.300799187398)); +#707 = CARTESIAN_POINT('',(-2.80667371375,-7.300799187398)); +#708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#709 = ORIENTED_EDGE('',*,*,#710,.T.); +#710 = EDGE_CURVE('',#683,#711,#713,.T.); +#711 = VERTEX_POINT('',#712); +#712 = CARTESIAN_POINT('',(-33.88944423007,39.237690372729, + -3.472791398402)); +#713 = SURFACE_CURVE('',#714,(#745,#818),.PCURVE_S1.); +#714 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#715,#716,#717,#718,#719,#720, + #721,#722,#723,#724,#725,#726,#727,#728,#729,#730,#731,#732,#733, + #734,#735,#736,#737,#738,#739,#740,#741,#742,#743,#744), + .UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,2,2,2,2,2,2,4),( + 9.008860201946E-02,9.170547495634E-02,0.121246291506,0.146337370559, + 0.162970450184,0.168986658752,0.172748419987,0.176163612787, + 0.180494626059,0.188471953766,0.197490509248,0.207390281773, + 0.219878545045,0.23778874101,0.24763753555),.UNSPECIFIED.); +#715 = CARTESIAN_POINT('',(-33.61145489111,39.237690372728, + -4.297741495739)); +#716 = CARTESIAN_POINT('',(-33.61721170682,39.237690372442, + -4.297741494597)); +#717 = CARTESIAN_POINT('',(-33.62299641482,39.237673946227, + -4.297675834358)); +#718 = CARTESIAN_POINT('',(-33.7349722763,39.237039570798, + -4.295138117718)); +#719 = CARTESIAN_POINT('',(-33.8425182887,39.230716175888, + -4.271042674597)); +#720 = CARTESIAN_POINT('',(-34.02258924179,39.215063854971, + -4.195504453056)); +#721 = CARTESIAN_POINT('',(-34.09679358294,39.206609307127, + -4.149221392578)); +#722 = CARTESIAN_POINT('',(-34.19774848177,39.195351286759, + -4.058526522692)); +#723 = CARTESIAN_POINT('',(-34.23383783186,39.191392443297, + -4.017125721016)); +#724 = CARTESIAN_POINT('',(-34.27206118636,39.188230929801, + -3.954746948734)); +#725 = CARTESIAN_POINT('',(-34.28117397155,39.187604669354, + -3.93757822284)); +#726 = CARTESIAN_POINT('',(-34.2938963906,39.18701939437,-3.908865596824 + )); +#727 = CARTESIAN_POINT('',(-34.29828471231,39.186898355546, + -3.897633291099)); +#728 = CARTESIAN_POINT('',(-34.30557601908,39.186885803763, + -3.875913268266)); +#729 = CARTESIAN_POINT('',(-34.30857631689,39.186974181025, + -3.865459029413)); +#730 = CARTESIAN_POINT('',(-34.3142180017,39.187401202497, + -3.841544719663)); +#731 = CARTESIAN_POINT('',(-34.31654453935,39.187800612662, + -3.828042279253)); +#732 = CARTESIAN_POINT('',(-34.32056516629,39.18940776948, + -3.789481838955)); +#733 = CARTESIAN_POINT('',(-34.3200545463,39.191007808472, + -3.764490451706)); +#734 = CARTESIAN_POINT('',(-34.31157481922,39.195500581056, + -3.712135696839)); +#735 = CARTESIAN_POINT('',(-34.3027684136,39.198464202729, + -3.685680414867)); +#736 = CARTESIAN_POINT('',(-34.27569089315,39.205362857331, + -3.633850270111)); +#737 = CARTESIAN_POINT('',(-34.25706647245,39.209230164102, + -3.609748192727)); +#738 = CARTESIAN_POINT('',(-34.20744398663,39.217672299584, + -3.56210108386)); +#739 = CARTESIAN_POINT('',(-34.17507989447,39.222051288212, + -3.540890761309)); +#740 = CARTESIAN_POINT('',(-34.09093980979,39.230814753971, + -3.500557191052)); +#741 = CARTESIAN_POINT('',(-34.03656943213,39.234390715509, + -3.486144782311)); +#742 = CARTESIAN_POINT('',(-33.95197621104,39.237186469915, + -3.474790442593)); +#743 = CARTESIAN_POINT('',(-33.9210127796,39.237690371141, + -3.472791404756)); +#744 = CARTESIAN_POINT('',(-33.88944423007,39.237690372728, + -3.472791398411)); +#745 = PCURVE('',#33,#746); +#746 = DEFINITIONAL_REPRESENTATION('',(#747),#817); +#747 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#748,#749,#750,#751,#752,#753, + #754,#755,#756,#757,#758,#759,#760,#761,#762,#763,#764,#765,#766, + #767,#768,#769,#770,#771,#772,#773,#774,#775,#776,#777,#778,#779, + #780,#781,#782,#783,#784,#785,#786,#787,#788,#789,#790,#791,#792, + #793,#794,#795,#796,#797,#798,#799,#800,#801,#802,#803,#804,#805, + #806,#807,#808,#809,#810,#811,#812,#813,#814,#815,#816), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,4),(9.008860201946E-02,9.247570707295E-02, + 9.486281212644E-02,9.724991717994E-02,9.963702223343E-02, + 0.102024127287,0.10441123234,0.106798337394,0.109185442447, + 0.111572547501,0.113959652554,0.116346757608,0.118733862661, + 0.121120967715,0.123508072768,0.125895177822,0.128282282875, + 0.130669387929,0.133056492982,0.135443598036,0.137830703089, + 0.140217808143,0.142604913196,0.14499201825,0.147379123303, + 0.149766228357,0.15215333341,0.154540438464,0.156927543517, + 0.159314648571,0.161701753624,0.164088858678,0.166475963731, + 0.168863068785,0.171250173838,0.173637278892,0.176024383945, + 0.178411488999,0.180798594052,0.183185699106,0.185572804159, + 0.187959909213,0.190347014266,0.19273411932,0.195121224373, + 0.197508329427,0.19989543448,0.202282539534,0.204669644587, + 0.207056749641,0.209443854694,0.211830959748,0.214218064801, + 0.216605169855,0.218992274908,0.221379379962,0.223766485015, + 0.226153590068,0.228540695122,0.230927800175,0.233314905229, + 0.235702010282,0.238089115336,0.240476220389,0.242863325443, + 0.245250430496,0.24763753555),.UNSPECIFIED.); +#748 = CARTESIAN_POINT('',(-6.733664531879,-1.570796274277)); +#749 = CARTESIAN_POINT('',(-6.733728210111,-1.567814785445)); +#750 = CARTESIAN_POINT('',(-6.733862195714,-1.561862452946)); +#751 = CARTESIAN_POINT('',(-6.734081960792,-1.552995829139)); +#752 = CARTESIAN_POINT('',(-6.734319145326,-1.544232302951)); +#753 = CARTESIAN_POINT('',(-6.734573314747,-1.535573605741)); +#754 = CARTESIAN_POINT('',(-6.734843787955,-1.527032158718)); +#755 = CARTESIAN_POINT('',(-6.735129953335,-1.518617618098)); +#756 = CARTESIAN_POINT('',(-6.735431184231,-1.510340469915)); +#757 = CARTESIAN_POINT('',(-6.735746861344,-1.502211064)); +#758 = CARTESIAN_POINT('',(-6.736076367897,-1.494239844065)); +#759 = CARTESIAN_POINT('',(-6.736419086804,-1.486437357164)); +#760 = CARTESIAN_POINT('',(-6.736774416988,-1.478813953047)); +#761 = CARTESIAN_POINT('',(-6.737141711041,-1.471380948533)); +#762 = CARTESIAN_POINT('',(-6.737520508347,-1.464146246329)); +#763 = CARTESIAN_POINT('',(-6.737909664958,-1.457130675856)); +#764 = CARTESIAN_POINT('',(-6.738307859244,-1.450355697566)); +#765 = CARTESIAN_POINT('',(-6.738714745353,-1.443824587274)); +#766 = CARTESIAN_POINT('',(-6.739129721355,-1.437545542896)); +#767 = CARTESIAN_POINT('',(-6.739552256456,-1.431525537044)); +#768 = CARTESIAN_POINT('',(-6.739981805139,-1.425771946498)); +#769 = CARTESIAN_POINT('',(-6.740417823031,-1.420292169604)); +#770 = CARTESIAN_POINT('',(-6.740859788952,-1.415093515811)); +#771 = CARTESIAN_POINT('',(-6.741307100452,-1.410184019166)); +#772 = CARTESIAN_POINT('',(-6.741759469211,-1.405569283881)); +#773 = CARTESIAN_POINT('',(-6.742215443478,-1.401264277327)); +#774 = CARTESIAN_POINT('',(-6.742681237923,-1.397219684646)); +#775 = CARTESIAN_POINT('',(-6.743155684598,-1.393463239891)); +#776 = CARTESIAN_POINT('',(-6.743638094684,-1.390016616066)); +#777 = CARTESIAN_POINT('',(-6.744127656309,-1.386903177527)); +#778 = CARTESIAN_POINT('',(-6.74462359553,-1.38414585173)); +#779 = CARTESIAN_POINT('',(-6.745125134282,-1.381767880078)); +#780 = CARTESIAN_POINT('',(-6.745631497165,-1.379791935026)); +#781 = CARTESIAN_POINT('',(-6.746142196685,-1.378243137509)); +#782 = CARTESIAN_POINT('',(-6.746655765902,-1.377150467548)); +#783 = CARTESIAN_POINT('',(-6.747170538123,-1.376542807691)); +#784 = CARTESIAN_POINT('',(-6.747684496528,-1.376448098036)); +#785 = CARTESIAN_POINT('',(-6.74819554133,-1.376892749078)); +#786 = CARTESIAN_POINT('',(-6.748701350574,-1.377900521205)); +#787 = CARTESIAN_POINT('',(-6.749200192928,-1.379495540783)); +#788 = CARTESIAN_POINT('',(-6.749687924995,-1.381690778063)); +#789 = CARTESIAN_POINT('',(-6.750161628064,-1.384492780064)); +#790 = CARTESIAN_POINT('',(-6.750620227272,-1.387917493933)); +#791 = CARTESIAN_POINT('',(-6.751060225741,-1.391965249027)); +#792 = CARTESIAN_POINT('',(-6.751473965781,-1.396568901641)); +#793 = CARTESIAN_POINT('',(-6.751861964738,-1.401721724951)); +#794 = CARTESIAN_POINT('',(-6.752223945314,-1.407423169116)); +#795 = CARTESIAN_POINT('',(-6.752555527294,-1.413595761242)); +#796 = CARTESIAN_POINT('',(-6.752853853706,-1.420144428649)); +#797 = CARTESIAN_POINT('',(-6.753120446259,-1.427049445727)); +#798 = CARTESIAN_POINT('',(-6.753355844189,-1.434277705342)); +#799 = CARTESIAN_POINT('',(-6.753560105243,-1.44177447071)); +#800 = CARTESIAN_POINT('',(-6.75373301378,-1.449452079546)); +#801 = CARTESIAN_POINT('',(-6.753876304846,-1.457291220705)); +#802 = CARTESIAN_POINT('',(-6.753991218375,-1.465255059663)); +#803 = CARTESIAN_POINT('',(-6.754079118223,-1.473311898581)); +#804 = CARTESIAN_POINT('',(-6.754141368623,-1.481427029363)); +#805 = CARTESIAN_POINT('',(-6.754179444264,-1.489591084229)); +#806 = CARTESIAN_POINT('',(-6.754194389966,-1.49778412175)); +#807 = CARTESIAN_POINT('',(-6.754187339611,-1.505987623602)); +#808 = CARTESIAN_POINT('',(-6.75415939859,-1.514183213464)); +#809 = CARTESIAN_POINT('',(-6.754111709686,-1.522350268016)); +#810 = CARTESIAN_POINT('',(-6.75404530868,-1.530476854992)); +#811 = CARTESIAN_POINT('',(-6.753961637442,-1.538518469614)); +#812 = CARTESIAN_POINT('',(-6.753860572238,-1.546557718058)); +#813 = CARTESIAN_POINT('',(-6.753741787498,-1.554629117866)); +#814 = CARTESIAN_POINT('',(-6.753605670709,-1.562711149115)); +#815 = CARTESIAN_POINT('',(-6.753503502572,-1.568101961634)); +#816 = CARTESIAN_POINT('',(-6.753449604461,-1.570796273924)); +#817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#818 = PCURVE('',#819,#824); +#819 = CYLINDRICAL_SURFACE('',#820,1.7); +#820 = AXIS2_PLACEMENT_3D('',#821,#822,#823); +#821 = CARTESIAN_POINT('',(-38.99050880019,40.886891492734, + -3.885266447075)); +#822 = DIRECTION('',(1.,-2.683038976192E-16,1.665334536928E-15)); +#823 = DIRECTION('',(-2.683038976192E-16,-1.,1.552111978096E-14)); +#824 = DEFINITIONAL_REPRESENTATION('',(#825),#895); +#825 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#826,#827,#828,#829,#830,#831, + #832,#833,#834,#835,#836,#837,#838,#839,#840,#841,#842,#843,#844, + #845,#846,#847,#848,#849,#850,#851,#852,#853,#854,#855,#856,#857, + #858,#859,#860,#861,#862,#863,#864,#865,#866,#867,#868,#869,#870, + #871,#872,#873,#874,#875,#876,#877,#878,#879,#880,#881,#882,#883, + #884,#885,#886,#887,#888,#889,#890,#891,#892,#893,#894), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,4),(9.008860201946E-02,9.247570707295E-02, + 9.486281212644E-02,9.724991717994E-02,9.963702223343E-02, + 0.102024127287,0.10441123234,0.106798337394,0.109185442447, + 0.111572547501,0.113959652554,0.116346757608,0.118733862661, + 0.121120967715,0.123508072768,0.125895177822,0.128282282875, + 0.130669387929,0.133056492982,0.135443598036,0.137830703089, + 0.140217808143,0.142604913196,0.14499201825,0.147379123303, + 0.149766228357,0.15215333341,0.154540438464,0.156927543517, + 0.159314648571,0.161701753624,0.164088858678,0.166475963731, + 0.168863068785,0.171250173838,0.173637278892,0.176024383945, + 0.178411488999,0.180798594052,0.183185699106,0.185572804159, + 0.187959909213,0.190347014266,0.19273411932,0.195121224373, + 0.197508329427,0.19989543448,0.202282539534,0.204669644587, + 0.207056749641,0.209443854694,0.211830959748,0.214218064801, + 0.216605169855,0.218992274908,0.221379379962,0.223766485015, + 0.226153590068,0.228540695122,0.230927800175,0.233314905229, + 0.235702010282,0.238089115336,0.240476220389,0.242863325443, + 0.245250430496,0.24763753555),.UNSPECIFIED.); +#826 = CARTESIAN_POINT('',(0.24507839872,5.379053909079)); +#827 = CARTESIAN_POINT('',(0.245078492546,5.370530219047)); +#828 = CARTESIAN_POINT('',(0.24490349572,5.353413619961)); +#829 = CARTESIAN_POINT('',(0.244126665155,5.327625227257)); +#830 = CARTESIAN_POINT('',(0.242847096328,5.301850207487)); +#831 = CARTESIAN_POINT('',(0.241075059967,5.276100963594)); +#832 = CARTESIAN_POINT('',(0.238821161671,5.250420568799)); +#833 = CARTESIAN_POINT('',(0.236095885439,5.22484387928)); +#834 = CARTESIAN_POINT('',(0.23290970693,5.199407949101)); +#835 = CARTESIAN_POINT('',(0.229273063733,5.17414925783)); +#836 = CARTESIAN_POINT('',(0.225196343322,5.149104385131)); +#837 = CARTESIAN_POINT('',(0.220689956115,5.12431008478)); +#838 = CARTESIAN_POINT('',(0.215764060838,5.099802314012)); +#839 = CARTESIAN_POINT('',(0.210429603763,5.075620042113)); +#840 = CARTESIAN_POINT('',(0.204694456237,5.051790986705)); +#841 = CARTESIAN_POINT('',(0.198577849385,5.02838486001)); +#842 = CARTESIAN_POINT('',(0.192104046712,5.00547451325)); +#843 = CARTESIAN_POINT('',(0.185281067671,4.983073299766)); +#844 = CARTESIAN_POINT('',(0.178121130353,4.961210372161)); +#845 = CARTESIAN_POINT('',(0.170635216487,4.939910663357)); +#846 = CARTESIAN_POINT('',(0.162834481345,4.919200185725)); +#847 = CARTESIAN_POINT('',(0.154730016617,4.899104853535)); +#848 = CARTESIAN_POINT('',(0.146332353204,4.879649894009)); +#849 = CARTESIAN_POINT('',(0.137653647449,4.860863380652)); +#850 = CARTESIAN_POINT('',(0.128699389459,4.842762688895)); +#851 = CARTESIAN_POINT('',(0.119499335028,4.825405140179)); +#852 = CARTESIAN_POINT('',(0.109924182941,4.808577230544)); +#853 = CARTESIAN_POINT('',(9.998997330738E-02,4.792365010762)); +#854 = CARTESIAN_POINT('',(8.970377104801E-02,4.776832297024)); +#855 = CARTESIAN_POINT('',(7.907476967278E-02,4.762048889614)); +#856 = CARTESIAN_POINT('',(6.811133754895E-02,4.748082887031)); +#857 = CARTESIAN_POINT('',(5.682167168206E-02,4.735003210822)); +#858 = CARTESIAN_POINT('',(4.521407585868E-02,4.72287719212)); +#859 = CARTESIAN_POINT('',(3.328826017806E-02,4.711774585659)); +#860 = CARTESIAN_POINT('',(2.106617857488E-02,4.701788862352)); +#861 = CARTESIAN_POINT('',(8.574673208755E-03,4.693015954844)); +#862 = CARTESIAN_POINT('',(-4.150518057262E-03,4.685554781102)); +#863 = CARTESIAN_POINT('',(-1.707099932225E-02,4.679501715038)); +#864 = CARTESIAN_POINT('',(-3.014172382734E-02,4.674949798026)); +#865 = CARTESIAN_POINT('',(-4.333267982568E-02,4.671985357641)); +#866 = CARTESIAN_POINT('',(-5.654843918591E-02,4.670700033273)); +#867 = CARTESIAN_POINT('',(-6.972089492342E-02,4.671153394578)); +#868 = CARTESIAN_POINT('',(-8.283236069147E-02,4.673402824594)); +#869 = CARTESIAN_POINT('',(-9.579721085029E-02,4.677499733884)); +#870 = CARTESIAN_POINT('',(-0.108392272141,4.683383832322)); +#871 = CARTESIAN_POINT('',(-0.12062748954,4.691033165603)); +#872 = CARTESIAN_POINT('',(-0.132496091263,4.700452322925)); +#873 = CARTESIAN_POINT('',(-0.143850233429,4.711507968569)); +#874 = CARTESIAN_POINT('',(-0.154570652547,4.723999814061)); +#875 = CARTESIAN_POINT('',(-0.164684774951,4.737857224847)); +#876 = CARTESIAN_POINT('',(-0.174188616166,4.752989242459)); +#877 = CARTESIAN_POINT('',(-0.1830547622,4.769256550164)); +#878 = CARTESIAN_POINT('',(-0.191232707824,4.786438155242)); +#879 = CARTESIAN_POINT('',(-0.198755348399,4.804459425376)); +#880 = CARTESIAN_POINT('',(-0.205634089487,4.823208227679)); +#881 = CARTESIAN_POINT('',(-0.211885879629,4.842583700842)); +#882 = CARTESIAN_POINT('',(-0.217525669056,4.862477397814)); +#883 = CARTESIAN_POINT('',(-0.222584572545,4.882843344071)); +#884 = CARTESIAN_POINT('',(-0.227078698121,4.903613944102)); +#885 = CARTESIAN_POINT('',(-0.231026814696,4.924724348878)); +#886 = CARTESIAN_POINT('',(-0.234447040976,4.946110563796)); +#887 = CARTESIAN_POINT('',(-0.237357169239,4.967702430067)); +#888 = CARTESIAN_POINT('',(-0.239776647236,4.989453591221)); +#889 = CARTESIAN_POINT('',(-0.24171833207,5.011228645698)); +#890 = CARTESIAN_POINT('',(-0.243220694616,5.033239487227)); +#891 = CARTESIAN_POINT('',(-0.244293545328,5.055577584573)); +#892 = CARTESIAN_POINT('',(-0.244935892917,5.078181023672)); +#893 = CARTESIAN_POINT('',(-0.24507839763,5.09341313178)); +#894 = CARTESIAN_POINT('',(-0.245078398719,5.101064570117)); +#895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#896 = ORIENTED_EDGE('',*,*,#897,.T.); +#897 = EDGE_CURVE('',#711,#22,#898,.T.); +#898 = SURFACE_CURVE('',#899,(#904,#911),.PCURVE_S1.); +#899 = CIRCLE('',#900,44.); +#900 = AXIS2_PLACEMENT_3D('',#901,#902,#903); +#901 = CARTESIAN_POINT('',(7.943771349938,39.237690372728, + 10.164733552926)); +#902 = DIRECTION('',(-1.346565956382E-15,1.,-1.798561679543E-16)); +#903 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#904 = PCURVE('',#33,#905); +#905 = DEFINITIONAL_REPRESENTATION('',(#906),#910); +#906 = LINE('',#907,#908); +#907 = CARTESIAN_POINT('',(-3.926990817006,-1.570796326795)); +#908 = VECTOR('',#909,1.); +#909 = DIRECTION('',(-1.,-3.382099539823E-14)); +#910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#911 = PCURVE('',#912,#917); +#912 = CYLINDRICAL_SURFACE('',#913,44.); +#913 = AXIS2_PLACEMENT_3D('',#914,#915,#916); +#914 = CARTESIAN_POINT('',(7.943771199795,31.936891185329, + 10.164733552925)); +#915 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#916 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#917 = DEFINITIONAL_REPRESENTATION('',(#918),#921); +#918 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#919,#920),.UNSPECIFIED.,.F.,.F., + (2,2),(2.826458787454,3.14159265359),.PIECEWISE_BEZIER_KNOTS.); +#919 = CARTESIAN_POINT('',(-2.826458786397,-7.300799187398)); +#920 = CARTESIAN_POINT('',(-3.14159265359,-7.300799187398)); +#921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#922 = ADVANCED_FACE('',(#923),#155,.F.); +#923 = FACE_BOUND('',#924,.F.); +#924 = EDGE_LOOP('',(#925,#960,#981,#982)); +#925 = ORIENTED_EDGE('',*,*,#926,.T.); +#926 = EDGE_CURVE('',#927,#929,#931,.T.); +#927 = VERTEX_POINT('',#928); +#928 = CARTESIAN_POINT('',(-36.05622880019,34.537690372729, + 10.664733552925)); +#929 = VERTEX_POINT('',#930); +#930 = CARTESIAN_POINT('',(-36.05622880011,38.537690372729, + 10.664733552925)); +#931 = SURFACE_CURVE('',#932,(#937,#948),.PCURVE_S1.); +#932 = CIRCLE('',#933,2.); +#933 = AXIS2_PLACEMENT_3D('',#934,#935,#936); +#934 = CARTESIAN_POINT('',(-36.05622865001,36.537690372729, + 10.664733552925)); +#935 = DIRECTION('',(7.573064690122E-29,2.442490654279E-15,-1.)); +#936 = DIRECTION('',(-1.803187229162E-14,-1.,-2.442490654279E-15)); +#937 = PCURVE('',#155,#938); +#938 = DEFINITIONAL_REPRESENTATION('',(#939),#947); +#939 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#940,#941,#942,#943,#944,#945 +,#946),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#940 = CARTESIAN_POINT('',(-6.349201120005,-2.46714015005)); +#941 = CARTESIAN_POINT('',(-6.349201120005,0.996961465088)); +#942 = CARTESIAN_POINT('',(-3.349201120005,-0.735089342481)); +#943 = CARTESIAN_POINT('',(-0.349201120005,-2.46714015005)); +#944 = CARTESIAN_POINT('',(-3.349201120005,-4.199190957619)); +#945 = CARTESIAN_POINT('',(-6.349201120005,-5.931241765188)); +#946 = CARTESIAN_POINT('',(-6.349201120005,-2.46714015005)); +#947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#948 = PCURVE('',#949,#954); +#949 = CYLINDRICAL_SURFACE('',#950,2.); +#950 = AXIS2_PLACEMENT_3D('',#951,#952,#953); +#951 = CARTESIAN_POINT('',(-36.05622865001,36.537690372729, + 10.164733552925)); +#952 = DIRECTION('',(-0.,-8.881784197001E-15,1.)); +#953 = DIRECTION('',(-1.803187229162E-14,-1.,-8.881784197001E-15)); +#954 = DEFINITIONAL_REPRESENTATION('',(#955),#959); +#955 = LINE('',#956,#957); +#956 = CARTESIAN_POINT('',(-5.000629485378E-14,0.5)); +#957 = VECTOR('',#958,1.); +#958 = DIRECTION('',(-1.,-7.916047585513E-15)); +#959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#960 = ORIENTED_EDGE('',*,*,#961,.T.); +#961 = EDGE_CURVE('',#929,#24,#962,.T.); +#962 = SURFACE_CURVE('',#963,(#967,#974),.PCURVE_S1.); +#963 = LINE('',#964,#965); +#964 = CARTESIAN_POINT('',(-36.0562288002,33.937690372729, + 10.664733552925)); +#965 = VECTOR('',#966,1.); +#966 = DIRECTION('',(1.962809366573E-11,1.,2.442490654279E-15)); +#967 = PCURVE('',#155,#968); +#968 = DEFINITIONAL_REPRESENTATION('',(#969),#973); +#969 = LINE('',#970,#971); +#970 = CARTESIAN_POINT('',(-6.949201120005,-2.46713999986)); +#971 = VECTOR('',#972,1.); +#972 = DIRECTION('',(1.,-1.961006179344E-11)); +#973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#974 = PCURVE('',#67,#975); +#975 = DEFINITIONAL_REPRESENTATION('',(#976),#980); +#976 = LINE('',#977,#978); +#977 = CARTESIAN_POINT('',(-9.299201150341,0.5)); +#978 = VECTOR('',#979,1.); +#979 = DIRECTION('',(1.,-0.)); +#980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#981 = ORIENTED_EDGE('',*,*,#80,.F.); +#982 = ORIENTED_EDGE('',*,*,#983,.T.); +#983 = EDGE_CURVE('',#81,#927,#984,.T.); +#984 = SURFACE_CURVE('',#985,(#989,#996),.PCURVE_S1.); +#985 = LINE('',#986,#987); +#986 = CARTESIAN_POINT('',(-36.0562288002,33.937690372729, + 10.664733552925)); +#987 = VECTOR('',#988,1.); +#988 = DIRECTION('',(1.962809366573E-11,1.,2.442490654279E-15)); +#989 = PCURVE('',#155,#990); +#990 = DEFINITIONAL_REPRESENTATION('',(#991),#995); +#991 = LINE('',#992,#993); +#992 = CARTESIAN_POINT('',(-6.949201120005,-2.46713999986)); +#993 = VECTOR('',#994,1.); +#994 = DIRECTION('',(1.,-1.961006179344E-11)); +#995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#996 = PCURVE('',#221,#997); +#997 = DEFINITIONAL_REPRESENTATION('',(#998),#1002); +#998 = LINE('',#999,#1000); +#999 = CARTESIAN_POINT('',(-0.6,0.5)); +#1000 = VECTOR('',#1001,1.); +#1001 = DIRECTION('',(1.,-0.)); +#1002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1003 = ADVANCED_FACE('',(#1004),#221,.T.); +#1004 = FACE_BOUND('',#1005,.F.); +#1005 = EDGE_LOOP('',(#1006,#1007,#1008,#1031,#1059,#1087)); +#1006 = ORIENTED_EDGE('',*,*,#983,.F.); +#1007 = ORIENTED_EDGE('',*,*,#182,.T.); +#1008 = ORIENTED_EDGE('',*,*,#1009,.T.); +#1009 = EDGE_CURVE('',#183,#1010,#1012,.T.); +#1010 = VERTEX_POINT('',#1011); +#1011 = CARTESIAN_POINT('',(-36.0562288002,31.936891185329, + 10.164733552925)); +#1012 = SURFACE_CURVE('',#1013,(#1017,#1024),.PCURVE_S1.); +#1013 = LINE('',#1014,#1015); +#1014 = CARTESIAN_POINT('',(-36.0562288002,31.936891185329, + 10.164733552925)); +#1015 = VECTOR('',#1016,1.); +#1016 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#1017 = PCURVE('',#221,#1018); +#1018 = DEFINITIONAL_REPRESENTATION('',(#1019),#1023); +#1019 = LINE('',#1020,#1021); +#1020 = CARTESIAN_POINT('',(-2.6007991874,6.352427708881E-15)); +#1021 = VECTOR('',#1022,1.); +#1022 = DIRECTION('',(-1.,2.622346822233E-15)); +#1023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1024 = PCURVE('',#251,#1025); +#1025 = DEFINITIONAL_REPRESENTATION('',(#1026),#1030); +#1026 = LINE('',#1027,#1028); +#1027 = CARTESIAN_POINT('',(-3.14159265359,3.552713678801E-14)); +#1028 = VECTOR('',#1029,1.); +#1029 = DIRECTION('',(-0.,1.)); +#1030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1031 = ORIENTED_EDGE('',*,*,#1032,.T.); +#1032 = EDGE_CURVE('',#1010,#1033,#1035,.T.); +#1033 = VERTEX_POINT('',#1034); +#1034 = CARTESIAN_POINT('',(-36.0562288002,31.93689118533, + 12.664733552925)); +#1035 = SURFACE_CURVE('',#1036,(#1040,#1047),.PCURVE_S1.); +#1036 = LINE('',#1037,#1038); +#1037 = CARTESIAN_POINT('',(-36.0562288002,31.93689118533, + 10.164733552925)); +#1038 = VECTOR('',#1039,1.); +#1039 = DIRECTION('',(-0.,-8.881784197001E-15,1.)); +#1040 = PCURVE('',#221,#1041); +#1041 = DEFINITIONAL_REPRESENTATION('',(#1042),#1046); +#1042 = LINE('',#1043,#1044); +#1043 = CARTESIAN_POINT('',(-2.600799187399,6.352427708878E-15)); +#1044 = VECTOR('',#1045,1.); +#1045 = DIRECTION('',(-6.439293542722E-15,1.)); +#1046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1047 = PCURVE('',#1048,#1053); +#1048 = PLANE('',#1049); +#1049 = AXIS2_PLACEMENT_3D('',#1050,#1051,#1052); +#1050 = CARTESIAN_POINT('',(-1.777008800213,31.936891185328, + -38.93526644707)); +#1051 = DIRECTION('',(5.793923192881E-15,1.,-1.170162602407E-14)); +#1052 = DIRECTION('',(-1.20396233056E-14,-1.170162602407E-14,-1.)); +#1053 = DEFINITIONAL_REPRESENTATION('',(#1054),#1058); +#1054 = LINE('',#1055,#1056); +#1055 = CARTESIAN_POINT('',(-49.09999999999,34.279219999988)); +#1056 = VECTOR('',#1057,1.); +#1057 = DIRECTION('',(-1.,1.20396233056E-14)); +#1058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1059 = ORIENTED_EDGE('',*,*,#1060,.F.); +#1060 = EDGE_CURVE('',#1061,#1033,#1063,.T.); +#1061 = VERTEX_POINT('',#1062); +#1062 = CARTESIAN_POINT('',(-36.05622880019,34.537690372729, + 12.664733552925)); +#1063 = SURFACE_CURVE('',#1064,(#1068,#1075),.PCURVE_S1.); +#1064 = LINE('',#1065,#1066); +#1065 = CARTESIAN_POINT('',(-36.0562288002,33.937690372729, + 12.664733552925)); +#1066 = VECTOR('',#1067,1.); +#1067 = DIRECTION('',(-1.962809366573E-11,-1.,-2.442490654279E-15)); +#1068 = PCURVE('',#221,#1069); +#1069 = DEFINITIONAL_REPRESENTATION('',(#1070),#1074); +#1070 = LINE('',#1071,#1072); +#1071 = CARTESIAN_POINT('',(-0.6,2.5)); +#1072 = VECTOR('',#1073,1.); +#1073 = DIRECTION('',(-1.,0.)); +#1074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1075 = PCURVE('',#1076,#1081); +#1076 = PLANE('',#1077); +#1077 = AXIS2_PLACEMENT_3D('',#1078,#1079,#1080); +#1078 = CARTESIAN_POINT('',(-38.52336880006,40.886891492734, + 12.664733552925)); +#1079 = DIRECTION('',(1.230623012145E-28,-6.881608909096E-15,1.)); +#1080 = DIRECTION('',(1.803187229162E-14,1.,6.881608909096E-15)); +#1081 = DEFINITIONAL_REPRESENTATION('',(#1082),#1086); +#1082 = LINE('',#1083,#1084); +#1083 = CARTESIAN_POINT('',(-6.949201120005,-2.46713999986)); +#1084 = VECTOR('',#1085,1.); +#1085 = DIRECTION('',(-1.,1.961006179344E-11)); +#1086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1087 = ORIENTED_EDGE('',*,*,#1088,.F.); +#1088 = EDGE_CURVE('',#927,#1061,#1089,.T.); +#1089 = SURFACE_CURVE('',#1090,(#1094,#1101),.PCURVE_S1.); +#1090 = LINE('',#1091,#1092); +#1091 = CARTESIAN_POINT('',(-36.05622880019,34.537690372729, + 10.164733552925)); +#1092 = VECTOR('',#1093,1.); +#1093 = DIRECTION('',(-0.,-8.881784197001E-15,1.)); +#1094 = PCURVE('',#221,#1095); +#1095 = DEFINITIONAL_REPRESENTATION('',(#1096),#1100); +#1096 = LINE('',#1097,#1098); +#1097 = CARTESIAN_POINT('',(0.,-0.)); +#1098 = VECTOR('',#1099,1.); +#1099 = DIRECTION('',(-6.439293542722E-15,1.)); +#1100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1101 = PCURVE('',#949,#1102); +#1102 = DEFINITIONAL_REPRESENTATION('',(#1103),#1107); +#1103 = LINE('',#1104,#1105); +#1104 = CARTESIAN_POINT('',(-7.508928234756E-08,1.7763568394E-14)); +#1105 = VECTOR('',#1106,1.); +#1106 = DIRECTION('',(-1.323488980085E-22,1.)); +#1107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1108 = ADVANCED_FACE('',(#1109),#251,.F.); +#1109 = FACE_BOUND('',#1110,.T.); +#1110 = EDGE_LOOP('',(#1111,#1112,#1140,#1161)); +#1111 = ORIENTED_EDGE('',*,*,#1009,.T.); +#1112 = ORIENTED_EDGE('',*,*,#1113,.T.); +#1113 = EDGE_CURVE('',#1010,#1114,#1116,.T.); +#1114 = VERTEX_POINT('',#1115); +#1115 = CARTESIAN_POINT('',(7.943771199793,31.936891185328, + -33.83526644707)); +#1116 = SURFACE_CURVE('',#1117,(#1122,#1129),.PCURVE_S1.); +#1117 = CIRCLE('',#1118,44.); +#1118 = AXIS2_PLACEMENT_3D('',#1119,#1120,#1121); +#1119 = CARTESIAN_POINT('',(7.943771199795,31.936891185329, + 10.164733552925)); +#1120 = DIRECTION('',(-5.793923192881E-15,-1.,1.170162602407E-14)); +#1121 = DIRECTION('',(1.,-5.793923192881E-15,2.831068712793E-14)); +#1122 = PCURVE('',#251,#1123); +#1123 = DEFINITIONAL_REPRESENTATION('',(#1124),#1128); +#1124 = LINE('',#1125,#1126); +#1125 = CARTESIAN_POINT('',(-6.28318530718,-1.264766069653E-12)); +#1126 = VECTOR('',#1127,1.); +#1127 = DIRECTION('',(1.,5.247208434486E-13)); +#1128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1129 = PCURVE('',#1048,#1130); +#1130 = DEFINITIONAL_REPRESENTATION('',(#1131),#1139); +#1131 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1132,#1133,#1134,#1135, +#1136,#1137,#1138),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1132 = CARTESIAN_POINT('',(-49.09999999999,-53.72078)); +#1133 = CARTESIAN_POINT('',(-125.310235533,-53.72078)); +#1134 = CARTESIAN_POINT('',(-87.20511776651,12.279219999994)); +#1135 = CARTESIAN_POINT('',(-49.09999999999,78.279219999993)); +#1136 = CARTESIAN_POINT('',(-10.99488223347,12.279219999991)); +#1137 = CARTESIAN_POINT('',(27.110235533034,-53.72078000001)); +#1138 = CARTESIAN_POINT('',(-49.09999999999,-53.72078)); +#1139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1140 = ORIENTED_EDGE('',*,*,#1141,.T.); +#1141 = EDGE_CURVE('',#1114,#235,#1142,.T.); +#1142 = SURFACE_CURVE('',#1143,(#1147,#1154),.PCURVE_S1.); +#1143 = LINE('',#1144,#1145); +#1144 = CARTESIAN_POINT('',(7.943771350024,31.936891185329, + -33.83526644707)); +#1145 = VECTOR('',#1146,1.); +#1146 = DIRECTION('',(-1.346565956382E-15,1.,-1.798561679543E-16)); +#1147 = PCURVE('',#251,#1148); +#1148 = DEFINITIONAL_REPRESENTATION('',(#1149),#1153); +#1149 = LINE('',#1150,#1151); +#1150 = CARTESIAN_POINT('',(-1.570796323381,-7.105427155305E-15)); +#1151 = VECTOR('',#1152,1.); +#1152 = DIRECTION('',(-0.,-1.)); +#1153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1154 = PCURVE('',#301,#1155); +#1155 = DEFINITIONAL_REPRESENTATION('',(#1156),#1160); +#1156 = LINE('',#1157,#1158); +#1157 = CARTESIAN_POINT('',(-1.001865257422E-12,1.349077648526E-27)); +#1158 = VECTOR('',#1159,1.); +#1159 = DIRECTION('',(-1.,-4.44112763435E-32)); +#1160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1161 = ORIENTED_EDGE('',*,*,#234,.F.); +#1162 = ADVANCED_FACE('',(#1163),#301,.T.); +#1163 = FACE_BOUND('',#1164,.F.); +#1164 = EDGE_LOOP('',(#1165,#1166,#1189,#1217,#1245,#1266)); +#1165 = ORIENTED_EDGE('',*,*,#262,.T.); +#1166 = ORIENTED_EDGE('',*,*,#1167,.F.); +#1167 = EDGE_CURVE('',#1168,#263,#1170,.T.); +#1168 = VERTEX_POINT('',#1169); +#1169 = CARTESIAN_POINT('',(8.443771349935,34.537690372728, + -33.83526644707)); +#1170 = SURFACE_CURVE('',#1171,(#1175,#1182),.PCURVE_S1.); +#1171 = LINE('',#1172,#1173); +#1172 = CARTESIAN_POINT('',(8.443771349935,33.937690372728, + -33.83526644707)); +#1173 = VECTOR('',#1174,1.); +#1174 = DIRECTION('',(4.927146822275E-16,-1.,5.272907245955E-15)); +#1175 = PCURVE('',#301,#1176); +#1176 = DEFINITIONAL_REPRESENTATION('',(#1177),#1181); +#1177 = LINE('',#1178,#1179); +#1178 = CARTESIAN_POINT('',(-2.0007991874,0.499999999911)); +#1179 = VECTOR('',#1180,1.); +#1180 = DIRECTION('',(1.,-8.538512741494E-16)); +#1181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1182 = PCURVE('',#389,#1183); +#1183 = DEFINITIONAL_REPRESENTATION('',(#1184),#1188); +#1184 = LINE('',#1185,#1186); +#1185 = CARTESIAN_POINT('',(2.6,-1.3)); +#1186 = VECTOR('',#1187,1.); +#1187 = DIRECTION('',(1.,1.0248212535E-14)); +#1188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1189 = ORIENTED_EDGE('',*,*,#1190,.F.); +#1190 = EDGE_CURVE('',#1191,#1168,#1193,.T.); +#1191 = VERTEX_POINT('',#1192); +#1192 = CARTESIAN_POINT('',(10.443771349935,34.537690372728, + -33.83526644707)); +#1193 = SURFACE_CURVE('',#1194,(#1198,#1205),.PCURVE_S1.); +#1194 = LINE('',#1195,#1196); +#1195 = CARTESIAN_POINT('',(9.943771349935,34.537690372728, + -33.83526644707)); +#1196 = VECTOR('',#1197,1.); +#1197 = DIRECTION('',(-1.,-0.,-0.)); +#1198 = PCURVE('',#301,#1199); +#1199 = DEFINITIONAL_REPRESENTATION('',(#1200),#1204); +#1200 = LINE('',#1201,#1202); +#1201 = CARTESIAN_POINT('',(-2.6007991874,1.999999999911)); +#1202 = VECTOR('',#1203,1.); +#1203 = DIRECTION('',(-1.346565956382E-15,-1.)); +#1204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1205 = PCURVE('',#1206,#1211); +#1206 = CYLINDRICAL_SURFACE('',#1207,2.); +#1207 = AXIS2_PLACEMENT_3D('',#1208,#1209,#1210); +#1208 = CARTESIAN_POINT('',(9.943771349935,36.537690372728, + -33.83526644707)); +#1209 = DIRECTION('',(-1.,-0.,-0.)); +#1210 = DIRECTION('',(-0.,1.,-1.552111978096E-14)); +#1211 = DEFINITIONAL_REPRESENTATION('',(#1212),#1216); +#1212 = LINE('',#1213,#1214); +#1213 = CARTESIAN_POINT('',(-3.141592653588,-6.927791673661E-14)); +#1214 = VECTOR('',#1215,1.); +#1215 = DIRECTION('',(-0.,1.)); +#1216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1217 = ORIENTED_EDGE('',*,*,#1218,.F.); +#1218 = EDGE_CURVE('',#1219,#1191,#1221,.T.); +#1219 = VERTEX_POINT('',#1220); +#1220 = CARTESIAN_POINT('',(10.443771199793,31.936891185328, + -33.83526644707)); +#1221 = SURFACE_CURVE('',#1222,(#1226,#1233),.PCURVE_S1.); +#1222 = LINE('',#1223,#1224); +#1223 = CARTESIAN_POINT('',(10.443771350024,31.936891185329, + -33.83526644707)); +#1224 = VECTOR('',#1225,1.); +#1225 = DIRECTION('',(-1.346565956382E-15,1.,-1.798561679543E-16)); +#1226 = PCURVE('',#301,#1227); +#1227 = DEFINITIONAL_REPRESENTATION('',(#1228),#1232); +#1228 = LINE('',#1229,#1230); +#1229 = CARTESIAN_POINT('',(-9.984988425308E-13,2.5)); +#1230 = VECTOR('',#1231,1.); +#1231 = DIRECTION('',(-1.,-4.44112763435E-32)); +#1232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1233 = PCURVE('',#1234,#1239); +#1234 = PLANE('',#1235); +#1235 = AXIS2_PLACEMENT_3D('',#1236,#1237,#1238); +#1236 = CARTESIAN_POINT('',(10.443771350023,49.836891800137, + -33.13526644707)); +#1237 = DIRECTION('',(-1.,1.114188106856E-15,-9.96160529544E-13)); +#1238 = DIRECTION('',(9.96160529544E-13,-1.990744733811E-14,-1.)); +#1239 = DEFINITIONAL_REPRESENTATION('',(#1240),#1244); +#1240 = LINE('',#1241,#1242); +#1241 = CARTESIAN_POINT('',(0.7,17.900000614808)); +#1242 = VECTOR('',#1243,1.); +#1243 = DIRECTION('',(-1.972759117016E-14,-1.)); +#1244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1245 = ORIENTED_EDGE('',*,*,#1246,.F.); +#1246 = EDGE_CURVE('',#1114,#1219,#1247,.T.); +#1247 = SURFACE_CURVE('',#1248,(#1252,#1259),.PCURVE_S1.); +#1248 = LINE('',#1249,#1250); +#1249 = CARTESIAN_POINT('',(7.943771199793,31.936891185328, + -33.83526644707)); +#1250 = VECTOR('',#1251,1.); +#1251 = DIRECTION('',(1.,-2.22044604925E-15,9.969802761134E-13)); +#1252 = PCURVE('',#301,#1253); +#1253 = DEFINITIONAL_REPRESENTATION('',(#1254),#1258); +#1254 = LINE('',#1255,#1256); +#1255 = CARTESIAN_POINT('',(-2.02295950307E-22,-1.502310000845E-07)); +#1256 = VECTOR('',#1257,1.); +#1257 = DIRECTION('',(3.567012005632E-15,1.)); +#1258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1259 = PCURVE('',#1048,#1260); +#1260 = DEFINITIONAL_REPRESENTATION('',(#1261),#1265); +#1261 = LINE('',#1262,#1263); +#1262 = CARTESIAN_POINT('',(-5.1,-9.720780000006)); +#1263 = VECTOR('',#1264,1.); +#1264 = DIRECTION('',(-1.009019899419E-12,-1.)); +#1265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1266 = ORIENTED_EDGE('',*,*,#1141,.T.); +#1267 = ADVANCED_FACE('',(#1268),#389,.F.); +#1268 = FACE_BOUND('',#1269,.F.); +#1269 = EDGE_LOOP('',(#1270,#1298,#1299,#1300)); +#1270 = ORIENTED_EDGE('',*,*,#1271,.T.); +#1271 = EDGE_CURVE('',#1272,#1168,#1274,.T.); +#1272 = VERTEX_POINT('',#1273); +#1273 = CARTESIAN_POINT('',(8.443771349935,38.537690372728, + -33.83526644707)); +#1274 = SURFACE_CURVE('',#1275,(#1280,#1291),.PCURVE_S1.); +#1275 = CIRCLE('',#1276,2.); +#1276 = AXIS2_PLACEMENT_3D('',#1277,#1278,#1279); +#1277 = CARTESIAN_POINT('',(8.443771349935,36.537690372728, + -33.83526644707)); +#1278 = DIRECTION('',(-1.,-4.927146840776E-16,-1.38917290594E-16)); +#1279 = DIRECTION('',(-4.927146840776E-16,1.,-1.552111978096E-14)); +#1280 = PCURVE('',#389,#1281); +#1281 = DEFINITIONAL_REPRESENTATION('',(#1282),#1290); +#1282 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1283,#1284,#1285,#1286, +#1287,#1288,#1289),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1283 = CARTESIAN_POINT('',(-2.,-1.3)); +#1284 = CARTESIAN_POINT('',(-2.,2.164101615138)); +#1285 = CARTESIAN_POINT('',(1.,0.432050807569)); +#1286 = CARTESIAN_POINT('',(4.,-1.3)); +#1287 = CARTESIAN_POINT('',(1.,-3.032050807569)); +#1288 = CARTESIAN_POINT('',(-2.,-4.764101615138)); +#1289 = CARTESIAN_POINT('',(-2.,-1.3)); +#1290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1291 = PCURVE('',#1206,#1292); +#1292 = DEFINITIONAL_REPRESENTATION('',(#1293),#1297); +#1293 = LINE('',#1294,#1295); +#1294 = CARTESIAN_POINT('',(-6.28318530718,1.5)); +#1295 = VECTOR('',#1296,1.); +#1296 = DIRECTION('',(1.,-1.130863886742E-15)); +#1297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1298 = ORIENTED_EDGE('',*,*,#1167,.T.); +#1299 = ORIENTED_EDGE('',*,*,#314,.F.); +#1300 = ORIENTED_EDGE('',*,*,#1301,.T.); +#1301 = EDGE_CURVE('',#315,#1272,#1302,.T.); +#1302 = SURFACE_CURVE('',#1303,(#1307,#1314),.PCURVE_S1.); +#1303 = LINE('',#1304,#1305); +#1304 = CARTESIAN_POINT('',(8.443771349935,33.937690372728, + -33.83526644707)); +#1305 = VECTOR('',#1306,1.); +#1306 = DIRECTION('',(4.927146822275E-16,-1.,5.272907245955E-15)); +#1307 = PCURVE('',#389,#1308); +#1308 = DEFINITIONAL_REPRESENTATION('',(#1309),#1313); +#1309 = LINE('',#1310,#1311); +#1310 = CARTESIAN_POINT('',(2.6,-1.3)); +#1311 = VECTOR('',#1312,1.); +#1312 = DIRECTION('',(1.,1.0248212535E-14)); +#1313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1314 = PCURVE('',#455,#1315); +#1315 = DEFINITIONAL_REPRESENTATION('',(#1316),#1320); +#1316 = LINE('',#1317,#1318); +#1317 = CARTESIAN_POINT('',(5.2,0.499999999911)); +#1318 = VECTOR('',#1319,1.); +#1319 = DIRECTION('',(1.,-8.538512741494E-16)); +#1320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1321 = ADVANCED_FACE('',(#1322),#455,.T.); +#1322 = FACE_BOUND('',#1323,.F.); +#1323 = EDGE_LOOP('',(#1324,#1325,#1348,#1400,#1428,#1456,#1479,#1500)); +#1324 = ORIENTED_EDGE('',*,*,#416,.T.); +#1325 = ORIENTED_EDGE('',*,*,#1326,.T.); +#1326 = EDGE_CURVE('',#417,#1327,#1329,.T.); +#1327 = VERTEX_POINT('',#1328); +#1328 = CARTESIAN_POINT('',(7.943771350024,42.536891523071, + -33.83526644707)); +#1329 = SURFACE_CURVE('',#1330,(#1334,#1341),.PCURVE_S1.); +#1330 = LINE('',#1331,#1332); +#1331 = CARTESIAN_POINT('',(7.943771350024,31.936891185329, + -33.83526644707)); +#1332 = VECTOR('',#1333,1.); +#1333 = DIRECTION('',(-1.346565956382E-15,1.,-1.798561679543E-16)); +#1334 = PCURVE('',#455,#1335); +#1335 = DEFINITIONAL_REPRESENTATION('',(#1336),#1340); +#1336 = LINE('',#1337,#1338); +#1337 = CARTESIAN_POINT('',(7.200799187399,-9.696351044496E-15)); +#1338 = VECTOR('',#1339,1.); +#1339 = DIRECTION('',(-1.,-4.44112763435E-32)); +#1340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1341 = PCURVE('',#485,#1342); +#1342 = DEFINITIONAL_REPRESENTATION('',(#1343),#1347); +#1343 = LINE('',#1344,#1345); +#1344 = CARTESIAN_POINT('',(-1.570796323381,-7.105427357601E-15)); +#1345 = VECTOR('',#1346,1.); +#1346 = DIRECTION('',(-0.,-1.)); +#1347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1348 = ORIENTED_EDGE('',*,*,#1349,.T.); +#1349 = EDGE_CURVE('',#1327,#1350,#1352,.T.); +#1350 = VERTEX_POINT('',#1351); +#1351 = CARTESIAN_POINT('',(8.44377135003,42.536893017561, + -33.83526644707)); +#1352 = SURFACE_CURVE('',#1353,(#1358,#1366),.PCURVE_S1.); +#1353 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1354,#1355,#1356,#1357), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.129080463504,3.178705217273), + .PIECEWISE_BEZIER_KNOTS.); +#1354 = CARTESIAN_POINT('',(7.94377135003,42.536891523071, + -33.83526644707)); +#1355 = CARTESIAN_POINT('',(8.109187195929,42.536891523071, + -33.83526644707)); +#1356 = CARTESIAN_POINT('',(8.275891285151,42.536891010465, + -33.83526644707)); +#1357 = CARTESIAN_POINT('',(8.44377135003,42.536893017561, + -33.83526644707)); +#1358 = PCURVE('',#455,#1359); +#1359 = DEFINITIONAL_REPRESENTATION('',(#1360),#1365); +#1360 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1361,#1362,#1363,#1364), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.129080463504,3.178705217273), + .PIECEWISE_BEZIER_KNOTS.); +#1361 = CARTESIAN_POINT('',(-3.399201150343,6.004086117173E-12)); +#1362 = CARTESIAN_POINT('',(-3.399201150343,0.165415845905)); +#1363 = CARTESIAN_POINT('',(-3.399200637737,0.332119935127)); +#1364 = CARTESIAN_POINT('',(-3.399202644833,0.500000000006)); +#1365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1366 = PCURVE('',#1367,#1372); +#1367 = TOROIDAL_SURFACE('',#1368,44.,2.7); +#1368 = AXIS2_PLACEMENT_3D('',#1369,#1370,#1371); +#1369 = CARTESIAN_POINT('',(7.943771349986,45.23689152307, + 10.164733552923)); +#1370 = DIRECTION('',(1.839280640477E-15,-1.,-1.822212228843E-14)); +#1371 = DIRECTION('',(-0.707106781172,1.158441842466E-14,-0.707106781201 + )); +#1372 = DEFINITIONAL_REPRESENTATION('',(#1373),#1399); +#1373 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1374,#1375,#1376,#1377,#1378, + #1379,#1380,#1381,#1382,#1383,#1384,#1385,#1386,#1387,#1388,#1389, + #1390,#1391,#1392,#1393,#1394,#1395,#1396,#1397,#1398), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (3.129080463504,3.13133613413,3.133591804756,3.135847475382, + 3.138103146007,3.140358816633,3.142614487259,3.144870157885, + 3.147125828511,3.149381499137,3.151637169763,3.153892840389, + 3.156148511014,3.15840418164,3.160659852266,3.162915522892, + 3.165171193518,3.167426864144,3.16968253477,3.171938205395, + 3.174193876021,3.176449546647,3.178705217273), + .QUASI_UNIFORM_KNOTS.); +#1374 = CARTESIAN_POINT('',(0.785398163378,1.570796326798)); +#1375 = CARTESIAN_POINT('',(0.785569047516,1.570796326801)); +#1376 = CARTESIAN_POINT('',(0.785910936778,1.570794899171)); +#1377 = CARTESIAN_POINT('',(0.786424131915,1.570788465788)); +#1378 = CARTESIAN_POINT('',(0.78693768659,1.570777731425)); +#1379 = CARTESIAN_POINT('',(0.787451599092,1.570762687101)); +#1380 = CARTESIAN_POINT('',(0.787965867709,1.570743323877)); +#1381 = CARTESIAN_POINT('',(0.78848049073,1.570719632861)); +#1382 = CARTESIAN_POINT('',(0.788995466441,1.570691605204)); +#1383 = CARTESIAN_POINT('',(0.789510793127,1.570659232104)); +#1384 = CARTESIAN_POINT('',(0.790026469073,1.570622504805)); +#1385 = CARTESIAN_POINT('',(0.790542492562,1.570581414596)); +#1386 = CARTESIAN_POINT('',(0.791058861877,1.570535952813)); +#1387 = CARTESIAN_POINT('',(0.791575575298,1.570486110836)); +#1388 = CARTESIAN_POINT('',(0.792092631106,1.570431880093)); +#1389 = CARTESIAN_POINT('',(0.792610027579,1.570373252056)); +#1390 = CARTESIAN_POINT('',(0.793127762995,1.570310218247)); +#1391 = CARTESIAN_POINT('',(0.793645835632,1.57024277023)); +#1392 = CARTESIAN_POINT('',(0.794164243765,1.570170899617)); +#1393 = CARTESIAN_POINT('',(0.794682985669,1.57009459807)); +#1394 = CARTESIAN_POINT('',(0.795202059618,1.570013857292)); +#1395 = CARTESIAN_POINT('',(0.795721463884,1.569928669037)); +#1396 = CARTESIAN_POINT('',(0.796241196739,1.569839025102)); +#1397 = CARTESIAN_POINT('',(0.796587903216,1.569776286598)); +#1398 = CARTESIAN_POINT('',(0.796761310642,1.569744172017)); +#1399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1400 = ORIENTED_EDGE('',*,*,#1401,.F.); +#1401 = EDGE_CURVE('',#1402,#1350,#1404,.T.); +#1402 = VERTEX_POINT('',#1403); +#1403 = CARTESIAN_POINT('',(8.443771349935,43.236891523071, + -33.83526644707)); +#1404 = SURFACE_CURVE('',#1405,(#1409,#1416),.PCURVE_S1.); +#1405 = LINE('',#1406,#1407); +#1406 = CARTESIAN_POINT('',(8.443771349935,42.636891523071, + -33.83526644707)); +#1407 = VECTOR('',#1408,1.); +#1408 = DIRECTION('',(4.927146840778E-16,-1.,-1.070789408929E-12)); +#1409 = PCURVE('',#455,#1410); +#1410 = DEFINITIONAL_REPRESENTATION('',(#1411),#1415); +#1411 = LINE('',#1412,#1413); +#1412 = CARTESIAN_POINT('',(-3.499201150343,0.499999999911)); +#1413 = VECTOR('',#1414,1.); +#1414 = DIRECTION('',(1.,-8.538512733719E-16)); +#1415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1416 = PCURVE('',#1417,#1422); +#1417 = PLANE('',#1418); +#1418 = AXIS2_PLACEMENT_3D('',#1419,#1420,#1421); +#1419 = CARTESIAN_POINT('',(8.443771349935,45.236891523071, + -35.13526644707)); +#1420 = DIRECTION('',(1.,4.927146840776E-16,1.38917290594E-16)); +#1421 = DIRECTION('',(4.927146840776E-16,-1.,1.552111978096E-14)); +#1422 = DEFINITIONAL_REPRESENTATION('',(#1423),#1427); +#1423 = LINE('',#1424,#1425); +#1424 = CARTESIAN_POINT('',(2.6,-1.3)); +#1425 = VECTOR('',#1426,1.); +#1426 = DIRECTION('',(1.,1.08631052871E-12)); +#1427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1428 = ORIENTED_EDGE('',*,*,#1429,.F.); +#1429 = EDGE_CURVE('',#1430,#1402,#1432,.T.); +#1430 = VERTEX_POINT('',#1431); +#1431 = CARTESIAN_POINT('',(10.443771349935,43.236891523071, + -33.83526644707)); +#1432 = SURFACE_CURVE('',#1433,(#1437,#1444),.PCURVE_S1.); +#1433 = LINE('',#1434,#1435); +#1434 = CARTESIAN_POINT('',(9.943771349935,43.236891523071, + -33.83526644707)); +#1435 = VECTOR('',#1436,1.); +#1436 = DIRECTION('',(-1.,-0.,-0.)); +#1437 = PCURVE('',#455,#1438); +#1438 = DEFINITIONAL_REPRESENTATION('',(#1439),#1443); +#1439 = LINE('',#1440,#1441); +#1440 = CARTESIAN_POINT('',(-4.099201150343,1.999999999911)); +#1441 = VECTOR('',#1442,1.); +#1442 = DIRECTION('',(-1.346565956382E-15,-1.)); +#1443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1444 = PCURVE('',#1445,#1450); +#1445 = CYLINDRICAL_SURFACE('',#1446,2.); +#1446 = AXIS2_PLACEMENT_3D('',#1447,#1448,#1449); +#1447 = CARTESIAN_POINT('',(9.943771349935,45.236891523071, + -33.83526644707)); +#1448 = DIRECTION('',(-1.,-0.,-0.)); +#1449 = DIRECTION('',(-0.,1.,-1.552111978096E-14)); +#1450 = DEFINITIONAL_REPRESENTATION('',(#1451),#1455); +#1451 = LINE('',#1452,#1453); +#1452 = CARTESIAN_POINT('',(-3.141592653591,-6.927791673661E-14)); +#1453 = VECTOR('',#1454,1.); +#1454 = DIRECTION('',(-0.,1.)); +#1455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1456 = ORIENTED_EDGE('',*,*,#1457,.F.); +#1457 = EDGE_CURVE('',#1458,#1430,#1460,.T.); +#1458 = VERTEX_POINT('',#1459); +#1459 = CARTESIAN_POINT('',(10.443771349935,38.537690372728, + -33.83526644707)); +#1460 = SURFACE_CURVE('',#1461,(#1465,#1472),.PCURVE_S1.); +#1461 = LINE('',#1462,#1463); +#1462 = CARTESIAN_POINT('',(10.443771349935,33.937690372728, + -33.83526644707)); +#1463 = VECTOR('',#1464,1.); +#1464 = DIRECTION('',(-4.927146822275E-16,1.,-5.272907245955E-15)); +#1465 = PCURVE('',#455,#1466); +#1466 = DEFINITIONAL_REPRESENTATION('',(#1467),#1471); +#1467 = LINE('',#1468,#1469); +#1468 = CARTESIAN_POINT('',(5.2,2.499999999911)); +#1469 = VECTOR('',#1470,1.); +#1470 = DIRECTION('',(-1.,8.538512741494E-16)); +#1471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1472 = PCURVE('',#1234,#1473); +#1473 = DEFINITIONAL_REPRESENTATION('',(#1474),#1478); +#1474 = LINE('',#1475,#1476); +#1475 = CARTESIAN_POINT('',(0.7,15.899201427409)); +#1476 = VECTOR('',#1477,1.); +#1477 = DIRECTION('',(-1.463454009216E-14,-1.)); +#1478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1479 = ORIENTED_EDGE('',*,*,#1480,.T.); +#1480 = EDGE_CURVE('',#1458,#1272,#1481,.T.); +#1481 = SURFACE_CURVE('',#1482,(#1486,#1493),.PCURVE_S1.); +#1482 = LINE('',#1483,#1484); +#1483 = CARTESIAN_POINT('',(9.943771349935,38.537690372728, + -33.83526644707)); +#1484 = VECTOR('',#1485,1.); +#1485 = DIRECTION('',(-1.,-0.,-0.)); +#1486 = PCURVE('',#455,#1487); +#1487 = DEFINITIONAL_REPRESENTATION('',(#1488),#1492); +#1488 = LINE('',#1489,#1490); +#1489 = CARTESIAN_POINT('',(0.6,1.999999999911)); +#1490 = VECTOR('',#1491,1.); +#1491 = DIRECTION('',(-1.346565956382E-15,-1.)); +#1492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1493 = PCURVE('',#1206,#1494); +#1494 = DEFINITIONAL_REPRESENTATION('',(#1495),#1499); +#1495 = LINE('',#1496,#1497); +#1496 = CARTESIAN_POINT('',(-6.28318530718,-6.927791673661E-14)); +#1497 = VECTOR('',#1498,1.); +#1498 = DIRECTION('',(-0.,1.)); +#1499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1500 = ORIENTED_EDGE('',*,*,#1301,.F.); +#1501 = ADVANCED_FACE('',(#1502),#485,.F.); +#1502 = FACE_BOUND('',#1503,.T.); +#1503 = EDGE_LOOP('',(#1504,#1505,#1529,#1603,#1675)); +#1504 = ORIENTED_EDGE('',*,*,#1326,.T.); +#1505 = ORIENTED_EDGE('',*,*,#1506,.F.); +#1506 = EDGE_CURVE('',#1507,#1327,#1509,.T.); +#1507 = VERTEX_POINT('',#1508); +#1508 = CARTESIAN_POINT('',(-5.623569591774,42.53689152307, + -31.69129664399)); +#1509 = SURFACE_CURVE('',#1510,(#1515,#1522),.PCURVE_S1.); +#1510 = CIRCLE('',#1511,44.); +#1511 = AXIS2_PLACEMENT_3D('',#1512,#1513,#1514); +#1512 = CARTESIAN_POINT('',(7.943771349986,42.53689152307, + 10.164733552923)); +#1513 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#1514 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#1515 = PCURVE('',#485,#1516); +#1516 = DEFINITIONAL_REPRESENTATION('',(#1517),#1521); +#1517 = LINE('',#1518,#1519); +#1518 = CARTESIAN_POINT('',(-6.283185303932,-10.60000033774)); +#1519 = VECTOR('',#1520,1.); +#1520 = DIRECTION('',(1.,-0.)); +#1521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1522 = PCURVE('',#1367,#1523); +#1523 = DEFINITIONAL_REPRESENTATION('',(#1524),#1528); +#1524 = LINE('',#1525,#1526); +#1525 = CARTESIAN_POINT('',(-3.926990817008,1.570796326795)); +#1526 = VECTOR('',#1527,1.); +#1527 = DIRECTION('',(1.,-2.833497137045E-15)); +#1528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1529 = ORIENTED_EDGE('',*,*,#1530,.F.); +#1530 = EDGE_CURVE('',#1531,#1507,#1533,.T.); +#1531 = VERTEX_POINT('',#1532); +#1532 = CARTESIAN_POINT('',(-4.332837108069,40.886891492734, + -32.08789818114)); +#1533 = SURFACE_CURVE('',#1534,(#1545,#1574),.PCURVE_S1.); +#1534 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1535,#1536,#1537,#1538,#1539, + #1540,#1541,#1542,#1543,#1544),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,4),(0. + ,6.463100744068E-02,0.129262014881,0.195848019826,0.220392705394), + .UNSPECIFIED.); +#1535 = CARTESIAN_POINT('',(-4.332837108069,40.886891492734, + -32.08789818114)); +#1536 = CARTESIAN_POINT('',(-4.332837108069,41.102328184202, + -32.08789818114)); +#1537 = CARTESIAN_POINT('',(-4.376343886155,41.331302583215, + -32.07533078989)); +#1538 = CARTESIAN_POINT('',(-4.550857268724,41.750145054888, + -32.02403901633)); +#1539 = CARTESIAN_POINT('',(-4.681807959978,41.940025400677, + -31.98522467309)); +#1540 = CARTESIAN_POINT('',(-4.984208657135,42.242426097834, + -31.89347673069)); +#1541 = CARTESIAN_POINT('',(-5.177239929284,42.373256232593, + -31.83392617985)); +#1542 = CARTESIAN_POINT('',(-5.464043172014,42.491088368811, + -31.74274887921)); +#1543 = CARTESIAN_POINT('',(-5.543473634035,42.517024448471, + -31.71725919107)); +#1544 = CARTESIAN_POINT('',(-5.623569591774,42.536891523069, + -31.69129664399)); +#1545 = PCURVE('',#485,#1546); +#1546 = DEFINITIONAL_REPRESENTATION('',(#1547),#1573); +#1547 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1548,#1549,#1550,#1551,#1552, + #1553,#1554,#1555,#1556,#1557,#1558,#1559,#1560,#1561,#1562,#1563, + #1564,#1565,#1566,#1567,#1568,#1569,#1570,#1571,#1572), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (0.,1.00178502452E-02,2.00357004904E-02,3.00535507356E-02, + 4.007140098079E-02,5.008925122599E-02,6.010710147119E-02, + 7.012495171639E-02,8.014280196159E-02,9.016065220679E-02, + 0.100178502452,0.110196352697,0.120214202942,0.130232053188, + 0.140249903433,0.150267753678,0.160285603923,0.170303454168, + 0.180321304414,0.190339154659,0.200357004904,0.210374855149, + 0.220392705394),.UNSPECIFIED.); +#1548 = CARTESIAN_POINT('',(-1.853563324232,-8.950000307404)); +#1549 = CARTESIAN_POINT('',(-1.85356332424,-8.983393141555)); +#1550 = CARTESIAN_POINT('',(-1.853612778742,-9.050829297015)); +#1551 = CARTESIAN_POINT('',(-1.853835512449,-9.153195673056)); +#1552 = CARTESIAN_POINT('',(-1.854206996607,-9.25603467838)); +#1553 = CARTESIAN_POINT('',(-1.854727394692,-9.358607481727)); +#1554 = CARTESIAN_POINT('',(-1.855397001584,-9.460172717547)); +#1555 = CARTESIAN_POINT('',(-1.8562156233,-9.559998475143)); +#1556 = CARTESIAN_POINT('',(-1.85718489149,-9.657317558691)); +#1557 = CARTESIAN_POINT('',(-1.858297284511,-9.751539169611)); +#1558 = CARTESIAN_POINT('',(-1.859537967205,-9.842206515459)); +#1559 = CARTESIAN_POINT('',(-1.860894063387,-9.928846757899)); +#1560 = CARTESIAN_POINT('',(-1.862350975821,-10.01094022605)); +#1561 = CARTESIAN_POINT('',(-1.863899038133,-10.0881706251)); +#1562 = CARTESIAN_POINT('',(-1.865510588593,-10.15945498857)); +#1563 = CARTESIAN_POINT('',(-1.867226885287,-10.2266532341)); +#1564 = CARTESIAN_POINT('',(-1.869065710444,-10.29054346403)); +#1565 = CARTESIAN_POINT('',(-1.871008309846,-10.35034397207)); +#1566 = CARTESIAN_POINT('',(-1.873045708025,-10.40569270898)); +#1567 = CARTESIAN_POINT('',(-1.875166360702,-10.45610880595)); +#1568 = CARTESIAN_POINT('',(-1.877359232062,-10.50116701546)); +#1569 = CARTESIAN_POINT('',(-1.879613836036,-10.54033842432)); +#1570 = CARTESIAN_POINT('',(-1.881915739236,-10.57365333418)); +#1571 = CARTESIAN_POINT('',(-1.883471918869,-10.59188802516)); +#1572 = CARTESIAN_POINT('',(-1.884252938021,-10.60000033773)); +#1573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1574 = PCURVE('',#604,#1575); +#1575 = DEFINITIONAL_REPRESENTATION('',(#1576),#1602); +#1576 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1577,#1578,#1579,#1580,#1581, + #1582,#1583,#1584,#1585,#1586,#1587,#1588,#1589,#1590,#1591,#1592, + #1593,#1594,#1595,#1596,#1597,#1598,#1599,#1600,#1601), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (0.,1.00178502452E-02,2.00357004904E-02,3.00535507356E-02, + 4.007140098079E-02,5.008925122599E-02,6.010710147119E-02, + 7.012495171639E-02,8.014280196159E-02,9.016065220679E-02, + 0.100178502452,0.110196352697,0.120214202942,0.130232053188, + 0.140249903433,0.150267753678,0.160285603923,0.170303454168, + 0.180321304414,0.190339154659,0.200357004904,0.210374855149, + 0.220392705394),.UNSPECIFIED.); +#1577 = CARTESIAN_POINT('',(-9.424777960769,1.847368265913)); +#1578 = CARTESIAN_POINT('',(-9.405136034747,1.847368265913)); +#1579 = CARTESIAN_POINT('',(-9.365465807041,1.847972137517)); +#1580 = CARTESIAN_POINT('',(-9.305015437006,1.850700951372)); +#1581 = CARTESIAN_POINT('',(-9.243832125918,1.855264276285)); +#1582 = CARTESIAN_POINT('',(-9.18213499998,1.861673221469)); +#1583 = CARTESIAN_POINT('',(-9.120134005876,1.869940364752)); +#1584 = CARTESIAN_POINT('',(-9.058020153134,1.880072804897)); +#1585 = CARTESIAN_POINT('',(-8.995953521994,1.892098088307)); +#1586 = CARTESIAN_POINT('',(-8.934057112684,1.905952234864)); +#1587 = CARTESIAN_POINT('',(-8.872489677676,1.921465243616)); +#1588 = CARTESIAN_POINT('',(-8.811433105359,1.938493475103)); +#1589 = CARTESIAN_POINT('',(-8.751136492805,1.956870903333)); +#1590 = CARTESIAN_POINT('',(-8.691690308746,1.976494686947)); +#1591 = CARTESIAN_POINT('',(-8.633819701036,1.997031632588)); +#1592 = CARTESIAN_POINT('',(-8.57580791123,2.019030580243)); +#1593 = CARTESIAN_POINT('',(-8.516807066865,2.042739308241)); +#1594 = CARTESIAN_POINT('',(-8.457271628955,2.067938008879)); +#1595 = CARTESIAN_POINT('',(-8.397313561337,2.094531924092)); +#1596 = CARTESIAN_POINT('',(-8.337131786748,2.122393683297)); +#1597 = CARTESIAN_POINT('',(-8.276884924697,2.151401316338)); +#1598 = CARTESIAN_POINT('',(-8.216715528389,2.181443863876)); +#1599 = CARTESIAN_POINT('',(-8.156712848609,2.212337768578)); +#1600 = CARTESIAN_POINT('',(-8.116929374945,2.233373524202)); +#1601 = CARTESIAN_POINT('',(-8.097115603596,2.243969803068)); +#1602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1603 = ORIENTED_EDGE('',*,*,#1604,.F.); +#1604 = EDGE_CURVE('',#469,#1531,#1605,.T.); +#1605 = SURFACE_CURVE('',#1606,(#1617,#1646),.PCURVE_S1.); +#1606 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1607,#1608,#1609,#1610,#1611, + #1612,#1613,#1614,#1615,#1616),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,4),( + 0.832917147841,0.857902923832,0.925283753531,0.989118741768, + 1.052953730005),.UNSPECIFIED.); +#1607 = CARTESIAN_POINT('',(-5.62036205939,39.237690372731, + -31.69233620747)); +#1608 = CARTESIAN_POINT('',(-5.5389206981,39.258059343534, + -31.71872796121)); +#1609 = CARTESIAN_POINT('',(-5.458192034721,39.284705097636, + -31.7446228666)); +#1610 = CARTESIAN_POINT('',(-5.168215806853,39.405363620309, + -31.83675524546)); +#1611 = CARTESIAN_POINT('',(-4.973783079406,39.539051033492, + -31.8966818221)); +#1612 = CARTESIAN_POINT('',(-4.674020950072,39.844326665944, + -31.98754446209)); +#1613 = CARTESIAN_POINT('',(-4.545907951056,40.032870584296, + -32.02550016163)); +#1614 = CARTESIAN_POINT('',(-4.375287958381,40.447754955732, + -32.07563443304)); +#1615 = CARTESIAN_POINT('',(-4.332837108069,40.674108198611, + -32.08789818114)); +#1616 = CARTESIAN_POINT('',(-4.332837108069,40.886891492734, + -32.08789818114)); +#1617 = PCURVE('',#485,#1618); +#1618 = DEFINITIONAL_REPRESENTATION('',(#1619),#1645); +#1619 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1620,#1621,#1622,#1623,#1624, + #1625,#1626,#1627,#1628,#1629,#1630,#1631,#1632,#1633,#1634,#1635, + #1636,#1637,#1638,#1639,#1640,#1641,#1642,#1643,#1644), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (0.832917147841,0.842918810667,0.852920473493,0.862922136318, + 0.872923799144,0.882925461969,0.892927124795,0.902928787621, + 0.912930450446,0.922932113272,0.932933776097,0.942935438923, + 0.952937101749,0.962938764574,0.9729404274,0.982942090225, + 0.992943753051,1.002945415877,1.012947078702,1.022948741528, + 1.032950404353,1.042952067179,1.052953730005),.UNSPECIFIED.); +#1620 = CARTESIAN_POINT('',(-1.884176306469,-7.300799187402)); +#1621 = CARTESIAN_POINT('',(-1.883397466114,-7.308955838584)); +#1622 = CARTESIAN_POINT('',(-1.88184580208,-7.327270114629)); +#1623 = CARTESIAN_POINT('',(-1.879550837541,-7.360675040451)); +#1624 = CARTESIAN_POINT('',(-1.877302937959,-7.399895600599)); +#1625 = CARTESIAN_POINT('',(-1.875116454904,-7.444983556149)); +#1626 = CARTESIAN_POINT('',(-1.873001604035,-7.495428182807)); +#1627 = CARTESIAN_POINT('',(-1.870969211767,-7.550806878793)); +#1628 = CARTESIAN_POINT('',(-1.869030237375,-7.610660798201)); +#1629 = CARTESIAN_POINT('',(-1.867194512751,-7.674587949118)); +#1630 = CARTESIAN_POINT('',(-1.865476258499,-7.741995167783)); +#1631 = CARTESIAN_POINT('',(-1.863873277602,-7.812997123834)); +#1632 = CARTESIAN_POINT('',(-1.862331521144,-7.890043027357)); +#1633 = CARTESIAN_POINT('',(-1.860879812248,-7.971984967711)); +#1634 = CARTESIAN_POINT('',(-1.85952765204,-8.058511783482)); +#1635 = CARTESIAN_POINT('',(-1.858289815194,-8.149089892054)); +#1636 = CARTESIAN_POINT('',(-1.857179311263,-8.243238646394)); +#1637 = CARTESIAN_POINT('',(-1.85621094238,-8.340488078337)); +#1638 = CARTESIAN_POINT('',(-1.855393377134,-8.440258746196)); +#1639 = CARTESIAN_POINT('',(-1.854724837944,-8.54177258058)); +#1640 = CARTESIAN_POINT('',(-1.854205439198,-8.644287628657)); +#1641 = CARTESIAN_POINT('',(-1.853834788627,-8.747052259957)); +#1642 = CARTESIAN_POINT('',(-1.85361263013,-8.849317438012)); +#1643 = CARTESIAN_POINT('',(-1.85356332424,-8.916661431319)); +#1644 = CARTESIAN_POINT('',(-1.853563324232,-8.950000307404)); +#1645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1646 = PCURVE('',#604,#1647); +#1647 = DEFINITIONAL_REPRESENTATION('',(#1648),#1674); +#1648 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1649,#1650,#1651,#1652,#1653, + #1654,#1655,#1656,#1657,#1658,#1659,#1660,#1661,#1662,#1663,#1664, + #1665,#1666,#1667,#1668,#1669,#1670,#1671,#1672,#1673), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (0.832917147841,0.842918810667,0.852920473493,0.862922136318, + 0.872923799144,0.882925461969,0.892927124795,0.902928787621, + 0.912930450446,0.922932113272,0.932933776097,0.942935438923, + 0.952937101749,0.962938764574,0.9729404274,0.982942090225, + 0.992943753051,1.002945415877,1.012947078702,1.022948741528, + 1.032950404353,1.042952067179,1.052953730005),.UNSPECIFIED.); +#1649 = CARTESIAN_POINT('',(-4.467310581656,2.242930239586)); +#1650 = CARTESIAN_POINT('',(-4.447542181517,2.232366008432)); +#1651 = CARTESIAN_POINT('',(-4.407852064678,2.211396081855)); +#1652 = CARTESIAN_POINT('',(-4.347992231529,2.180601799485)); +#1653 = CARTESIAN_POINT('',(-4.287963368335,2.150653835789)); +#1654 = CARTESIAN_POINT('',(-4.227849926745,2.12173541386)); +#1655 = CARTESIAN_POINT('',(-4.167784109189,2.093954277194)); +#1656 = CARTESIAN_POINT('',(-4.107919584206,2.06742965368)); +#1657 = CARTESIAN_POINT('',(-4.048436479064,2.042281443107)); +#1658 = CARTESIAN_POINT('',(-3.989479449054,2.01861537327)); +#1659 = CARTESIAN_POINT('',(-3.93134692899,1.996593188036)); +#1660 = CARTESIAN_POINT('',(-3.873743305718,1.976166738981)); +#1661 = CARTESIAN_POINT('',(-3.814481988441,1.95662428571)); +#1662 = CARTESIAN_POINT('',(-3.754334757179,1.938313755638)); +#1663 = CARTESIAN_POINT('',(-3.693387653165,1.921335949733)); +#1664 = CARTESIAN_POINT('',(-3.631900375661,1.905859237779)); +#1665 = CARTESIAN_POINT('',(-3.570062256719,1.892028840752)); +#1666 = CARTESIAN_POINT('',(-3.50804187297,1.880015006043)); +#1667 = CARTESIAN_POINT('',(-3.445967949248,1.869896250819)); +#1668 = CARTESIAN_POINT('',(-3.384003811411,1.861642357206)); +#1669 = CARTESIAN_POINT('',(-3.322345515916,1.855245631546)); +#1670 = CARTESIAN_POINT('',(-3.261208700592,1.850692344687)); +#1671 = CARTESIAN_POINT('',(-3.200818841279,1.847970385236)); +#1672 = CARTESIAN_POINT('',(-3.161202861448,1.847368265913)); +#1673 = CARTESIAN_POINT('',(-3.14159265359,1.847368265913)); +#1674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1675 = ORIENTED_EDGE('',*,*,#468,.F.); +#1676 = ADVANCED_FACE('',(#1677),#604,.F.); +#1677 = FACE_BOUND('',#1678,.T.); +#1678 = EDGE_LOOP('',(#1679,#1702,#1703,#1886,#2010,#2011,#2012,#2013)); +#1679 = ORIENTED_EDGE('',*,*,#1680,.T.); +#1680 = EDGE_CURVE('',#1681,#1531,#1683,.T.); +#1681 = VERTEX_POINT('',#1682); +#1682 = CARTESIAN_POINT('',(-4.332837108069,40.886891492734, + -36.73526644706)); +#1683 = SEAM_CURVE('',#1684,(#1688,#1695),.PCURVE_S1.); +#1684 = LINE('',#1685,#1686); +#1685 = CARTESIAN_POINT('',(-4.332837108069,40.886891492734, + -33.93526644706)); +#1686 = VECTOR('',#1687,1.); +#1687 = DIRECTION('',(-6.626431603857E-29,-2.442490654279E-15,1.)); +#1688 = PCURVE('',#604,#1689); +#1689 = DEFINITIONAL_REPRESENTATION('',(#1690),#1694); +#1690 = LINE('',#1691,#1692); +#1691 = CARTESIAN_POINT('',(-9.42477796077,0.)); +#1692 = VECTOR('',#1693,1.); +#1693 = DIRECTION('',(-0.,1.)); +#1694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1695 = PCURVE('',#604,#1696); +#1696 = DEFINITIONAL_REPRESENTATION('',(#1697),#1701); +#1697 = LINE('',#1698,#1699); +#1698 = CARTESIAN_POINT('',(-3.141592653589,0.)); +#1699 = VECTOR('',#1700,1.); +#1700 = DIRECTION('',(-0.,1.)); +#1701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1702 = ORIENTED_EDGE('',*,*,#1530,.T.); +#1703 = ORIENTED_EDGE('',*,*,#1704,.F.); +#1704 = EDGE_CURVE('',#1705,#1507,#1707,.T.); +#1705 = VERTEX_POINT('',#1706); +#1706 = CARTESIAN_POINT('',(-6.442104624362,42.53689152307, + -31.41707228534)); +#1707 = SURFACE_CURVE('',#1708,(#1740,#1813),.PCURVE_S1.); +#1708 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1709,#1710,#1711,#1712,#1713, + #1714,#1715,#1716,#1717,#1718,#1719,#1720,#1721,#1722,#1723,#1724, + #1725,#1726,#1727,#1728,#1729,#1730,#1731,#1732,#1733,#1734,#1735, + #1736,#1737,#1738,#1739),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,3,2,2,2,2,2, + 2,2,2,2,4),(0.251787711188,0.268630151095,0.28969360768, + 0.302304017722,0.318467956146,0.329268963632,0.333964180402, + 0.337325070639,0.340723489567,0.345597017904,0.355108938087, + 0.363949441714,0.374241770221,0.388001809493,0.407824129623), + .UNSPECIFIED.); +#1709 = CARTESIAN_POINT('',(-6.442104624353,42.536891523071, + -31.41707228534)); +#1710 = CARTESIAN_POINT('',(-6.442104620631,42.536891523994, + -31.47079657928)); +#1711 = CARTESIAN_POINT('',(-6.436341645073,42.538352417083, + -31.52632757355)); +#1712 = CARTESIAN_POINT('',(-6.410513503446,42.544473494581, + -31.65141039342)); +#1713 = CARTESIAN_POINT('',(-6.387515548882,42.549774487727, + -31.71955715021)); +#1714 = CARTESIAN_POINT('',(-6.338470102184,42.559296506439, + -31.82099224256)); +#1715 = CARTESIAN_POINT('',(-6.317189788415,42.5631186449,-31.8576215406 + )); +#1716 = CARTESIAN_POINT('',(-6.26223733564,42.571632223584, + -31.93605694209)); +#1717 = CARTESIAN_POINT('',(-6.226262574906,42.576347024831, + -31.9771220279)); +#1718 = CARTESIAN_POINT('',(-6.185520611433,42.580021064798, + -32.01218805312)); +#1719 = CARTESIAN_POINT('',(-6.158296166441,42.582476118273, + -32.03561974352)); +#1720 = CARTESIAN_POINT('',(-6.12874430179,42.584476538877, + -32.05652849135)); +#1721 = CARTESIAN_POINT('',(-6.083562522291,42.586189762304, + -32.08091665745)); +#1722 = CARTESIAN_POINT('',(-6.069499632509,42.586556925638, + -32.08756951019)); +#1723 = CARTESIAN_POINT('',(-6.04483195615,42.58688032987, + -32.09748941696)); +#1724 = CARTESIAN_POINT('',(-6.034385788685,42.586923670386, + -32.10117905947)); +#1725 = CARTESIAN_POINT('',(-6.01312058769,42.58681077702, + -32.10759667861)); +#1726 = CARTESIAN_POINT('',(-6.002305308554,42.586652305848, + -32.1103114359)); +#1727 = CARTESIAN_POINT('',(-5.975759361445,42.586005050658, + -32.11555123162)); +#1728 = CARTESIAN_POINT('',(-5.959965368386,42.585403003357, + -32.11747598578)); +#1729 = CARTESIAN_POINT('',(-5.913204832834,42.582959506864, + -32.11933166557)); +#1730 = CARTESIAN_POINT('',(-5.882721491026,42.580506921937, + -32.11559789577)); +#1731 = CARTESIAN_POINT('',(-5.826197466462,42.574508088968, + -32.09802868005)); +#1732 = CARTESIAN_POINT('',(-5.800959044636,42.571163599975, + -32.08522444621)); +#1733 = CARTESIAN_POINT('',(-5.751236856143,42.563624381377, + -32.04933766327)); +#1734 = CARTESIAN_POINT('',(-5.728362755985,42.559517837693, + -32.02550826333)); +#1735 = CARTESIAN_POINT('',(-5.683434512231,42.550803544508, + -31.96304385845)); +#1736 = CARTESIAN_POINT('',(-5.664498466362,42.54656486794, + -31.92252346495)); +#1737 = CARTESIAN_POINT('',(-5.631797183206,42.539029301741, + -31.81991495033)); +#1738 = CARTESIAN_POINT('',(-5.623569595984,42.536891524113, + -31.7551397497)); +#1739 = CARTESIAN_POINT('',(-5.623569591784,42.536891523071, + -31.69129664399)); +#1740 = PCURVE('',#604,#1741); +#1741 = DEFINITIONAL_REPRESENTATION('',(#1742),#1812); +#1742 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1743,#1744,#1745,#1746,#1747, + #1748,#1749,#1750,#1751,#1752,#1753,#1754,#1755,#1756,#1757,#1758, + #1759,#1760,#1761,#1762,#1763,#1764,#1765,#1766,#1767,#1768,#1769, + #1770,#1771,#1772,#1773,#1774,#1775,#1776,#1777,#1778,#1779,#1780, + #1781,#1782,#1783,#1784,#1785,#1786,#1787,#1788,#1789,#1790,#1791, + #1792,#1793,#1794,#1795,#1796,#1797,#1798,#1799,#1800,#1801,#1802, + #1803,#1804,#1805,#1806,#1807,#1808,#1809,#1810,#1811), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,4),(0.251787711188,0.254151899346,0.256516087504, + 0.258880275662,0.26124446382,0.263608651978,0.265972840136, + 0.268337028294,0.270701216453,0.273065404611,0.275429592769, + 0.277793780927,0.280157969085,0.282522157243,0.284886345401, + 0.287250533559,0.289614721717,0.291978909876,0.294343098034, + 0.296707286192,0.29907147435,0.301435662508,0.303799850666, + 0.306164038824,0.308528226982,0.31089241514,0.313256603298, + 0.315620791457,0.317984979615,0.320349167773,0.322713355931, + 0.325077544089,0.327441732247,0.329805920405,0.332170108563, + 0.334534296721,0.33689848488,0.339262673038,0.341626861196, + 0.343991049354,0.346355237512,0.34871942567,0.351083613828, + 0.353447801986,0.355811990144,0.358176178303,0.360540366461, + 0.362904554619,0.365268742777,0.367632930935,0.369997119093, + 0.372361307251,0.374725495409,0.377089683567,0.379453871725, + 0.381818059884,0.384182248042,0.3865464362,0.388910624358, + 0.391274812516,0.393639000674,0.396003188832,0.39836737699, + 0.400731565148,0.403095753307,0.405459941465,0.407824129623), + .UNSPECIFIED.); +#1743 = CARTESIAN_POINT('',(-7.610847664359,2.518194161713)); +#1744 = CARTESIAN_POINT('',(-7.610847664834,2.510652835147)); +#1745 = CARTESIAN_POINT('',(-7.61098548165,2.495498981459)); +#1746 = CARTESIAN_POINT('',(-7.611604704621,2.472583836109)); +#1747 = CARTESIAN_POINT('',(-7.612635482645,2.4495134849)); +#1748 = CARTESIAN_POINT('',(-7.614076847965,2.426317359405)); +#1749 = CARTESIAN_POINT('',(-7.615927956058,2.403023878629)); +#1750 = CARTESIAN_POINT('',(-7.618187537745,2.379665239235)); +#1751 = CARTESIAN_POINT('',(-7.620855943189,2.356259539819)); +#1752 = CARTESIAN_POINT('',(-7.623927502408,2.332877493593)); +#1753 = CARTESIAN_POINT('',(-7.627385049672,2.309641891365)); +#1754 = CARTESIAN_POINT('',(-7.631225325437,2.286557089)); +#1755 = CARTESIAN_POINT('',(-7.63544156212,2.263657822828)); +#1756 = CARTESIAN_POINT('',(-7.640027970507,2.240970752013)); +#1757 = CARTESIAN_POINT('',(-7.644978626995,2.218524463914)); +#1758 = CARTESIAN_POINT('',(-7.650287450937,2.196347910272)); +#1759 = CARTESIAN_POINT('',(-7.655949414999,2.174466657115)); +#1760 = CARTESIAN_POINT('',(-7.661955728394,2.152919448936)); +#1761 = CARTESIAN_POINT('',(-7.668311891488,2.131695702074)); +#1762 = CARTESIAN_POINT('',(-7.675028202477,2.110782137703)); +#1763 = CARTESIAN_POINT('',(-7.682097196784,2.09022733817)); +#1764 = CARTESIAN_POINT('',(-7.689516348504,2.070063065464)); +#1765 = CARTESIAN_POINT('',(-7.697281709826,2.050326732441)); +#1766 = CARTESIAN_POINT('',(-7.705390730971,2.031049968854)); +#1767 = CARTESIAN_POINT('',(-7.713882941853,2.012177906515)); +#1768 = CARTESIAN_POINT('',(-7.72274598951,1.993786610434)); +#1769 = CARTESIAN_POINT('',(-7.731977535796,1.975927123423)); +#1770 = CARTESIAN_POINT('',(-7.741572589646,1.958657500999)); +#1771 = CARTESIAN_POINT('',(-7.751527884119,1.94203277005)); +#1772 = CARTESIAN_POINT('',(-7.761837060588,1.926113059282)); +#1773 = CARTESIAN_POINT('',(-7.772505575548,1.910941118754)); +#1774 = CARTESIAN_POINT('',(-7.783554398054,1.896554649412)); +#1775 = CARTESIAN_POINT('',(-7.79496128979,1.8830526334)); +#1776 = CARTESIAN_POINT('',(-7.806714958935,1.870519225737)); +#1777 = CARTESIAN_POINT('',(-7.818800825928,1.859042476554)); +#1778 = CARTESIAN_POINT('',(-7.831208987093,1.848709326793)); +#1779 = CARTESIAN_POINT('',(-7.843916552671,1.839622410525)); +#1780 = CARTESIAN_POINT('',(-7.856888233366,1.831891515963)); +#1781 = CARTESIAN_POINT('',(-7.870084715165,1.825624263254)); +#1782 = CARTESIAN_POINT('',(-7.883467452498,1.820926886162)); +#1783 = CARTESIAN_POINT('',(-7.896961768339,1.817905845295)); +#1784 = CARTESIAN_POINT('',(-7.910555492262,1.81665406981)); +#1785 = CARTESIAN_POINT('',(-7.924058369728,1.817256707642)); +#1786 = CARTESIAN_POINT('',(-7.93742569598,1.819749100407)); +#1787 = CARTESIAN_POINT('',(-7.950606819278,1.824161087315)); +#1788 = CARTESIAN_POINT('',(-7.963614861925,1.83056540171)); +#1789 = CARTESIAN_POINT('',(-7.976148452852,1.838831903595)); +#1790 = CARTESIAN_POINT('',(-7.988165843682,1.848873201493)); +#1791 = CARTESIAN_POINT('',(-7.999652099185,1.860626272434)); +#1792 = CARTESIAN_POINT('',(-8.010592642038,1.874042673958)); +#1793 = CARTESIAN_POINT('',(-8.020804857905,1.888805776651)); +#1794 = CARTESIAN_POINT('',(-8.030323272096,1.904823290531)); +#1795 = CARTESIAN_POINT('',(-8.039146544169,1.921966294526)); +#1796 = CARTESIAN_POINT('',(-8.047288982392,1.940133961614)); +#1797 = CARTESIAN_POINT('',(-8.054732695078,1.959141029364)); +#1798 = CARTESIAN_POINT('',(-8.061493147139,1.978872750011)); +#1799 = CARTESIAN_POINT('',(-8.067592201553,1.999234338191)); +#1800 = CARTESIAN_POINT('',(-8.073049510896,2.020123891109)); +#1801 = CARTESIAN_POINT('',(-8.077886327079,2.041448013293)); +#1802 = CARTESIAN_POINT('',(-8.0821188164,2.063086397412)); +#1803 = CARTESIAN_POINT('',(-8.085790254479,2.085060275855)); +#1804 = CARTESIAN_POINT('',(-8.088917083909,2.107321961764)); +#1805 = CARTESIAN_POINT('',(-8.09151628496,2.129817868516)); +#1806 = CARTESIAN_POINT('',(-8.093604681532,2.152495990324)); +#1807 = CARTESIAN_POINT('',(-8.095199117313,2.175303897819)); +#1808 = CARTESIAN_POINT('',(-8.096316405839,2.198189275133)); +#1809 = CARTESIAN_POINT('',(-8.096973347281,2.221099775972)); +#1810 = CARTESIAN_POINT('',(-8.097115603163,2.236355300149)); +#1811 = CARTESIAN_POINT('',(-8.09711560359,2.243969803068)); +#1812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1813 = PCURVE('',#1367,#1814); +#1814 = DEFINITIONAL_REPRESENTATION('',(#1815),#1885); +#1815 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1816,#1817,#1818,#1819,#1820, + #1821,#1822,#1823,#1824,#1825,#1826,#1827,#1828,#1829,#1830,#1831, + #1832,#1833,#1834,#1835,#1836,#1837,#1838,#1839,#1840,#1841,#1842, + #1843,#1844,#1845,#1846,#1847,#1848,#1849,#1850,#1851,#1852,#1853, + #1854,#1855,#1856,#1857,#1858,#1859,#1860,#1861,#1862,#1863,#1864, + #1865,#1866,#1867,#1868,#1869,#1870,#1871,#1872,#1873,#1874,#1875, + #1876,#1877,#1878,#1879,#1880,#1881,#1882,#1883,#1884), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,4),(0.251787711188,0.254151899346,0.256516087504, + 0.258880275662,0.26124446382,0.263608651978,0.265972840136, + 0.268337028294,0.270701216453,0.273065404611,0.275429592769, + 0.277793780927,0.280157969085,0.282522157243,0.284886345401, + 0.287250533559,0.289614721717,0.291978909876,0.294343098034, + 0.296707286192,0.29907147435,0.301435662508,0.303799850666, + 0.306164038824,0.308528226982,0.31089241514,0.313256603298, + 0.315620791457,0.317984979615,0.320349167773,0.322713355931, + 0.325077544089,0.327441732247,0.329805920405,0.332170108563, + 0.334534296721,0.33689848488,0.339262673038,0.341626861196, + 0.343991049354,0.346355237512,0.34871942567,0.351083613828, + 0.353447801986,0.355811990144,0.358176178303,0.360540366461, + 0.362904554619,0.365268742777,0.367632930935,0.369997119093, + 0.372361307251,0.374725495409,0.377089683567,0.379453871725, + 0.381818059884,0.384182248042,0.3865464362,0.388910624358, + 0.391274812516,0.393639000674,0.396003188832,0.39836737699, + 0.400731565148,0.403095753307,0.405459941465,0.407824129623), + .UNSPECIFIED.); +#1816 = CARTESIAN_POINT('',(0.452321941926,1.57079630861)); +#1817 = CARTESIAN_POINT('',(0.452377979521,1.568156731415)); +#1818 = CARTESIAN_POINT('',(0.452495406845,1.562879996908)); +#1819 = CARTESIAN_POINT('',(0.452687347601,1.554981662947)); +#1820 = CARTESIAN_POINT('',(0.452894831942,1.547109572855)); +#1821 = CARTESIAN_POINT('',(0.453117602102,1.539273314978)); +#1822 = CARTESIAN_POINT('',(0.453355413048,1.531482154292)); +#1823 = CARTESIAN_POINT('',(0.453607977767,1.523746597528)); +#1824 = CARTESIAN_POINT('',(0.453875172304,1.516072535938)); +#1825 = CARTESIAN_POINT('',(0.454156270794,1.508483077976)); +#1826 = CARTESIAN_POINT('',(0.454449786458,1.501017625569)); +#1827 = CARTESIAN_POINT('',(0.454755602033,1.493676911856)); +#1828 = CARTESIAN_POINT('',(0.455073251622,1.486471661867)); +#1829 = CARTESIAN_POINT('',(0.455402364112,1.479410008368)); +#1830 = CARTESIAN_POINT('',(0.455742549687,1.47250077063)); +#1831 = CARTESIAN_POINT('',(0.45609341051,1.465752898599)); +#1832 = CARTESIAN_POINT('',(0.456454611613,1.459174394878)); +#1833 = CARTESIAN_POINT('',(0.456825586745,1.452777162609)); +#1834 = CARTESIAN_POINT('',(0.45720664417,1.446558674716)); +#1835 = CARTESIAN_POINT('',(0.457598295587,1.440516634882)); +#1836 = CARTESIAN_POINT('',(0.457999960792,1.434666937584)); +#1837 = CARTESIAN_POINT('',(0.45841135842,1.429020584516)); +#1838 = CARTESIAN_POINT('',(0.458832113693,1.423590306871)); +#1839 = CARTESIAN_POINT('',(0.459261940933,1.418387070028)); +#1840 = CARTESIAN_POINT('',(0.459702691095,1.413399700796)); +#1841 = CARTESIAN_POINT('',(0.460153414092,1.408653140906)); +#1842 = CARTESIAN_POINT('',(0.460613694978,1.404165463762)); +#1843 = CARTESIAN_POINT('',(0.461082970271,1.399956708596)); +#1844 = CARTESIAN_POINT('',(0.461560756955,1.39604619027)); +#1845 = CARTESIAN_POINT('',(0.462046420257,1.392454406496)); +#1846 = CARTESIAN_POINT('',(0.462539873573,1.389198084191)); +#1847 = CARTESIAN_POINT('',(0.463041626859,1.386295338517)); +#1848 = CARTESIAN_POINT('',(0.463550184172,1.383777252723)); +#1849 = CARTESIAN_POINT('',(0.464064547209,1.381671861004)); +#1850 = CARTESIAN_POINT('',(0.464583565649,1.380007934251)); +#1851 = CARTESIAN_POINT('',(0.465106259252,1.378814660364)); +#1852 = CARTESIAN_POINT('',(0.465631059859,1.378124052438)); +#1853 = CARTESIAN_POINT('',(0.466155893479,1.377968144316)); +#1854 = CARTESIAN_POINT('',(0.466678549183,1.378377209645)); +#1855 = CARTESIAN_POINT('',(0.467196848877,1.379381015786)); +#1856 = CARTESIAN_POINT('',(0.467707299173,1.381002048717)); +#1857 = CARTESIAN_POINT('',(0.468208767689,1.383270180477)); +#1858 = CARTESIAN_POINT('',(0.468693718198,1.386177133179)); +#1859 = CARTESIAN_POINT('',(0.469160257778,1.389725312869)); +#1860 = CARTESIAN_POINT('',(0.469606321591,1.393914199889)); +#1861 = CARTESIAN_POINT('',(0.470031844119,1.39877132304)); +#1862 = CARTESIAN_POINT('',(0.470426832225,1.404189533837)); +#1863 = CARTESIAN_POINT('',(0.470790409111,1.41012867977)); +#1864 = CARTESIAN_POINT('',(0.471122499506,1.416562801678)); +#1865 = CARTESIAN_POINT('',(0.471422946464,1.423471242183)); +#1866 = CARTESIAN_POINT('',(0.471687436288,1.430705552189)); +#1867 = CARTESIAN_POINT('',(0.471917897072,1.438240100485)); +#1868 = CARTESIAN_POINT('',(0.472115233954,1.446029197751)); +#1869 = CARTESIAN_POINT('',(0.472280726572,1.454040283309)); +#1870 = CARTESIAN_POINT('',(0.472415107885,1.462204821183)); +#1871 = CARTESIAN_POINT('',(0.472519754731,1.470486121187)); +#1872 = CARTESIAN_POINT('',(0.472596139913,1.478855715499)); +#1873 = CARTESIAN_POINT('',(0.472645713262,1.487282194876)); +#1874 = CARTESIAN_POINT('',(0.4726699282,1.495737477841)); +#1875 = CARTESIAN_POINT('',(0.472670257948,1.504183065045)); +#1876 = CARTESIAN_POINT('',(0.472648140773,1.512635659196)); +#1877 = CARTESIAN_POINT('',(0.472604476081,1.521082354528)); +#1878 = CARTESIAN_POINT('',(0.472540235699,1.529508202602)); +#1879 = CARTESIAN_POINT('',(0.472456374924,1.537898727813)); +#1880 = CARTESIAN_POINT('',(0.472353856565,1.546239271047)); +#1881 = CARTESIAN_POINT('',(0.472233644805,1.55451518323)); +#1882 = CARTESIAN_POINT('',(0.47209670668,1.562711789596)); +#1883 = CARTESIAN_POINT('',(0.471994911001,1.568113541927)); +#1884 = CARTESIAN_POINT('',(0.471941548904,1.570796309642)); +#1885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1886 = ORIENTED_EDGE('',*,*,#1887,.T.); +#1887 = EDGE_CURVE('',#1705,#498,#1888,.T.); +#1888 = SURFACE_CURVE('',#1889,(#1908,#1959),.PCURVE_S1.); +#1889 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1890,#1891,#1892,#1893,#1894, + #1895,#1896,#1897,#1898,#1899,#1900,#1901,#1902,#1903,#1904,#1905, + #1906,#1907),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),( + 0.304611973409,0.329500345582,0.396566666392,0.461523842374, + 0.526481018356,0.590397324879,0.654313631402,0.722417862767, + 0.747980656087),.UNSPECIFIED.); +#1890 = CARTESIAN_POINT('',(-6.442104624362,42.536891523069, + -31.41707228534)); +#1891 = CARTESIAN_POINT('',(-6.522840150402,42.516865809365, + -31.38914056788)); +#1892 = CARTESIAN_POINT('',(-6.602791393148,42.490701728772, + -31.36121372143)); +#1893 = CARTESIAN_POINT('',(-6.889725723699,42.372479488219, + -31.26009720131)); +#1894 = CARTESIAN_POINT('',(-7.08192400175,42.241967655086, + -31.19049650233)); +#1895 = CARTESIAN_POINT('',(-7.383101796675,41.940789860161, + -31.07980412794)); +#1896 = CARTESIAN_POINT('',(-7.513973851751,41.751588458838, + -31.03073777316)); +#1897 = CARTESIAN_POINT('',(-7.688890533516,41.332933952568, + -30.96467960892)); +#1898 = CARTESIAN_POINT('',(-7.732837108069,41.103415412673, + -30.94784301388)); +#1899 = CARTESIAN_POINT('',(-7.732837108069,40.673837137657, + -30.94784301388)); +#1900 = CARTESIAN_POINT('',(-7.690273381926,40.447717420988, + -30.96414795214)); +#1901 = CARTESIAN_POINT('',(-7.520399311886,40.034173705452, + -31.02832015981)); +#1902 = CARTESIAN_POINT('',(-7.393186969217,39.846686428153, + -31.07603893119)); +#1903 = CARTESIAN_POINT('',(-7.095385337179,39.541777367216, + -31.18560581338)); +#1904 = CARTESIAN_POINT('',(-6.901388664595,39.407582436869, + -31.25593369185)); +#1905 = CARTESIAN_POINT('',(-6.610065757016,39.285567971608, + -31.35866872862)); +#1906 = CARTESIAN_POINT('',(-6.528114355934,39.258399697219, + -31.38730858353)); +#1907 = CARTESIAN_POINT('',(-6.445312156747,39.237690372731, + -31.41596245085)); +#1908 = PCURVE('',#604,#1909); +#1909 = DEFINITIONAL_REPRESENTATION('',(#1910),#1958); +#1910 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1911,#1912,#1913,#1914,#1915, + #1916,#1917,#1918,#1919,#1920,#1921,#1922,#1923,#1924,#1925,#1926, + #1927,#1928,#1929,#1930,#1931,#1932,#1933,#1934,#1935,#1936,#1937, + #1938,#1939,#1940,#1941,#1942,#1943,#1944,#1945,#1946,#1947,#1948, + #1949,#1950,#1951,#1952,#1953,#1954,#1955,#1956,#1957), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.304611973409, + 0.314688534379,0.324765095349,0.334841656319,0.344918217289, + 0.354994778259,0.365071339229,0.375147900198,0.385224461168, + 0.395301022138,0.405377583108,0.415454144078,0.425530705048, + 0.435607266018,0.445683826988,0.455760387958,0.465836948928, + 0.475913509898,0.485990070868,0.496066631838,0.506143192808, + 0.516219753778,0.526296314748,0.536372875718,0.546449436688, + 0.556525997658,0.566602558628,0.576679119598,0.586755680568, + 0.596832241538,0.606908802508,0.616985363478,0.627061924447, + 0.637138485417,0.647215046387,0.657291607357,0.667368168327, + 0.677444729297,0.687521290267,0.697597851237,0.707674412207, + 0.717750973177,0.727827534147,0.737904095117,0.747980656087), + .UNSPECIFIED.); +#1911 = CARTESIAN_POINT('',(-7.610847664354,2.518194161713)); +#1912 = CARTESIAN_POINT('',(-7.59103623563,2.529502781885)); +#1913 = CARTESIAN_POINT('',(-7.551278345635,2.552118686089)); +#1914 = CARTESIAN_POINT('',(-7.491369915277,2.585817449325)); +#1915 = CARTESIAN_POINT('',(-7.431342605669,2.619068546353)); +#1916 = CARTESIAN_POINT('',(-7.371281884485,2.651654613737)); +#1917 = CARTESIAN_POINT('',(-7.311317691231,2.683392322388)); +#1918 = CARTESIAN_POINT('',(-7.251598111846,2.714094712611)); +#1919 = CARTESIAN_POINT('',(-7.192308430784,2.743566844616)); +#1920 = CARTESIAN_POINT('',(-7.133558007778,2.771649329604)); +#1921 = CARTESIAN_POINT('',(-7.075761328415,2.798048554907)); +#1922 = CARTESIAN_POINT('',(-7.018175440008,2.822972252334)); +#1923 = CARTESIAN_POINT('',(-6.958940486592,2.84709003344)); +#1924 = CARTESIAN_POINT('',(-6.898809480303,2.869933295246)); +#1925 = CARTESIAN_POINT('',(-6.837866361336,2.891325678164)); +#1926 = CARTESIAN_POINT('',(-6.776362037176,2.91101112472)); +#1927 = CARTESIAN_POINT('',(-6.714477121576,2.928760125589)); +#1928 = CARTESIAN_POINT('',(-6.65236935976,2.944316676741)); +#1929 = CARTESIAN_POINT('',(-6.590157911741,2.957509447409)); +#1930 = CARTESIAN_POINT('',(-6.528008369206,2.968348933664)); +#1931 = CARTESIAN_POINT('',(-6.466107068894,2.976814027823)); +#1932 = CARTESIAN_POINT('',(-6.40469192671,2.982892104639)); +#1933 = CARTESIAN_POINT('',(-6.34388621964,2.986568212881)); +#1934 = CARTESIAN_POINT('',(-6.284264354122,2.987828222809)); +#1935 = CARTESIAN_POINT('',(-6.224688269109,2.986657044713)); +#1936 = CARTESIAN_POINT('',(-6.163851607739,2.983066353349)); +#1937 = CARTESIAN_POINT('',(-6.102386279186,2.977068518052)); +#1938 = CARTESIAN_POINT('',(-6.040413074114,2.968676269504)); +#1939 = CARTESIAN_POINT('',(-5.978182824015,2.957900199123)); +#1940 = CARTESIAN_POINT('',(-5.915889785794,2.944759094036)); +#1941 = CARTESIAN_POINT('',(-5.853706194913,2.929241097794)); +#1942 = CARTESIAN_POINT('',(-5.791759521087,2.911535718312)); +#1943 = CARTESIAN_POINT('',(-5.730220461581,2.891899906598)); +#1944 = CARTESIAN_POINT('',(-5.669281279179,2.870567914199)); +#1945 = CARTESIAN_POINT('',(-5.609204513028,2.847799525727)); +#1946 = CARTESIAN_POINT('',(-5.550083269848,2.823775093001)); +#1947 = CARTESIAN_POINT('',(-5.492683566552,2.798967165945)); +#1948 = CARTESIAN_POINT('',(-5.434628584287,2.772490382391)); +#1949 = CARTESIAN_POINT('',(-5.375812160104,2.744413485784)); +#1950 = CARTESIAN_POINT('',(-5.316468768611,2.714950577308)); +#1951 = CARTESIAN_POINT('',(-5.256745463565,2.684276911243)); +#1952 = CARTESIAN_POINT('',(-5.196805810254,2.652577771745)); +#1953 = CARTESIAN_POINT('',(-5.136792177229,2.62003717038)); +#1954 = CARTESIAN_POINT('',(-5.076822101959,2.586834179188)); +#1955 = CARTESIAN_POINT('',(-5.016976093326,2.55318471178)); +#1956 = CARTESIAN_POINT('',(-4.977259318201,2.530598935593)); +#1957 = CARTESIAN_POINT('',(-4.957467379113,2.519303996211)); +#1958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1959 = PCURVE('',#699,#1960); +#1960 = DEFINITIONAL_REPRESENTATION('',(#1961),#2009); +#1961 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1962,#1963,#1964,#1965,#1966, + #1967,#1968,#1969,#1970,#1971,#1972,#1973,#1974,#1975,#1976,#1977, + #1978,#1979,#1980,#1981,#1982,#1983,#1984,#1985,#1986,#1987,#1988, + #1989,#1990,#1991,#1992,#1993,#1994,#1995,#1996,#1997,#1998,#1999, + #2000,#2001,#2002,#2003,#2004,#2005,#2006,#2007,#2008), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.304611973409, + 0.314688534379,0.324765095349,0.334841656319,0.344918217289, + 0.354994778259,0.365071339229,0.375147900198,0.385224461168, + 0.395301022138,0.405377583108,0.415454144078,0.425530705048, + 0.435607266018,0.445683826988,0.455760387958,0.465836948928, + 0.475913509898,0.485990070868,0.496066631838,0.506143192808, + 0.516219753778,0.526296314748,0.536372875718,0.546449436688, + 0.556525997658,0.566602558628,0.576679119598,0.586755680568, + 0.596832241538,0.606908802508,0.616985363478,0.627061924447, + 0.637138485417,0.647215046387,0.657291607357,0.667368168327, + 0.677444729297,0.687521290267,0.697597851237,0.707674412207, + 0.717750973177,0.727827534147,0.737904095117,0.747980656087), + .UNSPECIFIED.); +#1962 = CARTESIAN_POINT('',(-1.90387254502,-10.60000033774)); +#1963 = CARTESIAN_POINT('',(-1.904658631598,-10.59188933953)); +#1964 = CARTESIAN_POINT('',(-1.906225304278,-10.57366560314)); +#1965 = CARTESIAN_POINT('',(-1.908544226338,-10.54040738254)); +#1966 = CARTESIAN_POINT('',(-1.910817362632,-10.50134919509)); +#1967 = CARTESIAN_POINT('',(-1.913030410808,-10.4564735319)); +#1968 = CARTESIAN_POINT('',(-1.915172803012,-10.40629384677)); +#1969 = CARTESIAN_POINT('',(-1.917233467633,-10.35122995563)); +#1970 = CARTESIAN_POINT('',(-1.919200874481,-10.29175156034)); +#1971 = CARTESIAN_POINT('',(-1.921065816415,-10.2282224568)); +#1972 = CARTESIAN_POINT('',(-1.922810240571,-10.16138017887)); +#1973 = CARTESIAN_POINT('',(-1.924449144119,-10.09057321452)); +#1974 = CARTESIAN_POINT('',(-1.926028055744,-10.01374921073)); +#1975 = CARTESIAN_POINT('',(-1.927517456133,-9.932014814036)); +#1976 = CARTESIAN_POINT('',(-1.928907095096,-9.845667241533)); +#1977 = CARTESIAN_POINT('',(-1.930181457554,-9.755218649218)); +#1978 = CARTESIAN_POINT('',(-1.931326811503,-9.661130866949)); +#1979 = CARTESIAN_POINT('',(-1.93232755173,-9.563852090241)); +#1980 = CARTESIAN_POINT('',(-1.933174613137,-9.463951778415)); +#1981 = CARTESIAN_POINT('',(-1.933869186307,-9.362206428027)); +#1982 = CARTESIAN_POINT('',(-1.934410542877,-9.259339562002)); +#1983 = CARTESIAN_POINT('',(-1.934798469129,-9.156140355215)); +#1984 = CARTESIAN_POINT('',(-1.935032610002,-9.053188348371)); +#1985 = CARTESIAN_POINT('',(-1.935112659253,-8.951835966911)); +#1986 = CARTESIAN_POINT('',(-1.935038255267,-8.850553731492)); +#1987 = CARTESIAN_POINT('',(-1.934809556015,-8.747527579362)); +#1988 = CARTESIAN_POINT('',(-1.934426758819,-8.644208920311)); +#1989 = CARTESIAN_POINT('',(-1.933890084917,-8.541174538139)); +#1990 = CARTESIAN_POINT('',(-1.933199619183,-8.439238103264)); +#1991 = CARTESIAN_POINT('',(-1.932355966172,-8.339140365617)); +#1992 = CARTESIAN_POINT('',(-1.931357786419,-8.241676870467)); +#1993 = CARTESIAN_POINT('',(-1.930215344478,-8.147412931995)); +#1994 = CARTESIAN_POINT('',(-1.92894433761,-8.056816319747)); +#1995 = CARTESIAN_POINT('',(-1.927558793999,-7.970363695184)); +#1996 = CARTESIAN_POINT('',(-1.926074468979,-7.888584267515)); +#1997 = CARTESIAN_POINT('',(-1.924501872507,-7.811788163032)); +#1998 = CARTESIAN_POINT('',(-1.922870761422,-7.741109291958)); +#1999 = CARTESIAN_POINT('',(-1.921121449425,-7.673841273366)); +#2000 = CARTESIAN_POINT('',(-1.919257171179,-7.61010374485)); +#2001 = CARTESIAN_POINT('',(-1.917290725812,-7.550416486681)); +#2002 = CARTESIAN_POINT('',(-1.915232358422,-7.495190811551)); +#2003 = CARTESIAN_POINT('',(-1.913092955749,-7.444871759777)); +#2004 = CARTESIAN_POINT('',(-1.910883379674,-7.399877928769)); +#2005 = CARTESIAN_POINT('',(-1.908613934704,-7.360699959933)); +#2006 = CARTESIAN_POINT('',(-1.906298888705,-7.327295144991)); +#2007 = CARTESIAN_POINT('',(-1.904734645577,-7.308965060892)); +#2008 = CARTESIAN_POINT('',(-1.90394968393,-7.300799187402)); +#2009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2010 = ORIENTED_EDGE('',*,*,#497,.F.); +#2011 = ORIENTED_EDGE('',*,*,#1604,.T.); +#2012 = ORIENTED_EDGE('',*,*,#1680,.F.); +#2013 = ORIENTED_EDGE('',*,*,#2014,.T.); +#2014 = EDGE_CURVE('',#1681,#1681,#2015,.T.); +#2015 = SURFACE_CURVE('',#2016,(#2021,#2028),.PCURVE_S1.); +#2016 = CIRCLE('',#2017,1.7); +#2017 = AXIS2_PLACEMENT_3D('',#2018,#2019,#2020); +#2018 = CARTESIAN_POINT('',(-6.032837108069,40.886891492734, + -36.73526644706)); +#2019 = DIRECTION('',(6.626431603857E-29,2.442490654279E-15,-1.)); +#2020 = DIRECTION('',(-1.,1.803187229162E-14,-2.222163648714E-29)); +#2021 = PCURVE('',#604,#2022); +#2022 = DEFINITIONAL_REPRESENTATION('',(#2023),#2027); +#2023 = LINE('',#2024,#2025); +#2024 = CARTESIAN_POINT('',(-3.996802888651E-15,-2.8)); +#2025 = VECTOR('',#2026,1.); +#2026 = DIRECTION('',(-1.,0.)); +#2027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2028 = PCURVE('',#2029,#2034); +#2029 = PLANE('',#2030); +#2030 = AXIS2_PLACEMENT_3D('',#2031,#2032,#2033); +#2031 = CARTESIAN_POINT('',(-6.032837108069,40.886891492734, + -36.73526644706)); +#2032 = DIRECTION('',(-6.626431603857E-29,-2.442490654279E-15,1.)); +#2033 = DIRECTION('',(1.,-1.803187229162E-14,2.222163648714E-29)); +#2034 = DEFINITIONAL_REPRESENTATION('',(#2035),#2043); +#2035 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2036,#2037,#2038,#2039, +#2040,#2041,#2042),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2036 = CARTESIAN_POINT('',(-1.7,-9.226943705244E-44)); +#2037 = CARTESIAN_POINT('',(-1.7,2.944486372867)); +#2038 = CARTESIAN_POINT('',(0.85,1.472243186434)); +#2039 = CARTESIAN_POINT('',(3.4,4.163799117101E-16)); +#2040 = CARTESIAN_POINT('',(0.85,-1.472243186434)); +#2041 = CARTESIAN_POINT('',(-1.7,-2.944486372867)); +#2042 = CARTESIAN_POINT('',(-1.7,-9.226943705244E-44)); +#2043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2044 = ADVANCED_FACE('',(#2045),#699,.F.); +#2045 = FACE_BOUND('',#2046,.T.); +#2046 = EDGE_LOOP('',(#2047,#2048,#2071,#2195)); +#2047 = ORIENTED_EDGE('',*,*,#1887,.F.); +#2048 = ORIENTED_EDGE('',*,*,#2049,.F.); +#2049 = EDGE_CURVE('',#2050,#1705,#2052,.T.); +#2050 = VERTEX_POINT('',#2051); +#2051 = CARTESIAN_POINT('',(-33.61257107057,42.536891523069, + -4.294533963375)); +#2052 = SURFACE_CURVE('',#2053,(#2058,#2064),.PCURVE_S1.); +#2053 = CIRCLE('',#2054,44.); +#2054 = AXIS2_PLACEMENT_3D('',#2055,#2056,#2057); +#2055 = CARTESIAN_POINT('',(7.943771349986,42.53689152307, + 10.164733552923)); +#2056 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#2057 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#2058 = PCURVE('',#699,#2059); +#2059 = DEFINITIONAL_REPRESENTATION('',(#2060),#2063); +#2060 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2061,#2062),.UNSPECIFIED.,.F., + .F.,(2,2),(3.476434406124,4.379312758934),.PIECEWISE_BEZIER_KNOTS.); +#2061 = CARTESIAN_POINT('',(-2.806750899934,-10.60000033774)); +#2062 = CARTESIAN_POINT('',(-1.90387254502,-10.60000033774)); +#2063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2064 = PCURVE('',#1367,#2065); +#2065 = DEFINITIONAL_REPRESENTATION('',(#2066),#2070); +#2066 = LINE('',#2067,#2068); +#2067 = CARTESIAN_POINT('',(-3.926990817008,1.570796326795)); +#2068 = VECTOR('',#2069,1.); +#2069 = DIRECTION('',(1.,1.647729008419E-14)); +#2070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2071 = ORIENTED_EDGE('',*,*,#2072,.F.); +#2072 = EDGE_CURVE('',#683,#2050,#2073,.T.); +#2073 = SURFACE_CURVE('',#2074,(#2093,#2144),.PCURVE_S1.); +#2074 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2075,#2076,#2077,#2078,#2079, + #2080,#2081,#2082,#2083,#2084,#2085,#2086,#2087,#2088,#2089,#2090, + #2091,#2092),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),(0., + 2.456815037107E-02,9.166811191693E-02,0.15663524809,0.221602384263, + 0.285517260335,0.349432136406,0.417581334442,0.443494601919), + .UNSPECIFIED.); +#2075 = CARTESIAN_POINT('',(-33.61145489111,39.23769037273, + -4.297741495748)); +#2076 = CARTESIAN_POINT('',(-33.58374043929,39.257606889256, + -4.377373806763)); +#2077 = CARTESIAN_POINT('',(-33.55603863392,39.283496515045, + -4.456223743906)); +#2078 = CARTESIAN_POINT('',(-33.45471965455,39.401283139238, + -4.742118899002)); +#2079 = CARTESIAN_POINT('',(-33.38472858499,39.53179190876, + -4.934329919135)); +#2080 = CARTESIAN_POINT('',(-33.27343012562,39.832964220685, + -5.23550223106)); +#2081 = CARTESIAN_POINT('',(-33.22409784357,40.022144613122, + -5.366374314682)); +#2082 = CARTESIAN_POINT('',(-33.15767737796,40.44079660306, + -5.54130598689)); +#2083 = CARTESIAN_POINT('',(-33.14074534841,40.670334372157, + -5.585266447075)); +#2084 = CARTESIAN_POINT('',(-33.14074534841,41.099941079639, + -5.585266447075)); +#2085 = CARTESIAN_POINT('',(-33.15713700873,41.326043545001, + -5.542704037792)); +#2086 = CARTESIAN_POINT('',(-33.22164109078,41.739530721398, + -5.372868647284)); +#2087 = CARTESIAN_POINT('',(-33.26960416533,41.926979402101, + -5.245694739567)); +#2088 = CARTESIAN_POINT('',(-33.37975925689,42.231924361481, + -4.947932378138)); +#2089 = CARTESIAN_POINT('',(-33.45048913759,42.366155213405, + -4.75390354955)); +#2090 = CARTESIAN_POINT('',(-33.55418481719,42.488631920061, + -4.461508312655)); +#2091 = CARTESIAN_POINT('',(-33.58337434546,42.516077861608, + -4.378446174025)); +#2092 = CARTESIAN_POINT('',(-33.61257107057,42.536891523068, + -4.294533963375)); +#2093 = PCURVE('',#699,#2094); +#2094 = DEFINITIONAL_REPRESENTATION('',(#2095),#2143); +#2095 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2096,#2097,#2098,#2099,#2100, + #2101,#2102,#2103,#2104,#2105,#2106,#2107,#2108,#2109,#2110,#2111, + #2112,#2113,#2114,#2115,#2116,#2117,#2118,#2119,#2120,#2121,#2122, + #2123,#2124,#2125,#2126,#2127,#2128,#2129,#2130,#2131,#2132,#2133, + #2134,#2135,#2136,#2137,#2138,#2139,#2140,#2141,#2142), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,1.007942277088E-02, + 2.015884554176E-02,3.023826831265E-02,4.031769108353E-02, + 5.039711385441E-02,6.047653662529E-02,7.055595939617E-02, + 8.063538216705E-02,9.071480493794E-02,0.100794227709,0.11087365048, + 0.120953073251,0.131032496021,0.141111918792,0.151191341563, + 0.161270764334,0.171350187105,0.181429609876,0.191509032647, + 0.201588455418,0.211667878189,0.221747300959,0.23182672373, + 0.241906146501,0.251985569272,0.262064992043,0.272144414814, + 0.282223837585,0.292303260356,0.302382683126,0.312462105897, + 0.322541528668,0.332620951439,0.34270037421,0.352779796981, + 0.362859219752,0.372938642523,0.383018065294,0.393097488064, + 0.403176910835,0.413256333606,0.423335756377,0.433415179148, + 0.443494601919),.UNSPECIFIED.); +#2096 = CARTESIAN_POINT('',(-2.80667371375,-7.300799187401)); +#2097 = CARTESIAN_POINT('',(-2.805887538415,-7.308973753385)); +#2098 = CARTESIAN_POINT('',(-2.804320836531,-7.327322050829)); +#2099 = CARTESIAN_POINT('',(-2.802002297834,-7.360760456436)); +#2100 = CARTESIAN_POINT('',(-2.79972999967,-7.399998786823)); +#2101 = CARTESIAN_POINT('',(-2.797518113225,-7.445041749217)); +#2102 = CARTESIAN_POINT('',(-2.795377200153,-7.495372236416)); +#2103 = CARTESIAN_POINT('',(-2.793318318086,-7.55057319442)); +#2104 = CARTESIAN_POINT('',(-2.791353075089,-7.610172147389)); +#2105 = CARTESIAN_POINT('',(-2.789490396441,-7.673818253637)); +#2106 = CARTESIAN_POINT('',(-2.787749400171,-7.740729556712)); +#2107 = CARTESIAN_POINT('',(-2.786111125848,-7.811726925065)); +#2108 = CARTESIAN_POINT('',(-2.784533739748,-7.888709683952)); +#2109 = CARTESIAN_POINT('',(-2.783046181058,-7.970596499685)); +#2110 = CARTESIAN_POINT('',(-2.781658889174,-8.057083448681)); +#2111 = CARTESIAN_POINT('',(-2.780387369042,-8.147660381185)); +#2112 = CARTESIAN_POINT('',(-2.779245370512,-8.241864642029)); +#2113 = CARTESIAN_POINT('',(-2.778248604038,-8.33924982387)); +#2114 = CARTESIAN_POINT('',(-2.777405640656,-8.439236263152)); +#2115 = CARTESIAN_POINT('',(-2.776715314432,-8.541046897811)); +#2116 = CARTESIAN_POINT('',(-2.776178362243,-8.643959079293)); +#2117 = CARTESIAN_POINT('',(-2.775795010808,-8.747178076496)); +#2118 = CARTESIAN_POINT('',(-2.775565626399,-8.850143075009)); +#2119 = CARTESIAN_POINT('',(-2.775490529135,-8.951429676197)); +#2120 = CARTESIAN_POINT('',(-2.775570085653,-9.052836271988)); +#2121 = CARTESIAN_POINT('',(-2.775804113593,-9.155903739875)); +#2122 = CARTESIAN_POINT('',(-2.776192408828,-9.259251995883)); +#2123 = CARTESIAN_POINT('',(-2.776734739542,-9.362284285875)); +#2124 = CARTESIAN_POINT('',(-2.777431007875,-9.464191497818)); +#2125 = CARTESIAN_POINT('',(-2.778280609698,-9.564230621431)); +#2126 = CARTESIAN_POINT('',(-2.779284833646,-9.661606597325)); +#2127 = CARTESIAN_POINT('',(-2.78043283148,-9.755764476971)); +#2128 = CARTESIAN_POINT('',(-2.781708987884,-9.84623446034)); +#2129 = CARTESIAN_POINT('',(-2.783099201696,-9.932539761515)); +#2130 = CARTESIAN_POINT('',(-2.784587742131,-10.01415305321)); +#2131 = CARTESIAN_POINT('',(-2.786163888656,-10.09075615949)); +#2132 = CARTESIAN_POINT('',(-2.787798516915,-10.16124484039)); +#2133 = CARTESIAN_POINT('',(-2.789553486958,-10.22841566685)); +#2134 = CARTESIAN_POINT('',(-2.791422332114,-10.29200925075)); +#2135 = CARTESIAN_POINT('',(-2.793393119435,-10.35154438222)); +#2136 = CARTESIAN_POINT('',(-2.795455372769,-10.4066003636)); +#2137 = CARTESIAN_POINT('',(-2.797598265167,-10.45673627021)); +#2138 = CARTESIAN_POINT('',(-2.799810928468,-10.50153157319)); +#2139 = CARTESIAN_POINT('',(-2.802083025456,-10.54050438746)); +#2140 = CARTESIAN_POINT('',(-2.804400179802,-10.57370748064)); +#2141 = CARTESIAN_POINT('',(-2.805965490137,-10.59190233219)); +#2142 = CARTESIAN_POINT('',(-2.806750899934,-10.60000033773)); +#2143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2144 = PCURVE('',#819,#2145); +#2145 = DEFINITIONAL_REPRESENTATION('',(#2146),#2194); +#2146 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2147,#2148,#2149,#2150,#2151, + #2152,#2153,#2154,#2155,#2156,#2157,#2158,#2159,#2160,#2161,#2162, + #2163,#2164,#2165,#2166,#2167,#2168,#2169,#2170,#2171,#2172,#2173, + #2174,#2175,#2176,#2177,#2178,#2179,#2180,#2181,#2182,#2183,#2184, + #2185,#2186,#2187,#2188,#2189,#2190,#2191,#2192,#2193), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,1.007942277088E-02, + 2.015884554176E-02,3.023826831265E-02,4.031769108353E-02, + 5.039711385441E-02,6.047653662529E-02,7.055595939617E-02, + 8.063538216705E-02,9.071480493794E-02,0.100794227709,0.11087365048, + 0.120953073251,0.131032496021,0.141111918792,0.151191341563, + 0.161270764334,0.171350187105,0.181429609876,0.191509032647, + 0.201588455418,0.211667878189,0.221747300959,0.23182672373, + 0.241906146501,0.251985569272,0.262064992043,0.272144414814, + 0.282223837585,0.292303260356,0.302382683126,0.312462105897, + 0.322541528668,0.332620951439,0.34270037421,0.352779796981, + 0.362859219752,0.372938642523,0.383018065294,0.393097488064, + 0.403176910835,0.413256333606,0.423335756377,0.433415179148, + 0.443494601919),.UNSPECIFIED.); +#2147 = CARTESIAN_POINT('',(0.245078398725,5.379053909079)); +#2148 = CARTESIAN_POINT('',(0.264889091525,5.39042403459)); +#2149 = CARTESIAN_POINT('',(0.304643794996,5.413160307319)); +#2150 = CARTESIAN_POINT('',(0.364543415759,5.447030826367)); +#2151 = CARTESIAN_POINT('',(0.424559089904,5.480443569172)); +#2152 = CARTESIAN_POINT('',(0.484606239686,5.513181408143)); +#2153 = CARTESIAN_POINT('',(0.544553129103,5.545060238591)); +#2154 = CARTESIAN_POINT('',(0.604252229279,5.575892542247)); +#2155 = CARTESIAN_POINT('',(0.663515467655,5.605481351155)); +#2156 = CARTESIAN_POINT('',(0.722243655119,5.633670909687)); +#2157 = CARTESIAN_POINT('',(0.779985845313,5.660150062595)); +#2158 = CARTESIAN_POINT('',(0.837623803528,5.685188040775)); +#2159 = CARTESIAN_POINT('',(0.896889617173,5.709401461612)); +#2160 = CARTESIAN_POINT('',(0.957050975188,5.732328387488)); +#2161 = CARTESIAN_POINT('',(1.01801829103,5.753788817583)); +#2162 = CARTESIAN_POINT('',(1.079542585167,5.773525672915)); +#2163 = CARTESIAN_POINT('',(1.141443515339,5.791308250348)); +#2164 = CARTESIAN_POINT('',(1.20356501809,5.806877421527)); +#2165 = CARTESIAN_POINT('',(1.26578751807,5.820068977618)); +#2166 = CARTESIAN_POINT('',(1.327943538432,5.830893548131)); +#2167 = CARTESIAN_POINT('',(1.389846671422,5.83932970879)); +#2168 = CARTESIAN_POINT('',(1.451255361218,5.845364626817)); +#2169 = CARTESIAN_POINT('',(1.51205741693,5.848983157231)); +#2170 = CARTESIAN_POINT('',(1.571636540204,5.850170812361)); +#2171 = CARTESIAN_POINT('',(1.63128979985,5.848912787239)); +#2172 = CARTESIAN_POINT('',(1.692162436111,5.845221535451)); +#2173 = CARTESIAN_POINT('',(1.753664338853,5.839109461701)); +#2174 = CARTESIAN_POINT('',(1.815663158809,5.830589504897)); +#2175 = CARTESIAN_POINT('',(1.877911313342,5.819672516022)); +#2176 = CARTESIAN_POINT('',(1.940214181568,5.806377163555)); +#2177 = CARTESIAN_POINT('',(2.002401158836,5.790692933915)); +#2178 = CARTESIAN_POINT('',(2.064344532878,5.772819126078)); +#2179 = CARTESIAN_POINT('',(2.125871825626,5.753012331617)); +#2180 = CARTESIAN_POINT('',(2.186789199702,5.731509032022)); +#2181 = CARTESIAN_POINT('',(2.246834959673,5.708569789174)); +#2182 = CARTESIAN_POINT('',(2.30590905371,5.684378953479)); +#2183 = CARTESIAN_POINT('',(2.363269374424,5.659401640851)); +#2184 = CARTESIAN_POINT('',(2.421366845918,5.632714894069)); +#2185 = CARTESIAN_POINT('',(2.480193355716,5.604436971072)); +#2186 = CARTESIAN_POINT('',(2.539545259895,5.574769693294)); +#2187 = CARTESIAN_POINT('',(2.599267766936,5.543892586039)); +#2188 = CARTESIAN_POINT('',(2.659200333963,5.511990795636)); +#2189 = CARTESIAN_POINT('',(2.719200697572,5.479249280446)); +#2190 = CARTESIAN_POINT('',(2.779153761439,5.445848129679)); +#2191 = CARTESIAN_POINT('',(2.838977955553,5.412005296898)); +#2192 = CARTESIAN_POINT('',(2.878676717453,5.389294233487)); +#2193 = CARTESIAN_POINT('',(2.898458683966,5.377937729618)); +#2194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2195 = ORIENTED_EDGE('',*,*,#682,.F.); +#2196 = ADVANCED_FACE('',(#2197),#819,.F.); +#2197 = FACE_BOUND('',#2198,.T.); +#2198 = EDGE_LOOP('',(#2199,#2224,#2350,#2474,#2475,#2476,#2597,#2598)); +#2199 = ORIENTED_EDGE('',*,*,#2200,.T.); +#2200 = EDGE_CURVE('',#2201,#2203,#2205,.T.); +#2201 = VERTEX_POINT('',#2202); +#2202 = CARTESIAN_POINT('',(-38.99050880019,42.586891492734, + -3.885266447075)); +#2203 = VERTEX_POINT('',#2204); +#2204 = CARTESIAN_POINT('',(-34.29813840867,42.586891492734, + -3.885266447181)); +#2205 = SEAM_CURVE('',#2206,(#2210,#2217),.PCURVE_S1.); +#2206 = LINE('',#2207,#2208); +#2207 = CARTESIAN_POINT('',(-38.99050880019,42.586891492734, + -3.885266447075)); +#2208 = VECTOR('',#2209,1.); +#2209 = DIRECTION('',(1.,-2.683038976192E-16,1.665334536928E-15)); +#2210 = PCURVE('',#819,#2211); +#2211 = DEFINITIONAL_REPRESENTATION('',(#2212),#2216); +#2212 = LINE('',#2213,#2214); +#2213 = CARTESIAN_POINT('',(-3.14159265359,-7.105427357601E-15)); +#2214 = VECTOR('',#2215,1.); +#2215 = DIRECTION('',(-0.,1.)); +#2216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2217 = PCURVE('',#819,#2218); +#2218 = DEFINITIONAL_REPRESENTATION('',(#2219),#2223); +#2219 = LINE('',#2220,#2221); +#2220 = CARTESIAN_POINT('',(3.14159265359,-7.105427357601E-15)); +#2221 = VECTOR('',#2222,1.); +#2222 = DIRECTION('',(-0.,1.)); +#2223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2224 = ORIENTED_EDGE('',*,*,#2225,.F.); +#2225 = EDGE_CURVE('',#2226,#2203,#2228,.T.); +#2226 = VERTEX_POINT('',#2227); +#2227 = CARTESIAN_POINT('',(-33.8883984464,42.536891523069, + -3.475998930774)); +#2228 = SURFACE_CURVE('',#2229,(#2248,#2299),.PCURVE_S1.); +#2229 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2230,#2231,#2232,#2233,#2234, + #2235,#2236,#2237,#2238,#2239,#2240,#2241,#2242,#2243,#2244,#2245, + #2246,#2247),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),( + 0.216440479809,0.234692671941,0.25066995406,0.26227634416, + 0.272351922324,0.280681976393,0.284932361272,0.288233335503, + 0.28839455601),.UNSPECIFIED.); +#2230 = CARTESIAN_POINT('',(-33.8883984464,42.536891523071, + -3.475998930787)); +#2231 = CARTESIAN_POINT('',(-33.95206773556,42.536891526272, + -3.475998943693)); +#2232 = CARTESIAN_POINT('',(-34.01273267932,42.538986456873, + -3.484193513202)); +#2233 = CARTESIAN_POINT('',(-34.11544520427,42.546055857978, + -3.514610179208)); +#2234 = CARTESIAN_POINT('',(-34.16176447413,42.55086479855, + -3.535797603328)); +#2235 = CARTESIAN_POINT('',(-34.23073706091,42.560787344713, + -3.587665349881)); +#2236 = CARTESIAN_POINT('',(-34.25602667373,42.565388482233, + -3.61392667364)); +#2237 = CARTESIAN_POINT('',(-34.29225082582,42.573647136791, + -3.671743646706)); +#2238 = CARTESIAN_POINT('',(-34.30401083435,42.577189763448, + -3.701173680759)); +#2239 = CARTESIAN_POINT('',(-34.31525439402,42.582371820527, + -3.75866121412)); +#2240 = CARTESIAN_POINT('',(-34.31635450496,42.584158756784, + -3.785275346952)); +#2241 = CARTESIAN_POINT('',(-34.31256351489,42.585898952248, + -3.825603692793)); +#2242 = CARTESIAN_POINT('',(-34.31034919676,42.586320107453, + -3.839182497342)); +#2243 = CARTESIAN_POINT('',(-34.3048994644,42.586779184862, + -3.863103095053)); +#2244 = CARTESIAN_POINT('',(-34.30200394779,42.586881728886, + -3.873484722697)); +#2245 = CARTESIAN_POINT('',(-34.29847081907,42.586891270923, + -3.884263410825)); +#2246 = CARTESIAN_POINT('',(-34.29830517277,42.586891492734, + -3.884765064087)); +#2247 = CARTESIAN_POINT('',(-34.29813840867,42.586891492734, + -3.885266447287)); +#2248 = PCURVE('',#819,#2249); +#2249 = DEFINITIONAL_REPRESENTATION('',(#2250),#2298); +#2250 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2251,#2252,#2253,#2254,#2255, + #2256,#2257,#2258,#2259,#2260,#2261,#2262,#2263,#2264,#2265,#2266, + #2267,#2268,#2269,#2270,#2271,#2272,#2273,#2274,#2275,#2276,#2277, + #2278,#2279,#2280,#2281,#2282,#2283,#2284,#2285,#2286,#2287,#2288, + #2289,#2290,#2291,#2292,#2293,#2294,#2295,#2296,#2297), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.216440479809, + 0.218075799723,0.219711119637,0.22134643955,0.222981759464, + 0.224617079378,0.226252399291,0.227887719205,0.229523039119, + 0.231158359032,0.232793678946,0.23442899886,0.236064318773, + 0.237699638687,0.239334958601,0.240970278514,0.242605598428, + 0.244240918342,0.245876238255,0.247511558169,0.249146878083, + 0.250782197996,0.25241751791,0.254052837824,0.255688157737, + 0.257323477651,0.258958797565,0.260594117478,0.262229437392, + 0.263864757305,0.265500077219,0.267135397133,0.268770717046, + 0.27040603696,0.272041356874,0.273676676787,0.275311996701, + 0.276947316615,0.278582636528,0.280217956442,0.281853276356, + 0.283488596269,0.285123916183,0.286759236097,0.28839455601), + .UNSPECIFIED.); +#2251 = CARTESIAN_POINT('',(-2.898458683972,5.102110353791)); +#2252 = CARTESIAN_POINT('',(-2.898458684663,5.096405852343)); +#2253 = CARTESIAN_POINT('',(-2.898538562485,5.085045083679)); +#2254 = CARTESIAN_POINT('',(-2.898897331685,5.068161109604)); +#2255 = CARTESIAN_POINT('',(-2.899494376076,5.05144679124)); +#2256 = CARTESIAN_POINT('',(-2.900329019859,5.034914603382)); +#2257 = CARTESIAN_POINT('',(-2.901400588423,5.018577028227)); +#2258 = CARTESIAN_POINT('',(-2.902708414866,5.002446520356)); +#2259 = CARTESIAN_POINT('',(-2.904251819017,4.986535637421)); +#2260 = CARTESIAN_POINT('',(-2.906030187319,4.970856552405)); +#2261 = CARTESIAN_POINT('',(-2.908042674424,4.955422873888)); +#2262 = CARTESIAN_POINT('',(-2.910289314832,4.940242852737)); +#2263 = CARTESIAN_POINT('',(-2.912766870408,4.925344735072)); +#2264 = CARTESIAN_POINT('',(-2.915484322173,4.910682143717)); +#2265 = CARTESIAN_POINT('',(-2.918477121708,4.896113965237)); +#2266 = CARTESIAN_POINT('',(-2.921744567912,4.881712893051)); +#2267 = CARTESIAN_POINT('',(-2.925295019985,4.867498148528)); +#2268 = CARTESIAN_POINT('',(-2.929134442466,4.853503295598)); +#2269 = CARTESIAN_POINT('',(-2.933269503445,4.839757999992)); +#2270 = CARTESIAN_POINT('',(-2.937706642127,4.826293177687)); +#2271 = CARTESIAN_POINT('',(-2.942452699281,4.813138641867)); +#2272 = CARTESIAN_POINT('',(-2.947513319403,4.800327366644)); +#2273 = CARTESIAN_POINT('',(-2.95289869486,4.787880785213)); +#2274 = CARTESIAN_POINT('',(-2.958601916693,4.7758639607)); +#2275 = CARTESIAN_POINT('',(-2.964615851697,4.764335173904)); +#2276 = CARTESIAN_POINT('',(-2.970944467219,4.753324843821)); +#2277 = CARTESIAN_POINT('',(-2.97758854736,4.742871201898)); +#2278 = CARTESIAN_POINT('',(-2.984551017937,4.733009091575)); +#2279 = CARTESIAN_POINT('',(-2.991829933182,4.72377909587)); +#2280 = CARTESIAN_POINT('',(-2.999441199716,4.715202227498)); +#2281 = CARTESIAN_POINT('',(-3.007334682392,4.707372040811)); +#2282 = CARTESIAN_POINT('',(-3.015438893175,4.700371587405)); +#2283 = CARTESIAN_POINT('',(-3.023762503041,4.694196035777)); +#2284 = CARTESIAN_POINT('',(-3.032293516322,4.688863758294)); +#2285 = CARTESIAN_POINT('',(-3.041023161779,4.684387949427)); +#2286 = CARTESIAN_POINT('',(-3.049950961618,4.680779311358)); +#2287 = CARTESIAN_POINT('',(-3.059040600663,4.678063693323)); +#2288 = CARTESIAN_POINT('',(-3.068173996451,4.676264077199)); +#2289 = CARTESIAN_POINT('',(-3.077363351227,4.675353638493)); +#2290 = CARTESIAN_POINT('',(-3.086588751737,4.675317819565)); +#2291 = CARTESIAN_POINT('',(-3.095840296589,4.676138655172)); +#2292 = CARTESIAN_POINT('',(-3.10510029416,4.677799543628)); +#2293 = CARTESIAN_POINT('',(-3.114316428873,4.680269252146)); +#2294 = CARTESIAN_POINT('',(-3.123485012262,4.683521470731)); +#2295 = CARTESIAN_POINT('',(-3.132586545863,4.687526657754)); +#2296 = CARTESIAN_POINT('',(-3.13860109748,4.690678793403)); +#2297 = CARTESIAN_POINT('',(-3.141592653714,4.692370391513)); +#2298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2299 = PCURVE('',#1367,#2300); +#2300 = DEFINITIONAL_REPRESENTATION('',(#2301),#2349); +#2301 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2302,#2303,#2304,#2305,#2306, + #2307,#2308,#2309,#2310,#2311,#2312,#2313,#2314,#2315,#2316,#2317, + #2318,#2319,#2320,#2321,#2322,#2323,#2324,#2325,#2326,#2327,#2328, + #2329,#2330,#2331,#2332,#2333,#2334,#2335,#2336,#2337,#2338,#2339, + #2340,#2341,#2342,#2343,#2344,#2345,#2346,#2347,#2348), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.216440479809, + 0.218075799723,0.219711119637,0.22134643955,0.222981759464, + 0.224617079378,0.226252399291,0.227887719205,0.229523039119, + 0.231158359032,0.232793678946,0.23442899886,0.236064318773, + 0.237699638687,0.239334958601,0.240970278514,0.242605598428, + 0.244240918342,0.245876238255,0.247511558169,0.249146878083, + 0.250782197996,0.25241751791,0.254052837824,0.255688157737, + 0.257323477651,0.258958797565,0.260594117478,0.262229437392, + 0.263864757305,0.265500077219,0.267135397133,0.268770717046, + 0.27040603696,0.272041356874,0.273676676787,0.275311996701, + 0.276947316615,0.278582636528,0.280217956442,0.281853276356, + 0.283488596269,0.285123916183,0.286759236097,0.28839455601), + .UNSPECIFIED.); +#2302 = CARTESIAN_POINT('',(-0.470187622027,1.570796273908)); +#2303 = CARTESIAN_POINT('',(-0.47022781498,1.568787590416)); +#2304 = CARTESIAN_POINT('',(-0.470304988524,1.564772019826)); +#2305 = CARTESIAN_POINT('',(-0.470411050803,1.558758364399)); +#2306 = CARTESIAN_POINT('',(-0.470507354031,1.552758717781)); +#2307 = CARTESIAN_POINT('',(-0.470593837412,1.546777398545)); +#2308 = CARTESIAN_POINT('',(-0.470670440244,1.540818733105)); +#2309 = CARTESIAN_POINT('',(-0.470737101959,1.534887041672)); +#2310 = CARTESIAN_POINT('',(-0.470793761921,1.528986686411)); +#2311 = CARTESIAN_POINT('',(-0.470840360011,1.523121882583)); +#2312 = CARTESIAN_POINT('',(-0.470876834333,1.517297395779)); +#2313 = CARTESIAN_POINT('',(-0.470903129625,1.511515932111)); +#2314 = CARTESIAN_POINT('',(-0.470919165725,1.505787870875)); +#2315 = CARTESIAN_POINT('',(-0.470924955132,1.500094934854)); +#2316 = CARTESIAN_POINT('',(-0.470920213953,1.494380276842)); +#2317 = CARTESIAN_POINT('',(-0.470904437287,1.488669383724)); +#2318 = CARTESIAN_POINT('',(-0.470877176925,1.482967165808)); +#2319 = CARTESIAN_POINT('',(-0.470837970266,1.477284059918)); +#2320 = CARTESIAN_POINT('',(-0.470786358802,1.471628999891)); +#2321 = CARTESIAN_POINT('',(-0.470721884837,1.466011407557)); +#2322 = CARTESIAN_POINT('',(-0.470644085659,1.460440234329)); +#2323 = CARTESIAN_POINT('',(-0.470552519633,1.45492578021)); +#2324 = CARTESIAN_POINT('',(-0.470446667133,1.449473353266)); +#2325 = CARTESIAN_POINT('',(-0.470326304371,1.444107061144)); +#2326 = CARTESIAN_POINT('',(-0.470191248428,1.438848809945)); +#2327 = CARTESIAN_POINT('',(-0.470041124078,1.433708486909)); +#2328 = CARTESIAN_POINT('',(-0.469875615733,1.428699400479)); +#2329 = CARTESIAN_POINT('',(-0.469694357516,1.423833257309)); +#2330 = CARTESIAN_POINT('',(-0.469497120199,1.419124788064)); +#2331 = CARTESIAN_POINT('',(-0.469283172531,1.414578243486)); +#2332 = CARTESIAN_POINT('',(-0.469053648094,1.410236763273)); +#2333 = CARTESIAN_POINT('',(-0.46881052665,1.406144217566)); +#2334 = CARTESIAN_POINT('',(-0.468553526276,1.402297377798)); +#2335 = CARTESIAN_POINT('',(-0.468282945597,1.39870539069)); +#2336 = CARTESIAN_POINT('',(-0.467999005552,1.395374961519)); +#2337 = CARTESIAN_POINT('',(-0.467701646331,1.39231027668)); +#2338 = CARTESIAN_POINT('',(-0.467391997755,1.389528127066)); +#2339 = CARTESIAN_POINT('',(-0.467074177091,1.387060610842)); +#2340 = CARTESIAN_POINT('',(-0.466747943711,1.384896033167)); +#2341 = CARTESIAN_POINT('',(-0.466414130525,1.383033515757)); +#2342 = CARTESIAN_POINT('',(-0.466073232587,1.381468982278)); +#2343 = CARTESIAN_POINT('',(-0.465726017808,1.380200442941)); +#2344 = CARTESIAN_POINT('',(-0.465374615971,1.379227432238)); +#2345 = CARTESIAN_POINT('',(-0.4650193585,1.37854154016)); +#2346 = CARTESIAN_POINT('',(-0.464661172394,1.378136359929)); +#2347 = CARTESIAN_POINT('',(-0.464420883429,1.378048034431)); +#2348 = CARTESIAN_POINT('',(-0.464300489638,1.378048060515)); +#2349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2350 = ORIENTED_EDGE('',*,*,#2351,.F.); +#2351 = EDGE_CURVE('',#711,#2226,#2352,.T.); +#2352 = SURFACE_CURVE('',#2353,(#2372,#2423),.PCURVE_S1.); +#2353 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2354,#2355,#2356,#2357,#2358, + #2359,#2360,#2361,#2362,#2363,#2364,#2365,#2366,#2367,#2368,#2369, + #2370,#2371),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),( + 0.306526435793,0.330750401804,0.397366608171,0.462005129132, + 0.526643650092,0.590476527427,0.654309404761,0.721730030867, + 0.747060068807),.UNSPECIFIED.); +#2354 = CARTESIAN_POINT('',(-33.88944423007,39.23769037273, + -3.472791398402)); +#2355 = CARTESIAN_POINT('',(-33.91519519186,39.25744656321, + -3.393800119847)); +#2356 = CARTESIAN_POINT('',(-33.94047857673,39.283107073172, + -3.315474957728)); +#2357 = CARTESIAN_POINT('',(-34.03187576422,39.400500836916, + -3.029714850401)); +#2358 = CARTESIAN_POINT('',(-34.09180166109,39.531329816208, + -2.836665067567)); +#2359 = CARTESIAN_POINT('',(-34.1841266408,39.833733632658, + -2.534261251116)); +#2360 = CARTESIAN_POINT('',(-34.22318946399,40.023597862127, + -2.403309632433)); +#2361 = CARTESIAN_POINT('',(-34.27481483544,40.442439650067, + -2.228783876109)); +#2362 = CARTESIAN_POINT('',(-34.28746723811,40.671429756198, + -2.185266447075)); +#2363 = CARTESIAN_POINT('',(-34.28746723811,41.099667750514, + -2.185266447075)); +#2364 = CARTESIAN_POINT('',(-34.27512417437,41.326005380819, + -2.227715135236)); +#2365 = CARTESIAN_POINT('',(-34.22467750307,41.740842315802, + -2.39830131711)); +#2366 = CARTESIAN_POINT('',(-34.18648889207,41.929354690712, + -2.526381872944)); +#2367 = CARTESIAN_POINT('',(-34.09506446845,42.234668812468, + -2.826117306831)); +#2368 = CARTESIAN_POINT('',(-34.03475536802,42.368388882511, + -3.020585474976)); +#2369 = CARTESIAN_POINT('',(-33.94172307107,42.489499053114, + -3.311628448626)); +#2370 = CARTESIAN_POINT('',(-33.91531299678,42.516418444589, + -3.393459812067)); +#2371 = CARTESIAN_POINT('',(-33.8883984464,42.536891523068, + -3.475998930774)); +#2372 = PCURVE('',#819,#2373); +#2373 = DEFINITIONAL_REPRESENTATION('',(#2374),#2422); +#2374 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2375,#2376,#2377,#2378,#2379, + #2380,#2381,#2382,#2383,#2384,#2385,#2386,#2387,#2388,#2389,#2390, + #2391,#2392,#2393,#2394,#2395,#2396,#2397,#2398,#2399,#2400,#2401, + #2402,#2403,#2404,#2405,#2406,#2407,#2408,#2409,#2410,#2411,#2412, + #2413,#2414,#2415,#2416,#2417,#2418,#2419,#2420,#2421), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.306526435793, + 0.316538563816,0.326550691839,0.336562819862,0.346574947885, + 0.356587075908,0.366599203931,0.376611331954,0.386623459977, + 0.396635588,0.406647716023,0.416659844046,0.426671972069, + 0.436684100092,0.446696228116,0.456708356139,0.466720484162, + 0.476732612185,0.486744740208,0.496756868231,0.506768996254, + 0.516781124277,0.5267932523,0.536805380323,0.546817508346, + 0.556829636369,0.566841764392,0.576853892415,0.586866020438, + 0.596878148461,0.606890276484,0.616902404507,0.62691453253, + 0.636926660554,0.646938788577,0.6569509166,0.666963044623, + 0.676975172646,0.686987300669,0.696999428692,0.707011556715, + 0.717023684738,0.727035812761,0.737047940784,0.747060068807), + .UNSPECIFIED.); +#2375 = CARTESIAN_POINT('',(-0.245078398725,5.101064570117)); +#2376 = CARTESIAN_POINT('',(-0.264875960099,5.090421605331)); +#2377 = CARTESIAN_POINT('',(-0.30462508278,5.069294634284)); +#2378 = CARTESIAN_POINT('',(-0.364571884216,5.038270709783)); +#2379 = CARTESIAN_POINT('',(-0.424682730433,5.0081061158)); +#2380 = CARTESIAN_POINT('',(-0.484869214675,4.978982653938)); +#2381 = CARTESIAN_POINT('',(-0.544987394125,4.951011643955)); +#2382 = CARTESIAN_POINT('',(-0.604879445134,4.924315466806)); +#2383 = CARTESIAN_POINT('',(-0.664344700651,4.899022817472)); +#2384 = CARTESIAN_POINT('',(-0.723279530538,4.875226073622)); +#2385 = CARTESIAN_POINT('',(-0.781201853421,4.853156568155)); +#2386 = CARTESIAN_POINT('',(-0.839067124752,4.832526130365)); +#2387 = CARTESIAN_POINT('',(-0.898486744373,4.81282114993)); +#2388 = CARTESIAN_POINT('',(-0.958756375471,4.794369241897)); +#2389 = CARTESIAN_POINT('',(-1.019780489655,4.777275858291)); +#2390 = CARTESIAN_POINT('',(-1.081312173663,4.761707471581)); +#2391 = CARTESIAN_POINT('',(-1.143170036607,4.74780863549)); +#2392 = CARTESIAN_POINT('',(-1.20519653787,4.735750558281)); +#2393 = CARTESIAN_POINT('',(-1.267269303066,4.725594012432)); +#2394 = CARTESIAN_POINT('',(-1.329225483451,4.717311949781)); +#2395 = CARTESIAN_POINT('',(-1.390881995475,4.710897262076)); +#2396 = CARTESIAN_POINT('',(-1.451998967044,4.706337483705)); +#2397 = CARTESIAN_POINT('',(-1.512469649384,4.703621638586)); +#2398 = CARTESIAN_POINT('',(-1.571664370938,4.702738149876)); +#2399 = CARTESIAN_POINT('',(-1.630931693587,4.703676354734)); +#2400 = CARTESIAN_POINT('',(-1.691460944462,4.706449242328)); +#2401 = CARTESIAN_POINT('',(-1.752654192903,4.711069189773)); +#2402 = CARTESIAN_POINT('',(-1.814386530126,4.717548325587)); +#2403 = CARTESIAN_POINT('',(-1.87641467009,4.72590038473)); +#2404 = CARTESIAN_POINT('',(-1.938549548485,4.73613292499)); +#2405 = CARTESIAN_POINT('',(-2.000626193132,4.748276606401)); +#2406 = CARTESIAN_POINT('',(-2.062515831715,4.762247500644)); +#2407 = CARTESIAN_POINT('',(-2.124048133075,4.777874155986)); +#2408 = CARTESIAN_POINT('',(-2.185032373942,4.795009545031)); +#2409 = CARTESIAN_POINT('',(-2.245208050353,4.813483723296)); +#2410 = CARTESIAN_POINT('',(-2.304486574266,4.833193990314)); +#2411 = CARTESIAN_POINT('',(-2.362101286725,4.853791586634)); +#2412 = CARTESIAN_POINT('',(-2.420317458064,4.876020818476)); +#2413 = CARTESIAN_POINT('',(-2.479330870263,4.899894011597)); +#2414 = CARTESIAN_POINT('',(-2.538869445548,4.925257645405)); +#2415 = CARTESIAN_POINT('',(-2.598781317264,4.952002424233)); +#2416 = CARTESIAN_POINT('',(-2.658888540935,4.980007999067)); +#2417 = CARTESIAN_POINT('',(-2.719037124144,5.009154009359)); +#2418 = CARTESIAN_POINT('',(-2.779096784239,5.039331194043)); +#2419 = CARTESIAN_POINT('',(-2.838982136708,5.070352686055)); +#2420 = CARTESIAN_POINT('',(-2.878685080477,5.091472133214)); +#2421 = CARTESIAN_POINT('',(-2.898458683965,5.102110353791)); +#2422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2423 = PCURVE('',#912,#2424); +#2424 = DEFINITIONAL_REPRESENTATION('',(#2425),#2473); +#2425 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2426,#2427,#2428,#2429,#2430, + #2431,#2432,#2433,#2434,#2435,#2436,#2437,#2438,#2439,#2440,#2441, + #2442,#2443,#2444,#2445,#2446,#2447,#2448,#2449,#2450,#2451,#2452, + #2453,#2454,#2455,#2456,#2457,#2458,#2459,#2460,#2461,#2462,#2463, + #2464,#2465,#2466,#2467,#2468,#2469,#2470,#2471,#2472), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.306526435793, + 0.316538563816,0.326550691839,0.336562819862,0.346574947885, + 0.356587075908,0.366599203931,0.376611331954,0.386623459977, + 0.396635588,0.406647716023,0.416659844046,0.426671972069, + 0.436684100092,0.446696228116,0.456708356139,0.466720484162, + 0.476732612185,0.486744740208,0.496756868231,0.506768996254, + 0.516781124277,0.5267932523,0.536805380323,0.546817508346, + 0.556829636369,0.566841764392,0.576853892415,0.586866020438, + 0.596878148461,0.606890276484,0.616902404507,0.62691453253, + 0.636926660554,0.646938788577,0.6569509166,0.666963044623, + 0.676975172646,0.686987300669,0.696999428692,0.707011556715, + 0.717023684738,0.727035812761,0.737047940784,0.747060068807), + .UNSPECIFIED.); +#2426 = CARTESIAN_POINT('',(-2.826458786397,-7.300799187401)); +#2427 = CARTESIAN_POINT('',(-2.827239209989,-7.308968697981)); +#2428 = CARTESIAN_POINT('',(-2.828794055704,-7.327312112587)); +#2429 = CARTESIAN_POINT('',(-2.831093582347,-7.36077444887)); +#2430 = CARTESIAN_POINT('',(-2.833345441335,-7.400084754248)); +#2431 = CARTESIAN_POINT('',(-2.83553536567,-7.445260261036)); +#2432 = CARTESIAN_POINT('',(-2.83765290003,-7.495770187936)); +#2433 = CARTESIAN_POINT('',(-2.83968704566,-7.551192745785)); +#2434 = CARTESIAN_POINT('',(-2.841626225378,-7.611046163258)); +#2435 = CARTESIAN_POINT('',(-2.843461704479,-7.674979605538)); +#2436 = CARTESIAN_POINT('',(-2.845173944906,-7.74217847394)); +#2437 = CARTESIAN_POINT('',(-2.846783769869,-7.813552288749)); +#2438 = CARTESIAN_POINT('',(-2.848329468144,-7.890835324838)); +#2439 = CARTESIAN_POINT('',(-2.849783972096,-7.972970538019)); +#2440 = CARTESIAN_POINT('',(-2.851137471004,-8.059636152493)); +#2441 = CARTESIAN_POINT('',(-2.852375417984,-8.150315470792)); +#2442 = CARTESIAN_POINT('',(-2.853484946899,-8.244536213729)); +#2443 = CARTESIAN_POINT('',(-2.85445119919,-8.341843350666)); +#2444 = CARTESIAN_POINT('',(-2.855266965015,-8.441642356065)); +#2445 = CARTESIAN_POINT('',(-2.855933846336,-8.54316419317)); +#2446 = CARTESIAN_POINT('',(-2.856451647061,-8.645691763597)); +#2447 = CARTESIAN_POINT('',(-2.856820653182,-8.748434537372)); +#2448 = CARTESIAN_POINT('',(-2.857041018814,-8.8508437725)); +#2449 = CARTESIAN_POINT('',(-2.857112941765,-8.951477006667)); +#2450 = CARTESIAN_POINT('',(-2.857036575623,-9.052227516002)); +#2451 = CARTESIAN_POINT('',(-2.856811619279,-9.1547185486)); +#2452 = CARTESIAN_POINT('',(-2.856437792302,-9.25756151683)); +#2453 = CARTESIAN_POINT('',(-2.855914842245,-9.360175497072)); +#2454 = CARTESIAN_POINT('',(-2.855242382735,-9.461760745388)); +#2455 = CARTESIAN_POINT('',(-2.854420533413,-9.561585135094)); +#2456 = CARTESIAN_POINT('',(-2.853447522264,-9.658864890814)); +#2457 = CARTESIAN_POINT('',(-2.852332406663,-9.753026320813)); +#2458 = CARTESIAN_POINT('',(-2.85108998789,-9.843596856269)); +#2459 = CARTESIAN_POINT('',(-2.849733350521,-9.930094723265)); +#2460 = CARTESIAN_POINT('',(-2.84827731115,-10.01198542496)); +#2461 = CARTESIAN_POINT('',(-2.846731469292,-10.08895456131)); +#2462 = CARTESIAN_POINT('',(-2.845124553622,-10.15986006806)); +#2463 = CARTESIAN_POINT('',(-2.843400293584,-10.22724656137)); +#2464 = CARTESIAN_POINT('',(-2.841559292414,-10.29110686741)); +#2465 = CARTESIAN_POINT('',(-2.839615053354,-10.3508801705)); +#2466 = CARTESIAN_POINT('',(-2.837577632813,-10.40615537032)); +#2467 = CARTESIAN_POINT('',(-2.835457964584,-10.45647614699)); +#2468 = CARTESIAN_POINT('',(-2.833266907602,-10.50141734351)); +#2469 = CARTESIAN_POINT('',(-2.831014727886,-10.54047437089)); +#2470 = CARTESIAN_POINT('',(-2.828715927513,-10.57371052854)); +#2471 = CARTESIAN_POINT('',(-2.827162001593,-10.59190528077)); +#2472 = CARTESIAN_POINT('',(-2.826382111141,-10.60000033773)); +#2473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2474 = ORIENTED_EDGE('',*,*,#710,.F.); +#2475 = ORIENTED_EDGE('',*,*,#2072,.T.); +#2476 = ORIENTED_EDGE('',*,*,#2477,.F.); +#2477 = EDGE_CURVE('',#2203,#2050,#2478,.T.); +#2478 = SURFACE_CURVE('',#2479,(#2495,#2546),.PCURVE_S1.); +#2479 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2480,#2481,#2482,#2483,#2484, + #2485,#2486,#2487,#2488,#2489,#2490,#2491,#2492,#2493,#2494), + .UNSPECIFIED.,.F.,.F.,(4,2,2,3,2,2,4),(0.28839455601,0.291762923448, + 0.297197202769,0.306383775,0.331691410475,0.3563234543, + 0.366231396817),.UNSPECIFIED.); +#2480 = CARTESIAN_POINT('',(-34.29813840867,42.586891492734, + -3.885266447287)); +#2481 = CARTESIAN_POINT('',(-34.29465421945,42.586891492733, + -3.895741807191)); +#2482 = CARTESIAN_POINT('',(-34.29068200213,42.586794520206, + -3.906099249309)); +#2483 = CARTESIAN_POINT('',(-34.27914378912,42.586307119857, + -3.932785106256)); +#2484 = CARTESIAN_POINT('',(-34.270880426,42.585773453439, + -3.948850631414)); +#2485 = CARTESIAN_POINT('',(-34.2461053698,42.583821260164, + -3.990734023837)); +#2486 = CARTESIAN_POINT('',(-34.22789162087,42.582050933816, + -4.01554430736)); +#2487 = CARTESIAN_POINT('',(-34.20789538009,42.579958572833, + -4.038641354684)); +#2488 = CARTESIAN_POINT('',(-34.15280872101,42.574194430594, + -4.102270273019)); +#2489 = CARTESIAN_POINT('',(-34.07962855794,42.565411715799, + -4.158279816712)); +#2490 = CARTESIAN_POINT('',(-33.91036673333,42.549116053054, + -4.244254417338)); +#2491 = CARTESIAN_POINT('',(-33.81774409476,42.542047839244, + -4.27339250585)); +#2492 = CARTESIAN_POINT('',(-33.68624724073,42.537553063841, + -4.29189429622)); +#2493 = CARTESIAN_POINT('',(-33.64894005496,42.536891524875, + -4.294533956088)); +#2494 = CARTESIAN_POINT('',(-33.61257107057,42.536891523071, + -4.294533963363)); +#2495 = PCURVE('',#819,#2496); +#2496 = DEFINITIONAL_REPRESENTATION('',(#2497),#2545); +#2497 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2498,#2499,#2500,#2501,#2502, + #2503,#2504,#2505,#2506,#2507,#2508,#2509,#2510,#2511,#2512,#2513, + #2514,#2515,#2516,#2517,#2518,#2519,#2520,#2521,#2522,#2523,#2524, + #2525,#2526,#2527,#2528,#2529,#2530,#2531,#2532,#2533,#2534,#2535, + #2536,#2537,#2538,#2539,#2540,#2541,#2542,#2543,#2544), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.28839455601, + 0.29016357512,0.291932594229,0.293701613338,0.295470632447, + 0.297239651557,0.299008670666,0.300777689775,0.302546708884, + 0.304315727994,0.306084747103,0.307853766212,0.309622785321, + 0.31139180443,0.31316082354,0.314929842649,0.316698861758, + 0.318467880867,0.320236899977,0.322005919086,0.323774938195, + 0.325543957304,0.327312976414,0.329081995523,0.330851014632, + 0.332620033741,0.334389052851,0.33615807196,0.337927091069, + 0.339696110178,0.341465129287,0.343234148397,0.345003167506, + 0.346772186615,0.348541205724,0.350310224834,0.352079243943, + 0.353848263052,0.355617282161,0.357386301271,0.35915532038, + 0.360924339489,0.362693358598,0.364462377708,0.366231396817), + .UNSPECIFIED.); +#2498 = CARTESIAN_POINT('',(3.141592653465,4.692370391513)); +#2499 = CARTESIAN_POINT('',(3.138357088422,4.694199694437)); +#2500 = CARTESIAN_POINT('',(3.13192238909,4.698129163796)); +#2501 = CARTESIAN_POINT('',(3.122398457064,4.704791725347)); +#2502 = CARTESIAN_POINT('',(3.113022685312,4.712178729474)); +#2503 = CARTESIAN_POINT('',(3.103810852063,4.720245147926)); +#2504 = CARTESIAN_POINT('',(3.094769912883,4.728953828926)); +#2505 = CARTESIAN_POINT('',(3.08591788432,4.738255899689)); +#2506 = CARTESIAN_POINT('',(3.077265496952,4.748107705052)); +#2507 = CARTESIAN_POINT('',(3.068816573944,4.758473287061)); +#2508 = CARTESIAN_POINT('',(3.060574515497,4.769317877086)); +#2509 = CARTESIAN_POINT('',(3.052551860926,4.780594251989)); +#2510 = CARTESIAN_POINT('',(3.044725533489,4.792303817346)); +#2511 = CARTESIAN_POINT('',(3.037013168052,4.804557987188)); +#2512 = CARTESIAN_POINT('',(3.029441947343,4.817315663982)); +#2513 = CARTESIAN_POINT('',(3.022011927352,4.83057357448)); +#2514 = CARTESIAN_POINT('',(3.01473050954,4.844318310466)); +#2515 = CARTESIAN_POINT('',(3.007603199172,4.858539179306)); +#2516 = CARTESIAN_POINT('',(3.000636076917,4.873224761007)); +#2517 = CARTESIAN_POINT('',(2.993835132665,4.888363829433)); +#2518 = CARTESIAN_POINT('',(2.987206438729,4.903945110378)); +#2519 = CARTESIAN_POINT('',(2.980756104841,4.919957328055)); +#2520 = CARTESIAN_POINT('',(2.974490268197,4.936389261074)); +#2521 = CARTESIAN_POINT('',(2.968415163122,4.953229472043)); +#2522 = CARTESIAN_POINT('',(2.962536838828,4.970467333172)); +#2523 = CARTESIAN_POINT('',(2.956862206761,4.988089194268)); +#2524 = CARTESIAN_POINT('',(2.951395123068,5.006092685151)); +#2525 = CARTESIAN_POINT('',(2.9461739091,5.024360883796)); +#2526 = CARTESIAN_POINT('',(2.94119857618,5.042887114598)); +#2527 = CARTESIAN_POINT('',(2.936474261681,5.06165067019)); +#2528 = CARTESIAN_POINT('',(2.932004757724,5.08063460301)); +#2529 = CARTESIAN_POINT('',(2.927794245891,5.099820958039)); +#2530 = CARTESIAN_POINT('',(2.923846832941,5.119192050282)); +#2531 = CARTESIAN_POINT('',(2.920166675436,5.138730122109)); +#2532 = CARTESIAN_POINT('',(2.916757946475,5.158417436403)); +#2533 = CARTESIAN_POINT('',(2.913624843546,5.178236246629)); +#2534 = CARTESIAN_POINT('',(2.910771587888,5.198168823406)); +#2535 = CARTESIAN_POINT('',(2.908202414579,5.218197378164)); +#2536 = CARTESIAN_POINT('',(2.905921605654,5.238304341931)); +#2537 = CARTESIAN_POINT('',(2.903933357516,5.258471326534)); +#2538 = CARTESIAN_POINT('',(2.902242264908,5.278683001001)); +#2539 = CARTESIAN_POINT('',(2.900860990094,5.298788321024)); +#2540 = CARTESIAN_POINT('',(2.89978697064,5.318790332383)); +#2541 = CARTESIAN_POINT('',(2.89902040232,5.338665487324)); +#2542 = CARTESIAN_POINT('',(2.898560743923,5.358397366257)); +#2543 = CARTESIAN_POINT('',(2.898458684829,5.371444209066)); +#2544 = CARTESIAN_POINT('',(2.898458683972,5.377937729618)); +#2545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2546 = PCURVE('',#1367,#2547); +#2547 = DEFINITIONAL_REPRESENTATION('',(#2548),#2596); +#2548 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2549,#2550,#2551,#2552,#2553, + #2554,#2555,#2556,#2557,#2558,#2559,#2560,#2561,#2562,#2563,#2564, + #2565,#2566,#2567,#2568,#2569,#2570,#2571,#2572,#2573,#2574,#2575, + #2576,#2577,#2578,#2579,#2580,#2581,#2582,#2583,#2584,#2585,#2586, + #2587,#2588,#2589,#2590,#2591,#2592,#2593,#2594,#2595), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.28839455601, + 0.29016357512,0.291932594229,0.293701613338,0.295470632447, + 0.297239651557,0.299008670666,0.300777689775,0.302546708884, + 0.304315727994,0.306084747103,0.307853766212,0.309622785321, + 0.31139180443,0.31316082354,0.314929842649,0.316698861758, + 0.318467880867,0.320236899977,0.322005919086,0.323774938195, + 0.325543957304,0.327312976414,0.329081995523,0.330851014632, + 0.332620033741,0.334389052851,0.33615807196,0.337927091069, + 0.339696110178,0.341465129287,0.343234148397,0.345003167506, + 0.346772186615,0.348541205724,0.350310224834,0.352079243943, + 0.353848263052,0.355617282161,0.357386301271,0.35915532038, + 0.360924339489,0.362693358598,0.364462377708,0.366231396817), + .UNSPECIFIED.); +#2549 = CARTESIAN_POINT('',(-0.464300489638,1.378048060515)); +#2550 = CARTESIAN_POINT('',(-0.464170277532,1.378047990119)); +#2551 = CARTESIAN_POINT('',(-0.463909253635,1.378151366687)); +#2552 = CARTESIAN_POINT('',(-0.463516923266,1.378605052371)); +#2553 = CARTESIAN_POINT('',(-0.463124845642,1.379345817212)); +#2554 = CARTESIAN_POINT('',(-0.462733918438,1.380360756032)); +#2555 = CARTESIAN_POINT('',(-0.462344662101,1.381637991912)); +#2556 = CARTESIAN_POINT('',(-0.461958079329,1.383163704354)); +#2557 = CARTESIAN_POINT('',(-0.461574869129,1.384924382507)); +#2558 = CARTESIAN_POINT('',(-0.461195423906,1.386907860064)); +#2559 = CARTESIAN_POINT('',(-0.460820110843,1.389102310431)); +#2560 = CARTESIAN_POINT('',(-0.460449714215,1.391493294538)); +#2561 = CARTESIAN_POINT('',(-0.460083384921,1.394076575725)); +#2562 = CARTESIAN_POINT('',(-0.459717348954,1.396875047394)); +#2563 = CARTESIAN_POINT('',(-0.45935287122,1.399879203728)); +#2564 = CARTESIAN_POINT('',(-0.458989966202,1.403087592832)); +#2565 = CARTESIAN_POINT('',(-0.458628984151,1.406496632334)); +#2566 = CARTESIAN_POINT('',(-0.458270186105,1.410103339251)); +#2567 = CARTESIAN_POINT('',(-0.457913857798,1.413904599438)); +#2568 = CARTESIAN_POINT('',(-0.457560279199,1.417897363586)); +#2569 = CARTESIAN_POINT('',(-0.457209732627,1.422078596691)); +#2570 = CARTESIAN_POINT('',(-0.456862500921,1.426445286474)); +#2571 = CARTESIAN_POINT('',(-0.456518866815,1.430994462)); +#2572 = CARTESIAN_POINT('',(-0.456179117438,1.435723112116)); +#2573 = CARTESIAN_POINT('',(-0.455843527094,1.440628494077)); +#2574 = CARTESIAN_POINT('',(-0.455512421807,1.445706981363)); +#2575 = CARTESIAN_POINT('',(-0.455185938504,1.450958364328)); +#2576 = CARTESIAN_POINT('',(-0.454866251154,1.456348521065)); +#2577 = CARTESIAN_POINT('',(-0.454553393765,1.461875151604)); +#2578 = CARTESIAN_POINT('',(-0.454247681846,1.467531962463)); +#2579 = CARTESIAN_POINT('',(-0.453949356881,1.473313753012)); +#2580 = CARTESIAN_POINT('',(-0.453658681588,1.479215053791)); +#2581 = CARTESIAN_POINT('',(-0.453375914392,1.485230492873)); +#2582 = CARTESIAN_POINT('',(-0.453101316258,1.491354699262)); +#2583 = CARTESIAN_POINT('',(-0.452835148852,1.497582331191)); +#2584 = CARTESIAN_POINT('',(-0.452577675038,1.503908068843)); +#2585 = CARTESIAN_POINT('',(-0.452329158663,1.510326625436)); +#2586 = CARTESIAN_POINT('',(-0.452089864879,1.516832721336)); +#2587 = CARTESIAN_POINT('',(-0.45186005899,1.523421188484)); +#2588 = CARTESIAN_POINT('',(-0.45164001067,1.530086591242)); +#2589 = CARTESIAN_POINT('',(-0.451429978148,1.536824651872)); +#2590 = CARTESIAN_POINT('',(-0.451231550005,1.543585510205)); +#2591 = CARTESIAN_POINT('',(-0.451044618203,1.550370084676)); +#2592 = CARTESIAN_POINT('',(-0.450869372242,1.557170546082)); +#2593 = CARTESIAN_POINT('',(-0.450705922554,1.563981406757)); +#2594 = CARTESIAN_POINT('',(-0.450604908654,1.568524835583)); +#2595 = CARTESIAN_POINT('',(-0.450556410884,1.57079627426)); +#2596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2597 = ORIENTED_EDGE('',*,*,#2200,.F.); +#2598 = ORIENTED_EDGE('',*,*,#2599,.T.); +#2599 = EDGE_CURVE('',#2201,#2201,#2600,.T.); +#2600 = SURFACE_CURVE('',#2601,(#2606,#2613),.PCURVE_S1.); +#2601 = CIRCLE('',#2602,1.7); +#2602 = AXIS2_PLACEMENT_3D('',#2603,#2604,#2605); +#2603 = CARTESIAN_POINT('',(-38.99050880021,40.886891492734, + -3.885266447075)); +#2604 = DIRECTION('',(-1.,-4.927146840776E-16,-1.527950784018E-16)); +#2605 = DIRECTION('',(4.927146840776E-16,-1.,1.552111978096E-14)); +#2606 = PCURVE('',#819,#2607); +#2607 = DEFINITIONAL_REPRESENTATION('',(#2608),#2612); +#2608 = LINE('',#2609,#2610); +#2609 = CARTESIAN_POINT('',(6.28318530718,-2.010835942201E-11)); +#2610 = VECTOR('',#2611,1.); +#2611 = DIRECTION('',(-1.,0.)); +#2612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2613 = PCURVE('',#2614,#2619); +#2614 = PLANE('',#2615); +#2615 = AXIS2_PLACEMENT_3D('',#2616,#2617,#2618); +#2616 = CARTESIAN_POINT('',(-38.99050880021,40.886891492733, + -14.38526644707)); +#2617 = DIRECTION('',(-1.,-4.927146840776E-16,-1.527950784018E-16)); +#2618 = DIRECTION('',(-4.927146840776E-16,1.,-1.552111978096E-14)); +#2619 = DEFINITIONAL_REPRESENTATION('',(#2620),#2624); +#2620 = CIRCLE('',#2621,1.7); +#2621 = AXIS2_PLACEMENT_2D('',#2622,#2623); +#2622 = CARTESIAN_POINT('',(8.388934997217E-13,-10.49999999999)); +#2623 = DIRECTION('',(-1.,0.)); +#2624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2625 = ADVANCED_FACE('',(#2626),#912,.F.); +#2626 = FACE_BOUND('',#2627,.T.); +#2627 = EDGE_LOOP('',(#2628,#2629,#2652,#2673)); +#2628 = ORIENTED_EDGE('',*,*,#2351,.T.); +#2629 = ORIENTED_EDGE('',*,*,#2630,.F.); +#2630 = EDGE_CURVE('',#2631,#2226,#2633,.T.); +#2631 = VERTEX_POINT('',#2632); +#2632 = CARTESIAN_POINT('',(-36.0562288002,42.53689152307, + 10.164733552925)); +#2633 = SURFACE_CURVE('',#2634,(#2639,#2645),.PCURVE_S1.); +#2634 = CIRCLE('',#2635,44.); +#2635 = AXIS2_PLACEMENT_3D('',#2636,#2637,#2638); +#2636 = CARTESIAN_POINT('',(7.943771349986,42.53689152307, + 10.164733552923)); +#2637 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#2638 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#2639 = PCURVE('',#912,#2640); +#2640 = DEFINITIONAL_REPRESENTATION('',(#2641),#2644); +#2641 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2642,#2643),.UNSPECIFIED.,.F., + .F.,(2,2),(3.14159265359,3.45680319498),.PIECEWISE_BEZIER_KNOTS.); +#2642 = CARTESIAN_POINT('',(-3.14159265359,-10.60000033774)); +#2643 = CARTESIAN_POINT('',(-2.826382111141,-10.60000033774)); +#2644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2645 = PCURVE('',#1367,#2646); +#2646 = DEFINITIONAL_REPRESENTATION('',(#2647),#2651); +#2647 = LINE('',#2648,#2649); +#2648 = CARTESIAN_POINT('',(-3.926990817008,1.570796326795)); +#2649 = VECTOR('',#2650,1.); +#2650 = DIRECTION('',(1.,1.267978815374E-14)); +#2651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2652 = ORIENTED_EDGE('',*,*,#2653,.T.); +#2653 = EDGE_CURVE('',#2631,#22,#2654,.T.); +#2654 = SURFACE_CURVE('',#2655,(#2659,#2666),.PCURVE_S1.); +#2655 = LINE('',#2656,#2657); +#2656 = CARTESIAN_POINT('',(-36.0562288002,31.936891185329, + 10.164733552925)); +#2657 = VECTOR('',#2658,1.); +#2658 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#2659 = PCURVE('',#912,#2660); +#2660 = DEFINITIONAL_REPRESENTATION('',(#2661),#2665); +#2661 = LINE('',#2662,#2663); +#2662 = CARTESIAN_POINT('',(-3.14159265359,3.552713678801E-14)); +#2663 = VECTOR('',#2664,1.); +#2664 = DIRECTION('',(1.346050724443E-16,1.)); +#2665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2666 = PCURVE('',#67,#2667); +#2667 = DEFINITIONAL_REPRESENTATION('',(#2668),#2672); +#2668 = LINE('',#2669,#2670); +#2669 = CARTESIAN_POINT('',(-11.30000033774,2.760014521828E-14)); +#2670 = VECTOR('',#2671,1.); +#2671 = DIRECTION('',(-1.,2.622346822233E-15)); +#2672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2673 = ORIENTED_EDGE('',*,*,#897,.F.); +#2674 = ADVANCED_FACE('',(#2675),#67,.T.); +#2675 = FACE_BOUND('',#2676,.F.); +#2676 = EDGE_LOOP('',(#2677,#2678,#2679,#2702,#2725,#2753,#2781,#2826)); +#2677 = ORIENTED_EDGE('',*,*,#21,.T.); +#2678 = ORIENTED_EDGE('',*,*,#961,.F.); +#2679 = ORIENTED_EDGE('',*,*,#2680,.T.); +#2680 = EDGE_CURVE('',#929,#2681,#2683,.T.); +#2681 = VERTEX_POINT('',#2682); +#2682 = CARTESIAN_POINT('',(-36.05622880011,38.537690372729, + 12.664733552925)); +#2683 = SURFACE_CURVE('',#2684,(#2688,#2695),.PCURVE_S1.); +#2684 = LINE('',#2685,#2686); +#2685 = CARTESIAN_POINT('',(-36.05622880011,38.537690372729, + 10.164733552925)); +#2686 = VECTOR('',#2687,1.); +#2687 = DIRECTION('',(-0.,-8.881784197001E-15,1.)); +#2688 = PCURVE('',#67,#2689); +#2689 = DEFINITIONAL_REPRESENTATION('',(#2690),#2694); +#2690 = LINE('',#2691,#2692); +#2691 = CARTESIAN_POINT('',(-4.699201150341,1.147775489229E-14)); +#2692 = VECTOR('',#2693,1.); +#2693 = DIRECTION('',(-6.439293542722E-15,1.)); +#2694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2695 = PCURVE('',#949,#2696); +#2696 = DEFINITIONAL_REPRESENTATION('',(#2697),#2701); +#2697 = LINE('',#2698,#2699); +#2698 = CARTESIAN_POINT('',(-3.14159257854,-1.7763568394E-14)); +#2699 = VECTOR('',#2700,1.); +#2700 = DIRECTION('',(-0.,1.)); +#2701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2702 = ORIENTED_EDGE('',*,*,#2703,.F.); +#2703 = EDGE_CURVE('',#2704,#2681,#2706,.T.); +#2704 = VERTEX_POINT('',#2705); +#2705 = CARTESIAN_POINT('',(-36.05622880001,43.23689152307, + 12.664733552925)); +#2706 = SURFACE_CURVE('',#2707,(#2711,#2718),.PCURVE_S1.); +#2707 = LINE('',#2708,#2709); +#2708 = CARTESIAN_POINT('',(-36.0562288002,33.937690372729, + 12.664733552925)); +#2709 = VECTOR('',#2710,1.); +#2710 = DIRECTION('',(-1.962809366573E-11,-1.,-2.442490654279E-15)); +#2711 = PCURVE('',#67,#2712); +#2712 = DEFINITIONAL_REPRESENTATION('',(#2713),#2717); +#2713 = LINE('',#2714,#2715); +#2714 = CARTESIAN_POINT('',(-9.299201150341,2.5)); +#2715 = VECTOR('',#2716,1.); +#2716 = DIRECTION('',(-1.,0.)); +#2717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2718 = PCURVE('',#1076,#2719); +#2719 = DEFINITIONAL_REPRESENTATION('',(#2720),#2724); +#2720 = LINE('',#2721,#2722); +#2721 = CARTESIAN_POINT('',(-6.949201120005,-2.46713999986)); +#2722 = VECTOR('',#2723,1.); +#2723 = DIRECTION('',(-1.,1.961006179344E-11)); +#2724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2725 = ORIENTED_EDGE('',*,*,#2726,.F.); +#2726 = EDGE_CURVE('',#2727,#2704,#2729,.T.); +#2727 = VERTEX_POINT('',#2728); +#2728 = CARTESIAN_POINT('',(-36.05622880001,43.23689152307, + 10.664733552925)); +#2729 = SURFACE_CURVE('',#2730,(#2734,#2741),.PCURVE_S1.); +#2730 = LINE('',#2731,#2732); +#2731 = CARTESIAN_POINT('',(-36.05622880001,43.23689152307, + 10.164733552925)); +#2732 = VECTOR('',#2733,1.); +#2733 = DIRECTION('',(-0.,-8.881784197001E-15,1.)); +#2734 = PCURVE('',#67,#2735); +#2735 = DEFINITIONAL_REPRESENTATION('',(#2736),#2740); +#2736 = LINE('',#2737,#2738); +#2737 = CARTESIAN_POINT('',(0.,-0.)); +#2738 = VECTOR('',#2739,1.); +#2739 = DIRECTION('',(-6.439293542722E-15,1.)); +#2740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2741 = PCURVE('',#2742,#2747); +#2742 = CYLINDRICAL_SURFACE('',#2743,2.000000000001); +#2743 = AXIS2_PLACEMENT_3D('',#2744,#2745,#2746); +#2744 = CARTESIAN_POINT('',(-36.05622865001,45.236891523071, + 10.164733552925)); +#2745 = DIRECTION('',(-0.,-8.881784197001E-15,1.)); +#2746 = DIRECTION('',(-1.803187229162E-14,-1.,-8.881784197001E-15)); +#2747 = DEFINITIONAL_REPRESENTATION('',(#2748),#2752); +#2748 = LINE('',#2749,#2750); +#2749 = CARTESIAN_POINT('',(-7.500253218492E-08,1.7763568394E-14)); +#2750 = VECTOR('',#2751,1.); +#2751 = DIRECTION('',(-1.323488980085E-22,1.)); +#2752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2753 = ORIENTED_EDGE('',*,*,#2754,.F.); +#2754 = EDGE_CURVE('',#2755,#2727,#2757,.T.); +#2755 = VERTEX_POINT('',#2756); +#2756 = CARTESIAN_POINT('',(-36.05622880003,42.536893017718, + 10.664733552879)); +#2757 = SURFACE_CURVE('',#2758,(#2762,#2769),.PCURVE_S1.); +#2758 = LINE('',#2759,#2760); +#2759 = CARTESIAN_POINT('',(-36.0562288002,33.937690372729, + 10.664733552925)); +#2760 = VECTOR('',#2761,1.); +#2761 = DIRECTION('',(1.962809366573E-11,1.,2.442490654279E-15)); +#2762 = PCURVE('',#67,#2763); +#2763 = DEFINITIONAL_REPRESENTATION('',(#2764),#2768); +#2764 = LINE('',#2765,#2766); +#2765 = CARTESIAN_POINT('',(-9.299201150341,0.5)); +#2766 = VECTOR('',#2767,1.); +#2767 = DIRECTION('',(1.,-0.)); +#2768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2769 = PCURVE('',#2770,#2775); +#2770 = PLANE('',#2771); +#2771 = AXIS2_PLACEMENT_3D('',#2772,#2773,#2774); +#2772 = CARTESIAN_POINT('',(-38.52336880006,40.886891492734, + 10.664733552925)); +#2773 = DIRECTION('',(1.230623012145E-28,-6.881608909096E-15,1.)); +#2774 = DIRECTION('',(1.803187229162E-14,1.,6.881608909096E-15)); +#2775 = DEFINITIONAL_REPRESENTATION('',(#2776),#2780); +#2776 = LINE('',#2777,#2778); +#2777 = CARTESIAN_POINT('',(-6.949201120005,-2.46713999986)); +#2778 = VECTOR('',#2779,1.); +#2779 = DIRECTION('',(1.,-1.961006179344E-11)); +#2780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2781 = ORIENTED_EDGE('',*,*,#2782,.T.); +#2782 = EDGE_CURVE('',#2755,#2631,#2783,.T.); +#2783 = SURFACE_CURVE('',#2784,(#2789,#2797),.PCURVE_S1.); +#2784 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2785,#2786,#2787,#2788), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.151516595783,3.20122316646), + .PIECEWISE_BEZIER_KNOTS.); +#2785 = CARTESIAN_POINT('',(-36.05622880003,42.536893017718, + 10.664733552879)); +#2786 = CARTESIAN_POINT('',(-36.05622880003,42.536891013701, + 10.497119911943)); +#2787 = CARTESIAN_POINT('',(-36.05622880003,42.53689152307, + 10.330422121846)); +#2788 = CARTESIAN_POINT('',(-36.05622880003,42.53689152307, + 10.164733552923)); +#2789 = PCURVE('',#67,#2790); +#2790 = DEFINITIONAL_REPRESENTATION('',(#2791),#2796); +#2791 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2792,#2793,#2794,#2795), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.151516595783,3.20122316646), + .PIECEWISE_BEZIER_KNOTS.); +#2792 = CARTESIAN_POINT('',(-0.699998505352,0.499999999954)); +#2793 = CARTESIAN_POINT('',(-0.700000509369,0.332386359018)); +#2794 = CARTESIAN_POINT('',(-0.7,0.165688568921)); +#2795 = CARTESIAN_POINT('',(-0.7,-1.998401444325E-12)); +#2796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2797 = PCURVE('',#1367,#2798); +#2798 = DEFINITIONAL_REPRESENTATION('',(#2799),#2825); +#2799 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2800,#2801,#2802,#2803,#2804, + #2805,#2806,#2807,#2808,#2809,#2810,#2811,#2812,#2813,#2814,#2815, + #2816,#2817,#2818,#2819,#2820,#2821,#2822,#2823,#2824), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (3.151516595783,3.153775985359,3.156035374935,3.158294764512, + 3.160554154088,3.162813543664,3.16507293324,3.167332322817, + 3.169591712393,3.171851101969,3.174110491545,3.176369881121, + 3.178629270698,3.180888660274,3.18314804985,3.185407439426, + 3.187666829003,3.189926218579,3.192185608155,3.194444997731, + 3.196704387308,3.198963776884,3.20122316646),.QUASI_UNIFORM_KNOTS.); +#2800 = CARTESIAN_POINT('',(-0.796761310643,1.569744116457)); +#2801 = CARTESIAN_POINT('',(-0.796588178412,1.569776180072)); +#2802 = CARTESIAN_POINT('',(-0.796241997909,1.569838825831)); +#2803 = CARTESIAN_POINT('',(-0.795722980508,1.569928356377)); +#2804 = CARTESIAN_POINT('',(-0.795204217945,1.570013455131)); +#2805 = CARTESIAN_POINT('',(-0.794685711704,1.570094128452)); +#2806 = CARTESIAN_POINT('',(-0.794167463266,1.570170382737)); +#2807 = CARTESIAN_POINT('',(-0.793649474113,1.570242224424)); +#2808 = CARTESIAN_POINT('',(-0.793131745725,1.570309659989)); +#2809 = CARTESIAN_POINT('',(-0.792614279582,1.570372695952)); +#2810 = CARTESIAN_POINT('',(-0.792097077164,1.570431338871)); +#2811 = CARTESIAN_POINT('',(-0.791580139948,1.570485595346)); +#2812 = CARTESIAN_POINT('',(-0.791063469411,1.570535472016)); +#2813 = CARTESIAN_POINT('',(-0.79054706703,1.570580975562)); +#2814 = CARTESIAN_POINT('',(-0.790030934281,1.570622112704)); +#2815 = CARTESIAN_POINT('',(-0.789515072638,1.570658890201)); +#2816 = CARTESIAN_POINT('',(-0.788999483576,1.570691314854)); +#2817 = CARTESIAN_POINT('',(-0.788484168567,1.570719393504)); +#2818 = CARTESIAN_POINT('',(-0.787969129085,1.570743133031)); +#2819 = CARTESIAN_POINT('',(-0.787454366599,1.570762540353)); +#2820 = CARTESIAN_POINT('',(-0.786939882582,1.570777622432)); +#2821 = CARTESIAN_POINT('',(-0.786425678501,1.570788386268)); +#2822 = CARTESIAN_POINT('',(-0.785911755828,1.570794838896)); +#2823 = CARTESIAN_POINT('',(-0.785569329294,1.570796271237)); +#2824 = CARTESIAN_POINT('',(-0.785398163418,1.570796271233)); +#2825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2826 = ORIENTED_EDGE('',*,*,#2653,.T.); +#2827 = ADVANCED_FACE('',(#2828),#949,.F.); +#2828 = FACE_BOUND('',#2829,.T.); +#2829 = EDGE_LOOP('',(#2830,#2831,#2853,#2854)); +#2830 = ORIENTED_EDGE('',*,*,#2680,.T.); +#2831 = ORIENTED_EDGE('',*,*,#2832,.T.); +#2832 = EDGE_CURVE('',#2681,#1061,#2833,.T.); +#2833 = SURFACE_CURVE('',#2834,(#2839,#2846),.PCURVE_S1.); +#2834 = CIRCLE('',#2835,2.); +#2835 = AXIS2_PLACEMENT_3D('',#2836,#2837,#2838); +#2836 = CARTESIAN_POINT('',(-36.05622865001,36.537690372729, + 12.664733552925)); +#2837 = DIRECTION('',(-7.573064690122E-29,-2.442490654279E-15,1.)); +#2838 = DIRECTION('',(-1.803187229162E-14,-1.,-2.442490654279E-15)); +#2839 = PCURVE('',#949,#2840); +#2840 = DEFINITIONAL_REPRESENTATION('',(#2841),#2845); +#2841 = LINE('',#2842,#2843); +#2842 = CARTESIAN_POINT('',(-6.28318530718,2.5)); +#2843 = VECTOR('',#2844,1.); +#2844 = DIRECTION('',(1.,7.916047585513E-15)); +#2845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2846 = PCURVE('',#1076,#2847); +#2847 = DEFINITIONAL_REPRESENTATION('',(#2848),#2852); +#2848 = CIRCLE('',#2849,2.); +#2849 = AXIS2_PLACEMENT_2D('',#2850,#2851); +#2850 = CARTESIAN_POINT('',(-4.349201120005,-2.46714015005)); +#2851 = DIRECTION('',(-1.,-1.700793731102E-42)); +#2852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2853 = ORIENTED_EDGE('',*,*,#1088,.F.); +#2854 = ORIENTED_EDGE('',*,*,#926,.T.); +#2855 = ADVANCED_FACE('',(#2856),#1048,.F.); +#2856 = FACE_BOUND('',#2857,.T.); +#2857 = EDGE_LOOP('',(#2858,#2888,#2921,#2942,#2943,#2944,#2945,#2968, + #3001,#3029,#3062,#3091,#3120,#3148,#3181,#3209,#3242,#3265,#3293, + #3321)); +#2858 = ORIENTED_EDGE('',*,*,#2859,.T.); +#2859 = EDGE_CURVE('',#2860,#2862,#2864,.T.); +#2860 = VERTEX_POINT('',#2861); +#2861 = CARTESIAN_POINT('',(-14.,31.936891185328,-38.93526644707)); +#2862 = VERTEX_POINT('',#2863); +#2863 = CARTESIAN_POINT('',(9.443771350028,31.936891185328, + -38.93526644707)); +#2864 = SURFACE_CURVE('',#2865,(#2869,#2876),.PCURVE_S1.); +#2865 = LINE('',#2866,#2867); +#2866 = CARTESIAN_POINT('',(-6.838695894728,31.936891185328, + -38.93526644707)); +#2867 = VECTOR('',#2868,1.); +#2868 = DIRECTION('',(1.,-4.808493824726E-15,3.904808511482E-15)); +#2869 = PCURVE('',#1048,#2870); +#2870 = DEFINITIONAL_REPRESENTATION('',(#2871),#2875); +#2871 = LINE('',#2872,#2873); +#2872 = CARTESIAN_POINT('',(6.094080590878E-14,5.061687094515)); +#2873 = VECTOR('',#2874,1.); +#2874 = DIRECTION('',(-1.594443181708E-14,-1.)); +#2875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2876 = PCURVE('',#2877,#2882); +#2877 = PLANE('',#2878); +#2878 = AXIS2_PLACEMENT_3D('',#2879,#2880,#2881); +#2879 = CARTESIAN_POINT('',(-11.90038298925,53.038799999999, + -38.93526644707)); +#2880 = DIRECTION('',(2.835232049136E-14,1.749016157657E-15,-1.)); +#2881 = DIRECTION('',(1.,-1.803187229162E-14,2.835232049136E-14)); +#2882 = DEFINITIONAL_REPRESENTATION('',(#2883),#2887); +#2883 = LINE('',#2884,#2885); +#2884 = CARTESIAN_POINT('',(5.061687094522,21.101908814671)); +#2885 = VECTOR('',#2886,1.); +#2886 = DIRECTION('',(1.,-1.322337846689E-14)); +#2887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2888 = ORIENTED_EDGE('',*,*,#2889,.T.); +#2889 = EDGE_CURVE('',#2862,#2890,#2892,.T.); +#2890 = VERTEX_POINT('',#2891); +#2891 = CARTESIAN_POINT('',(10.443771199793,31.936891185328, + -37.93526644707)); +#2892 = SURFACE_CURVE('',#2893,(#2898,#2909),.PCURVE_S1.); +#2893 = CIRCLE('',#2894,1.); +#2894 = AXIS2_PLACEMENT_3D('',#2895,#2896,#2897); +#2895 = CARTESIAN_POINT('',(9.443771350028,31.936891185328, + -37.93526644707)); +#2896 = DIRECTION('',(-5.793923192881E-15,-1.,1.170162602407E-14)); +#2897 = DIRECTION('',(0.707106781187,-1.237122149189E-14,-0.707106781186 + )); +#2898 = PCURVE('',#1048,#2899); +#2899 = DEFINITIONAL_REPRESENTATION('',(#2900),#2908); +#2900 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2901,#2902,#2903,#2904, +#2905,#2906,#2907),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2901 = CARTESIAN_POINT('',(-0.292893218814,-11.92788693142)); +#2902 = CARTESIAN_POINT('',(-1.517638090207,-13.15263180281)); +#2903 = CARTESIAN_POINT('',(-1.965925826289,-11.47959919534)); +#2904 = CARTESIAN_POINT('',(-2.414213562372,-9.806566587867)); +#2905 = CARTESIAN_POINT('',(-0.741180954897,-10.25485432395)); +#2906 = CARTESIAN_POINT('',(0.931851652578,-10.70314206003)); +#2907 = CARTESIAN_POINT('',(-0.292893218814,-11.92788693142)); +#2908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2909 = PCURVE('',#2910,#2915); +#2910 = CYLINDRICAL_SURFACE('',#2911,1.); +#2911 = AXIS2_PLACEMENT_3D('',#2912,#2913,#2914); +#2912 = CARTESIAN_POINT('',(9.443771350028,51.437845900068, + -37.93526644707)); +#2913 = DIRECTION('',(-1.114188106855E-15,-1.,-1.749016157657E-15)); +#2914 = DIRECTION('',(0.707106781187,4.488912196081E-16,-0.707106781186) + ); +#2915 = DEFINITIONAL_REPRESENTATION('',(#2916),#2920); +#2916 = LINE('',#2917,#2918); +#2917 = CARTESIAN_POINT('',(-6.28318530718,19.50095471474)); +#2918 = VECTOR('',#2919,1.); +#2919 = DIRECTION('',(1.,-1.357036664091E-14)); +#2920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2921 = ORIENTED_EDGE('',*,*,#2922,.T.); +#2922 = EDGE_CURVE('',#2890,#1219,#2923,.T.); +#2923 = SURFACE_CURVE('',#2924,(#2928,#2935),.PCURVE_S1.); +#2924 = LINE('',#2925,#2926); +#2925 = CARTESIAN_POINT('',(10.443771199793,31.936891185328, + -28.08272241603)); +#2926 = VECTOR('',#2927,1.); +#2927 = DIRECTION('',(-2.849123778196E-14,1.170162602407E-14,1.)); +#2928 = PCURVE('',#1048,#2929); +#2929 = DEFINITIONAL_REPRESENTATION('',(#2930),#2934); +#2930 = LINE('',#2931,#2932); +#2931 = CARTESIAN_POINT('',(-10.85254403104,-12.22078)); +#2932 = VECTOR('',#2933,1.); +#2933 = DIRECTION('',(-1.,4.053086108756E-14)); +#2934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2935 = PCURVE('',#1234,#2936); +#2936 = DEFINITIONAL_REPRESENTATION('',(#2937),#2941); +#2937 = LINE('',#2938,#2939); +#2938 = CARTESIAN_POINT('',(-5.05254403104,17.900000614809)); +#2939 = VECTOR('',#2940,1.); +#2940 = DIRECTION('',(-1.,8.205821314039E-15)); +#2941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2942 = ORIENTED_EDGE('',*,*,#1246,.F.); +#2943 = ORIENTED_EDGE('',*,*,#1113,.F.); +#2944 = ORIENTED_EDGE('',*,*,#1032,.T.); +#2945 = ORIENTED_EDGE('',*,*,#2946,.T.); +#2946 = EDGE_CURVE('',#1033,#2947,#2949,.T.); +#2947 = VERTEX_POINT('',#2948); +#2948 = CARTESIAN_POINT('',(-39.99050880021,31.93689118533, + 12.664733552925)); +#2949 = SURFACE_CURVE('',#2950,(#2954,#2961),.PCURVE_S1.); +#2950 = LINE('',#2951,#2952); +#2951 = CARTESIAN_POINT('',(-36.0562288002,31.93689118533, + 12.664733552925)); +#2952 = VECTOR('',#2953,1.); +#2953 = DIRECTION('',(-1.,1.353183165904E-14,2.145701662201E-28)); +#2954 = PCURVE('',#1048,#2955); +#2955 = DEFINITIONAL_REPRESENTATION('',(#2956),#2960); +#2956 = LINE('',#2957,#2958); +#2957 = CARTESIAN_POINT('',(-51.59999999999,34.279219999988)); +#2958 = VECTOR('',#2959,1.); +#2959 = DIRECTION('',(1.20396233056E-14,1.)); +#2960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2961 = PCURVE('',#1076,#2962); +#2962 = DEFINITIONAL_REPRESENTATION('',(#2963),#2967); +#2963 = LINE('',#2964,#2965); +#2964 = CARTESIAN_POINT('',(-8.950000307404,-2.46713999986)); +#2965 = VECTOR('',#2966,1.); +#2966 = DIRECTION('',(-4.50004063258E-15,1.)); +#2967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2968 = ORIENTED_EDGE('',*,*,#2969,.T.); +#2969 = EDGE_CURVE('',#2947,#2970,#2972,.T.); +#2970 = VERTEX_POINT('',#2971); +#2971 = CARTESIAN_POINT('',(-40.99050880019,31.936891185329, + 11.664733552925)); +#2972 = SURFACE_CURVE('',#2973,(#2978,#2989),.PCURVE_S1.); +#2973 = CIRCLE('',#2974,1.); +#2974 = AXIS2_PLACEMENT_3D('',#2975,#2976,#2977); +#2975 = CARTESIAN_POINT('',(-39.99050880021,31.936891185329, + 11.664733552925)); +#2976 = DIRECTION('',(-5.793923192881E-15,-1.,1.170162602407E-14)); +#2977 = DIRECTION('',(-0.707106781187,1.237122149189E-14,0.707106781187) + ); +#2978 = PCURVE('',#1048,#2979); +#2979 = DEFINITIONAL_REPRESENTATION('',(#2980),#2988); +#2980 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2981,#2982,#2983,#2984, +#2985,#2986,#2987),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2981 = CARTESIAN_POINT('',(-51.30710678118,38.920606781184)); +#2982 = CARTESIAN_POINT('',(-50.08236190978,40.145351652576)); +#2983 = CARTESIAN_POINT('',(-49.6340741737,38.4723190451)); +#2984 = CARTESIAN_POINT('',(-49.18578643762,36.799286437625)); +#2985 = CARTESIAN_POINT('',(-50.85881904509,37.247574173709)); +#2986 = CARTESIAN_POINT('',(-52.53185165257,37.695861909793)); +#2987 = CARTESIAN_POINT('',(-51.30710678118,38.920606781184)); +#2988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2989 = PCURVE('',#2990,#2995); +#2990 = CYLINDRICAL_SURFACE('',#2991,1.); +#2991 = AXIS2_PLACEMENT_3D('',#2992,#2993,#2994); +#2992 = CARTESIAN_POINT('',(-39.99050880021,43.994641507902, + 11.664733552925)); +#2993 = DIRECTION('',(1.803187229162E-14,1.,6.881608909096E-15)); +#2994 = DIRECTION('',(-0.707106781187,7.884426849799E-15,0.707106781187) + ); +#2995 = DEFINITIONAL_REPRESENTATION('',(#2996),#3000); +#2996 = LINE('',#2997,#2998); +#2997 = CARTESIAN_POINT('',(2.113864638886E-13,-12.05775032257)); +#2998 = VECTOR('',#2999,1.); +#2999 = DIRECTION('',(-1.,-2.261727773485E-14)); +#3000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3001 = ORIENTED_EDGE('',*,*,#3002,.F.); +#3002 = EDGE_CURVE('',#3003,#2970,#3005,.T.); +#3003 = VERTEX_POINT('',#3004); +#3004 = CARTESIAN_POINT('',(-40.99050880019,31.936891185329, + 5.672669341305)); +#3005 = SURFACE_CURVE('',#3006,(#3010,#3017),.PCURVE_S1.); +#3006 = LINE('',#3007,#3008); +#3007 = CARTESIAN_POINT('',(-40.99050880019,31.936891185329, + -30.23526644707)); +#3008 = VECTOR('',#3009,1.); +#3009 = DIRECTION('',(6.938893903225E-17,1.170162602407E-14,1.)); +#3010 = PCURVE('',#1048,#3011); +#3011 = DEFINITIONAL_REPRESENTATION('',(#3012),#3016); +#3012 = LINE('',#3013,#3014); +#3013 = CARTESIAN_POINT('',(-8.7,39.213499999977)); +#3014 = VECTOR('',#3015,1.); +#3015 = DIRECTION('',(-1.,1.197023436657E-14)); +#3016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3017 = PCURVE('',#3018,#3023); +#3018 = PLANE('',#3019); +#3019 = AXIS2_PLACEMENT_3D('',#3020,#3021,#3022); +#3020 = CARTESIAN_POINT('',(-40.99050880021,47.102391523071, + -33.13526644707)); +#3021 = DIRECTION('',(-1.,1.803187229162E-14,-4.848719991821E-15)); +#3022 = DIRECTION('',(1.803187229162E-14,1.,-1.189244560643E-14)); +#3023 = DEFINITIONAL_REPRESENTATION('',(#3024),#3028); +#3024 = LINE('',#3025,#3026); +#3025 = CARTESIAN_POINT('',(-15.16550033774,-2.9)); +#3026 = VECTOR('',#3027,1.); +#3027 = DIRECTION('',(-1.9081958236E-16,-1.)); +#3028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3029 = ORIENTED_EDGE('',*,*,#3030,.T.); +#3030 = EDGE_CURVE('',#3003,#3031,#3033,.T.); +#3031 = VERTEX_POINT('',#3032); +#3032 = CARTESIAN_POINT('',(-36.72762880027,31.936891185328, + -12.29558750517)); +#3033 = SURFACE_CURVE('',#3034,(#3039,#3050),.PCURVE_S1.); +#3034 = CIRCLE('',#3035,40.); +#3035 = AXIS2_PLACEMENT_3D('',#3036,#3037,#3038); +#3036 = CARTESIAN_POINT('',(-0.990508800216,31.93689118533, + 5.672669341305)); +#3037 = DIRECTION('',(-5.793923192881E-15,-1.,1.170162602407E-14)); +#3038 = DIRECTION('',(-0.972992291851,2.936267277274E-15,-0.230837605254 + )); +#3039 = PCURVE('',#1048,#3040); +#3040 = DEFINITIONAL_REPRESENTATION('',(#3041),#3049); +#3041 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3042,#3043,#3044,#3045, +#3046,#3047,#3048),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#3042 = CARTESIAN_POINT('',(-35.37443157821,38.133191674027)); +#3043 = CARTESIAN_POINT('',(32.036451816105,22.140293250134)); +#3044 = CARTESIAN_POINT('',(-15.51924619629,-28.24279504895)); +#3045 = CARTESIAN_POINT('',(-63.07494420868,-78.62588334804)); +#3046 = CARTESIAN_POINT('',(-82.93012959061,-12.24989662506)); +#3047 = CARTESIAN_POINT('',(-102.7853149725,54.126090097919)); +#3048 = CARTESIAN_POINT('',(-35.37443157821,38.133191674027)); +#3049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3050 = PCURVE('',#3051,#3056); +#3051 = CYLINDRICAL_SURFACE('',#3052,40.); +#3052 = AXIS2_PLACEMENT_3D('',#3053,#3054,#3055); +#3053 = CARTESIAN_POINT('',(-0.990508800216,49.836891800137, + 5.672669341304)); +#3054 = DIRECTION('',(1.803187229162E-14,1.,-3.586364494993E-14)); +#3055 = DIRECTION('',(-0.972992291851,9.266194831462E-15,-0.230837605254 + )); +#3056 = DEFINITIONAL_REPRESENTATION('',(#3057),#3061); +#3057 = LINE('',#3058,#3059); +#3058 = CARTESIAN_POINT('',(6.28318530718,-17.90000061481)); +#3059 = VECTOR('',#3060,1.); +#3060 = DIRECTION('',(-1.,1.052369172122E-12)); +#3061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3062 = ORIENTED_EDGE('',*,*,#3063,.F.); +#3063 = EDGE_CURVE('',#3064,#3031,#3066,.T.); +#3064 = VERTEX_POINT('',#3065); +#3065 = CARTESIAN_POINT('',(-24.75963524147,31.936891185328, + -27.65704862529)); +#3066 = SURFACE_CURVE('',#3067,(#3072,#3079),.PCURVE_S1.); +#3067 = CIRCLE('',#3068,50.); +#3068 = AXIS2_PLACEMENT_3D('',#3069,#3070,#3071); +#3069 = CARTESIAN_POINT('',(7.943771199799,31.936891185328, + 10.164733552925)); +#3070 = DIRECTION('',(5.793923192881E-15,1.,-1.170162602407E-14)); +#3071 = DIRECTION('',(-1.,5.793923192881E-15,-2.829680934012E-14)); +#3072 = PCURVE('',#1048,#3073); +#3073 = DEFINITIONAL_REPRESENTATION('',(#3074),#3078); +#3074 = CIRCLE('',#3075,50.); +#3075 = AXIS2_PLACEMENT_2D('',#3076,#3077); +#3076 = CARTESIAN_POINT('',(-49.09999999999,-9.720780000011)); +#3077 = DIRECTION('',(4.033643264572E-14,1.)); +#3078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3079 = PCURVE('',#3080,#3085); +#3080 = CYLINDRICAL_SURFACE('',#3081,50.); +#3081 = AXIS2_PLACEMENT_3D('',#3082,#3083,#3084); +#3082 = CARTESIAN_POINT('',(7.943771199799,49.836891800137, + 10.164733552925)); +#3083 = DIRECTION('',(-0.,-1.,-0.)); +#3084 = DIRECTION('',(-1.,-0.,-2.829680934012E-14)); +#3085 = DEFINITIONAL_REPRESENTATION('',(#3086),#3090); +#3086 = LINE('',#3087,#3088); +#3087 = CARTESIAN_POINT('',(-0.,17.900000614812)); +#3088 = VECTOR('',#3089,1.); +#3089 = DIRECTION('',(-1.,-6.344627044382E-13)); +#3090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3091 = ORIENTED_EDGE('',*,*,#3092,.T.); +#3092 = EDGE_CURVE('',#3064,#3093,#3095,.T.); +#3093 = VERTEX_POINT('',#3094); +#3094 = CARTESIAN_POINT('',(-25.08666930589,31.936891185329, + -28.53526644707)); +#3095 = SURFACE_CURVE('',#3096,(#3101,#3108),.PCURVE_S1.); +#3096 = CIRCLE('',#3097,0.5); +#3097 = AXIS2_PLACEMENT_3D('',#3098,#3099,#3100); +#3098 = CARTESIAN_POINT('',(-25.08666930589,31.936891185328, + -28.03526644707)); +#3099 = DIRECTION('',(5.793923192881E-15,1.,-1.170162602407E-14)); +#3100 = DIRECTION('',(0.937132766358,-9.513227202117E-15,-0.348973033654 + )); +#3101 = PCURVE('',#1048,#3102); +#3102 = DEFINITIONAL_REPRESENTATION('',(#3103),#3107); +#3103 = CIRCLE('',#3104,0.5); +#3104 = AXIS2_PLACEMENT_2D('',#3105,#3106); +#3105 = CARTESIAN_POINT('',(-10.9,23.309660505677)); +#3106 = DIRECTION('',(0.348973033654,-0.937132766358)); +#3107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3108 = PCURVE('',#3109,#3114); +#3109 = CYLINDRICAL_SURFACE('',#3110,0.5); +#3110 = AXIS2_PLACEMENT_3D('',#3111,#3112,#3113); +#3111 = CARTESIAN_POINT('',(-25.08666930589,49.836891800137, + -28.03526644707)); +#3112 = DIRECTION('',(-0.,-1.,-0.)); +#3113 = DIRECTION('',(0.937132766358,-0.,-0.348973033654)); +#3114 = DEFINITIONAL_REPRESENTATION('',(#3115),#3119); +#3115 = LINE('',#3116,#3117); +#3116 = CARTESIAN_POINT('',(6.28318530718,17.900000614809)); +#3117 = VECTOR('',#3118,1.); +#3118 = DIRECTION('',(-1.,2.925678449406E-15)); +#3119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3120 = ORIENTED_EDGE('',*,*,#3121,.F.); +#3121 = EDGE_CURVE('',#3122,#3093,#3124,.T.); +#3122 = VERTEX_POINT('',#3123); +#3123 = CARTESIAN_POINT('',(-27.21550880021,31.936891185329, + -28.53526644707)); +#3124 = SURFACE_CURVE('',#3125,(#3129,#3136),.PCURVE_S1.); +#3125 = LINE('',#3126,#3127); +#3126 = CARTESIAN_POINT('',(-4.008758800206,31.936891185329, + -28.53526644707)); +#3127 = VECTOR('',#3128,1.); +#3128 = DIRECTION('',(1.,-5.793923192881E-15,-7.216449660074E-15)); +#3129 = PCURVE('',#1048,#3130); +#3130 = DEFINITIONAL_REPRESENTATION('',(#3131),#3135); +#3131 = LINE('',#3132,#3133); +#3132 = CARTESIAN_POINT('',(-10.4,2.231749999993)); +#3133 = VECTOR('',#3134,1.); +#3134 = DIRECTION('',(-4.823173645526E-15,-1.)); +#3135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3136 = PCURVE('',#3137,#3142); +#3137 = PLANE('',#3138); +#3138 = AXIS2_PLACEMENT_3D('',#3139,#3140,#3141); +#3139 = CARTESIAN_POINT('',(-6.240508800199,40.886891492732, + -28.53526644707)); +#3140 = DIRECTION('',(-7.216449660074E-15,2.242448613047E-15,-1.)); +#3141 = DIRECTION('',(1.,-1.803187229162E-14,-7.216449660074E-15)); +#3142 = DEFINITIONAL_REPRESENTATION('',(#3143),#3147); +#3143 = LINE('',#3144,#3145); +#3144 = CARTESIAN_POINT('',(2.231749999993,8.950000307403)); +#3145 = VECTOR('',#3146,1.); +#3146 = DIRECTION('',(1.,-1.223794909874E-14)); +#3147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3148 = ORIENTED_EDGE('',*,*,#3149,.T.); +#3149 = EDGE_CURVE('',#3122,#3150,#3152,.T.); +#3150 = VERTEX_POINT('',#3151); +#3151 = CARTESIAN_POINT('',(-28.21550880021,31.936891185328, + -29.53526644707)); +#3152 = SURFACE_CURVE('',#3153,(#3158,#3169),.PCURVE_S1.); +#3153 = CIRCLE('',#3154,1.); +#3154 = AXIS2_PLACEMENT_3D('',#3155,#3156,#3157); +#3155 = CARTESIAN_POINT('',(-27.21550880021,31.936891185329, + -29.53526644707)); +#3156 = DIRECTION('',(-5.793923192881E-15,-1.,1.170162602407E-14)); +#3157 = DIRECTION('',(-0.707106781187,1.237122149189E-14,0.707106781187) + ); +#3158 = PCURVE('',#1048,#3159); +#3159 = DEFINITIONAL_REPRESENTATION('',(#3160),#3168); +#3160 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3161,#3162,#3163,#3164, +#3165,#3166,#3167),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#3161 = CARTESIAN_POINT('',(-10.10710678118,26.145606781184)); +#3162 = CARTESIAN_POINT('',(-8.882361909795,27.370351652575)); +#3163 = CARTESIAN_POINT('',(-8.434074173711,25.6973190451)); +#3164 = CARTESIAN_POINT('',(-7.985786437627,24.024286437624)); +#3165 = CARTESIAN_POINT('',(-9.658819045102,24.472574173708)); +#3166 = CARTESIAN_POINT('',(-11.33185165257,24.920861909792)); +#3167 = CARTESIAN_POINT('',(-10.10710678118,26.145606781184)); +#3168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3169 = PCURVE('',#3170,#3175); +#3170 = CYLINDRICAL_SURFACE('',#3171,1.); +#3171 = AXIS2_PLACEMENT_3D('',#3172,#3173,#3174); +#3172 = CARTESIAN_POINT('',(-27.21550880021,22.321651794431, + -29.53526644707)); +#3173 = DIRECTION('',(-6.189493362287E-15,-1.,-2.242448613047E-15)); +#3174 = DIRECTION('',(-0.707106781187,2.790982107834E-15,0.707106781187) + ); +#3175 = DEFINITIONAL_REPRESENTATION('',(#3176),#3180); +#3176 = LINE('',#3177,#3178); +#3177 = CARTESIAN_POINT('',(-12.56637061435,-9.615239390898)); +#3178 = VECTOR('',#3179,1.); +#3179 = DIRECTION('',(1.,9.046911093941E-15)); +#3180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3181 = ORIENTED_EDGE('',*,*,#3182,.T.); +#3182 = EDGE_CURVE('',#3150,#3183,#3185,.T.); +#3183 = VERTEX_POINT('',#3184); +#3184 = CARTESIAN_POINT('',(-28.21550880021,31.936891185328, + -37.93526644707)); +#3185 = SURFACE_CURVE('',#3186,(#3190,#3197),.PCURVE_S1.); +#3186 = LINE('',#3187,#3188); +#3187 = CARTESIAN_POINT('',(-28.21550880021,31.936891185328, + -34.28526644707)); +#3188 = VECTOR('',#3189,1.); +#3189 = DIRECTION('',(-1.041179101545E-15,-1.170162602407E-14,-1.)); +#3190 = PCURVE('',#1048,#3191); +#3191 = DEFINITIONAL_REPRESENTATION('',(#3192),#3196); +#3192 = LINE('',#3193,#3194); +#3193 = CARTESIAN_POINT('',(-4.65,26.438499999997)); +#3194 = VECTOR('',#3195,1.); +#3195 = DIRECTION('',(1.,-1.099844420406E-14)); +#3196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3197 = PCURVE('',#3198,#3203); +#3198 = PLANE('',#3199); +#3199 = AXIS2_PLACEMENT_3D('',#3200,#3201,#3202); +#3200 = CARTESIAN_POINT('',(-28.21550880021,3.756412096131, + -29.63526644707)); +#3201 = DIRECTION('',(-1.,6.189493362287E-15,-4.667562632694E-15)); +#3202 = DIRECTION('',(6.189493362287E-15,1.,-1.552111978096E-14)); +#3203 = DEFINITIONAL_REPRESENTATION('',(#3204),#3208); +#3204 = LINE('',#3205,#3206); +#3205 = CARTESIAN_POINT('',(28.180479089197,4.65)); +#3206 = VECTOR('',#3207,1.); +#3207 = DIRECTION('',(3.81949375689E-15,1.)); +#3208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3209 = ORIENTED_EDGE('',*,*,#3210,.T.); +#3210 = EDGE_CURVE('',#3183,#3211,#3213,.T.); +#3211 = VERTEX_POINT('',#3212); +#3212 = CARTESIAN_POINT('',(-27.21550880021,31.936891185328, + -38.93526644707)); +#3213 = SURFACE_CURVE('',#3214,(#3219,#3230),.PCURVE_S1.); +#3214 = CIRCLE('',#3215,1.); +#3215 = AXIS2_PLACEMENT_3D('',#3216,#3217,#3218); +#3216 = CARTESIAN_POINT('',(-27.21550880021,31.936891185329, + -37.93526644707)); +#3217 = DIRECTION('',(-5.793923192881E-15,-1.,1.170162602407E-14)); +#3218 = DIRECTION('',(-0.707106781187,-4.177376733169E-15, + -0.707106781187)); +#3219 = PCURVE('',#1048,#3220); +#3220 = DEFINITIONAL_REPRESENTATION('',(#3221),#3229); +#3221 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3222,#3223,#3224,#3225, +#3226,#3227,#3228),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#3222 = CARTESIAN_POINT('',(-0.292893218813,26.145606781184)); +#3223 = CARTESIAN_POINT('',(0.931851652578,24.920861909792)); +#3224 = CARTESIAN_POINT('',(-0.741180954897,24.472574173708)); +#3225 = CARTESIAN_POINT('',(-2.414213562373,24.024286437624)); +#3226 = CARTESIAN_POINT('',(-1.965925826289,25.6973190451)); +#3227 = CARTESIAN_POINT('',(-1.517638090205,27.370351652575)); +#3228 = CARTESIAN_POINT('',(-0.292893218813,26.145606781184)); +#3229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3230 = PCURVE('',#3231,#3236); +#3231 = CYLINDRICAL_SURFACE('',#3232,1.); +#3232 = AXIS2_PLACEMENT_3D('',#3233,#3234,#3235); +#3233 = CARTESIAN_POINT('',(-27.21550880021,28.397606048065, + -37.93526644707)); +#3234 = DIRECTION('',(-6.189493362287E-15,-1.,-1.749016157657E-15)); +#3235 = DIRECTION('',(-0.707106781187,5.613373914066E-15,-0.707106781187 + )); +#3236 = DEFINITIONAL_REPRESENTATION('',(#3237),#3241); +#3237 = LINE('',#3238,#3239); +#3238 = CARTESIAN_POINT('',(-6.28318530718,-3.539285137264)); +#3239 = VECTOR('',#3240,1.); +#3240 = DIRECTION('',(1.,1.357036664091E-14)); +#3241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3242 = ORIENTED_EDGE('',*,*,#3243,.T.); +#3243 = EDGE_CURVE('',#3211,#3244,#3246,.T.); +#3244 = VERTEX_POINT('',#3245); +#3245 = CARTESIAN_POINT('',(-26.,31.936891185328,-38.93526644707)); +#3246 = SURFACE_CURVE('',#3247,(#3251,#3258),.PCURVE_S1.); +#3247 = LINE('',#3248,#3249); +#3248 = CARTESIAN_POINT('',(-6.838695894728,31.936891185328, + -38.93526644707)); +#3249 = VECTOR('',#3250,1.); +#3250 = DIRECTION('',(1.,-4.808493824726E-15,3.904808511482E-15)); +#3251 = PCURVE('',#1048,#3252); +#3252 = DEFINITIONAL_REPRESENTATION('',(#3253),#3257); +#3253 = LINE('',#3254,#3255); +#3254 = CARTESIAN_POINT('',(6.094080590878E-14,5.061687094515)); +#3255 = VECTOR('',#3256,1.); +#3256 = DIRECTION('',(-1.594443181708E-14,-1.)); +#3257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3258 = PCURVE('',#2877,#3259); +#3259 = DEFINITIONAL_REPRESENTATION('',(#3260),#3264); +#3260 = LINE('',#3261,#3262); +#3261 = CARTESIAN_POINT('',(5.061687094522,21.101908814671)); +#3262 = VECTOR('',#3263,1.); +#3263 = DIRECTION('',(1.,-1.322337846689E-14)); +#3264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3265 = ORIENTED_EDGE('',*,*,#3266,.T.); +#3266 = EDGE_CURVE('',#3244,#3267,#3269,.T.); +#3267 = VERTEX_POINT('',#3268); +#3268 = CARTESIAN_POINT('',(-26.,31.936891185329,-33.9353)); +#3269 = SURFACE_CURVE('',#3270,(#3274,#3281),.PCURVE_S1.); +#3270 = LINE('',#3271,#3272); +#3271 = CARTESIAN_POINT('',(-26.,31.936891185329,-38.93528322353)); +#3272 = VECTOR('',#3273,1.); +#3273 = DIRECTION('',(-0.,1.170162602407E-14,1.)); +#3274 = PCURVE('',#1048,#3275); +#3275 = DEFINITIONAL_REPRESENTATION('',(#3276),#3280); +#3276 = LINE('',#3277,#3278); +#3277 = CARTESIAN_POINT('',(1.677646029239E-05,24.222991199787)); +#3278 = VECTOR('',#3279,1.); +#3279 = DIRECTION('',(-1.,1.20396233056E-14)); +#3280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3281 = PCURVE('',#3282,#3287); +#3282 = PLANE('',#3283); +#3283 = AXIS2_PLACEMENT_3D('',#3284,#3285,#3286); +#3284 = CARTESIAN_POINT('',(-26.,33.9738,-38.9353)); +#3285 = DIRECTION('',(1.,-0.,-0.)); +#3286 = DIRECTION('',(0.,0.,-1.)); +#3287 = DEFINITIONAL_REPRESENTATION('',(#3288),#3292); +#3288 = LINE('',#3289,#3290); +#3289 = CARTESIAN_POINT('',(-1.677646999809E-05,-2.036908814671)); +#3290 = VECTOR('',#3291,1.); +#3291 = DIRECTION('',(-1.,1.170162602407E-14)); +#3292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3293 = ORIENTED_EDGE('',*,*,#3294,.F.); +#3294 = EDGE_CURVE('',#3295,#3267,#3297,.T.); +#3295 = VERTEX_POINT('',#3296); +#3296 = CARTESIAN_POINT('',(-14.,31.936891185329,-33.9353)); +#3297 = SURFACE_CURVE('',#3298,(#3302,#3309),.PCURVE_S1.); +#3298 = LINE('',#3299,#3300); +#3299 = CARTESIAN_POINT('',(-13.8885044001,31.936891185329,-33.9353)); +#3300 = VECTOR('',#3301,1.); +#3301 = DIRECTION('',(-1.,5.793923192881E-15,0.)); +#3302 = PCURVE('',#1048,#3303); +#3303 = DEFINITIONAL_REPRESENTATION('',(#3304),#3308); +#3304 = LINE('',#3305,#3306); +#3305 = CARTESIAN_POINT('',(-4.99996644707,12.111495599887)); +#3306 = VECTOR('',#3307,1.); +#3307 = DIRECTION('',(1.20396233056E-14,1.)); +#3308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3309 = PCURVE('',#3310,#3315); +#3310 = PLANE('',#3311); +#3311 = AXIS2_PLACEMENT_3D('',#3312,#3313,#3314); +#3312 = CARTESIAN_POINT('',(-26.,33.9738,-33.9353)); +#3313 = DIRECTION('',(-0.,-0.,1.)); +#3314 = DIRECTION('',(-1.,0.,0.)); +#3315 = DEFINITIONAL_REPRESENTATION('',(#3316),#3320); +#3316 = LINE('',#3317,#3318); +#3317 = CARTESIAN_POINT('',(-12.1114955999,2.036908814671)); +#3318 = VECTOR('',#3319,1.); +#3319 = DIRECTION('',(1.,-5.793923192881E-15)); +#3320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3321 = ORIENTED_EDGE('',*,*,#3322,.F.); +#3322 = EDGE_CURVE('',#2860,#3295,#3323,.T.); +#3323 = SURFACE_CURVE('',#3324,(#3328,#3335),.PCURVE_S1.); +#3324 = LINE('',#3325,#3326); +#3325 = CARTESIAN_POINT('',(-14.,31.936891185329,-38.93528322353)); +#3326 = VECTOR('',#3327,1.); +#3327 = DIRECTION('',(-0.,1.170162602407E-14,1.)); +#3328 = PCURVE('',#1048,#3329); +#3329 = DEFINITIONAL_REPRESENTATION('',(#3330),#3334); +#3330 = LINE('',#3331,#3332); +#3331 = CARTESIAN_POINT('',(1.677646014792E-05,12.222991199787)); +#3332 = VECTOR('',#3333,1.); +#3333 = DIRECTION('',(-1.,1.20396233056E-14)); +#3334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3335 = PCURVE('',#3336,#3341); +#3336 = PLANE('',#3337); +#3337 = AXIS2_PLACEMENT_3D('',#3338,#3339,#3340); +#3338 = CARTESIAN_POINT('',(-14.,33.9738,-38.9353)); +#3339 = DIRECTION('',(1.,-0.,-0.)); +#3340 = DIRECTION('',(0.,0.,-1.)); +#3341 = DEFINITIONAL_REPRESENTATION('',(#3342),#3346); +#3342 = LINE('',#3343,#3344); +#3343 = CARTESIAN_POINT('',(-1.677646999809E-05,-2.036908814671)); +#3344 = VECTOR('',#3345,1.); +#3345 = DIRECTION('',(-1.,1.170162602407E-14)); +#3346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3347 = ADVANCED_FACE('',(#3348),#1076,.T.); +#3348 = FACE_BOUND('',#3349,.F.); +#3349 = EDGE_LOOP('',(#3350,#3373,#3401,#3429,#3451,#3452,#3453,#3454)); +#3350 = ORIENTED_EDGE('',*,*,#3351,.F.); +#3351 = EDGE_CURVE('',#3352,#2947,#3354,.T.); +#3352 = VERTEX_POINT('',#3353); +#3353 = CARTESIAN_POINT('',(-39.99050880021,49.836891800139, + 12.664733552925)); +#3354 = SURFACE_CURVE('',#3355,(#3359,#3366),.PCURVE_S1.); +#3355 = LINE('',#3356,#3357); +#3356 = CARTESIAN_POINT('',(-39.99050880021,43.994641507902, + 12.664733552925)); +#3357 = VECTOR('',#3358,1.); +#3358 = DIRECTION('',(-1.803187229162E-14,-1.,-6.881608909096E-15)); +#3359 = PCURVE('',#1076,#3360); +#3360 = DEFINITIONAL_REPRESENTATION('',(#3361),#3365); +#3361 = LINE('',#3362,#3363); +#3362 = CARTESIAN_POINT('',(3.107750015168,1.46714000015)); +#3363 = VECTOR('',#3364,1.); +#3364 = DIRECTION('',(-1.,-1.700793731102E-42)); +#3365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3366 = PCURVE('',#2990,#3367); +#3367 = DEFINITIONAL_REPRESENTATION('',(#3368),#3372); +#3368 = LINE('',#3369,#3370); +#3369 = CARTESIAN_POINT('',(-5.497787143783,7.105427357601E-15)); +#3370 = VECTOR('',#3371,1.); +#3371 = DIRECTION('',(-1.488567132727E-16,-1.)); +#3372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3373 = ORIENTED_EDGE('',*,*,#3374,.T.); +#3374 = EDGE_CURVE('',#3352,#3375,#3377,.T.); +#3375 = VERTEX_POINT('',#3376); +#3376 = CARTESIAN_POINT('',(-36.0562288002,49.836891800138, + 12.664733552925)); +#3377 = SURFACE_CURVE('',#3378,(#3382,#3389),.PCURVE_S1.); +#3378 = LINE('',#3379,#3380); +#3379 = CARTESIAN_POINT('',(-40.99050880019,49.836891800139, + 12.664733552925)); +#3380 = VECTOR('',#3381,1.); +#3381 = DIRECTION('',(1.,-9.768259148829E-14,-1.798602863904E-28)); +#3382 = PCURVE('',#1076,#3383); +#3383 = DEFINITIONAL_REPRESENTATION('',(#3384),#3388); +#3384 = LINE('',#3385,#3386); +#3385 = CARTESIAN_POINT('',(8.950000307405,2.46714000013)); +#3386 = VECTOR('',#3387,1.); +#3387 = DIRECTION('',(-7.965071919667E-14,-1.)); +#3388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3389 = PCURVE('',#3390,#3395); +#3390 = PLANE('',#3391); +#3391 = AXIS2_PLACEMENT_3D('',#3392,#3393,#3394); +#3392 = CARTESIAN_POINT('',(-14.99032290156,49.836891800137, + -5.840266447075)); +#3393 = DIRECTION('',(3.228414021756E-15,-1.,2.369891979405E-14)); +#3394 = DIRECTION('',(-1.,-3.228414021756E-15,5.822437111774E-16)); +#3395 = DEFINITIONAL_REPRESENTATION('',(#3396),#3400); +#3396 = LINE('',#3397,#3398); +#3397 = CARTESIAN_POINT('',(26.00018589863,-18.505)); +#3398 = VECTOR('',#3399,1.); +#3399 = DIRECTION('',(-1.,-5.822437111748E-16)); +#3400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3401 = ORIENTED_EDGE('',*,*,#3402,.T.); +#3402 = EDGE_CURVE('',#3375,#3403,#3405,.T.); +#3403 = VERTEX_POINT('',#3404); +#3404 = CARTESIAN_POINT('',(-36.05622879994,47.236891523071, + 12.664733552925)); +#3405 = SURFACE_CURVE('',#3406,(#3410,#3417),.PCURVE_S1.); +#3406 = LINE('',#3407,#3408); +#3407 = CARTESIAN_POINT('',(-36.0562288002,49.836891800138, + 12.664733552925)); +#3408 = VECTOR('',#3409,1.); +#3409 = DIRECTION('',(1.363706273624E-10,-1.,1.998400829008E-15)); +#3410 = PCURVE('',#1076,#3411); +#3411 = DEFINITIONAL_REPRESENTATION('',(#3412),#3416); +#3412 = LINE('',#3413,#3414); +#3413 = CARTESIAN_POINT('',(8.950000307404,-2.46713999986)); +#3414 = VECTOR('',#3415,1.); +#3415 = DIRECTION('',(-1.,-1.363886592347E-10)); +#3416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3417 = PCURVE('',#3418,#3423); +#3418 = PLANE('',#3419); +#3419 = AXIS2_PLACEMENT_3D('',#3420,#3421,#3422); +#3420 = CARTESIAN_POINT('',(-36.0562288002,49.836891800138, + 10.164733552925)); +#3421 = DIRECTION('',(1.,1.363706273624E-10,1.211214483043E-24)); +#3422 = DIRECTION('',(-1.363706273624E-10,1.,-1.998400829008E-15)); +#3423 = DEFINITIONAL_REPRESENTATION('',(#3424),#3428); +#3424 = LINE('',#3425,#3426); +#3425 = CARTESIAN_POINT('',(-4.99600207252E-15,2.5)); +#3426 = VECTOR('',#3427,1.); +#3427 = DIRECTION('',(-1.,0.)); +#3428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3429 = ORIENTED_EDGE('',*,*,#3430,.T.); +#3430 = EDGE_CURVE('',#3403,#2704,#3431,.T.); +#3431 = SURFACE_CURVE('',#3432,(#3437,#3444),.PCURVE_S1.); +#3432 = CIRCLE('',#3433,2.000000000001); +#3433 = AXIS2_PLACEMENT_3D('',#3434,#3435,#3436); +#3434 = CARTESIAN_POINT('',(-36.05622865001,45.236891523071, + 12.664733552925)); +#3435 = DIRECTION('',(-7.573064690122E-29,-2.442490654279E-15,1.)); +#3436 = DIRECTION('',(-1.803187229162E-14,-1.,-2.442490654279E-15)); +#3437 = PCURVE('',#1076,#3438); +#3438 = DEFINITIONAL_REPRESENTATION('',(#3439),#3443); +#3439 = CIRCLE('',#3440,2.000000000001); +#3440 = AXIS2_PLACEMENT_2D('',#3441,#3442); +#3441 = CARTESIAN_POINT('',(4.350000030337,-2.46714015005)); +#3442 = DIRECTION('',(-1.,-1.700793731102E-42)); +#3443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3444 = PCURVE('',#2742,#3445); +#3445 = DEFINITIONAL_REPRESENTATION('',(#3446),#3450); +#3446 = LINE('',#3447,#3448); +#3447 = CARTESIAN_POINT('',(-6.28318530718,2.5)); +#3448 = VECTOR('',#3449,1.); +#3449 = DIRECTION('',(1.,7.916047585075E-15)); +#3450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3451 = ORIENTED_EDGE('',*,*,#2703,.T.); +#3452 = ORIENTED_EDGE('',*,*,#2832,.T.); +#3453 = ORIENTED_EDGE('',*,*,#1060,.T.); +#3454 = ORIENTED_EDGE('',*,*,#2946,.T.); +#3455 = ADVANCED_FACE('',(#3456),#1206,.F.); +#3456 = FACE_BOUND('',#3457,.T.); +#3457 = EDGE_LOOP('',(#3458,#3459,#3460,#3461)); +#3458 = ORIENTED_EDGE('',*,*,#1480,.T.); +#3459 = ORIENTED_EDGE('',*,*,#1271,.T.); +#3460 = ORIENTED_EDGE('',*,*,#1190,.F.); +#3461 = ORIENTED_EDGE('',*,*,#3462,.F.); +#3462 = EDGE_CURVE('',#1458,#1191,#3463,.T.); +#3463 = SURFACE_CURVE('',#3464,(#3469,#3476),.PCURVE_S1.); +#3464 = CIRCLE('',#3465,2.); +#3465 = AXIS2_PLACEMENT_3D('',#3466,#3467,#3468); +#3466 = CARTESIAN_POINT('',(10.443771349935,36.537690372728, + -33.83526644707)); +#3467 = DIRECTION('',(-1.,-4.927146840776E-16,-1.38917290594E-16)); +#3468 = DIRECTION('',(-4.927146840776E-16,1.,-1.552111978096E-14)); +#3469 = PCURVE('',#1206,#3470); +#3470 = DEFINITIONAL_REPRESENTATION('',(#3471),#3475); +#3471 = LINE('',#3472,#3473); +#3472 = CARTESIAN_POINT('',(-6.28318530718,-0.5)); +#3473 = VECTOR('',#3474,1.); +#3474 = DIRECTION('',(1.,-1.130863886742E-15)); +#3475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3476 = PCURVE('',#1234,#3477); +#3477 = DEFINITIONAL_REPRESENTATION('',(#3478),#3482); +#3478 = CIRCLE('',#3479,2.); +#3479 = AXIS2_PLACEMENT_2D('',#3480,#3481); +#3480 = CARTESIAN_POINT('',(0.7,13.299201427409)); +#3481 = DIRECTION('',(-4.38632755715E-15,-1.)); +#3482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3483 = ADVANCED_FACE('',(#3484),#1234,.F.); +#3484 = FACE_BOUND('',#3485,.F.); +#3485 = EDGE_LOOP('',(#3486,#3509,#3510,#3511,#3512,#3513,#3537,#3565)); +#3486 = ORIENTED_EDGE('',*,*,#3487,.F.); +#3487 = EDGE_CURVE('',#2890,#3488,#3490,.T.); +#3488 = VERTEX_POINT('',#3489); +#3489 = CARTESIAN_POINT('',(10.443771350028,49.836891800137, + -37.93526644707)); +#3490 = SURFACE_CURVE('',#3491,(#3495,#3502),.PCURVE_S1.); +#3491 = LINE('',#3492,#3493); +#3492 = CARTESIAN_POINT('',(10.443771350028,51.437845900068, + -37.93526644707)); +#3493 = VECTOR('',#3494,1.); +#3494 = DIRECTION('',(1.114188106855E-15,1.,1.749016157657E-15)); +#3495 = PCURVE('',#1234,#3496); +#3496 = DEFINITIONAL_REPRESENTATION('',(#3497),#3501); +#3497 = LINE('',#3498,#3499); +#3498 = CARTESIAN_POINT('',(4.8,-1.600954099931)); +#3499 = VECTOR('',#3500,1.); +#3500 = DIRECTION('',(-2.165646349577E-14,-1.)); +#3501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3502 = PCURVE('',#2910,#3503); +#3503 = DEFINITIONAL_REPRESENTATION('',(#3504),#3508); +#3504 = LINE('',#3505,#3506); +#3505 = CARTESIAN_POINT('',(0.785398163398,-7.105427357601E-15)); +#3506 = VECTOR('',#3507,1.); +#3507 = DIRECTION('',(2.480945221212E-16,-1.)); +#3508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3509 = ORIENTED_EDGE('',*,*,#2922,.T.); +#3510 = ORIENTED_EDGE('',*,*,#1218,.T.); +#3511 = ORIENTED_EDGE('',*,*,#3462,.F.); +#3512 = ORIENTED_EDGE('',*,*,#1457,.T.); +#3513 = ORIENTED_EDGE('',*,*,#3514,.F.); +#3514 = EDGE_CURVE('',#3515,#1430,#3517,.T.); +#3515 = VERTEX_POINT('',#3516); +#3516 = CARTESIAN_POINT('',(10.443771349935,47.236891523071, + -33.83526644707)); +#3517 = SURFACE_CURVE('',#3518,(#3523,#3530),.PCURVE_S1.); +#3518 = CIRCLE('',#3519,2.); +#3519 = AXIS2_PLACEMENT_3D('',#3520,#3521,#3522); +#3520 = CARTESIAN_POINT('',(10.443771349935,45.236891523071, + -33.83526644707)); +#3521 = DIRECTION('',(-1.,-4.927146840776E-16,-1.38917290594E-16)); +#3522 = DIRECTION('',(-4.927146840776E-16,1.,-1.552111978096E-14)); +#3523 = PCURVE('',#1234,#3524); +#3524 = DEFINITIONAL_REPRESENTATION('',(#3525),#3529); +#3525 = CIRCLE('',#3526,2.); +#3526 = AXIS2_PLACEMENT_2D('',#3527,#3528); +#3527 = CARTESIAN_POINT('',(0.7,4.600000277066)); +#3528 = DIRECTION('',(-4.38632755715E-15,-1.)); +#3529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3530 = PCURVE('',#1445,#3531); +#3531 = DEFINITIONAL_REPRESENTATION('',(#3532),#3536); +#3532 = LINE('',#3533,#3534); +#3533 = CARTESIAN_POINT('',(-6.28318530718,-0.5)); +#3534 = VECTOR('',#3535,1.); +#3535 = DIRECTION('',(1.,-1.130863886743E-15)); +#3536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3537 = ORIENTED_EDGE('',*,*,#3538,.T.); +#3538 = EDGE_CURVE('',#3515,#3539,#3541,.T.); +#3539 = VERTEX_POINT('',#3540); +#3540 = CARTESIAN_POINT('',(10.443771350024,49.836891800137, + -33.83526644707)); +#3541 = SURFACE_CURVE('',#3542,(#3546,#3553),.PCURVE_S1.); +#3542 = LINE('',#3543,#3544); +#3543 = CARTESIAN_POINT('',(10.443771349935,42.636891523071, + -33.83526644707)); +#3544 = VECTOR('',#3545,1.); +#3545 = DIRECTION('',(-4.927146840778E-16,1.,1.070789408929E-12)); +#3546 = PCURVE('',#1234,#3547); +#3547 = DEFINITIONAL_REPRESENTATION('',(#3548),#3552); +#3548 = LINE('',#3549,#3550); +#3549 = CARTESIAN_POINT('',(0.7,7.200000277066)); +#3550 = VECTOR('',#3551,1.); +#3551 = DIRECTION('',(-1.090696856267E-12,-1.)); +#3552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3553 = PCURVE('',#3554,#3559); +#3554 = PLANE('',#3555); +#3555 = AXIS2_PLACEMENT_3D('',#3556,#3557,#3558); +#3556 = CARTESIAN_POINT('',(7.943771350024,47.836891523071, + -33.83526644707)); +#3557 = DIRECTION('',(-9.969802761134E-13,1.79856167953E-16,1.)); +#3558 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#3559 = DEFINITIONAL_REPRESENTATION('',(#3560),#3564); +#3560 = LINE('',#3561,#3562); +#3561 = CARTESIAN_POINT('',(5.2,2.499999999911)); +#3562 = VECTOR('',#3563,1.); +#3563 = DIRECTION('',(-1.,8.538512733719E-16)); +#3564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3565 = ORIENTED_EDGE('',*,*,#3566,.T.); +#3566 = EDGE_CURVE('',#3539,#3488,#3567,.T.); +#3567 = SURFACE_CURVE('',#3568,(#3572,#3579),.PCURVE_S1.); +#3568 = LINE('',#3569,#3570); +#3569 = CARTESIAN_POINT('',(10.44377135001,49.836891800137, + -19.48776644706)); +#3570 = VECTOR('',#3571,1.); +#3571 = DIRECTION('',(9.96160529544E-13,-2.369891979405E-14,-1.)); +#3572 = PCURVE('',#1234,#3573); +#3573 = DEFINITIONAL_REPRESENTATION('',(#3574),#3578); +#3574 = LINE('',#3575,#3576); +#3575 = CARTESIAN_POINT('',(-13.64750000001,2.716868875471E-13)); +#3576 = VECTOR('',#3577,1.); +#3577 = DIRECTION('',(1.,3.79147245594E-15)); +#3578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3579 = PCURVE('',#3390,#3580); +#3580 = DEFINITIONAL_REPRESENTATION('',(#3581),#3585); +#3581 = LINE('',#3582,#3583); +#3582 = CARTESIAN_POINT('',(-25.43409425157,13.647499999985)); +#3583 = VECTOR('',#3584,1.); +#3584 = DIRECTION('',(-9.967427732552E-13,1.)); +#3585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3586 = ADVANCED_FACE('',(#3587),#1367,.F.); +#3587 = FACE_BOUND('',#3588,.T.); +#3588 = EDGE_LOOP('',(#3589,#3590,#3591,#3592,#3593,#3594,#3595,#3596, + #3693,#3740,#3768,#3815,#3910)); +#3589 = ORIENTED_EDGE('',*,*,#2630,.T.); +#3590 = ORIENTED_EDGE('',*,*,#2225,.T.); +#3591 = ORIENTED_EDGE('',*,*,#2477,.T.); +#3592 = ORIENTED_EDGE('',*,*,#2049,.T.); +#3593 = ORIENTED_EDGE('',*,*,#1704,.T.); +#3594 = ORIENTED_EDGE('',*,*,#1506,.T.); +#3595 = ORIENTED_EDGE('',*,*,#1349,.T.); +#3596 = ORIENTED_EDGE('',*,*,#3597,.F.); +#3597 = EDGE_CURVE('',#3598,#1350,#3600,.T.); +#3598 = VERTEX_POINT('',#3599); +#3599 = CARTESIAN_POINT('',(8.44377135003,47.936890028581, + -33.83526644707)); +#3600 = SURFACE_CURVE('',#3601,(#3620,#3671),.PCURVE_S1.); +#3601 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3602,#3603,#3604,#3605,#3606, + #3607,#3608,#3609,#3610,#3611,#3612,#3613,#3614,#3615,#3616,#3617, + #3618,#3619),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),( + 1.199903170781,1.299592518761,1.399562301036,1.499528308304, + 1.599491384496,1.699454460687,1.799420467955,1.899390250231, + 1.99907959821),.UNSPECIFIED.); +#3602 = CARTESIAN_POINT('',(8.44377135003,47.936890028581, + -33.83526644707)); +#3603 = CARTESIAN_POINT('',(8.44377135003,47.936540071964, + -34.16789724363)); +#3604 = CARTESIAN_POINT('',(8.44377135003,47.858517677692, + -34.55875439292)); +#3605 = CARTESIAN_POINT('',(8.443771350031,47.603837879084, + -35.17362751724)); +#3606 = CARTESIAN_POINT('',(8.443771350031,47.381683889734, + -35.50611950647)); +#3607 = CARTESIAN_POINT('',(8.443771350032,46.910439060534, + -35.97738102771)); +#3608 = CARTESIAN_POINT('',(8.443771350032,46.577968713766, + -36.19954022798)); +#3609 = CARTESIAN_POINT('',(8.443771350032,45.962270411293, + -36.45457927604)); +#3610 = CARTESIAN_POINT('',(8.443771350032,45.570101777043, + -36.53258971083)); +#3611 = CARTESIAN_POINT('',(8.443771350032,44.9036812691,-36.53258971083 + )); +#3612 = CARTESIAN_POINT('',(8.443771350032,44.51151263485, + -36.45457927604)); +#3613 = CARTESIAN_POINT('',(8.443771350032,43.895814332377, + -36.19954022798)); +#3614 = CARTESIAN_POINT('',(8.443771350032,43.563343985608, + -35.97738102771)); +#3615 = CARTESIAN_POINT('',(8.443771350031,43.092099156408, + -35.50611950647)); +#3616 = CARTESIAN_POINT('',(8.443771350031,42.869945167059, + -35.17362751724)); +#3617 = CARTESIAN_POINT('',(8.44377135003,42.615265368451, + -34.55875439292)); +#3618 = CARTESIAN_POINT('',(8.44377135003,42.537242974178, + -34.16789724363)); +#3619 = CARTESIAN_POINT('',(8.44377135003,42.536893017561, + -33.83526644707)); +#3620 = PCURVE('',#1367,#3621); +#3621 = DEFINITIONAL_REPRESENTATION('',(#3622),#3670); +#3622 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3623,#3624,#3625,#3626,#3627, + #3628,#3629,#3630,#3631,#3632,#3633,#3634,#3635,#3636,#3637,#3638, + #3639,#3640,#3641,#3642,#3643,#3644,#3645,#3646,#3647,#3648,#3649, + #3650,#3651,#3652,#3653,#3654,#3655,#3656,#3657,#3658,#3659,#3660, + #3661,#3662,#3663,#3664,#3665,#3666,#3667,#3668,#3669), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(1.199903170781, + 1.218066271405,1.236229372028,1.254392472652,1.272555573275, + 1.290718673898,1.308881774522,1.327044875145,1.345207975769, + 1.363371076392,1.381534177015,1.399697277639,1.417860378262, + 1.436023478885,1.454186579509,1.472349680132,1.490512780756, + 1.508675881379,1.526838982002,1.545002082626,1.563165183249, + 1.581328283873,1.599491384496,1.617654485119,1.635817585743, + 1.653980686366,1.672143786989,1.690306887613,1.708469988236, + 1.72663308886,1.744796189483,1.762959290106,1.78112239073, + 1.799285491353,1.817448591977,1.8356116926,1.853774793223, + 1.871937893847,1.89010099447,1.908264095093,1.926427195717, + 1.94459029634,1.962753396964,1.980916497587,1.99907959821), + .UNSPECIFIED.); +#3623 = CARTESIAN_POINT('',(0.796761310642,-1.569744172015)); +#3624 = CARTESIAN_POINT('',(0.796745656948,-1.547311100154)); +#3625 = CARTESIAN_POINT('',(0.796713494445,-1.500965358089)); +#3626 = CARTESIAN_POINT('',(0.796664019126,-1.428623907296)); +#3627 = CARTESIAN_POINT('',(0.796614648991,-1.355015076057)); +#3628 = CARTESIAN_POINT('',(0.7965667104,-1.28190607192)); +#3629 = CARTESIAN_POINT('',(0.796521295386,-1.210712579219)); +#3630 = CARTESIAN_POINT('',(0.796480183875,-1.143894021244)); +#3631 = CARTESIAN_POINT('',(0.796438223858,-1.072613417559)); +#3632 = CARTESIAN_POINT('',(0.796397128665,-0.999463818934)); +#3633 = CARTESIAN_POINT('',(0.796357807896,-0.925930258603)); +#3634 = CARTESIAN_POINT('',(0.796321133712,-0.853375169351)); +#3635 = CARTESIAN_POINT('',(0.796288759597,-0.784903034489)); +#3636 = CARTESIAN_POINT('',(0.796259105228,-0.716329894128)); +#3637 = CARTESIAN_POINT('',(0.796230423058,-0.643754615694)); +#3638 = CARTESIAN_POINT('',(0.796204016679,-0.57021098027)); +#3639 = CARTESIAN_POINT('',(0.796180380609,-0.497074429235)); +#3640 = CARTESIAN_POINT('',(0.796160127909,-0.425852057429)); +#3641 = CARTESIAN_POINT('',(0.796144158384,-0.359030082035)); +#3642 = CARTESIAN_POINT('',(0.79613045417,-0.2877777664)); +#3643 = CARTESIAN_POINT('',(0.796119435697,-0.214632823092)); +#3644 = CARTESIAN_POINT('',(0.796111267723,-0.141092125197)); +#3645 = CARTESIAN_POINT('',(0.796106186938,-6.852460139911E-02)); +#3646 = CARTESIAN_POINT('',(0.796104415618,1.738456483282E-13)); +#3647 = CARTESIAN_POINT('',(0.796106186938,6.85246013995E-02)); +#3648 = CARTESIAN_POINT('',(0.796111267723,0.141092125197)); +#3649 = CARTESIAN_POINT('',(0.796119435697,0.214632823092)); +#3650 = CARTESIAN_POINT('',(0.79613045417,0.2877777664)); +#3651 = CARTESIAN_POINT('',(0.796144158384,0.359030082035)); +#3652 = CARTESIAN_POINT('',(0.796160127909,0.42585205743)); +#3653 = CARTESIAN_POINT('',(0.796180380609,0.497074429235)); +#3654 = CARTESIAN_POINT('',(0.796204016679,0.57021098027)); +#3655 = CARTESIAN_POINT('',(0.796230423058,0.643754615694)); +#3656 = CARTESIAN_POINT('',(0.796259105228,0.716329894128)); +#3657 = CARTESIAN_POINT('',(0.796288759597,0.784903034489)); +#3658 = CARTESIAN_POINT('',(0.796321133712,0.853375169351)); +#3659 = CARTESIAN_POINT('',(0.796357807896,0.925930258604)); +#3660 = CARTESIAN_POINT('',(0.796397128665,0.999463818934)); +#3661 = CARTESIAN_POINT('',(0.796438223858,1.072613417559)); +#3662 = CARTESIAN_POINT('',(0.796480183875,1.143894021244)); +#3663 = CARTESIAN_POINT('',(0.796521295386,1.210712579219)); +#3664 = CARTESIAN_POINT('',(0.7965667104,1.281906071921)); +#3665 = CARTESIAN_POINT('',(0.796614648991,1.355015076058)); +#3666 = CARTESIAN_POINT('',(0.796664019126,1.428623907296)); +#3667 = CARTESIAN_POINT('',(0.796713494445,1.500965358089)); +#3668 = CARTESIAN_POINT('',(0.796745656948,1.547311100154)); +#3669 = CARTESIAN_POINT('',(0.796761310642,1.569744172015)); +#3670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3671 = PCURVE('',#1417,#3672); +#3672 = DEFINITIONAL_REPRESENTATION('',(#3673),#3692); +#3673 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3674,#3675,#3676,#3677,#3678, + #3679,#3680,#3681,#3682,#3683,#3684,#3685,#3686,#3687,#3688,#3689, + #3690,#3691),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),( + 1.199903170781,1.299592518761,1.399562301036,1.499528308304, + 1.599491384496,1.699454460687,1.799420467955,1.899390250231, + 1.99907959821),.UNSPECIFIED.); +#3674 = CARTESIAN_POINT('',(-2.69999850551,-1.3)); +#3675 = CARTESIAN_POINT('',(-2.699648548893,-0.96736920344)); +#3676 = CARTESIAN_POINT('',(-2.621626154621,-0.57651205415)); +#3677 = CARTESIAN_POINT('',(-2.366946356013,3.836107016996E-02)); +#3678 = CARTESIAN_POINT('',(-2.144792366663,0.3708530594)); +#3679 = CARTESIAN_POINT('',(-1.673547537463,0.84211458064)); +#3680 = CARTESIAN_POINT('',(-1.341077190695,1.06427378091)); +#3681 = CARTESIAN_POINT('',(-0.725378888222,1.31931282897)); +#3682 = CARTESIAN_POINT('',(-0.333210253972,1.39732326376)); +#3683 = CARTESIAN_POINT('',(0.333210253971,1.39732326376)); +#3684 = CARTESIAN_POINT('',(0.725378888221,1.31931282897)); +#3685 = CARTESIAN_POINT('',(1.341077190694,1.06427378091)); +#3686 = CARTESIAN_POINT('',(1.673547537463,0.84211458064)); +#3687 = CARTESIAN_POINT('',(2.144792366663,0.3708530594)); +#3688 = CARTESIAN_POINT('',(2.366946356012,3.836107017004E-02)); +#3689 = CARTESIAN_POINT('',(2.62162615462,-0.57651205415)); +#3690 = CARTESIAN_POINT('',(2.699648548893,-0.96736920344)); +#3691 = CARTESIAN_POINT('',(2.69999850551,-1.3)); +#3692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3693 = ORIENTED_EDGE('',*,*,#3694,.T.); +#3694 = EDGE_CURVE('',#3598,#3695,#3697,.T.); +#3695 = VERTEX_POINT('',#3696); +#3696 = CARTESIAN_POINT('',(7.943771350024,47.936891523071, + -33.83526644707)); +#3697 = SURFACE_CURVE('',#3698,(#3703,#3732),.PCURVE_S1.); +#3698 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3699,#3700,#3701,#3702), + .UNSPECIFIED.,.F.,.F.,(4,4),(-4.962475373052E-02,0.), + .PIECEWISE_BEZIER_KNOTS.); +#3699 = CARTESIAN_POINT('',(8.44377135003,47.936890028581, + -33.83526644707)); +#3700 = CARTESIAN_POINT('',(8.275891285041,47.936892035678, + -33.83526644707)); +#3701 = CARTESIAN_POINT('',(8.109187195798,47.936891523071, + -33.83526644707)); +#3702 = CARTESIAN_POINT('',(7.94377135003,47.936891523071, + -33.83526644707)); +#3703 = PCURVE('',#1367,#3704); +#3704 = DEFINITIONAL_REPRESENTATION('',(#3705),#3731); +#3705 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3706,#3707,#3708,#3709,#3710, + #3711,#3712,#3713,#3714,#3715,#3716,#3717,#3718,#3719,#3720,#3721, + #3722,#3723,#3724,#3725,#3726,#3727,#3728,#3729,#3730), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (-4.962475373052E-02,-4.736908310641E-02,-4.511341248229E-02, + -4.285774185818E-02,-4.060207123406E-02,-3.834640060995E-02, + -3.609072998583E-02,-3.383505936172E-02,-3.15793887376E-02, + -2.932371811349E-02,-2.706804748937E-02,-2.481237686526E-02, + -2.255670624115E-02,-2.030103561703E-02,-1.804536499292E-02, + -1.57896943688E-02,-1.353402374469E-02,-1.127835312057E-02, + -9.022682496458E-03,-6.767011872344E-03,-4.511341248229E-03, + -2.255670624115E-03,0.),.UNSPECIFIED.); +#3706 = CARTESIAN_POINT('',(0.796761310642,-1.569744172017)); +#3707 = CARTESIAN_POINT('',(0.796587903215,-1.569776286598)); +#3708 = CARTESIAN_POINT('',(0.796241196739,-1.569839025102)); +#3709 = CARTESIAN_POINT('',(0.795721463883,-1.569928669037)); +#3710 = CARTESIAN_POINT('',(0.795202059617,-1.570013857292)); +#3711 = CARTESIAN_POINT('',(0.794682985668,-1.57009459807)); +#3712 = CARTESIAN_POINT('',(0.794164243764,-1.570170899618)); +#3713 = CARTESIAN_POINT('',(0.793645835631,-1.57024277023)); +#3714 = CARTESIAN_POINT('',(0.793127762994,-1.570310218247)); +#3715 = CARTESIAN_POINT('',(0.792610027577,-1.570373252057)); +#3716 = CARTESIAN_POINT('',(0.792092631104,-1.570431880093)); +#3717 = CARTESIAN_POINT('',(0.791575575296,-1.570486110836)); +#3718 = CARTESIAN_POINT('',(0.791058861875,-1.570535952813)); +#3719 = CARTESIAN_POINT('',(0.79054249256,-1.570581414597)); +#3720 = CARTESIAN_POINT('',(0.790026469071,-1.570622504805)); +#3721 = CARTESIAN_POINT('',(0.789510793125,-1.570659232104)); +#3722 = CARTESIAN_POINT('',(0.788995466439,-1.570691605204)); +#3723 = CARTESIAN_POINT('',(0.788480490728,-1.570719632861)); +#3724 = CARTESIAN_POINT('',(0.787965867707,-1.570743323877)); +#3725 = CARTESIAN_POINT('',(0.78745159909,-1.570762687101)); +#3726 = CARTESIAN_POINT('',(0.786937686589,-1.570777731425)); +#3727 = CARTESIAN_POINT('',(0.786424131914,-1.570788465788)); +#3728 = CARTESIAN_POINT('',(0.785910936777,-1.570794899171)); +#3729 = CARTESIAN_POINT('',(0.785569047516,-1.570796326801)); +#3730 = CARTESIAN_POINT('',(0.785398163378,-1.570796326797)); +#3731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3732 = PCURVE('',#3554,#3733); +#3733 = DEFINITIONAL_REPRESENTATION('',(#3734),#3739); +#3734 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3735,#3736,#3737,#3738), + .UNSPECIFIED.,.F.,.F.,(4,4),(-4.962475373052E-02,0.), + .PIECEWISE_BEZIER_KNOTS.); +#3735 = CARTESIAN_POINT('',(-9.999850551E-02,0.500000000006)); +#3736 = CARTESIAN_POINT('',(-0.100000512607,0.332119935017)); +#3737 = CARTESIAN_POINT('',(-0.1,0.165415845774)); +#3738 = CARTESIAN_POINT('',(-0.1,5.999645225074E-12)); +#3739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3740 = ORIENTED_EDGE('',*,*,#3741,.T.); +#3741 = EDGE_CURVE('',#3695,#3742,#3744,.T.); +#3742 = VERTEX_POINT('',#3743); +#3743 = CARTESIAN_POINT('',(-36.0562288002,47.93689152307, + 10.164733552925)); +#3744 = SURFACE_CURVE('',#3745,(#3750,#3757),.PCURVE_S1.); +#3745 = CIRCLE('',#3746,44.); +#3746 = AXIS2_PLACEMENT_3D('',#3747,#3748,#3749); +#3747 = CARTESIAN_POINT('',(7.943771349986,47.93689152307, + 10.164733552923)); +#3748 = DIRECTION('',(-1.346565956382E-15,1.,-1.798561679543E-16)); +#3749 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#3750 = PCURVE('',#1367,#3751); +#3751 = DEFINITIONAL_REPRESENTATION('',(#3752),#3756); +#3752 = LINE('',#3753,#3754); +#3753 = CARTESIAN_POINT('',(2.356194490172,-1.570796326795)); +#3754 = VECTOR('',#3755,1.); +#3755 = DIRECTION('',(-1.,-1.187407081079E-14)); +#3756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3757 = PCURVE('',#3758,#3763); +#3758 = CYLINDRICAL_SURFACE('',#3759,44.); +#3759 = AXIS2_PLACEMENT_3D('',#3760,#3761,#3762); +#3760 = CARTESIAN_POINT('',(7.943771199795,31.936891185329, + 10.164733552925)); +#3761 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#3762 = DIRECTION('',(1.,1.346565956382E-15,2.831068712793E-14)); +#3763 = DEFINITIONAL_REPRESENTATION('',(#3764),#3767); +#3764 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3765,#3766),.UNSPECIFIED.,.F., + .F.,(2,2),(1.570796326794,3.14159265359),.PIECEWISE_BEZIER_KNOTS.); +#3765 = CARTESIAN_POINT('',(-1.570796323381,-16.00000033774)); +#3766 = CARTESIAN_POINT('',(-3.14159265359,-16.00000033774)); +#3767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3768 = ORIENTED_EDGE('',*,*,#3769,.T.); +#3769 = EDGE_CURVE('',#3742,#3770,#3772,.T.); +#3770 = VERTEX_POINT('',#3771); +#3771 = CARTESIAN_POINT('',(-36.05622879994,47.936890028423, + 10.664733552879)); +#3772 = SURFACE_CURVE('',#3773,(#3778,#3807),.PCURVE_S1.); +#3773 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3774,#3775,#3776,#3777), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,4.970657067684E-02), + .PIECEWISE_BEZIER_KNOTS.); +#3774 = CARTESIAN_POINT('',(-36.05622879994,47.93689152307, + 10.164733552923)); +#3775 = CARTESIAN_POINT('',(-36.05622879994,47.93689152307, + 10.330422121846)); +#3776 = CARTESIAN_POINT('',(-36.05622879994,47.93689203244, + 10.497119911943)); +#3777 = CARTESIAN_POINT('',(-36.05622879994,47.936890028423, + 10.664733552879)); +#3778 = PCURVE('',#1367,#3779); +#3779 = DEFINITIONAL_REPRESENTATION('',(#3780),#3806); +#3780 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3781,#3782,#3783,#3784,#3785, + #3786,#3787,#3788,#3789,#3790,#3791,#3792,#3793,#3794,#3795,#3796, + #3797,#3798,#3799,#3800,#3801,#3802,#3803,#3804,#3805), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4), + (0.,2.25938957622E-03,4.51877915244E-03,6.77816872866E-03, + 9.03755830488E-03,1.12969478811E-02,1.355633745732E-02, + 1.581572703354E-02,1.807511660976E-02,2.033450618598E-02, + 2.25938957622E-02,2.485328533842E-02,2.711267491464E-02, + 2.937206449086E-02,3.163145406708E-02,3.38908436433E-02, + 3.615023321952E-02,3.840962279574E-02,4.066901237196E-02, + 4.292840194818E-02,4.51877915244E-02,4.744718110062E-02, + 4.970657067684E-02),.QUASI_UNIFORM_KNOTS.); +#3781 = CARTESIAN_POINT('',(-0.785398163418,-1.570796271267)); +#3782 = CARTESIAN_POINT('',(-0.785569329294,-1.57079627127)); +#3783 = CARTESIAN_POINT('',(-0.785911755828,-1.570794838929)); +#3784 = CARTESIAN_POINT('',(-0.786425678501,-1.570788386301)); +#3785 = CARTESIAN_POINT('',(-0.786939882582,-1.570777622466)); +#3786 = CARTESIAN_POINT('',(-0.787454366599,-1.570762540387)); +#3787 = CARTESIAN_POINT('',(-0.787969129085,-1.570743133064)); +#3788 = CARTESIAN_POINT('',(-0.788484168567,-1.570719393538)); +#3789 = CARTESIAN_POINT('',(-0.788999483576,-1.570691314888)); +#3790 = CARTESIAN_POINT('',(-0.789515072638,-1.570658890234)); +#3791 = CARTESIAN_POINT('',(-0.790030934281,-1.570622112737)); +#3792 = CARTESIAN_POINT('',(-0.79054706703,-1.570580975595)); +#3793 = CARTESIAN_POINT('',(-0.791063469411,-1.570535472049)); +#3794 = CARTESIAN_POINT('',(-0.791580139948,-1.570485595379)); +#3795 = CARTESIAN_POINT('',(-0.792097077164,-1.570431338904)); +#3796 = CARTESIAN_POINT('',(-0.792614279583,-1.570372695985)); +#3797 = CARTESIAN_POINT('',(-0.793131745725,-1.570309660022)); +#3798 = CARTESIAN_POINT('',(-0.793649474113,-1.570242224457)); +#3799 = CARTESIAN_POINT('',(-0.794167463266,-1.570170382771)); +#3800 = CARTESIAN_POINT('',(-0.794685711704,-1.570094128486)); +#3801 = CARTESIAN_POINT('',(-0.795204217945,-1.570013455164)); +#3802 = CARTESIAN_POINT('',(-0.795722980508,-1.56992835641)); +#3803 = CARTESIAN_POINT('',(-0.796241997909,-1.569838825865)); +#3804 = CARTESIAN_POINT('',(-0.796588178412,-1.569776180105)); +#3805 = CARTESIAN_POINT('',(-0.796761310643,-1.56974411649)); +#3806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3807 = PCURVE('',#3418,#3808); +#3808 = DEFINITIONAL_REPRESENTATION('',(#3809),#3814); +#3809 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3810,#3811,#3812,#3813), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,4.970657067684E-02), + .PIECEWISE_BEZIER_KNOTS.); +#3810 = CARTESIAN_POINT('',(-1.900000277068,-2.003730514843E-12)); +#3811 = CARTESIAN_POINT('',(-1.900000277068,0.165688568921)); +#3812 = CARTESIAN_POINT('',(-1.899999767698,0.332386359018)); +#3813 = CARTESIAN_POINT('',(-1.900001771715,0.499999999954)); +#3814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3815 = ORIENTED_EDGE('',*,*,#3816,.F.); +#3816 = EDGE_CURVE('',#2755,#3770,#3817,.T.); +#3817 = SURFACE_CURVE('',#3818,(#3837,#3888),.PCURVE_S1.); +#3818 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3819,#3820,#3821,#3822,#3823, + #3824,#3825,#3826,#3827,#3828,#3829,#3830,#3831,#3832,#3833,#3834, + #3835,#3836),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),( + 1.199903185768,1.299592518761,1.399562301036,1.499528308304, + 1.599491384496,1.699454460687,1.799420467955,1.899390250231, + 1.999079583232),.UNSPECIFIED.); +#3819 = CARTESIAN_POINT('',(-36.05622880003,42.536893017718, + 10.664733552879)); +#3820 = CARTESIAN_POINT('',(-36.3888595641,42.537242992781, + 10.664733552879)); +#3821 = CARTESIAN_POINT('',(-36.77971664201,42.615265387567, + 10.664733552878)); +#3822 = CARTESIAN_POINT('',(-37.39458972018,42.869945167058, + 10.664733552878)); +#3823 = CARTESIAN_POINT('',(-37.72708170941,43.092099156407, + 10.664733552878)); +#3824 = CARTESIAN_POINT('',(-38.19834323065,43.563343985607, + 10.664733552877)); +#3825 = CARTESIAN_POINT('',(-38.42050243092,43.895814332376, + 10.664733552877)); +#3826 = CARTESIAN_POINT('',(-38.67554147897,44.511512634849, + 10.664733552877)); +#3827 = CARTESIAN_POINT('',(-38.75355191377,44.903681269099, + 10.664733552877)); +#3828 = CARTESIAN_POINT('',(-38.75355191377,45.570101777042, + 10.664733552877)); +#3829 = CARTESIAN_POINT('',(-38.67554147897,45.962270411292, + 10.664733552877)); +#3830 = CARTESIAN_POINT('',(-38.42050243092,46.577968713765, + 10.664733552877)); +#3831 = CARTESIAN_POINT('',(-38.19834323065,46.910439060533, + 10.664733552877)); +#3832 = CARTESIAN_POINT('',(-37.72708170941,47.381683889734, + 10.664733552878)); +#3833 = CARTESIAN_POINT('',(-37.39458972018,47.603837879083, + 10.664733552878)); +#3834 = CARTESIAN_POINT('',(-36.77971664199,47.858517658585, + 10.664733552879)); +#3835 = CARTESIAN_POINT('',(-36.38885956403,47.936540053371, + 10.664733552879)); +#3836 = CARTESIAN_POINT('',(-36.05622879994,47.936890028423, + 10.664733552879)); +#3837 = PCURVE('',#1367,#3838); +#3838 = DEFINITIONAL_REPRESENTATION('',(#3839),#3887); +#3839 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3840,#3841,#3842,#3843,#3844, + #3845,#3846,#3847,#3848,#3849,#3850,#3851,#3852,#3853,#3854,#3855, + #3856,#3857,#3858,#3859,#3860,#3861,#3862,#3863,#3864,#3865,#3866, + #3867,#3868,#3869,#3870,#3871,#3872,#3873,#3874,#3875,#3876,#3877, + #3878,#3879,#3880,#3881,#3882,#3883,#3884,#3885,#3886), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(1.199903185768, + 1.21806628571,1.236229385653,1.254392485595,1.272555585537, + 1.29071868548,1.308881785422,1.327044885365,1.345207985307, + 1.363371085249,1.381534185192,1.399697285134,1.417860385076, + 1.436023485019,1.454186584961,1.472349684903,1.490512784846, + 1.508675884788,1.526838984731,1.545002084673,1.563165184615, + 1.581328284558,1.5994913845,1.617654484442,1.635817584385, + 1.653980684327,1.672143784269,1.690306884212,1.708469984154, + 1.726633084097,1.744796184039,1.762959283981,1.781122383924, + 1.799285483866,1.817448583808,1.835611683751,1.853774783693, + 1.871937883635,1.890100983578,1.90826408352,1.926427183463, + 1.944590283405,1.962753383347,1.98091648329,1.999079583232), + .QUASI_UNIFORM_KNOTS.); +#3840 = CARTESIAN_POINT('',(-0.796761310643,1.569744116457)); +#3841 = CARTESIAN_POINT('',(-0.796745656948,1.547311044252)); +#3842 = CARTESIAN_POINT('',(-0.796713494445,1.500965302037)); +#3843 = CARTESIAN_POINT('',(-0.796664019127,1.428623852441)); +#3844 = CARTESIAN_POINT('',(-0.796614648995,1.355015023758)); +#3845 = CARTESIAN_POINT('',(-0.796566710407,1.281906023018)); +#3846 = CARTESIAN_POINT('',(-0.796521295397,1.210712535577)); +#3847 = CARTESIAN_POINT('',(-0.796480183889,1.14389398)); +#3848 = CARTESIAN_POINT('',(-0.796438223873,1.072613376651)); +#3849 = CARTESIAN_POINT('',(-0.796397128682,0.999463780263)); +#3850 = CARTESIAN_POINT('',(-0.796357807917,0.925930222968)); +#3851 = CARTESIAN_POINT('',(-0.796321133736,0.853375137124)); +#3852 = CARTESIAN_POINT('',(-0.796288759624,0.784903007641)); +#3853 = CARTESIAN_POINT('',(-0.796259105256,0.716329867108)); +#3854 = CARTESIAN_POINT('',(-0.796230423088,0.643754591017)); +#3855 = CARTESIAN_POINT('',(-0.796204016711,0.570210958157)); +#3856 = CARTESIAN_POINT('',(-0.796180380642,0.497074410198)); +#3857 = CARTESIAN_POINT('',(-0.796160127943,0.425852042027)); +#3858 = CARTESIAN_POINT('',(-0.79614415842,0.359030069119)); +#3859 = CARTESIAN_POINT('',(-0.796130454207,0.28777775545)); +#3860 = CARTESIAN_POINT('',(-0.796119435735,0.214632814797)); +#3861 = CARTESIAN_POINT('',(-0.796111267762,0.141092119697)); +#3862 = CARTESIAN_POINT('',(-0.796106186977,6.852459876688E-02)); +#3863 = CARTESIAN_POINT('',(-0.796104415657,-1.512034941697E-11)); +#3864 = CARTESIAN_POINT('',(-0.796106186977,-6.852459880029E-02)); +#3865 = CARTESIAN_POINT('',(-0.796111267762,-0.141092119731)); +#3866 = CARTESIAN_POINT('',(-0.796119435735,-0.214632814832)); +#3867 = CARTESIAN_POINT('',(-0.796130454207,-0.287777755485)); +#3868 = CARTESIAN_POINT('',(-0.79614415842,-0.359030069153)); +#3869 = CARTESIAN_POINT('',(-0.796160127943,-0.42585204206)); +#3870 = CARTESIAN_POINT('',(-0.796180380642,-0.497074410234)); +#3871 = CARTESIAN_POINT('',(-0.796204016711,-0.570210958193)); +#3872 = CARTESIAN_POINT('',(-0.796230423088,-0.643754591053)); +#3873 = CARTESIAN_POINT('',(-0.796259105256,-0.716329867143)); +#3874 = CARTESIAN_POINT('',(-0.796288759624,-0.784903007673)); +#3875 = CARTESIAN_POINT('',(-0.796321133736,-0.853375137159)); +#3876 = CARTESIAN_POINT('',(-0.796357807917,-0.925930223002)); +#3877 = CARTESIAN_POINT('',(-0.796397128682,-0.999463780298)); +#3878 = CARTESIAN_POINT('',(-0.796438223873,-1.072613376684)); +#3879 = CARTESIAN_POINT('',(-0.796480183889,-1.14389398003)); +#3880 = CARTESIAN_POINT('',(-0.796521295397,-1.210712535607)); +#3881 = CARTESIAN_POINT('',(-0.796566710407,-1.28190602305)); +#3882 = CARTESIAN_POINT('',(-0.796614648995,-1.355015023791)); +#3883 = CARTESIAN_POINT('',(-0.796664019127,-1.428623852475)); +#3884 = CARTESIAN_POINT('',(-0.796713494445,-1.500965302071)); +#3885 = CARTESIAN_POINT('',(-0.796745656948,-1.547311044286)); +#3886 = CARTESIAN_POINT('',(-0.796761310643,-1.56974411649)); +#3887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3888 = PCURVE('',#2770,#3889); +#3889 = DEFINITIONAL_REPRESENTATION('',(#3890),#3909); +#3890 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3891,#3892,#3893,#3894,#3895, + #3896,#3897,#3898,#3899,#3900,#3901,#3902,#3903,#3904,#3905,#3906, + #3907,#3908),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,4),( + 1.199903185768,1.299592518761,1.399562301036,1.499528308304, + 1.599491384496,1.699454460687,1.799420467955,1.899390250231, + 1.999079583232),.UNSPECIFIED.); +#3891 = CARTESIAN_POINT('',(1.650001524984,-2.46714000003)); +#3892 = CARTESIAN_POINT('',(1.650351500047,-2.13450923596)); +#3893 = CARTESIAN_POINT('',(1.728373894833,-1.74365215805)); +#3894 = CARTESIAN_POINT('',(1.983053674324,-1.12877907988)); +#3895 = CARTESIAN_POINT('',(2.205207663673,-0.79628709065)); +#3896 = CARTESIAN_POINT('',(2.676452492873,-0.32502556941)); +#3897 = CARTESIAN_POINT('',(3.008922839642,-0.10286636914)); +#3898 = CARTESIAN_POINT('',(3.624621142115,0.15217267891)); +#3899 = CARTESIAN_POINT('',(4.016789776365,0.23018311371)); +#3900 = CARTESIAN_POINT('',(4.683210284308,0.23018311371)); +#3901 = CARTESIAN_POINT('',(5.075378918558,0.15217267891)); +#3902 = CARTESIAN_POINT('',(5.691077221031,-0.10286636914)); +#3903 = CARTESIAN_POINT('',(6.023547567799,-0.32502556941)); +#3904 = CARTESIAN_POINT('',(6.494792397,-0.79628709065)); +#3905 = CARTESIAN_POINT('',(6.716946386349,-1.12877907988)); +#3906 = CARTESIAN_POINT('',(6.971626165851,-1.74365215807)); +#3907 = CARTESIAN_POINT('',(7.049648560637,-2.13450923603)); +#3908 = CARTESIAN_POINT('',(7.049998535689,-2.46714000012)); +#3909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3910 = ORIENTED_EDGE('',*,*,#2782,.T.); +#3911 = ADVANCED_FACE('',(#3912),#1417,.F.); +#3912 = FACE_BOUND('',#3913,.F.); +#3913 = EDGE_LOOP('',(#3914,#3942,#3943,#3944)); +#3914 = ORIENTED_EDGE('',*,*,#3915,.T.); +#3915 = EDGE_CURVE('',#3916,#1402,#3918,.T.); +#3916 = VERTEX_POINT('',#3917); +#3917 = CARTESIAN_POINT('',(8.443771349935,47.236891523071, + -33.83526644707)); +#3918 = SURFACE_CURVE('',#3919,(#3924,#3935),.PCURVE_S1.); +#3919 = CIRCLE('',#3920,2.); +#3920 = AXIS2_PLACEMENT_3D('',#3921,#3922,#3923); +#3921 = CARTESIAN_POINT('',(8.443771349935,45.236891523071, + -33.83526644707)); +#3922 = DIRECTION('',(-1.,-4.927146840776E-16,-1.38917290594E-16)); +#3923 = DIRECTION('',(-4.927146840776E-16,1.,-1.552111978096E-14)); +#3924 = PCURVE('',#1417,#3925); +#3925 = DEFINITIONAL_REPRESENTATION('',(#3926),#3934); +#3926 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3927,#3928,#3929,#3930, +#3931,#3932,#3933),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#3927 = CARTESIAN_POINT('',(-2.,-1.3)); +#3928 = CARTESIAN_POINT('',(-2.,2.164101615138)); +#3929 = CARTESIAN_POINT('',(1.,0.432050807569)); +#3930 = CARTESIAN_POINT('',(4.,-1.3)); +#3931 = CARTESIAN_POINT('',(1.,-3.032050807569)); +#3932 = CARTESIAN_POINT('',(-2.,-4.764101615138)); +#3933 = CARTESIAN_POINT('',(-2.,-1.3)); +#3934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3935 = PCURVE('',#1445,#3936); +#3936 = DEFINITIONAL_REPRESENTATION('',(#3937),#3941); +#3937 = LINE('',#3938,#3939); +#3938 = CARTESIAN_POINT('',(-6.28318530718,1.5)); +#3939 = VECTOR('',#3940,1.); +#3940 = DIRECTION('',(1.,-1.130863886743E-15)); +#3941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3942 = ORIENTED_EDGE('',*,*,#1401,.T.); +#3943 = ORIENTED_EDGE('',*,*,#3597,.F.); +#3944 = ORIENTED_EDGE('',*,*,#3945,.T.); +#3945 = EDGE_CURVE('',#3598,#3916,#3946,.T.); +#3946 = SURFACE_CURVE('',#3947,(#3951,#3958),.PCURVE_S1.); +#3947 = LINE('',#3948,#3949); +#3948 = CARTESIAN_POINT('',(8.443771349935,42.636891523071, + -33.83526644707)); +#3949 = VECTOR('',#3950,1.); +#3950 = DIRECTION('',(4.927146840778E-16,-1.,-1.070789408929E-12)); +#3951 = PCURVE('',#1417,#3952); +#3952 = DEFINITIONAL_REPRESENTATION('',(#3953),#3957); +#3953 = LINE('',#3954,#3955); +#3954 = CARTESIAN_POINT('',(2.6,-1.3)); +#3955 = VECTOR('',#3956,1.); +#3956 = DIRECTION('',(1.,1.08631052871E-12)); +#3957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3958 = PCURVE('',#3554,#3959); +#3959 = DEFINITIONAL_REPRESENTATION('',(#3960),#3964); +#3960 = LINE('',#3961,#3962); +#3961 = CARTESIAN_POINT('',(5.2,0.499999999911)); +#3962 = VECTOR('',#3963,1.); +#3963 = DIRECTION('',(1.,-8.538512733719E-16)); +#3964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3965 = ADVANCED_FACE('',(#3966),#1445,.F.); +#3966 = FACE_BOUND('',#3967,.T.); +#3967 = EDGE_LOOP('',(#3968,#3989,#3990,#3991)); +#3968 = ORIENTED_EDGE('',*,*,#3969,.T.); +#3969 = EDGE_CURVE('',#3515,#3916,#3970,.T.); +#3970 = SURFACE_CURVE('',#3971,(#3975,#3982),.PCURVE_S1.); +#3971 = LINE('',#3972,#3973); +#3972 = CARTESIAN_POINT('',(9.943771349935,47.236891523071, + -33.83526644707)); +#3973 = VECTOR('',#3974,1.); +#3974 = DIRECTION('',(-1.,-0.,-0.)); +#3975 = PCURVE('',#1445,#3976); +#3976 = DEFINITIONAL_REPRESENTATION('',(#3977),#3981); +#3977 = LINE('',#3978,#3979); +#3978 = CARTESIAN_POINT('',(-6.28318530718,-6.927791673661E-14)); +#3979 = VECTOR('',#3980,1.); +#3980 = DIRECTION('',(-0.,1.)); +#3981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3982 = PCURVE('',#3554,#3983); +#3983 = DEFINITIONAL_REPRESENTATION('',(#3984),#3988); +#3984 = LINE('',#3985,#3986); +#3985 = CARTESIAN_POINT('',(0.6,1.999999999911)); +#3986 = VECTOR('',#3987,1.); +#3987 = DIRECTION('',(-1.346565956382E-15,-1.)); +#3988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3989 = ORIENTED_EDGE('',*,*,#3915,.T.); +#3990 = ORIENTED_EDGE('',*,*,#1429,.F.); +#3991 = ORIENTED_EDGE('',*,*,#3514,.F.); +#3992 = ADVANCED_FACE('',(#3993,#4028),#2029,.F.); +#3993 = FACE_BOUND('',#3994,.F.); +#3994 = EDGE_LOOP('',(#3995)); +#3995 = ORIENTED_EDGE('',*,*,#3996,.F.); +#3996 = EDGE_CURVE('',#3997,#3997,#3999,.T.); +#3997 = VERTEX_POINT('',#3998); +#3998 = CARTESIAN_POINT('',(-2.982837108069,40.886891492733, + -36.73526644706)); +#3999 = SURFACE_CURVE('',#4000,(#4005,#4016),.PCURVE_S1.); +#4000 = CIRCLE('',#4001,3.05); +#4001 = AXIS2_PLACEMENT_3D('',#4002,#4003,#4004); +#4002 = CARTESIAN_POINT('',(-6.032837108069,40.886891492734, + -36.73526644706)); +#4003 = DIRECTION('',(6.626431603857E-29,2.442490654279E-15,-1.)); +#4004 = DIRECTION('',(-1.,1.803187229162E-14,-2.222163648714E-29)); +#4005 = PCURVE('',#2029,#4006); +#4006 = DEFINITIONAL_REPRESENTATION('',(#4007),#4015); +#4007 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4008,#4009,#4010,#4011, +#4012,#4013,#4014),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#4008 = CARTESIAN_POINT('',(-3.05,-1.655422253E-43)); +#4009 = CARTESIAN_POINT('',(-3.05,5.282754963085)); +#4010 = CARTESIAN_POINT('',(1.525,2.641377481543)); +#4011 = CARTESIAN_POINT('',(6.1,7.470345474799E-16)); +#4012 = CARTESIAN_POINT('',(1.525,-2.641377481543)); +#4013 = CARTESIAN_POINT('',(-3.05,-5.282754963085)); +#4014 = CARTESIAN_POINT('',(-3.05,-1.655422253E-43)); +#4015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4016 = PCURVE('',#4017,#4022); +#4017 = CYLINDRICAL_SURFACE('',#4018,3.05); +#4018 = AXIS2_PLACEMENT_3D('',#4019,#4020,#4021); +#4019 = CARTESIAN_POINT('',(-6.032837108069,40.886891492734, + -37.83526644706)); +#4020 = DIRECTION('',(-6.626431603857E-29,-2.442490654279E-15,1.)); +#4021 = DIRECTION('',(-1.,1.803187229162E-14,-2.222163648714E-29)); +#4022 = DEFINITIONAL_REPRESENTATION('',(#4023),#4027); +#4023 = LINE('',#4024,#4025); +#4024 = CARTESIAN_POINT('',(4.138911435803E-13,1.1)); +#4025 = VECTOR('',#4026,1.); +#4026 = DIRECTION('',(-1.,0.)); +#4027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4028 = FACE_BOUND('',#4029,.F.); +#4029 = EDGE_LOOP('',(#4030)); +#4030 = ORIENTED_EDGE('',*,*,#2014,.T.); +#4031 = ADVANCED_FACE('',(#4032,#4086),#2614,.T.); +#4032 = FACE_BOUND('',#4033,.F.); +#4033 = EDGE_LOOP('',(#4034,#4059)); +#4034 = ORIENTED_EDGE('',*,*,#4035,.F.); +#4035 = EDGE_CURVE('',#4036,#4038,#4040,.T.); +#4036 = VERTEX_POINT('',#4037); +#4037 = CARTESIAN_POINT('',(-38.99050880019,41.726845618778, + -6.817326655553)); +#4038 = VERTEX_POINT('',#4039); +#4039 = CARTESIAN_POINT('',(-38.99050880019,40.046937366689, + -6.817326655553)); +#4040 = SURFACE_CURVE('',#4041,(#4045,#4052),.PCURVE_S1.); +#4041 = LINE('',#4042,#4043); +#4042 = CARTESIAN_POINT('',(-38.99050880021,49.836891800137, + -6.817326655503)); +#4043 = VECTOR('',#4044,1.); +#4044 = DIRECTION('',(-1.803187229162E-14,-1.,3.586364494993E-14)); +#4045 = PCURVE('',#2614,#4046); +#4046 = DEFINITIONAL_REPRESENTATION('',(#4047),#4051); +#4047 = LINE('',#4048,#4049); +#4048 = CARTESIAN_POINT('',(8.950000307404,-7.567939791567)); +#4049 = VECTOR('',#4050,1.); +#4050 = DIRECTION('',(-1.,-2.034252516897E-14)); +#4051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4052 = PCURVE('',#3051,#4053); +#4053 = DEFINITIONAL_REPRESENTATION('',(#4054),#4058); +#4054 = LINE('',#4055,#4056); +#4055 = CARTESIAN_POINT('',(-8.462197923909E-02,-4.263256414561E-14)); +#4056 = VECTOR('',#4057,1.); +#4057 = DIRECTION('',(8.261039131485E-18,-1.)); +#4058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4059 = ORIENTED_EDGE('',*,*,#4060,.F.); +#4060 = EDGE_CURVE('',#4038,#4036,#4061,.T.); +#4061 = SURFACE_CURVE('',#4062,(#4067,#4074),.PCURVE_S1.); +#4062 = CIRCLE('',#4063,3.05); +#4063 = AXIS2_PLACEMENT_3D('',#4064,#4065,#4066); +#4064 = CARTESIAN_POINT('',(-38.99050880019,40.886891492734, + -3.885266447075)); +#4065 = DIRECTION('',(-1.,-4.927146840776E-16,-1.527950784018E-16)); +#4066 = DIRECTION('',(4.927146840776E-16,-1.,1.552111978096E-14)); +#4067 = PCURVE('',#2614,#4068); +#4068 = DEFINITIONAL_REPRESENTATION('',(#4069),#4073); +#4069 = CIRCLE('',#4070,3.05); +#4070 = AXIS2_PLACEMENT_2D('',#4071,#4072); +#4071 = CARTESIAN_POINT('',(8.388934997217E-13,-10.49999999999)); +#4072 = DIRECTION('',(-1.,0.)); +#4073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4074 = PCURVE('',#4075,#4080); +#4075 = CYLINDRICAL_SURFACE('',#4076,3.05); +#4076 = AXIS2_PLACEMENT_3D('',#4077,#4078,#4079); +#4077 = CARTESIAN_POINT('',(-40.99050880019,40.886891492734, + -3.885266447075)); +#4078 = DIRECTION('',(1.,-2.683038976192E-16,1.665334536928E-15)); +#4079 = DIRECTION('',(-1.665334536928E-15,-1.715778472808E-14,1.)); +#4080 = DEFINITIONAL_REPRESENTATION('',(#4081),#4085); +#4081 = LINE('',#4082,#4083); +#4082 = CARTESIAN_POINT('',(7.853981633974,2.)); +#4083 = VECTOR('',#4084,1.); +#4084 = DIRECTION('',(-1.,0.)); +#4085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4086 = FACE_BOUND('',#4087,.F.); +#4087 = EDGE_LOOP('',(#4088)); +#4088 = ORIENTED_EDGE('',*,*,#2599,.T.); +#4089 = ADVANCED_FACE('',(#4090),#2742,.F.); +#4090 = FACE_BOUND('',#4091,.T.); +#4091 = EDGE_LOOP('',(#4092,#4093,#4094,#4122)); +#4092 = ORIENTED_EDGE('',*,*,#3430,.T.); +#4093 = ORIENTED_EDGE('',*,*,#2726,.F.); +#4094 = ORIENTED_EDGE('',*,*,#4095,.T.); +#4095 = EDGE_CURVE('',#2727,#4096,#4098,.T.); +#4096 = VERTEX_POINT('',#4097); +#4097 = CARTESIAN_POINT('',(-36.05622879994,47.236891523071, + 10.664733552925)); +#4098 = SURFACE_CURVE('',#4099,(#4104,#4111),.PCURVE_S1.); +#4099 = CIRCLE('',#4100,2.000000000001); +#4100 = AXIS2_PLACEMENT_3D('',#4101,#4102,#4103); +#4101 = CARTESIAN_POINT('',(-36.05622865001,45.236891523071, + 10.664733552925)); +#4102 = DIRECTION('',(7.573064690122E-29,2.442490654279E-15,-1.)); +#4103 = DIRECTION('',(-1.803187229162E-14,-1.,-2.442490654279E-15)); +#4104 = PCURVE('',#2742,#4105); +#4105 = DEFINITIONAL_REPRESENTATION('',(#4106),#4110); +#4106 = LINE('',#4107,#4108); +#4107 = CARTESIAN_POINT('',(-2.683060107885E-16,0.5)); +#4108 = VECTOR('',#4109,1.); +#4109 = DIRECTION('',(-1.,-7.916047585075E-15)); +#4110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4111 = PCURVE('',#2770,#4112); +#4112 = DEFINITIONAL_REPRESENTATION('',(#4113),#4121); +#4113 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4114,#4115,#4116,#4117, +#4118,#4119,#4120),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#4114 = CARTESIAN_POINT('',(2.350000030336,-2.46714015005)); +#4115 = CARTESIAN_POINT('',(2.350000030336,0.99696146509)); +#4116 = CARTESIAN_POINT('',(5.350000030338,-0.73508934248)); +#4117 = CARTESIAN_POINT('',(8.350000030339,-2.46714015005)); +#4118 = CARTESIAN_POINT('',(5.350000030338,-4.19919095762)); +#4119 = CARTESIAN_POINT('',(2.350000030336,-5.931241765189)); +#4120 = CARTESIAN_POINT('',(2.350000030336,-2.46714015005)); +#4121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4122 = ORIENTED_EDGE('',*,*,#4123,.F.); +#4123 = EDGE_CURVE('',#3403,#4096,#4124,.T.); +#4124 = SURFACE_CURVE('',#4125,(#4129,#4136),.PCURVE_S1.); +#4125 = LINE('',#4126,#4127); +#4126 = CARTESIAN_POINT('',(-36.05622879984,47.236891523071, + 10.164733552925)); +#4127 = VECTOR('',#4128,1.); +#4128 = DIRECTION('',(0.,8.881784197001E-15,-1.)); +#4129 = PCURVE('',#2742,#4130); +#4130 = DEFINITIONAL_REPRESENTATION('',(#4131),#4135); +#4131 = LINE('',#4132,#4133); +#4132 = CARTESIAN_POINT('',(-3.141592578673,-1.7763568394E-14)); +#4133 = VECTOR('',#4134,1.); +#4134 = DIRECTION('',(-0.,-1.)); +#4135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4136 = PCURVE('',#3418,#4137); +#4137 = DEFINITIONAL_REPRESENTATION('',(#4138),#4142); +#4138 = LINE('',#4139,#4140); +#4139 = CARTESIAN_POINT('',(-2.600000277067,-5.195842709112E-15)); +#4140 = VECTOR('',#4141,1.); +#4141 = DIRECTION('',(1.088018502601E-14,-1.)); +#4142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4143 = ADVANCED_FACE('',(#4144),#2770,.F.); +#4144 = FACE_BOUND('',#4145,.F.); +#4145 = EDGE_LOOP('',(#4146,#4167,#4168,#4169)); +#4146 = ORIENTED_EDGE('',*,*,#4147,.T.); +#4147 = EDGE_CURVE('',#4096,#3770,#4148,.T.); +#4148 = SURFACE_CURVE('',#4149,(#4153,#4160),.PCURVE_S1.); +#4149 = LINE('',#4150,#4151); +#4150 = CARTESIAN_POINT('',(-36.05622879959,45.361891646605, + 10.664733552925)); +#4151 = VECTOR('',#4152,1.); +#4152 = DIRECTION('',(-1.363706273624E-10,1.,6.881608909096E-15)); +#4153 = PCURVE('',#2770,#4154); +#4154 = DEFINITIONAL_REPRESENTATION('',(#4155),#4159); +#4155 = LINE('',#4156,#4157); +#4156 = CARTESIAN_POINT('',(4.475000153871,-2.46714000047)); +#4157 = VECTOR('',#4158,1.); +#4158 = DIRECTION('',(1.,1.363886592347E-10)); +#4159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4160 = PCURVE('',#3418,#4161); +#4161 = DEFINITIONAL_REPRESENTATION('',(#4162),#4166); +#4162 = LINE('',#4163,#4164); +#4163 = CARTESIAN_POINT('',(-4.475000153533,0.5)); +#4164 = VECTOR('',#4165,1.); +#4165 = DIRECTION('',(1.,8.880009738104E-15)); +#4166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4167 = ORIENTED_EDGE('',*,*,#3816,.F.); +#4168 = ORIENTED_EDGE('',*,*,#2754,.T.); +#4169 = ORIENTED_EDGE('',*,*,#4095,.T.); +#4170 = ADVANCED_FACE('',(#4171,#4421,#4535),#2877,.T.); +#4171 = FACE_BOUND('',#4172,.F.); +#4172 = EDGE_LOOP('',(#4173,#4196,#4219,#4247,#4275,#4303,#4326,#4347, + #4348,#4371,#4399,#4420)); +#4173 = ORIENTED_EDGE('',*,*,#4174,.F.); +#4174 = EDGE_CURVE('',#4175,#2862,#4177,.T.); +#4175 = VERTEX_POINT('',#4176); +#4176 = CARTESIAN_POINT('',(9.443771350028,49.836891800136, + -38.93526644707)); +#4177 = SURFACE_CURVE('',#4178,(#4182,#4189),.PCURVE_S1.); +#4178 = LINE('',#4179,#4180); +#4179 = CARTESIAN_POINT('',(9.443771350028,51.437845900068, + -38.93526644707)); +#4180 = VECTOR('',#4181,1.); +#4181 = DIRECTION('',(-1.114188106855E-15,-1.,-1.749016157657E-15)); +#4182 = PCURVE('',#2877,#4183); +#4183 = DEFINITIONAL_REPRESENTATION('',(#4184),#4188); +#4184 = LINE('',#4185,#4186); +#4185 = CARTESIAN_POINT('',(21.344154339278,1.600954099931)); +#4186 = VECTOR('',#4187,1.); +#4187 = DIRECTION('',(1.691768418476E-14,1.)); +#4188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4189 = PCURVE('',#2910,#4190); +#4190 = DEFINITIONAL_REPRESENTATION('',(#4191),#4195); +#4191 = LINE('',#4192,#4193); +#4192 = CARTESIAN_POINT('',(-0.785398163398,0.)); +#4193 = VECTOR('',#4194,1.); +#4194 = DIRECTION('',(1.426543502197E-16,1.)); +#4195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4196 = ORIENTED_EDGE('',*,*,#4197,.F.); +#4197 = EDGE_CURVE('',#4198,#4175,#4200,.T.); +#4198 = VERTEX_POINT('',#4199); +#4199 = CARTESIAN_POINT('',(-14.,49.836891800136,-38.93526644709)); +#4200 = SURFACE_CURVE('',#4201,(#4205,#4212),.PCURVE_S1.); +#4201 = LINE('',#4202,#4203); +#4202 = CARTESIAN_POINT('',(7.943771350027,49.836891800136, + -38.93526644707)); +#4203 = VECTOR('',#4204,1.); +#4204 = DIRECTION('',(1.,-2.22044604925E-15,9.969802761134E-13)); +#4205 = PCURVE('',#2877,#4206); +#4206 = DEFINITIONAL_REPRESENTATION('',(#4207),#4211); +#4207 = LINE('',#4208,#4209); +#4208 = CARTESIAN_POINT('',(19.844154339277,3.201908199863)); +#4209 = VECTOR('',#4210,1.); +#4210 = DIRECTION('',(1.,-1.581142624237E-14)); +#4211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4212 = PCURVE('',#3390,#4213); +#4213 = DEFINITIONAL_REPRESENTATION('',(#4214),#4218); +#4214 = LINE('',#4215,#4216); +#4215 = CARTESIAN_POINT('',(-22.93409425158,33.094999999995)); +#4216 = VECTOR('',#4217,1.); +#4217 = DIRECTION('',(-1.,-9.975625198246E-13)); +#4218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4219 = ORIENTED_EDGE('',*,*,#4220,.F.); +#4220 = EDGE_CURVE('',#4221,#4198,#4223,.T.); +#4221 = VERTEX_POINT('',#4222); +#4222 = CARTESIAN_POINT('',(-14.,47.7738,-38.93526644707)); +#4223 = SURFACE_CURVE('',#4224,(#4228,#4235),.PCURVE_S1.); +#4224 = LINE('',#4225,#4226); +#4225 = CARTESIAN_POINT('',(-14.,52.656299999999,-38.93526644707)); +#4226 = VECTOR('',#4227,1.); +#4227 = DIRECTION('',(-0.,1.,1.749016157657E-15)); +#4228 = PCURVE('',#2877,#4229); +#4229 = DEFINITIONAL_REPRESENTATION('',(#4230),#4234); +#4230 = LINE('',#4231,#4232); +#4231 = CARTESIAN_POINT('',(-2.09961701075,0.3825)); +#4232 = VECTOR('',#4233,1.); +#4233 = DIRECTION('',(-1.803187229162E-14,-1.)); +#4234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4235 = PCURVE('',#4236,#4241); +#4236 = PLANE('',#4237); +#4237 = AXIS2_PLACEMENT_3D('',#4238,#4239,#4240); +#4238 = CARTESIAN_POINT('',(-14.,52.2738,-38.9353)); +#4239 = DIRECTION('',(1.,-0.,-0.)); +#4240 = DIRECTION('',(0.,0.,-1.)); +#4241 = DEFINITIONAL_REPRESENTATION('',(#4242),#4246); +#4242 = LINE('',#4243,#4244); +#4243 = CARTESIAN_POINT('',(-3.355292999885E-05,0.382499999999)); +#4244 = VECTOR('',#4245,1.); +#4245 = DIRECTION('',(-1.749016157657E-15,1.)); +#4246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4247 = ORIENTED_EDGE('',*,*,#4248,.F.); +#4248 = EDGE_CURVE('',#4249,#4221,#4251,.T.); +#4249 = VERTEX_POINT('',#4250); +#4250 = CARTESIAN_POINT('',(-26.,47.7738,-38.93526644707)); +#4251 = SURFACE_CURVE('',#4252,(#4256,#4263),.PCURVE_S1.); +#4252 = LINE('',#4253,#4254); +#4253 = CARTESIAN_POINT('',(-18.95019149462,47.7738,-38.93526644707)); +#4254 = VECTOR('',#4255,1.); +#4255 = DIRECTION('',(1.,-0.,2.835232049136E-14)); +#4256 = PCURVE('',#2877,#4257); +#4257 = DEFINITIONAL_REPRESENTATION('',(#4258),#4262); +#4258 = LINE('',#4259,#4260); +#4259 = CARTESIAN_POINT('',(-7.04980850537,5.264999999999)); +#4260 = VECTOR('',#4261,1.); +#4261 = DIRECTION('',(1.,-1.803187229162E-14)); +#4262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4263 = PCURVE('',#4264,#4269); +#4264 = PLANE('',#4265); +#4265 = AXIS2_PLACEMENT_3D('',#4266,#4267,#4268); +#4266 = CARTESIAN_POINT('',(-26.,47.7738,-38.9353)); +#4267 = DIRECTION('',(-0.,-1.,-0.)); +#4268 = DIRECTION('',(0.,0.,-1.)); +#4269 = DEFINITIONAL_REPRESENTATION('',(#4270),#4274); +#4270 = LINE('',#4271,#4272); +#4271 = CARTESIAN_POINT('',(-3.355292999885E-05,7.04980850538)); +#4272 = VECTOR('',#4273,1.); +#4273 = DIRECTION('',(-2.835232049136E-14,1.)); +#4274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4275 = ORIENTED_EDGE('',*,*,#4276,.T.); +#4276 = EDGE_CURVE('',#4249,#4277,#4279,.T.); +#4277 = VERTEX_POINT('',#4278); +#4278 = CARTESIAN_POINT('',(-26.,49.836891800136,-38.9352664471)); +#4279 = SURFACE_CURVE('',#4280,(#4284,#4291),.PCURVE_S1.); +#4280 = LINE('',#4281,#4282); +#4281 = CARTESIAN_POINT('',(-26.,52.656299999999,-38.93526644707)); +#4282 = VECTOR('',#4283,1.); +#4283 = DIRECTION('',(-0.,1.,1.749016157657E-15)); +#4284 = PCURVE('',#2877,#4285); +#4285 = DEFINITIONAL_REPRESENTATION('',(#4286),#4290); +#4286 = LINE('',#4287,#4288); +#4287 = CARTESIAN_POINT('',(-14.09961701075,0.3825)); +#4288 = VECTOR('',#4289,1.); +#4289 = DIRECTION('',(-1.803187229162E-14,-1.)); +#4290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4291 = PCURVE('',#4292,#4297); +#4292 = PLANE('',#4293); +#4293 = AXIS2_PLACEMENT_3D('',#4294,#4295,#4296); +#4294 = CARTESIAN_POINT('',(-26.,52.2738,-38.9353)); +#4295 = DIRECTION('',(1.,-0.,-0.)); +#4296 = DIRECTION('',(0.,0.,-1.)); +#4297 = DEFINITIONAL_REPRESENTATION('',(#4298),#4302); +#4298 = LINE('',#4299,#4300); +#4299 = CARTESIAN_POINT('',(-3.355292999885E-05,0.382499999999)); +#4300 = VECTOR('',#4301,1.); +#4301 = DIRECTION('',(-1.749016157657E-15,1.)); +#4302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4303 = ORIENTED_EDGE('',*,*,#4304,.F.); +#4304 = EDGE_CURVE('',#4305,#4277,#4307,.T.); +#4305 = VERTEX_POINT('',#4306); +#4306 = CARTESIAN_POINT('',(-27.21550880021,49.836891800136, + -38.93526644711)); +#4307 = SURFACE_CURVE('',#4308,(#4312,#4319),.PCURVE_S1.); +#4308 = LINE('',#4309,#4310); +#4309 = CARTESIAN_POINT('',(7.943771350027,49.836891800136, + -38.93526644707)); +#4310 = VECTOR('',#4311,1.); +#4311 = DIRECTION('',(1.,-2.22044604925E-15,9.969802761134E-13)); +#4312 = PCURVE('',#2877,#4313); +#4313 = DEFINITIONAL_REPRESENTATION('',(#4314),#4318); +#4314 = LINE('',#4315,#4316); +#4315 = CARTESIAN_POINT('',(19.844154339277,3.201908199863)); +#4316 = VECTOR('',#4317,1.); +#4317 = DIRECTION('',(1.,-1.581142624237E-14)); +#4318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4319 = PCURVE('',#3390,#4320); +#4320 = DEFINITIONAL_REPRESENTATION('',(#4321),#4325); +#4321 = LINE('',#4322,#4323); +#4322 = CARTESIAN_POINT('',(-22.93409425158,33.094999999995)); +#4323 = VECTOR('',#4324,1.); +#4324 = DIRECTION('',(-1.,-9.975625198246E-13)); +#4325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4326 = ORIENTED_EDGE('',*,*,#4327,.F.); +#4327 = EDGE_CURVE('',#3211,#4305,#4328,.T.); +#4328 = SURFACE_CURVE('',#4329,(#4333,#4340),.PCURVE_S1.); +#4329 = LINE('',#4330,#4331); +#4330 = CARTESIAN_POINT('',(-27.21550880021,28.397606048065, + -38.93526644707)); +#4331 = VECTOR('',#4332,1.); +#4332 = DIRECTION('',(6.189493362287E-15,1.,1.749016157657E-15)); +#4333 = PCURVE('',#2877,#4334); +#4334 = DEFINITIONAL_REPRESENTATION('',(#4335),#4339); +#4335 = LINE('',#4336,#4337); +#4336 = CARTESIAN_POINT('',(-15.31512581096,24.641193951934)); +#4337 = VECTOR('',#4338,1.); +#4338 = DIRECTION('',(-1.184237892933E-14,-1.)); +#4339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4340 = PCURVE('',#3231,#4341); +#4341 = DEFINITIONAL_REPRESENTATION('',(#4342),#4346); +#4342 = LINE('',#4343,#4344); +#4343 = CARTESIAN_POINT('',(0.785398163397,7.105427357601E-15)); +#4344 = VECTOR('',#4345,1.); +#4345 = DIRECTION('',(-0.,-1.)); +#4346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4347 = ORIENTED_EDGE('',*,*,#3243,.T.); +#4348 = ORIENTED_EDGE('',*,*,#4349,.T.); +#4349 = EDGE_CURVE('',#3244,#4350,#4352,.T.); +#4350 = VERTEX_POINT('',#4351); +#4351 = CARTESIAN_POINT('',(-26.,33.9738,-38.93526644707)); +#4352 = SURFACE_CURVE('',#4353,(#4357,#4364),.PCURVE_S1.); +#4353 = LINE('',#4354,#4355); +#4354 = CARTESIAN_POINT('',(-26.,43.506299999999,-38.93526644707)); +#4355 = VECTOR('',#4356,1.); +#4356 = DIRECTION('',(-0.,1.,1.749016157657E-15)); +#4357 = PCURVE('',#2877,#4358); +#4358 = DEFINITIONAL_REPRESENTATION('',(#4359),#4363); +#4359 = LINE('',#4360,#4361); +#4360 = CARTESIAN_POINT('',(-14.09961701075,9.5325)); +#4361 = VECTOR('',#4362,1.); +#4362 = DIRECTION('',(-1.803187229162E-14,-1.)); +#4363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4364 = PCURVE('',#3282,#4365); +#4365 = DEFINITIONAL_REPRESENTATION('',(#4366),#4370); +#4366 = LINE('',#4367,#4368); +#4367 = CARTESIAN_POINT('',(-3.355292999885E-05,9.532499999999)); +#4368 = VECTOR('',#4369,1.); +#4369 = DIRECTION('',(-1.749016157657E-15,1.)); +#4370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4371 = ORIENTED_EDGE('',*,*,#4372,.T.); +#4372 = EDGE_CURVE('',#4350,#4373,#4375,.T.); +#4373 = VERTEX_POINT('',#4374); +#4374 = CARTESIAN_POINT('',(-14.,33.9738,-38.93526644707)); +#4375 = SURFACE_CURVE('',#4376,(#4380,#4387),.PCURVE_S1.); +#4376 = LINE('',#4377,#4378); +#4377 = CARTESIAN_POINT('',(-18.95019149462,33.9738,-38.93526644707)); +#4378 = VECTOR('',#4379,1.); +#4379 = DIRECTION('',(1.,-0.,2.835232049136E-14)); +#4380 = PCURVE('',#2877,#4381); +#4381 = DEFINITIONAL_REPRESENTATION('',(#4382),#4386); +#4382 = LINE('',#4383,#4384); +#4383 = CARTESIAN_POINT('',(-7.04980850537,19.064999999999)); +#4384 = VECTOR('',#4385,1.); +#4385 = DIRECTION('',(1.,-1.803187229162E-14)); +#4386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4387 = PCURVE('',#4388,#4393); +#4388 = PLANE('',#4389); +#4389 = AXIS2_PLACEMENT_3D('',#4390,#4391,#4392); +#4390 = CARTESIAN_POINT('',(-26.,33.9738,-38.9353)); +#4391 = DIRECTION('',(-0.,-1.,-0.)); +#4392 = DIRECTION('',(0.,0.,-1.)); +#4393 = DEFINITIONAL_REPRESENTATION('',(#4394),#4398); +#4394 = LINE('',#4395,#4396); +#4395 = CARTESIAN_POINT('',(-3.355292999885E-05,7.04980850538)); +#4396 = VECTOR('',#4397,1.); +#4397 = DIRECTION('',(-2.835232049136E-14,1.)); +#4398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4399 = ORIENTED_EDGE('',*,*,#4400,.F.); +#4400 = EDGE_CURVE('',#2860,#4373,#4401,.T.); +#4401 = SURFACE_CURVE('',#4402,(#4406,#4413),.PCURVE_S1.); +#4402 = LINE('',#4403,#4404); +#4403 = CARTESIAN_POINT('',(-14.,43.506299999999,-38.93526644707)); +#4404 = VECTOR('',#4405,1.); +#4405 = DIRECTION('',(-0.,1.,1.749016157657E-15)); +#4406 = PCURVE('',#2877,#4407); +#4407 = DEFINITIONAL_REPRESENTATION('',(#4408),#4412); +#4408 = LINE('',#4409,#4410); +#4409 = CARTESIAN_POINT('',(-2.09961701075,9.5325)); +#4410 = VECTOR('',#4411,1.); +#4411 = DIRECTION('',(-1.803187229162E-14,-1.)); +#4412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4413 = PCURVE('',#3336,#4414); +#4414 = DEFINITIONAL_REPRESENTATION('',(#4415),#4419); +#4415 = LINE('',#4416,#4417); +#4416 = CARTESIAN_POINT('',(-3.355292999885E-05,9.532499999999)); +#4417 = VECTOR('',#4418,1.); +#4418 = DIRECTION('',(-1.749016157657E-15,1.)); +#4419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4420 = ORIENTED_EDGE('',*,*,#2859,.T.); +#4421 = FACE_BOUND('',#4422,.F.); +#4422 = EDGE_LOOP('',(#4423,#4453,#4481,#4509)); +#4423 = ORIENTED_EDGE('',*,*,#4424,.F.); +#4424 = EDGE_CURVE('',#4425,#4427,#4429,.T.); +#4425 = VERTEX_POINT('',#4426); +#4426 = CARTESIAN_POINT('',(-23.71550880019,38.086891523069, + -38.93526644707)); +#4427 = VERTEX_POINT('',#4428); +#4428 = CARTESIAN_POINT('',(-23.71550880021,43.686891523071, + -38.93526644707)); +#4429 = SURFACE_CURVE('',#4430,(#4434,#4441),.PCURVE_S1.); +#4430 = LINE('',#4431,#4432); +#4431 = CARTESIAN_POINT('',(-23.7155088002,51.437845900067, + -38.93526644707)); +#4432 = VECTOR('',#4433,1.); +#4433 = DIRECTION('',(-1.712146174558E-14,1.,1.749016157657E-15)); +#4434 = PCURVE('',#2877,#4435); +#4435 = DEFINITIONAL_REPRESENTATION('',(#4436),#4440); +#4436 = LINE('',#4437,#4438); +#4437 = CARTESIAN_POINT('',(-11.81512581095,1.600954099932)); +#4438 = VECTOR('',#4439,1.); +#4439 = DIRECTION('',(-3.51533340372E-14,-1.)); +#4440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4441 = PCURVE('',#4442,#4447); +#4442 = PLANE('',#4443); +#4443 = AXIS2_PLACEMENT_3D('',#4444,#4445,#4446); +#4444 = CARTESIAN_POINT('',(-23.71550880021,47.102391523071, + -33.13526644707)); +#4445 = DIRECTION('',(-1.,1.803187229162E-14,-4.848719991821E-15)); +#4446 = DIRECTION('',(1.803187229162E-14,1.,-1.189244560643E-14)); +#4447 = DEFINITIONAL_REPRESENTATION('',(#4448),#4452); +#4448 = LINE('',#4449,#4450); +#4449 = CARTESIAN_POINT('',(4.335454376996,5.8)); +#4450 = VECTOR('',#4451,1.); +#4451 = DIRECTION('',(1.,-1.364146176409E-14)); +#4452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4453 = ORIENTED_EDGE('',*,*,#4454,.T.); +#4454 = EDGE_CURVE('',#4425,#4455,#4457,.T.); +#4455 = VERTEX_POINT('',#4456); +#4456 = CARTESIAN_POINT('',(-25.71550880019,38.086891523069, + -38.93526644707)); +#4457 = SURFACE_CURVE('',#4458,(#4462,#4469),.PCURVE_S1.); +#4458 = LINE('',#4459,#4460); +#4459 = CARTESIAN_POINT('',(-2.606938762646,38.08689152307, + -38.93526644707)); +#4460 = VECTOR('',#4461,1.); +#4461 = DIRECTION('',(-1.,2.171174580843E-14,7.035899006047E-15)); +#4462 = PCURVE('',#2877,#4463); +#4463 = DEFINITIONAL_REPRESENTATION('',(#4464),#4468); +#4464 = LINE('',#4465,#4466); +#4465 = CARTESIAN_POINT('',(9.293444226604,14.951908476929)); +#4466 = VECTOR('',#4467,1.); +#4467 = DIRECTION('',(-1.,-3.67987351681E-15)); +#4468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4469 = PCURVE('',#4470,#4475); +#4470 = PLANE('',#4471); +#4471 = AXIS2_PLACEMENT_3D('',#4472,#4473,#4474); +#4472 = CARTESIAN_POINT('',(-3.690508800217,38.08689152307, + -33.13526644707)); +#4473 = DIRECTION('',(-2.22044604925E-14,-1.,-1.242186492284E-30)); +#4474 = DIRECTION('',(1.387778780783E-17,9.340377011817E-31,-1.)); +#4475 = DEFINITIONAL_REPRESENTATION('',(#4476),#4480); +#4476 = LINE('',#4477,#4478); +#4477 = CARTESIAN_POINT('',(5.8,1.083570037571)); +#4478 = VECTOR('',#4479,1.); +#4479 = DIRECTION('',(-7.049776793855E-15,-1.)); +#4480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4481 = ORIENTED_EDGE('',*,*,#4482,.T.); +#4482 = EDGE_CURVE('',#4455,#4483,#4485,.T.); +#4483 = VERTEX_POINT('',#4484); +#4484 = CARTESIAN_POINT('',(-25.71550880021,43.686891523071, + -38.93526644707)); +#4485 = SURFACE_CURVE('',#4486,(#4490,#4497),.PCURVE_S1.); +#4486 = LINE('',#4487,#4488); +#4487 = CARTESIAN_POINT('',(-25.71550880021,41.494641507901, + -38.93526644707)); +#4488 = VECTOR('',#4489,1.); +#4489 = DIRECTION('',(1.753915760754E-14,1.,5.573117686922E-15)); +#4490 = PCURVE('',#2877,#4491); +#4491 = DEFINITIONAL_REPRESENTATION('',(#4492),#4496); +#4492 = LINE('',#4493,#4494); +#4493 = CARTESIAN_POINT('',(-13.81512581096,11.544158492098)); +#4494 = VECTOR('',#4495,1.); +#4495 = DIRECTION('',(-4.927146840798E-16,-1.)); +#4496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4497 = PCURVE('',#4498,#4503); +#4498 = PLANE('',#4499); +#4499 = AXIS2_PLACEMENT_3D('',#4500,#4501,#4502); +#4500 = CARTESIAN_POINT('',(-25.71550880021,42.102391523071, + -33.13526644707)); +#4501 = DIRECTION('',(-1.,1.803187229162E-14,-4.084695544767E-15)); +#4502 = DIRECTION('',(-1.803187229162E-14,-1.,-9.513794675468E-13)); +#4503 = DEFINITIONAL_REPRESENTATION('',(#4504),#4508); +#4504 = LINE('',#4505,#4506); +#4505 = CARTESIAN_POINT('',(0.607750015176,-5.799999999999)); +#4506 = VECTOR('',#4507,1.); +#4507 = DIRECTION('',(-1.,-9.458063498599E-13)); +#4508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4509 = ORIENTED_EDGE('',*,*,#4510,.T.); +#4510 = EDGE_CURVE('',#4483,#4427,#4511,.T.); +#4511 = SURFACE_CURVE('',#4512,(#4516,#4523),.PCURVE_S1.); +#4512 = LINE('',#4513,#4514); +#4513 = CARTESIAN_POINT('',(-3.606938762645,43.68689152307, + -38.93526644707)); +#4514 = VECTOR('',#4515,1.); +#4515 = DIRECTION('',(1.,-1.753915760754E-14,-7.035899006047E-15)); +#4516 = PCURVE('',#2877,#4517); +#4517 = DEFINITIONAL_REPRESENTATION('',(#4518),#4522); +#4518 = LINE('',#4519,#4520); +#4519 = CARTESIAN_POINT('',(8.293444226605,9.351908476929)); +#4520 = VECTOR('',#4521,1.); +#4521 = DIRECTION('',(1.,-4.927146840799E-16)); +#4522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4523 = PCURVE('',#4524,#4529); +#4524 = PLANE('',#4525); +#4525 = AXIS2_PLACEMENT_3D('',#4526,#4527,#4528); +#4526 = CARTESIAN_POINT('',(-5.690508800216,43.686891523071, + -33.13526644707)); +#4527 = DIRECTION('',(1.803187229162E-14,1.,5.871122787574E-15)); +#4528 = DIRECTION('',(1.,-1.803187229162E-14,2.776945340344E-14)); +#4529 = DEFINITIONAL_REPRESENTATION('',(#4530),#4534); +#4530 = LINE('',#4531,#4532); +#4531 = CARTESIAN_POINT('',(2.083570037571,5.8)); +#4532 = VECTOR('',#4533,1.); +#4533 = DIRECTION('',(1.,3.480535240949E-14)); +#4534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4535 = FACE_BOUND('',#4536,.F.); +#4536 = EDGE_LOOP('',(#4537)); +#4537 = ORIENTED_EDGE('',*,*,#4538,.T.); +#4538 = EDGE_CURVE('',#4539,#4539,#4541,.T.); +#4539 = VERTEX_POINT('',#4540); +#4540 = CARTESIAN_POINT('',(-2.982837108069,40.886891492733, + -38.93526644707)); +#4541 = SURFACE_CURVE('',#4542,(#4547,#4554),.PCURVE_S1.); +#4542 = CIRCLE('',#4543,3.05); +#4543 = AXIS2_PLACEMENT_3D('',#4544,#4545,#4546); +#4544 = CARTESIAN_POINT('',(-6.032837108069,40.886891492734, + -38.93526644707)); +#4545 = DIRECTION('',(2.835232049136E-14,1.749016157657E-15,-1.)); +#4546 = DIRECTION('',(-1.,1.803187229162E-14,-2.835232049136E-14)); +#4547 = PCURVE('',#2877,#4548); +#4548 = DEFINITIONAL_REPRESENTATION('',(#4549),#4553); +#4549 = CIRCLE('',#4550,3.05); +#4550 = AXIS2_PLACEMENT_2D('',#4551,#4552); +#4551 = CARTESIAN_POINT('',(5.867545881181,12.151908507265)); +#4552 = DIRECTION('',(-1.,-8.98431287672E-31)); +#4553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4554 = PCURVE('',#4017,#4555); +#4555 = DEFINITIONAL_REPRESENTATION('',(#4556),#4560); +#4556 = LINE('',#4557,#4558); +#4557 = CARTESIAN_POINT('',(4.138911435803E-13,-1.100000000013)); +#4558 = VECTOR('',#4559,1.); +#4559 = DIRECTION('',(-1.,0.)); +#4560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4561 = ADVANCED_FACE('',(#4562),#3336,.T.); +#4562 = FACE_BOUND('',#4563,.F.); +#4563 = EDGE_LOOP('',(#4564,#4587,#4615,#4643,#4664,#4665)); +#4564 = ORIENTED_EDGE('',*,*,#4565,.F.); +#4565 = EDGE_CURVE('',#4566,#4373,#4568,.T.); +#4566 = VERTEX_POINT('',#4567); +#4567 = CARTESIAN_POINT('',(-14.,33.9738,-38.9353)); +#4568 = SURFACE_CURVE('',#4569,(#4573,#4580),.PCURVE_S1.); +#4569 = LINE('',#4570,#4571); +#4570 = CARTESIAN_POINT('',(-14.,33.9738,-38.9353)); +#4571 = VECTOR('',#4572,1.); +#4572 = DIRECTION('',(-0.,-0.,1.)); +#4573 = PCURVE('',#3336,#4574); +#4574 = DEFINITIONAL_REPRESENTATION('',(#4575),#4579); +#4575 = LINE('',#4576,#4577); +#4576 = CARTESIAN_POINT('',(-0.,0.)); +#4577 = VECTOR('',#4578,1.); +#4578 = DIRECTION('',(-1.,0.)); +#4579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4580 = PCURVE('',#4388,#4581); +#4581 = DEFINITIONAL_REPRESENTATION('',(#4582),#4586); +#4582 = LINE('',#4583,#4584); +#4583 = CARTESIAN_POINT('',(-0.,12.)); +#4584 = VECTOR('',#4585,1.); +#4585 = DIRECTION('',(-1.,0.)); +#4586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4587 = ORIENTED_EDGE('',*,*,#4588,.T.); +#4588 = EDGE_CURVE('',#4566,#4589,#4591,.T.); +#4589 = VERTEX_POINT('',#4590); +#4590 = CARTESIAN_POINT('',(-14.,21.6369,-38.9353)); +#4591 = SURFACE_CURVE('',#4592,(#4596,#4603),.PCURVE_S1.); +#4592 = LINE('',#4593,#4594); +#4593 = CARTESIAN_POINT('',(-14.,33.9738,-38.9353)); +#4594 = VECTOR('',#4595,1.); +#4595 = DIRECTION('',(-0.,-1.,-0.)); +#4596 = PCURVE('',#3336,#4597); +#4597 = DEFINITIONAL_REPRESENTATION('',(#4598),#4602); +#4598 = LINE('',#4599,#4600); +#4599 = CARTESIAN_POINT('',(-0.,0.)); +#4600 = VECTOR('',#4601,1.); +#4601 = DIRECTION('',(-0.,-1.)); +#4602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4603 = PCURVE('',#4604,#4609); +#4604 = PLANE('',#4605); +#4605 = AXIS2_PLACEMENT_3D('',#4606,#4607,#4608); +#4606 = CARTESIAN_POINT('',(-26.,33.9738,-38.9353)); +#4607 = DIRECTION('',(-0.,-0.,1.)); +#4608 = DIRECTION('',(-1.,0.,0.)); +#4609 = DEFINITIONAL_REPRESENTATION('',(#4610),#4614); +#4610 = LINE('',#4611,#4612); +#4611 = CARTESIAN_POINT('',(-12.,-0.)); +#4612 = VECTOR('',#4613,1.); +#4613 = DIRECTION('',(-0.,1.)); +#4614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4615 = ORIENTED_EDGE('',*,*,#4616,.T.); +#4616 = EDGE_CURVE('',#4589,#4617,#4619,.T.); +#4617 = VERTEX_POINT('',#4618); +#4618 = CARTESIAN_POINT('',(-14.,21.6369,-33.9353)); +#4619 = SURFACE_CURVE('',#4620,(#4624,#4631),.PCURVE_S1.); +#4620 = LINE('',#4621,#4622); +#4621 = CARTESIAN_POINT('',(-14.,21.6369,-38.9353)); +#4622 = VECTOR('',#4623,1.); +#4623 = DIRECTION('',(-0.,-0.,1.)); +#4624 = PCURVE('',#3336,#4625); +#4625 = DEFINITIONAL_REPRESENTATION('',(#4626),#4630); +#4626 = LINE('',#4627,#4628); +#4627 = CARTESIAN_POINT('',(-0.,-12.3369)); +#4628 = VECTOR('',#4629,1.); +#4629 = DIRECTION('',(-1.,0.)); +#4630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4631 = PCURVE('',#4632,#4637); +#4632 = CYLINDRICAL_SURFACE('',#4633,1.7); +#4633 = AXIS2_PLACEMENT_3D('',#4634,#4635,#4636); +#4634 = CARTESIAN_POINT('',(-15.7,21.6369,-38.9353)); +#4635 = DIRECTION('',(-0.,-0.,1.)); +#4636 = DIRECTION('',(1.,-0.,-0.)); +#4637 = DEFINITIONAL_REPRESENTATION('',(#4638),#4642); +#4638 = LINE('',#4639,#4640); +#4639 = CARTESIAN_POINT('',(-0.,0.)); +#4640 = VECTOR('',#4641,1.); +#4641 = DIRECTION('',(-0.,1.)); +#4642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4643 = ORIENTED_EDGE('',*,*,#4644,.T.); +#4644 = EDGE_CURVE('',#4617,#3295,#4645,.T.); +#4645 = SURFACE_CURVE('',#4646,(#4650,#4657),.PCURVE_S1.); +#4646 = LINE('',#4647,#4648); +#4647 = CARTESIAN_POINT('',(-14.,21.6369,-33.9353)); +#4648 = VECTOR('',#4649,1.); +#4649 = DIRECTION('',(-0.,1.,-0.)); +#4650 = PCURVE('',#3336,#4651); +#4651 = DEFINITIONAL_REPRESENTATION('',(#4652),#4656); +#4652 = LINE('',#4653,#4654); +#4653 = CARTESIAN_POINT('',(-5.,-12.3369)); +#4654 = VECTOR('',#4655,1.); +#4655 = DIRECTION('',(-0.,1.)); +#4656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4657 = PCURVE('',#3310,#4658); +#4658 = DEFINITIONAL_REPRESENTATION('',(#4659),#4663); +#4659 = LINE('',#4660,#4661); +#4660 = CARTESIAN_POINT('',(-12.,12.3369)); +#4661 = VECTOR('',#4662,1.); +#4662 = DIRECTION('',(-0.,-1.)); +#4663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4664 = ORIENTED_EDGE('',*,*,#3322,.F.); +#4665 = ORIENTED_EDGE('',*,*,#4400,.T.); +#4666 = ADVANCED_FACE('',(#4667,#4777),#3310,.T.); +#4667 = FACE_BOUND('',#4668,.F.); +#4668 = EDGE_LOOP('',(#4669,#4670,#4671,#4699,#4727,#4756)); +#4669 = ORIENTED_EDGE('',*,*,#3294,.F.); +#4670 = ORIENTED_EDGE('',*,*,#4644,.F.); +#4671 = ORIENTED_EDGE('',*,*,#4672,.T.); +#4672 = EDGE_CURVE('',#4617,#4673,#4675,.T.); +#4673 = VERTEX_POINT('',#4674); +#4674 = CARTESIAN_POINT('',(-15.7,19.9369,-33.9353)); +#4675 = SURFACE_CURVE('',#4676,(#4681,#4692),.PCURVE_S1.); +#4676 = CIRCLE('',#4677,1.7); +#4677 = AXIS2_PLACEMENT_3D('',#4678,#4679,#4680); +#4678 = CARTESIAN_POINT('',(-15.7,21.6369,-33.9353)); +#4679 = DIRECTION('',(-0.,-0.,-1.)); +#4680 = DIRECTION('',(-0.,1.,-0.)); +#4681 = PCURVE('',#3310,#4682); +#4682 = DEFINITIONAL_REPRESENTATION('',(#4683),#4691); +#4683 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4684,#4685,#4686,#4687, +#4688,#4689,#4690),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#4684 = CARTESIAN_POINT('',(-10.3,10.6369)); +#4685 = CARTESIAN_POINT('',(-13.24448637286,10.6369)); +#4686 = CARTESIAN_POINT('',(-11.77224318643,13.1869)); +#4687 = CARTESIAN_POINT('',(-10.3,15.7369)); +#4688 = CARTESIAN_POINT('',(-8.827756813566,13.1869)); +#4689 = CARTESIAN_POINT('',(-7.355513627133,10.6369)); +#4690 = CARTESIAN_POINT('',(-10.3,10.6369)); +#4691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4692 = PCURVE('',#4632,#4693); +#4693 = DEFINITIONAL_REPRESENTATION('',(#4694),#4698); +#4694 = LINE('',#4695,#4696); +#4695 = CARTESIAN_POINT('',(1.570796326795,5.)); +#4696 = VECTOR('',#4697,1.); +#4697 = DIRECTION('',(-1.,0.)); +#4698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4699 = ORIENTED_EDGE('',*,*,#4700,.F.); +#4700 = EDGE_CURVE('',#4701,#4673,#4703,.T.); +#4701 = VERTEX_POINT('',#4702); +#4702 = CARTESIAN_POINT('',(-24.3,19.9369,-33.9353)); +#4703 = SURFACE_CURVE('',#4704,(#4708,#4715),.PCURVE_S1.); +#4704 = LINE('',#4705,#4706); +#4705 = CARTESIAN_POINT('',(-26.,19.9369,-33.9353)); +#4706 = VECTOR('',#4707,1.); +#4707 = DIRECTION('',(1.,-0.,-0.)); +#4708 = PCURVE('',#3310,#4709); +#4709 = DEFINITIONAL_REPRESENTATION('',(#4710),#4714); +#4710 = LINE('',#4711,#4712); +#4711 = CARTESIAN_POINT('',(-0.,14.0369)); +#4712 = VECTOR('',#4713,1.); +#4713 = DIRECTION('',(-1.,0.)); +#4714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4715 = PCURVE('',#4716,#4721); +#4716 = PLANE('',#4717); +#4717 = AXIS2_PLACEMENT_3D('',#4718,#4719,#4720); +#4718 = CARTESIAN_POINT('',(-26.,19.9369,-38.9353)); +#4719 = DIRECTION('',(-0.,-1.,-0.)); +#4720 = DIRECTION('',(0.,0.,-1.)); +#4721 = DEFINITIONAL_REPRESENTATION('',(#4722),#4726); +#4722 = LINE('',#4723,#4724); +#4723 = CARTESIAN_POINT('',(-5.,0.)); +#4724 = VECTOR('',#4725,1.); +#4725 = DIRECTION('',(-0.,1.)); +#4726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4727 = ORIENTED_EDGE('',*,*,#4728,.F.); +#4728 = EDGE_CURVE('',#4729,#4701,#4731,.T.); +#4729 = VERTEX_POINT('',#4730); +#4730 = CARTESIAN_POINT('',(-26.,21.6369,-33.9353)); +#4731 = SURFACE_CURVE('',#4732,(#4737,#4744),.PCURVE_S1.); +#4732 = CIRCLE('',#4733,1.7); +#4733 = AXIS2_PLACEMENT_3D('',#4734,#4735,#4736); +#4734 = CARTESIAN_POINT('',(-24.3,21.6369,-33.9353)); +#4735 = DIRECTION('',(-0.,0.,1.)); +#4736 = DIRECTION('',(-0.,1.,-0.)); +#4737 = PCURVE('',#3310,#4738); +#4738 = DEFINITIONAL_REPRESENTATION('',(#4739),#4743); +#4739 = CIRCLE('',#4740,1.7); +#4740 = AXIS2_PLACEMENT_2D('',#4741,#4742); +#4741 = CARTESIAN_POINT('',(-1.7,12.3369)); +#4742 = DIRECTION('',(-0.,-1.)); +#4743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4744 = PCURVE('',#4745,#4750); +#4745 = CYLINDRICAL_SURFACE('',#4746,1.7); +#4746 = AXIS2_PLACEMENT_3D('',#4747,#4748,#4749); +#4747 = CARTESIAN_POINT('',(-24.3,21.6369,-38.9353)); +#4748 = DIRECTION('',(-0.,-0.,1.)); +#4749 = DIRECTION('',(-1.,-0.,0.)); +#4750 = DEFINITIONAL_REPRESENTATION('',(#4751),#4755); +#4751 = LINE('',#4752,#4753); +#4752 = CARTESIAN_POINT('',(-7.853981633975,5.)); +#4753 = VECTOR('',#4754,1.); +#4754 = DIRECTION('',(1.,-0.)); +#4755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4756 = ORIENTED_EDGE('',*,*,#4757,.T.); +#4757 = EDGE_CURVE('',#4729,#3267,#4758,.T.); +#4758 = SURFACE_CURVE('',#4759,(#4763,#4770),.PCURVE_S1.); +#4759 = LINE('',#4760,#4761); +#4760 = CARTESIAN_POINT('',(-26.,21.6369,-33.9353)); +#4761 = VECTOR('',#4762,1.); +#4762 = DIRECTION('',(-0.,1.,-0.)); +#4763 = PCURVE('',#3310,#4764); +#4764 = DEFINITIONAL_REPRESENTATION('',(#4765),#4769); +#4765 = LINE('',#4766,#4767); +#4766 = CARTESIAN_POINT('',(-0.,12.3369)); +#4767 = VECTOR('',#4768,1.); +#4768 = DIRECTION('',(-0.,-1.)); +#4769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4770 = PCURVE('',#3282,#4771); +#4771 = DEFINITIONAL_REPRESENTATION('',(#4772),#4776); +#4772 = LINE('',#4773,#4774); +#4773 = CARTESIAN_POINT('',(-5.,-12.3369)); +#4774 = VECTOR('',#4775,1.); +#4775 = DIRECTION('',(-0.,1.)); +#4776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4777 = FACE_BOUND('',#4778,.F.); +#4778 = EDGE_LOOP('',(#4779)); +#4779 = ORIENTED_EDGE('',*,*,#4780,.F.); +#4780 = EDGE_CURVE('',#4781,#4781,#4783,.T.); +#4781 = VERTEX_POINT('',#4782); +#4782 = CARTESIAN_POINT('',(-15.5,25.9369,-33.9353)); +#4783 = SURFACE_CURVE('',#4784,(#4789,#4800),.PCURVE_S1.); +#4784 = CIRCLE('',#4785,4.5); +#4785 = AXIS2_PLACEMENT_3D('',#4786,#4787,#4788); +#4786 = CARTESIAN_POINT('',(-20.,25.9369,-33.9353)); +#4787 = DIRECTION('',(0.,0.,-1.)); +#4788 = DIRECTION('',(1.,-0.,-0.)); +#4789 = PCURVE('',#3310,#4790); +#4790 = DEFINITIONAL_REPRESENTATION('',(#4791),#4799); +#4791 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4792,#4793,#4794,#4795, +#4796,#4797,#4798),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#4792 = CARTESIAN_POINT('',(-10.5,8.0369)); +#4793 = CARTESIAN_POINT('',(-10.5,15.83112863406)); +#4794 = CARTESIAN_POINT('',(-3.75,11.93401431703)); +#4795 = CARTESIAN_POINT('',(3.,8.0369)); +#4796 = CARTESIAN_POINT('',(-3.75,4.13978568297)); +#4797 = CARTESIAN_POINT('',(-10.5,0.24267136594)); +#4798 = CARTESIAN_POINT('',(-10.5,8.0369)); +#4799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4800 = PCURVE('',#4801,#4806); +#4801 = CYLINDRICAL_SURFACE('',#4802,4.5); +#4802 = AXIS2_PLACEMENT_3D('',#4803,#4804,#4805); +#4803 = CARTESIAN_POINT('',(-20.,25.9369,-36.7353)); +#4804 = DIRECTION('',(-0.,-0.,1.)); +#4805 = DIRECTION('',(1.,-0.,-0.)); +#4806 = DEFINITIONAL_REPRESENTATION('',(#4807),#4811); +#4807 = LINE('',#4808,#4809); +#4808 = CARTESIAN_POINT('',(-0.,2.8)); +#4809 = VECTOR('',#4810,1.); +#4810 = DIRECTION('',(-1.,0.)); +#4811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4812 = ADVANCED_FACE('',(#4813),#3282,.F.); +#4813 = FACE_BOUND('',#4814,.T.); +#4814 = EDGE_LOOP('',(#4815,#4838,#4861,#4882,#4883,#4884)); +#4815 = ORIENTED_EDGE('',*,*,#4816,.F.); +#4816 = EDGE_CURVE('',#4817,#4350,#4819,.T.); +#4817 = VERTEX_POINT('',#4818); +#4818 = CARTESIAN_POINT('',(-26.,33.9738,-38.9353)); +#4819 = SURFACE_CURVE('',#4820,(#4824,#4831),.PCURVE_S1.); +#4820 = LINE('',#4821,#4822); +#4821 = CARTESIAN_POINT('',(-26.,33.9738,-38.9353)); +#4822 = VECTOR('',#4823,1.); +#4823 = DIRECTION('',(-0.,-0.,1.)); +#4824 = PCURVE('',#3282,#4825); +#4825 = DEFINITIONAL_REPRESENTATION('',(#4826),#4830); +#4826 = LINE('',#4827,#4828); +#4827 = CARTESIAN_POINT('',(-0.,0.)); +#4828 = VECTOR('',#4829,1.); +#4829 = DIRECTION('',(-1.,0.)); +#4830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4831 = PCURVE('',#4388,#4832); +#4832 = DEFINITIONAL_REPRESENTATION('',(#4833),#4837); +#4833 = LINE('',#4834,#4835); +#4834 = CARTESIAN_POINT('',(-0.,0.)); +#4835 = VECTOR('',#4836,1.); +#4836 = DIRECTION('',(-1.,0.)); +#4837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4838 = ORIENTED_EDGE('',*,*,#4839,.F.); +#4839 = EDGE_CURVE('',#4840,#4817,#4842,.T.); +#4840 = VERTEX_POINT('',#4841); +#4841 = CARTESIAN_POINT('',(-26.,21.6369,-38.9353)); +#4842 = SURFACE_CURVE('',#4843,(#4847,#4854),.PCURVE_S1.); +#4843 = LINE('',#4844,#4845); +#4844 = CARTESIAN_POINT('',(-26.,21.6369,-38.9353)); +#4845 = VECTOR('',#4846,1.); +#4846 = DIRECTION('',(-0.,1.,-0.)); +#4847 = PCURVE('',#3282,#4848); +#4848 = DEFINITIONAL_REPRESENTATION('',(#4849),#4853); +#4849 = LINE('',#4850,#4851); +#4850 = CARTESIAN_POINT('',(-0.,-12.3369)); +#4851 = VECTOR('',#4852,1.); +#4852 = DIRECTION('',(-0.,1.)); +#4853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4854 = PCURVE('',#4604,#4855); +#4855 = DEFINITIONAL_REPRESENTATION('',(#4856),#4860); +#4856 = LINE('',#4857,#4858); +#4857 = CARTESIAN_POINT('',(-0.,12.3369)); +#4858 = VECTOR('',#4859,1.); +#4859 = DIRECTION('',(-0.,-1.)); +#4860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4861 = ORIENTED_EDGE('',*,*,#4862,.T.); +#4862 = EDGE_CURVE('',#4840,#4729,#4863,.T.); +#4863 = SURFACE_CURVE('',#4864,(#4868,#4875),.PCURVE_S1.); +#4864 = LINE('',#4865,#4866); +#4865 = CARTESIAN_POINT('',(-26.,21.6369,-38.9353)); +#4866 = VECTOR('',#4867,1.); +#4867 = DIRECTION('',(-0.,-0.,1.)); +#4868 = PCURVE('',#3282,#4869); +#4869 = DEFINITIONAL_REPRESENTATION('',(#4870),#4874); +#4870 = LINE('',#4871,#4872); +#4871 = CARTESIAN_POINT('',(-0.,-12.3369)); +#4872 = VECTOR('',#4873,1.); +#4873 = DIRECTION('',(-1.,0.)); +#4874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4875 = PCURVE('',#4745,#4876); +#4876 = DEFINITIONAL_REPRESENTATION('',(#4877),#4881); +#4877 = LINE('',#4878,#4879); +#4878 = CARTESIAN_POINT('',(-6.28318530718,0.)); +#4879 = VECTOR('',#4880,1.); +#4880 = DIRECTION('',(0.,1.)); +#4881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4882 = ORIENTED_EDGE('',*,*,#4757,.T.); +#4883 = ORIENTED_EDGE('',*,*,#3266,.F.); +#4884 = ORIENTED_EDGE('',*,*,#4349,.T.); +#4885 = ADVANCED_FACE('',(#4886),#3231,.T.); +#4886 = FACE_BOUND('',#4887,.F.); +#4887 = EDGE_LOOP('',(#4888,#4889,#4890,#4918)); +#4888 = ORIENTED_EDGE('',*,*,#3210,.T.); +#4889 = ORIENTED_EDGE('',*,*,#4327,.T.); +#4890 = ORIENTED_EDGE('',*,*,#4891,.T.); +#4891 = EDGE_CURVE('',#4305,#4892,#4894,.T.); +#4892 = VERTEX_POINT('',#4893); +#4893 = CARTESIAN_POINT('',(-28.2155088002,49.836891800136, + -37.93526644707)); +#4894 = SURFACE_CURVE('',#4895,(#4900,#4907),.PCURVE_S1.); +#4895 = CIRCLE('',#4896,1.); +#4896 = AXIS2_PLACEMENT_3D('',#4897,#4898,#4899); +#4897 = CARTESIAN_POINT('',(-27.21550880021,49.836891800138, + -37.93526644707)); +#4898 = DIRECTION('',(-3.228414021756E-15,1.,-2.369891979405E-14)); +#4899 = DIRECTION('',(-0.707106781187,-1.904050034043E-14, + -0.707106781187)); +#4900 = PCURVE('',#3231,#4901); +#4901 = DEFINITIONAL_REPRESENTATION('',(#4902),#4906); +#4902 = LINE('',#4903,#4904); +#4903 = CARTESIAN_POINT('',(6.283185307179,-21.43928575207)); +#4904 = VECTOR('',#4905,1.); +#4905 = DIRECTION('',(-1.,-9.046911093942E-15)); +#4906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4907 = PCURVE('',#3390,#4908); +#4908 = DEFINITIONAL_REPRESENTATION('',(#4909),#4917); +#4909 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4910,#4911,#4912,#4913, +#4914,#4915,#4916),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#4910 = CARTESIAN_POINT('',(12.932292679837,32.802106781182)); +#4911 = CARTESIAN_POINT('',(14.157037551228,31.57736190979)); +#4912 = CARTESIAN_POINT('',(12.484004943753,31.129074173706)); +#4913 = CARTESIAN_POINT('',(10.810972336277,30.680786437622)); +#4914 = CARTESIAN_POINT('',(11.259260072361,32.353819045098)); +#4915 = CARTESIAN_POINT('',(11.707547808445,34.026851652573)); +#4916 = CARTESIAN_POINT('',(12.932292679837,32.802106781182)); +#4917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4918 = ORIENTED_EDGE('',*,*,#4919,.T.); +#4919 = EDGE_CURVE('',#4892,#3183,#4920,.T.); +#4920 = SURFACE_CURVE('',#4921,(#4925,#4932),.PCURVE_S1.); +#4921 = LINE('',#4922,#4923); +#4922 = CARTESIAN_POINT('',(-28.21550880021,28.397606048065, + -37.93526644707)); +#4923 = VECTOR('',#4924,1.); +#4924 = DIRECTION('',(-6.189493362287E-15,-1.,-1.749016157657E-15)); +#4925 = PCURVE('',#3231,#4926); +#4926 = DEFINITIONAL_REPRESENTATION('',(#4927),#4931); +#4927 = LINE('',#4928,#4929); +#4928 = CARTESIAN_POINT('',(-0.785398163397,7.105427357601E-15)); +#4929 = VECTOR('',#4930,1.); +#4930 = DIRECTION('',(-3.535346940228E-16,1.)); +#4931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4932 = PCURVE('',#3198,#4933); +#4933 = DEFINITIONAL_REPRESENTATION('',(#4934),#4938); +#4934 = LINE('',#4935,#4936); +#4935 = CARTESIAN_POINT('',(24.641193951934,8.3)); +#4936 = VECTOR('',#4937,1.); +#4937 = DIRECTION('',(-1.,1.727013593862E-14)); +#4938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4939 = ADVANCED_FACE('',(#4940),#3198,.T.); +#4940 = FACE_BOUND('',#4941,.F.); +#4941 = EDGE_LOOP('',(#4942,#4943,#4966,#4987)); +#4942 = ORIENTED_EDGE('',*,*,#4919,.F.); +#4943 = ORIENTED_EDGE('',*,*,#4944,.F.); +#4944 = EDGE_CURVE('',#4945,#4892,#4947,.T.); +#4945 = VERTEX_POINT('',#4946); +#4946 = CARTESIAN_POINT('',(-28.2155088002,49.836891800136, + -29.53526644707)); +#4947 = SURFACE_CURVE('',#4948,(#4952,#4959),.PCURVE_S1.); +#4948 = LINE('',#4949,#4950); +#4949 = CARTESIAN_POINT('',(-28.2155088002,49.836891800136, + -33.13526644707)); +#4950 = VECTOR('',#4951,1.); +#4951 = DIRECTION('',(1.058875209736E-14,2.200256379606E-17,-1.)); +#4952 = PCURVE('',#3198,#4953); +#4953 = DEFINITIONAL_REPRESENTATION('',(#4954),#4958); +#4954 = LINE('',#4955,#4956); +#4955 = CARTESIAN_POINT('',(46.080479704005,3.499999999999)); +#4956 = VECTOR('',#4957,1.); +#4957 = DIRECTION('',(1.554312234476E-14,1.)); +#4958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4959 = PCURVE('',#3390,#4960); +#4960 = DEFINITIONAL_REPRESENTATION('',(#4961),#4965); +#4961 = LINE('',#4962,#4963); +#4962 = CARTESIAN_POINT('',(13.22518589864,27.294999999995)); +#4963 = VECTOR('',#4964,1.); +#4964 = DIRECTION('',(-1.117099580854E-14,1.)); +#4965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4966 = ORIENTED_EDGE('',*,*,#4967,.F.); +#4967 = EDGE_CURVE('',#3150,#4945,#4968,.T.); +#4968 = SURFACE_CURVE('',#4969,(#4973,#4980),.PCURVE_S1.); +#4969 = LINE('',#4970,#4971); +#4970 = CARTESIAN_POINT('',(-28.21550880021,22.321651794431, + -29.53526644707)); +#4971 = VECTOR('',#4972,1.); +#4972 = DIRECTION('',(6.189493362287E-15,1.,2.242448613047E-15)); +#4973 = PCURVE('',#3198,#4974); +#4974 = DEFINITIONAL_REPRESENTATION('',(#4975),#4979); +#4975 = LINE('',#4976,#4977); +#4976 = CARTESIAN_POINT('',(18.5652396983,-0.1)); +#4977 = VECTOR('',#4978,1.); +#4978 = DIRECTION('',(1.,-1.776356839401E-14)); +#4979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4980 = PCURVE('',#3170,#4981); +#4981 = DEFINITIONAL_REPRESENTATION('',(#4982),#4986); +#4982 = LINE('',#4983,#4984); +#4983 = CARTESIAN_POINT('',(-5.497787143783,7.105427357601E-15)); +#4984 = VECTOR('',#4985,1.); +#4985 = DIRECTION('',(4.961890442425E-17,-1.)); +#4986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4987 = ORIENTED_EDGE('',*,*,#3182,.T.); +#4988 = ADVANCED_FACE('',(#4989),#3170,.T.); +#4989 = FACE_BOUND('',#4990,.F.); +#4990 = EDGE_LOOP('',(#4991,#4992,#4993,#5021)); +#4991 = ORIENTED_EDGE('',*,*,#3149,.T.); +#4992 = ORIENTED_EDGE('',*,*,#4967,.T.); +#4993 = ORIENTED_EDGE('',*,*,#4994,.T.); +#4994 = EDGE_CURVE('',#4945,#4995,#4997,.T.); +#4995 = VERTEX_POINT('',#4996); +#4996 = CARTESIAN_POINT('',(-27.21550880021,49.836891800137, + -28.53526644707)); +#4997 = SURFACE_CURVE('',#4998,(#5003,#5010),.PCURVE_S1.); +#4998 = CIRCLE('',#4999,1.); +#4999 = AXIS2_PLACEMENT_3D('',#5000,#5001,#5002); +#5000 = CARTESIAN_POINT('',(-27.21550880021,49.836891800138, + -29.53526644707)); +#5001 = DIRECTION('',(-3.228414021756E-15,1.,-2.369891979405E-14)); +#5002 = DIRECTION('',(-0.707106781187,1.447483344591E-14,0.707106781187) + ); +#5003 = PCURVE('',#3170,#5004); +#5004 = DEFINITIONAL_REPRESENTATION('',(#5005),#5009); +#5005 = LINE('',#5006,#5007); +#5006 = CARTESIAN_POINT('',(6.039613253961E-14,-27.5152400057)); +#5007 = VECTOR('',#5008,1.); +#5008 = DIRECTION('',(-1.,-2.487900550834E-14)); +#5009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5010 = PCURVE('',#3390,#5011); +#5011 = DEFINITIONAL_REPRESENTATION('',(#5012),#5020); +#5012 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5013,#5014,#5015,#5016, +#5017,#5018,#5019),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5013 = CARTESIAN_POINT('',(12.932292679837,22.987893218808)); +#5014 = CARTESIAN_POINT('',(11.707547808445,21.763148347417)); +#5015 = CARTESIAN_POINT('',(11.259260072361,23.436180954892)); +#5016 = CARTESIAN_POINT('',(10.810972336277,25.109213562368)); +#5017 = CARTESIAN_POINT('',(12.484004943753,24.660925826284)); +#5018 = CARTESIAN_POINT('',(14.157037551228,24.2126380902)); +#5019 = CARTESIAN_POINT('',(12.932292679837,22.987893218808)); +#5020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5021 = ORIENTED_EDGE('',*,*,#5022,.T.); +#5022 = EDGE_CURVE('',#4995,#3122,#5023,.T.); +#5023 = SURFACE_CURVE('',#5024,(#5028,#5035),.PCURVE_S1.); +#5024 = LINE('',#5025,#5026); +#5025 = CARTESIAN_POINT('',(-27.21550880021,22.321651794431, + -28.53526644707)); +#5026 = VECTOR('',#5027,1.); +#5027 = DIRECTION('',(-6.189493362287E-15,-1.,-2.242448613047E-15)); +#5028 = PCURVE('',#3170,#5029); +#5029 = DEFINITIONAL_REPRESENTATION('',(#5030),#5034); +#5030 = LINE('',#5031,#5032); +#5031 = CARTESIAN_POINT('',(-7.068583470577,-3.552713678801E-15)); +#5032 = VECTOR('',#5033,1.); +#5033 = DIRECTION('',(-3.907488723409E-16,1.)); +#5034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5035 = PCURVE('',#3137,#5036); +#5036 = DEFINITIONAL_REPRESENTATION('',(#5037),#5041); +#5037 = LINE('',#5038,#5039); +#5038 = CARTESIAN_POINT('',(-20.97500000001,18.565239698301)); +#5039 = VECTOR('',#5040,1.); +#5040 = DIRECTION('',(1.184237892933E-14,1.)); +#5041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5042 = ADVANCED_FACE('',(#5043),#3137,.F.); +#5043 = FACE_BOUND('',#5044,.F.); +#5044 = EDGE_LOOP('',(#5045,#5068,#5069,#5070,#5093,#5121,#5144,#5167)); +#5045 = ORIENTED_EDGE('',*,*,#5046,.F.); +#5046 = EDGE_CURVE('',#3093,#5047,#5049,.T.); +#5047 = VERTEX_POINT('',#5048); +#5048 = CARTESIAN_POINT('',(-25.08666930589,38.086891523071, + -28.53526644707)); +#5049 = SURFACE_CURVE('',#5050,(#5054,#5061),.PCURVE_S1.); +#5050 = LINE('',#5051,#5052); +#5051 = CARTESIAN_POINT('',(-25.08666930589,49.836891800137, + -28.53526644707)); +#5052 = VECTOR('',#5053,1.); +#5053 = DIRECTION('',(1.618251753135E-29,1.,2.242448613047E-15)); +#5054 = PCURVE('',#3137,#5055); +#5055 = DEFINITIONAL_REPRESENTATION('',(#5056),#5060); +#5056 = LINE('',#5057,#5058); +#5057 = CARTESIAN_POINT('',(-18.84616050569,-8.950000307405)); +#5058 = VECTOR('',#5059,1.); +#5059 = DIRECTION('',(-1.803187229162E-14,-1.)); +#5060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5061 = PCURVE('',#3109,#5062); +#5062 = DEFINITIONAL_REPRESENTATION('',(#5063),#5067); +#5063 = LINE('',#5064,#5065); +#5064 = CARTESIAN_POINT('',(-1.214321307094,0.)); +#5065 = VECTOR('',#5066,1.); +#5066 = DIRECTION('',(5.415721773925E-16,-1.)); +#5067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5068 = ORIENTED_EDGE('',*,*,#3121,.F.); +#5069 = ORIENTED_EDGE('',*,*,#5022,.F.); +#5070 = ORIENTED_EDGE('',*,*,#5071,.F.); +#5071 = EDGE_CURVE('',#5072,#4995,#5074,.T.); +#5072 = VERTEX_POINT('',#5073); +#5073 = CARTESIAN_POINT('',(-25.08666930589,49.836891800137, + -28.53526644707)); +#5074 = SURFACE_CURVE('',#5075,(#5079,#5086),.PCURVE_S1.); +#5075 = LINE('',#5076,#5077); +#5076 = CARTESIAN_POINT('',(-10.61541585088,49.836891800137, + -28.53526644707)); +#5077 = VECTOR('',#5078,1.); +#5078 = DIRECTION('',(-1.,-3.228414021756E-15,7.216449660074E-15)); +#5079 = PCURVE('',#3137,#5080); +#5080 = DEFINITIONAL_REPRESENTATION('',(#5081),#5085); +#5081 = LINE('',#5082,#5083); +#5082 = CARTESIAN_POINT('',(-4.374907050681,-8.950000307405)); +#5083 = VECTOR('',#5084,1.); +#5084 = DIRECTION('',(-1.,2.126028631338E-14)); +#5085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5086 = PCURVE('',#3390,#5087); +#5087 = DEFINITIONAL_REPRESENTATION('',(#5088),#5092); +#5088 = LINE('',#5089,#5090); +#5089 = CARTESIAN_POINT('',(-4.37490705068,22.694999999995)); +#5090 = VECTOR('',#5091,1.); +#5091 = DIRECTION('',(1.,-6.634205948897E-15)); +#5092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5093 = ORIENTED_EDGE('',*,*,#5094,.F.); +#5094 = EDGE_CURVE('',#5095,#5072,#5097,.T.); +#5095 = VERTEX_POINT('',#5096); +#5096 = CARTESIAN_POINT('',(-25.08666930589,43.686891523071, + -28.53526644707)); +#5097 = SURFACE_CURVE('',#5098,(#5102,#5109),.PCURVE_S1.); +#5098 = LINE('',#5099,#5100); +#5099 = CARTESIAN_POINT('',(-25.08666930589,49.836891800137, + -28.53526644707)); +#5100 = VECTOR('',#5101,1.); +#5101 = DIRECTION('',(1.618251753135E-29,1.,2.242448613047E-15)); +#5102 = PCURVE('',#3137,#5103); +#5103 = DEFINITIONAL_REPRESENTATION('',(#5104),#5108); +#5104 = LINE('',#5105,#5106); +#5105 = CARTESIAN_POINT('',(-18.84616050569,-8.950000307405)); +#5106 = VECTOR('',#5107,1.); +#5107 = DIRECTION('',(-1.803187229162E-14,-1.)); +#5108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5109 = PCURVE('',#5110,#5115); +#5110 = CYLINDRICAL_SURFACE('',#5111,0.5); +#5111 = AXIS2_PLACEMENT_3D('',#5112,#5113,#5114); +#5112 = CARTESIAN_POINT('',(-25.08666930589,49.836891800137, + -28.03526644707)); +#5113 = DIRECTION('',(-0.,-1.,-0.)); +#5114 = DIRECTION('',(0.937132766358,-0.,-0.348973033654)); +#5115 = DEFINITIONAL_REPRESENTATION('',(#5116),#5120); +#5116 = LINE('',#5117,#5118); +#5117 = CARTESIAN_POINT('',(-1.214321307094,0.)); +#5118 = VECTOR('',#5119,1.); +#5119 = DIRECTION('',(5.77676994918E-16,-1.)); +#5120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5121 = ORIENTED_EDGE('',*,*,#5122,.F.); +#5122 = EDGE_CURVE('',#5123,#5095,#5125,.T.); +#5123 = VERTEX_POINT('',#5124); +#5124 = CARTESIAN_POINT('',(-25.71550880021,43.686891523071, + -28.53526644707)); +#5125 = SURFACE_CURVE('',#5126,(#5130,#5137),.PCURVE_S1.); +#5126 = LINE('',#5127,#5128); +#5127 = CARTESIAN_POINT('',(-5.965508800207,43.686891523071, + -28.53526644707)); +#5128 = VECTOR('',#5129,1.); +#5129 = DIRECTION('',(1.,-1.803187229162E-14,-7.216449660074E-15)); +#5130 = PCURVE('',#3137,#5131); +#5131 = DEFINITIONAL_REPRESENTATION('',(#5132),#5136); +#5132 = LINE('',#5133,#5134); +#5133 = CARTESIAN_POINT('',(0.274999999992,-2.800000030339)); +#5134 = VECTOR('',#5135,1.); +#5135 = DIRECTION('',(1.,4.052994269354E-31)); +#5136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5137 = PCURVE('',#4524,#5138); +#5138 = DEFINITIONAL_REPRESENTATION('',(#5139),#5143); +#5139 = LINE('',#5140,#5141); +#5140 = CARTESIAN_POINT('',(-0.274999999991,-4.6)); +#5141 = VECTOR('',#5142,1.); +#5142 = DIRECTION('',(1.,3.498590306351E-14)); +#5143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5144 = ORIENTED_EDGE('',*,*,#5145,.F.); +#5145 = EDGE_CURVE('',#5146,#5123,#5148,.T.); +#5146 = VERTEX_POINT('',#5147); +#5147 = CARTESIAN_POINT('',(-25.71550880021,38.086891523071, + -28.53526644707)); +#5148 = SURFACE_CURVE('',#5149,(#5153,#5160),.PCURVE_S1.); +#5149 = LINE('',#5150,#5151); +#5150 = CARTESIAN_POINT('',(-25.71550880021,41.494641507901, + -28.53526644707)); +#5151 = VECTOR('',#5152,1.); +#5152 = DIRECTION('',(1.803187229162E-14,1.,2.242448613047E-15)); +#5153 = PCURVE('',#3137,#5154); +#5154 = DEFINITIONAL_REPRESENTATION('',(#5155),#5159); +#5155 = LINE('',#5156,#5157); +#5156 = CARTESIAN_POINT('',(-19.47500000001,-0.607750015169)); +#5157 = VECTOR('',#5158,1.); +#5158 = DIRECTION('',(-1.618251753136E-29,-1.)); +#5159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5160 = PCURVE('',#4498,#5161); +#5161 = DEFINITIONAL_REPRESENTATION('',(#5162),#5166); +#5162 = LINE('',#5163,#5164); +#5163 = CARTESIAN_POINT('',(0.607750015166,4.600000000001)); +#5164 = VECTOR('',#5165,1.); +#5165 = DIRECTION('',(-1.,-9.491370189338E-13)); +#5166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5167 = ORIENTED_EDGE('',*,*,#5168,.F.); +#5168 = EDGE_CURVE('',#5047,#5146,#5169,.T.); +#5169 = SURFACE_CURVE('',#5170,(#5174,#5181),.PCURVE_S1.); +#5170 = LINE('',#5171,#5172); +#5171 = CARTESIAN_POINT('',(-4.965508800208,38.08689152307, + -28.53526644707)); +#5172 = VECTOR('',#5173,1.); +#5173 = DIRECTION('',(-1.,2.22044604925E-14,7.216449660074E-15)); +#5174 = PCURVE('',#3137,#5175); +#5175 = DEFINITIONAL_REPRESENTATION('',(#5176),#5180); +#5176 = LINE('',#5177,#5178); +#5177 = CARTESIAN_POINT('',(1.274999999991,2.799999969662)); +#5178 = VECTOR('',#5179,1.); +#5179 = DIRECTION('',(-1.,-4.17258820088E-15)); +#5180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5181 = PCURVE('',#4470,#5182); +#5182 = DEFINITIONAL_REPRESENTATION('',(#5183),#5187); +#5183 = LINE('',#5184,#5185); +#5184 = CARTESIAN_POINT('',(-4.6,-1.274999999991)); +#5185 = VECTOR('',#5186,1.); +#5186 = DIRECTION('',(-7.230327447882E-15,-1.)); +#5187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5188 = ADVANCED_FACE('',(#5189),#3109,.F.); +#5189 = FACE_BOUND('',#5190,.T.); +#5190 = EDGE_LOOP('',(#5191,#5192,#5193,#5216)); +#5191 = ORIENTED_EDGE('',*,*,#5046,.F.); +#5192 = ORIENTED_EDGE('',*,*,#3092,.F.); +#5193 = ORIENTED_EDGE('',*,*,#5194,.F.); +#5194 = EDGE_CURVE('',#5195,#3064,#5197,.T.); +#5195 = VERTEX_POINT('',#5196); +#5196 = CARTESIAN_POINT('',(-24.75963524147,38.086891523071, + -27.65704862529)); +#5197 = SURFACE_CURVE('',#5198,(#5202,#5209),.PCURVE_S1.); +#5198 = LINE('',#5199,#5200); +#5199 = CARTESIAN_POINT('',(-24.75963524147,49.836891800137, + -27.65704862529)); +#5200 = VECTOR('',#5201,1.); +#5201 = DIRECTION('',(-0.,-1.,-0.)); +#5202 = PCURVE('',#3109,#5203); +#5203 = DEFINITIONAL_REPRESENTATION('',(#5204),#5208); +#5204 = LINE('',#5205,#5206); +#5205 = CARTESIAN_POINT('',(1.214321307094,-0.)); +#5206 = VECTOR('',#5207,1.); +#5207 = DIRECTION('',(-0.,1.)); +#5208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5209 = PCURVE('',#3080,#5210); +#5210 = DEFINITIONAL_REPRESENTATION('',(#5211),#5215); +#5211 = LINE('',#5212,#5213); +#5212 = CARTESIAN_POINT('',(-5.425339019786,0.)); +#5213 = VECTOR('',#5214,1.); +#5214 = DIRECTION('',(-0.,1.)); +#5215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5216 = ORIENTED_EDGE('',*,*,#5217,.F.); +#5217 = EDGE_CURVE('',#5047,#5195,#5218,.T.); +#5218 = SURFACE_CURVE('',#5219,(#5224,#5231),.PCURVE_S1.); +#5219 = CIRCLE('',#5220,0.5); +#5220 = AXIS2_PLACEMENT_3D('',#5221,#5222,#5223); +#5221 = CARTESIAN_POINT('',(-25.08666930589,38.08689152307, + -28.03526644707)); +#5222 = DIRECTION('',(-2.22044604925E-14,-1.,-2.97677927091E-30)); +#5223 = DIRECTION('',(0.937132766358,-2.080852748683E-14,-0.348973033654 + )); +#5224 = PCURVE('',#3109,#5225); +#5225 = DEFINITIONAL_REPRESENTATION('',(#5226),#5230); +#5226 = LINE('',#5227,#5228); +#5227 = CARTESIAN_POINT('',(-6.28318530718,11.750000277067)); +#5228 = VECTOR('',#5229,1.); +#5229 = DIRECTION('',(1.,2.925678449406E-15)); +#5230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5231 = PCURVE('',#4470,#5232); +#5232 = DEFINITIONAL_REPRESENTATION('',(#5233),#5237); +#5233 = CIRCLE('',#5234,0.5); +#5234 = AXIS2_PLACEMENT_2D('',#5235,#5236); +#5235 = CARTESIAN_POINT('',(-5.1,-21.39616050567)); +#5236 = DIRECTION('',(0.348973033654,0.937132766358)); +#5237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5238 = ADVANCED_FACE('',(#5239),#3080,.T.); +#5239 = FACE_BOUND('',#5240,.F.); +#5240 = EDGE_LOOP('',(#5241,#5264,#5265,#5266,#5290,#5313,#5337,#5360)); +#5241 = ORIENTED_EDGE('',*,*,#5242,.F.); +#5242 = EDGE_CURVE('',#3031,#5243,#5245,.T.); +#5243 = VERTEX_POINT('',#5244); +#5244 = CARTESIAN_POINT('',(-36.72762880027,49.836891800137, + -12.29558750517)); +#5245 = SURFACE_CURVE('',#5246,(#5250,#5257),.PCURVE_S1.); +#5246 = LINE('',#5247,#5248); +#5247 = CARTESIAN_POINT('',(-36.72762880027,49.836891800137, + -12.29558750517)); +#5248 = VECTOR('',#5249,1.); +#5249 = DIRECTION('',(-0.,1.,-0.)); +#5250 = PCURVE('',#3080,#5251); +#5251 = DEFINITIONAL_REPRESENTATION('',(#5252),#5256); +#5252 = LINE('',#5253,#5254); +#5253 = CARTESIAN_POINT('',(-5.817308407074,0.)); +#5254 = VECTOR('',#5255,1.); +#5255 = DIRECTION('',(-0.,-1.)); +#5256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5257 = PCURVE('',#3051,#5258); +#5258 = DEFINITIONAL_REPRESENTATION('',(#5259),#5263); +#5259 = LINE('',#5260,#5261); +#5260 = CARTESIAN_POINT('',(-0.232938450053,0.)); +#5261 = VECTOR('',#5262,1.); +#5262 = DIRECTION('',(1.006333405354E-15,1.)); +#5263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5264 = ORIENTED_EDGE('',*,*,#3063,.F.); +#5265 = ORIENTED_EDGE('',*,*,#5194,.F.); +#5266 = ORIENTED_EDGE('',*,*,#5267,.T.); +#5267 = EDGE_CURVE('',#5195,#5268,#5270,.T.); +#5268 = VERTEX_POINT('',#5269); +#5269 = CARTESIAN_POINT('',(-23.71550880021,38.086891523071, + -28.53526644707)); +#5270 = SURFACE_CURVE('',#5271,(#5276,#5283),.PCURVE_S1.); +#5271 = CIRCLE('',#5272,50.); +#5272 = AXIS2_PLACEMENT_3D('',#5273,#5274,#5275); +#5273 = CARTESIAN_POINT('',(7.943771199799,38.08689152307, + 10.164733552925)); +#5274 = DIRECTION('',(-2.22044604925E-14,-1.,-1.242186492284E-30)); +#5275 = DIRECTION('',(-1.,2.22044604925E-14,-2.829680934012E-14)); +#5276 = PCURVE('',#3080,#5277); +#5277 = DEFINITIONAL_REPRESENTATION('',(#5278),#5282); +#5278 = LINE('',#5279,#5280); +#5279 = CARTESIAN_POINT('',(-6.28318530718,11.750000277065)); +#5280 = VECTOR('',#5281,1.); +#5281 = DIRECTION('',(1.,7.811606683138E-13)); +#5282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5283 = PCURVE('',#4470,#5284); +#5284 = DEFINITIONAL_REPRESENTATION('',(#5285),#5289); +#5285 = CIRCLE('',#5286,50.); +#5286 = AXIS2_PLACEMENT_2D('',#5287,#5288); +#5287 = CARTESIAN_POINT('',(-43.29999999999,11.634280000016)); +#5288 = DIRECTION('',(2.828293155231E-14,-1.)); +#5289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5290 = ORIENTED_EDGE('',*,*,#5291,.F.); +#5291 = EDGE_CURVE('',#5292,#5268,#5294,.T.); +#5292 = VERTEX_POINT('',#5293); +#5293 = CARTESIAN_POINT('',(-23.71550880021,43.686891523071, + -28.53526644707)); +#5294 = SURFACE_CURVE('',#5295,(#5299,#5306),.PCURVE_S1.); +#5295 = LINE('',#5296,#5297); +#5296 = CARTESIAN_POINT('',(-23.71550864039,49.836891800137, + -28.53526644707)); +#5297 = VECTOR('',#5298,1.); +#5298 = DIRECTION('',(-0.,-1.,-0.)); +#5299 = PCURVE('',#3080,#5300); +#5300 = DEFINITIONAL_REPRESENTATION('',(#5301),#5305); +#5301 = LINE('',#5302,#5303); +#5302 = CARTESIAN_POINT('',(-5.398051056029,0.)); +#5303 = VECTOR('',#5304,1.); +#5304 = DIRECTION('',(-0.,1.)); +#5305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5306 = PCURVE('',#4442,#5307); +#5307 = DEFINITIONAL_REPRESENTATION('',(#5308),#5312); +#5308 = LINE('',#5309,#5310); +#5309 = CARTESIAN_POINT('',(2.734500277066,-4.6)); +#5310 = VECTOR('',#5311,1.); +#5311 = DIRECTION('',(-1.,1.189244560643E-14)); +#5312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5313 = ORIENTED_EDGE('',*,*,#5314,.T.); +#5314 = EDGE_CURVE('',#5292,#5315,#5317,.T.); +#5315 = VERTEX_POINT('',#5316); +#5316 = CARTESIAN_POINT('',(-24.75963524147,43.686891523071, + -27.65704862529)); +#5317 = SURFACE_CURVE('',#5318,(#5323,#5330),.PCURVE_S1.); +#5318 = CIRCLE('',#5319,50.); +#5319 = AXIS2_PLACEMENT_3D('',#5320,#5321,#5322); +#5320 = CARTESIAN_POINT('',(7.943771199799,43.686891523071, + 10.164733552925)); +#5321 = DIRECTION('',(1.803187229162E-14,1.,5.871122787574E-15)); +#5322 = DIRECTION('',(-1.,1.803187229162E-14,-2.829680934012E-14)); +#5323 = PCURVE('',#3080,#5324); +#5324 = DEFINITIONAL_REPRESENTATION('',(#5325),#5329); +#5325 = LINE('',#5326,#5327); +#5326 = CARTESIAN_POINT('',(-0.,6.150000277068)); +#5327 = VECTOR('',#5328,1.); +#5328 = DIRECTION('',(-1.,-5.207737788759E-13)); +#5329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5330 = PCURVE('',#4524,#5331); +#5331 = DEFINITIONAL_REPRESENTATION('',(#5332),#5336); +#5332 = CIRCLE('',#5333,50.); +#5333 = AXIS2_PLACEMENT_2D('',#5334,#5335); +#5334 = CARTESIAN_POINT('',(13.634280000016,-43.29999999999)); +#5335 = DIRECTION('',(-1.,5.2735593668E-16)); +#5336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5337 = ORIENTED_EDGE('',*,*,#5338,.F.); +#5338 = EDGE_CURVE('',#5339,#5315,#5341,.T.); +#5339 = VERTEX_POINT('',#5340); +#5340 = CARTESIAN_POINT('',(-24.75963524147,49.836891800136, + -27.65704862529)); +#5341 = SURFACE_CURVE('',#5342,(#5346,#5353),.PCURVE_S1.); +#5342 = LINE('',#5343,#5344); +#5343 = CARTESIAN_POINT('',(-24.75963524147,49.836891800137, + -27.65704862529)); +#5344 = VECTOR('',#5345,1.); +#5345 = DIRECTION('',(-0.,-1.,-0.)); +#5346 = PCURVE('',#3080,#5347); +#5347 = DEFINITIONAL_REPRESENTATION('',(#5348),#5352); +#5348 = LINE('',#5349,#5350); +#5349 = CARTESIAN_POINT('',(-5.425339019786,0.)); +#5350 = VECTOR('',#5351,1.); +#5351 = DIRECTION('',(-0.,1.)); +#5352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5353 = PCURVE('',#5110,#5354); +#5354 = DEFINITIONAL_REPRESENTATION('',(#5355),#5359); +#5355 = LINE('',#5356,#5357); +#5356 = CARTESIAN_POINT('',(1.214321307094,-0.)); +#5357 = VECTOR('',#5358,1.); +#5358 = DIRECTION('',(-0.,1.)); +#5359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5360 = ORIENTED_EDGE('',*,*,#5361,.F.); +#5361 = EDGE_CURVE('',#5243,#5339,#5362,.T.); +#5362 = SURFACE_CURVE('',#5363,(#5368,#5375),.PCURVE_S1.); +#5363 = CIRCLE('',#5364,50.); +#5364 = AXIS2_PLACEMENT_3D('',#5365,#5366,#5367); +#5365 = CARTESIAN_POINT('',(7.943771199799,49.836891800137, + 10.164733552925)); +#5366 = DIRECTION('',(3.228414021756E-15,-1.,2.369891979405E-14)); +#5367 = DIRECTION('',(-1.,-3.228414021757E-15,-2.829680934012E-14)); +#5368 = PCURVE('',#3080,#5369); +#5369 = DEFINITIONAL_REPRESENTATION('',(#5370),#5374); +#5370 = LINE('',#5371,#5372); +#5371 = CARTESIAN_POINT('',(-6.28318530718,-5.12823545241E-13)); +#5372 = VECTOR('',#5373,1.); +#5373 = DIRECTION('',(1.,8.338652686902E-13)); +#5374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5375 = PCURVE('',#3390,#5376); +#5376 = DEFINITIONAL_REPRESENTATION('',(#5377),#5381); +#5377 = CIRCLE('',#5378,50.); +#5378 = AXIS2_PLACEMENT_2D('',#5379,#5380); +#5379 = CARTESIAN_POINT('',(-22.93409410135,-16.005)); +#5380 = DIRECTION('',(1.,2.88790530513E-14)); +#5381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5382 = ADVANCED_FACE('',(#5383,#5436),#3051,.T.); +#5383 = FACE_BOUND('',#5384,.F.); +#5384 = EDGE_LOOP('',(#5385,#5413,#5434,#5435)); +#5385 = ORIENTED_EDGE('',*,*,#5386,.T.); +#5386 = EDGE_CURVE('',#5243,#5387,#5389,.T.); +#5387 = VERTEX_POINT('',#5388); +#5388 = CARTESIAN_POINT('',(-40.99050880019,49.836891800138, + 5.672669341304)); +#5389 = SURFACE_CURVE('',#5390,(#5395,#5402),.PCURVE_S1.); +#5390 = CIRCLE('',#5391,40.); +#5391 = AXIS2_PLACEMENT_3D('',#5392,#5393,#5394); +#5392 = CARTESIAN_POINT('',(-0.990508800216,49.836891800138, + 5.672669341304)); +#5393 = DIRECTION('',(-3.228414021756E-15,1.,-2.369891979405E-14)); +#5394 = DIRECTION('',(-0.972992291851,-8.611823850434E-15, + -0.230837605254)); +#5395 = PCURVE('',#3051,#5396); +#5396 = DEFINITIONAL_REPRESENTATION('',(#5397),#5401); +#5397 = LINE('',#5398,#5399); +#5398 = CARTESIAN_POINT('',(-6.28318530718,4.475889843654E-12)); +#5399 = VECTOR('',#5400,1.); +#5400 = DIRECTION('',(1.,-6.634501302507E-13)); +#5401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5402 = PCURVE('',#3390,#5403); +#5403 = DEFINITIONAL_REPRESENTATION('',(#5404),#5412); +#5404 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5405,#5406,#5407,#5408, +#5409,#5410,#5411),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5405 = CARTESIAN_POINT('',(24.919877572679,-2.279431578223)); +#5406 = CARTESIAN_POINT('',(40.912775996571,-69.69031497254)); +#5407 = CARTESIAN_POINT('',(-25.46321072641,-49.83512959061)); +#5408 = CARTESIAN_POINT('',(-91.83919744939,-29.97994420869)); +#5409 = CARTESIAN_POINT('',(-41.4561091503,17.575753803705)); +#5410 = CARTESIAN_POINT('',(8.926979148788,65.131451816101)); +#5411 = CARTESIAN_POINT('',(24.919877572679,-2.279431578223)); +#5412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5413 = ORIENTED_EDGE('',*,*,#5414,.T.); +#5414 = EDGE_CURVE('',#5387,#3003,#5415,.T.); +#5415 = SURFACE_CURVE('',#5416,(#5420,#5427),.PCURVE_S1.); +#5416 = LINE('',#5417,#5418); +#5417 = CARTESIAN_POINT('',(-40.99050880021,49.836891800137, + 5.672669341304)); +#5418 = VECTOR('',#5419,1.); +#5419 = DIRECTION('',(-1.803187229162E-14,-1.,3.586364494993E-14)); +#5420 = PCURVE('',#3051,#5421); +#5421 = DEFINITIONAL_REPRESENTATION('',(#5422),#5426); +#5422 = LINE('',#5423,#5424); +#5423 = CARTESIAN_POINT('',(0.232938450053,-2.131628207311E-14)); +#5424 = VECTOR('',#5425,1.); +#5425 = DIRECTION('',(-0.,-1.)); +#5426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5427 = PCURVE('',#3018,#5428); +#5428 = DEFINITIONAL_REPRESENTATION('',(#5429),#5433); +#5429 = LINE('',#5430,#5431); +#5430 = CARTESIAN_POINT('',(2.734500277066,-38.80793578837)); +#5431 = VECTOR('',#5432,1.); +#5432 = DIRECTION('',(-1.,-2.39711993435E-14)); +#5433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5434 = ORIENTED_EDGE('',*,*,#3030,.T.); +#5435 = ORIENTED_EDGE('',*,*,#5242,.T.); +#5436 = FACE_BOUND('',#5437,.F.); +#5437 = EDGE_LOOP('',(#5438,#5623)); +#5438 = ORIENTED_EDGE('',*,*,#5439,.T.); +#5439 = EDGE_CURVE('',#4038,#4036,#5440,.T.); +#5440 = SURFACE_CURVE('',#5441,(#5477,#5550),.PCURVE_S1.); +#5441 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#5442,#5443,#5444,#5445,#5446, + #5447,#5448,#5449,#5450,#5451,#5452,#5453,#5454,#5455,#5456,#5457, + #5458,#5459,#5460,#5461,#5462,#5463,#5464,#5465,#5466,#5467,#5468, + #5469,#5470,#5471,#5472,#5473,#5474,#5475,#5476),.UNSPECIFIED.,.F., + .F.,(4,2,2,2,2,2,2,2,3,2,2,2,2,2,2,2,4),(1.015818142777,1.048257812059 + ,1.163130823689,1.282596614332,1.402062404974,1.519738345318, + 1.637414285663,1.75209194326,1.866769600857,1.981447258455, + 2.096124916052,2.213800856396,2.331476796741,2.450942587383, + 2.570408378025,2.685281389656,2.717721058938),.UNSPECIFIED.); +#5442 = CARTESIAN_POINT('',(-38.99050880019,40.046937366689, + -6.817326655553)); +#5443 = CARTESIAN_POINT('',(-39.00080012264,39.937639974611, + -6.786015976743)); +#5444 = CARTESIAN_POINT('',(-39.01309566352,39.829794390572, + -6.748480690474)); +#5445 = CARTESIAN_POINT('',(-39.07718156018,39.352015795179, + -6.55154590437)); +#5446 = CARTESIAN_POINT('',(-39.15101626631,39.013602387406, + -6.321126872507)); +#5447 = CARTESIAN_POINT('',(-39.31538374928,38.469487656993, + -5.785323235045)); +#5448 = CARTESIAN_POINT('',(-39.41789294016,38.231032393317, + -5.439953299781)); +#5449 = CARTESIAN_POINT('',(-39.62867497088,37.91472692428, + -4.683311962041)); +#5450 = CARTESIAN_POINT('',(-39.7366456401,37.836891492734, + -4.271950239023)); +#5451 = CARTESIAN_POINT('',(-39.92552775989,37.836891492734, + -3.504375996437)); +#5452 = CARTESIAN_POINT('',(-40.01952890203,37.912640983968, + -3.095724701971)); +#5453 = CARTESIAN_POINT('',(-40.18155175051,38.225440998789, + -2.340525816793)); +#5454 = CARTESIAN_POINT('',(-40.24988280027,38.462604646178, + -1.994091489173)); +#5455 = CARTESIAN_POINT('',(-40.35158664393,39.007636831461, + -1.453291089109)); +#5456 = CARTESIAN_POINT('',(-40.39237973133,39.348716492254, + -1.22059830815)); +#5457 = CARTESIAN_POINT('',(-40.44519592224,40.0972201115, + -0.911572126639)); +#5458 = CARTESIAN_POINT('',(-40.45754278776,40.504632634077, + -0.835266447075)); +#5459 = CARTESIAN_POINT('',(-40.45754278776,40.886891492734, + -0.835266447075)); +#5460 = CARTESIAN_POINT('',(-40.45754278776,41.269150351391, + -0.835266447075)); +#5461 = CARTESIAN_POINT('',(-40.44519592224,41.676562873967, + -0.911572126639)); +#5462 = CARTESIAN_POINT('',(-40.39237973133,42.425066493214, + -1.22059830815)); +#5463 = CARTESIAN_POINT('',(-40.35158664393,42.766146154007, + -1.453291089109)); +#5464 = CARTESIAN_POINT('',(-40.24988280027,43.311178339289, + -1.994091489173)); +#5465 = CARTESIAN_POINT('',(-40.18155175051,43.548341986679, + -2.340525816794)); +#5466 = CARTESIAN_POINT('',(-40.01952890203,43.8611420015, + -3.095724701971)); +#5467 = CARTESIAN_POINT('',(-39.92552775989,43.936891492734, + -3.504375996437)); +#5468 = CARTESIAN_POINT('',(-39.7366456401,43.936891492734, + -4.271950239024)); +#5469 = CARTESIAN_POINT('',(-39.62867497088,43.859056061188, + -4.683311962041)); +#5470 = CARTESIAN_POINT('',(-39.41789294016,43.54275059215, + -5.439953299781)); +#5471 = CARTESIAN_POINT('',(-39.31538374928,43.304295328474, + -5.785323235045)); +#5472 = CARTESIAN_POINT('',(-39.15101626631,42.760180598062, + -6.321126872507)); +#5473 = CARTESIAN_POINT('',(-39.07718156018,42.421767190288, + -6.55154590437)); +#5474 = CARTESIAN_POINT('',(-39.01309566352,41.943988594895, + -6.748480690474)); +#5475 = CARTESIAN_POINT('',(-39.00080012264,41.836143010856, + -6.786015976743)); +#5476 = CARTESIAN_POINT('',(-38.99050880019,41.726845618778, + -6.817326655553)); +#5477 = PCURVE('',#3051,#5478); +#5478 = DEFINITIONAL_REPRESENTATION('',(#5479),#5549); +#5479 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#5480,#5481,#5482,#5483,#5484, + #5485,#5486,#5487,#5488,#5489,#5490,#5491,#5492,#5493,#5494,#5495, + #5496,#5497,#5498,#5499,#5500,#5501,#5502,#5503,#5504,#5505,#5506, + #5507,#5508,#5509,#5510,#5511,#5512,#5513,#5514,#5515,#5516,#5517, + #5518,#5519,#5520,#5521,#5522,#5523,#5524,#5525,#5526,#5527,#5528, + #5529,#5530,#5531,#5532,#5533,#5534,#5535,#5536,#5537,#5538,#5539, + #5540,#5541,#5542,#5543,#5544,#5545,#5546,#5547,#5548), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,4),(1.015818142777,1.041604550597,1.067390958418, + 1.093177366238,1.118963774059,1.14475018188,1.1705365897, + 1.196322997521,1.222109405342,1.247895813162,1.273682220983, + 1.299468628803,1.325255036624,1.351041444445,1.376827852265, + 1.402614260086,1.428400667907,1.454187075727,1.479973483548, + 1.505759891369,1.531546299189,1.55733270701,1.58311911483, + 1.608905522651,1.634691930472,1.660478338292,1.686264746113, + 1.712051153934,1.737837561754,1.763623969575,1.789410377395, + 1.815196785216,1.840983193037,1.866769600857,1.892556008678, + 1.918342416499,1.944128824319,1.96991523214,1.995701639961, + 2.021488047781,2.047274455602,2.073060863422,2.098847271243, + 2.124633679064,2.150420086884,2.176206494705,2.201992902526, + 2.227779310346,2.253565718167,2.279352125987,2.305138533808, + 2.330924941629,2.356711349449,2.38249775727,2.408284165091, + 2.434070572911,2.459856980732,2.485643388552,2.511429796373, + 2.537216204194,2.563002612014,2.588789019835,2.614575427656, + 2.640361835476,2.666148243297,2.691934651118,2.717721058938), + .UNSPECIFIED.); +#5480 = CARTESIAN_POINT('',(-8.462197924042E-02,-9.789954433448)); +#5481 = CARTESIAN_POINT('',(-8.396919139856E-02,-9.876889666413)); +#5482 = CARTESIAN_POINT('',(-8.24507377356E-02,-10.04876064534)); +#5483 = CARTESIAN_POINT('',(-7.958414898083E-02,-10.29751017649)); +#5484 = CARTESIAN_POINT('',(-7.615959586943E-02,-10.53393646741)); +#5485 = CARTESIAN_POINT('',(-7.227375851313E-02,-10.75550060855)); +#5486 = CARTESIAN_POINT('',(-6.798783100808E-02,-10.96025486307)); +#5487 = CARTESIAN_POINT('',(-6.344571657422E-02,-11.14324464729)); +#5488 = CARTESIAN_POINT('',(-5.842775169415E-02,-11.31362287891)); +#5489 = CARTESIAN_POINT('',(-5.296351192368E-02,-11.4701793353)); +#5490 = CARTESIAN_POINT('',(-4.712534475711E-02,-11.61005447466)); +#5491 = CARTESIAN_POINT('',(-4.097484459784E-02,-11.73092008951)); +#5492 = CARTESIAN_POINT('',(-3.45734412163E-02,-11.82997195429)); +#5493 = CARTESIAN_POINT('',(-2.80008383538E-02,-11.90651440614)); +#5494 = CARTESIAN_POINT('',(-2.13539227171E-02,-11.96089497737)); +#5495 = CARTESIAN_POINT('',(-1.470332938647E-02,-11.99320692024)); +#5496 = CARTESIAN_POINT('',(-8.208758826655E-03,-12.00362820491)); +#5497 = CARTESIAN_POINT('',(-1.699264719843E-03,-11.99225211491)); +#5498 = CARTESIAN_POINT('',(4.955659097228E-03,-11.95873068158)); +#5499 = CARTESIAN_POINT('',(1.160054524835E-02,-11.90274685648)); +#5500 = CARTESIAN_POINT('',(1.815744774701E-02,-11.82406028507)); +#5501 = CARTESIAN_POINT('',(2.452420993737E-02,-11.722092917)); +#5502 = CARTESIAN_POINT('',(3.062080746437E-02,-11.59780396202)); +#5503 = CARTESIAN_POINT('',(3.638287454371E-02,-11.4542358577)); +#5504 = CARTESIAN_POINT('',(4.175257443751E-02,-11.29363006108)); +#5505 = CARTESIAN_POINT('',(4.663481700224E-02,-11.11984807686)); +#5506 = CARTESIAN_POINT('',(5.107659860761E-02,-10.93107219959)); +#5507 = CARTESIAN_POINT('',(5.522890187442E-02,-10.72098359045)); +#5508 = CARTESIAN_POINT('',(5.895782055254E-02,-10.49453774291)); +#5509 = CARTESIAN_POINT('',(6.220566561854E-02,-10.25379969692)); +#5510 = CARTESIAN_POINT('',(6.488557429542E-02,-10.00147871098)); +#5511 = CARTESIAN_POINT('',(6.69581783263E-02,-9.740718111366)); +#5512 = CARTESIAN_POINT('',(6.843518704031E-02,-9.475833221825)); +#5513 = CARTESIAN_POINT('',(6.931813776897E-02,-9.210066885863)); +#5514 = CARTESIAN_POINT('',(6.961129514639E-02,-8.950000307403)); +#5515 = CARTESIAN_POINT('',(6.931813776897E-02,-8.689933728944)); +#5516 = CARTESIAN_POINT('',(6.843518704031E-02,-8.424167392982)); +#5517 = CARTESIAN_POINT('',(6.695817832631E-02,-8.159282503441)); +#5518 = CARTESIAN_POINT('',(6.488557429543E-02,-7.898521903821)); +#5519 = CARTESIAN_POINT('',(6.220566561854E-02,-7.646200917881)); +#5520 = CARTESIAN_POINT('',(5.895782055255E-02,-7.405462871888)); +#5521 = CARTESIAN_POINT('',(5.522890187442E-02,-7.179017024353)); +#5522 = CARTESIAN_POINT('',(5.107659860761E-02,-6.968928415215)); +#5523 = CARTESIAN_POINT('',(4.663481700224E-02,-6.780152537942)); +#5524 = CARTESIAN_POINT('',(4.175257443752E-02,-6.606370553719)); +#5525 = CARTESIAN_POINT('',(3.638287454372E-02,-6.445764757098)); +#5526 = CARTESIAN_POINT('',(3.062080746438E-02,-6.302196652782)); +#5527 = CARTESIAN_POINT('',(2.452420993738E-02,-6.177907697806)); +#5528 = CARTESIAN_POINT('',(1.815744774702E-02,-6.07594032973)); +#5529 = CARTESIAN_POINT('',(1.160054524836E-02,-5.997253758322)); +#5530 = CARTESIAN_POINT('',(4.955659097239E-03,-5.941269933224)); +#5531 = CARTESIAN_POINT('',(-1.699264719833E-03,-5.907748499895)); +#5532 = CARTESIAN_POINT('',(-8.208758826645E-03,-5.896372409896)); +#5533 = CARTESIAN_POINT('',(-1.470332938645E-02,-5.906793694559)); +#5534 = CARTESIAN_POINT('',(-2.135392271709E-02,-5.939105637433)); +#5535 = CARTESIAN_POINT('',(-2.800083835379E-02,-5.993486208666)); +#5536 = CARTESIAN_POINT('',(-3.457344121629E-02,-6.07002866051)); +#5537 = CARTESIAN_POINT('',(-4.097484459783E-02,-6.169080525296)); +#5538 = CARTESIAN_POINT('',(-4.71253447571E-02,-6.289946140141)); +#5539 = CARTESIAN_POINT('',(-5.296351192367E-02,-6.429821279505)); +#5540 = CARTESIAN_POINT('',(-5.842775169414E-02,-6.586377735895)); +#5541 = CARTESIAN_POINT('',(-6.344571657421E-02,-6.756755967515)); +#5542 = CARTESIAN_POINT('',(-6.798783100807E-02,-6.939745751727)); +#5543 = CARTESIAN_POINT('',(-7.227375851313E-02,-7.144500006249)); +#5544 = CARTESIAN_POINT('',(-7.615959586943E-02,-7.366064147392)); +#5545 = CARTESIAN_POINT('',(-7.958414898083E-02,-7.602490438314)); +#5546 = CARTESIAN_POINT('',(-8.24507377356E-02,-7.851239969458)); +#5547 = CARTESIAN_POINT('',(-8.396919139856E-02,-8.023110948393)); +#5548 = CARTESIAN_POINT('',(-8.462197924042E-02,-8.110046181358)); +#5549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5550 = PCURVE('',#4075,#5551); +#5551 = DEFINITIONAL_REPRESENTATION('',(#5552),#5622); +#5552 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#5553,#5554,#5555,#5556,#5557, + #5558,#5559,#5560,#5561,#5562,#5563,#5564,#5565,#5566,#5567,#5568, + #5569,#5570,#5571,#5572,#5573,#5574,#5575,#5576,#5577,#5578,#5579, + #5580,#5581,#5582,#5583,#5584,#5585,#5586,#5587,#5588,#5589,#5590, + #5591,#5592,#5593,#5594,#5595,#5596,#5597,#5598,#5599,#5600,#5601, + #5602,#5603,#5604,#5605,#5606,#5607,#5608,#5609,#5610,#5611,#5612, + #5613,#5614,#5615,#5616,#5617,#5618,#5619,#5620,#5621), + .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,4),(1.015818142777,1.041604550597,1.067390958418, + 1.093177366238,1.118963774059,1.14475018188,1.1705365897, + 1.196322997521,1.222109405342,1.247895813162,1.273682220983, + 1.299468628803,1.325255036624,1.351041444445,1.376827852265, + 1.402614260086,1.428400667907,1.454187075727,1.479973483548, + 1.505759891369,1.531546299189,1.55733270701,1.58311911483, + 1.608905522651,1.634691930472,1.660478338292,1.686264746113, + 1.712051153934,1.737837561754,1.763623969575,1.789410377395, + 1.815196785216,1.840983193037,1.866769600857,1.892556008678, + 1.918342416499,1.944128824319,1.96991523214,1.995701639961, + 2.021488047781,2.047274455602,2.073060863422,2.098847271243, + 2.124633679064,2.150420086884,2.176206494705,2.201992902526, + 2.227779310346,2.253565718167,2.279352125987,2.305138533808, + 2.330924941629,2.356711349449,2.38249775727,2.408284165091, + 2.434070572911,2.459856980732,2.485643388552,2.511429796373, + 2.537216204194,2.563002612014,2.588789019835,2.614575427656, + 2.640361835476,2.666148243297,2.691934651118,2.717721058938), + .UNSPECIFIED.); +#5553 = CARTESIAN_POINT('',(2.862592299585,2.)); +#5554 = CARTESIAN_POINT('',(2.832954039765,1.991847426367)); +#5555 = CARTESIAN_POINT('',(2.773567720955,1.972927457134)); +#5556 = CARTESIAN_POINT('',(2.68460844318,1.937501293712)); +#5557 = CARTESIAN_POINT('',(2.596151286185,1.895607794208)); +#5558 = CARTESIAN_POINT('',(2.508815041919,1.848593672079)); +#5559 = CARTESIAN_POINT('',(2.422943246005,1.797390391259)); +#5560 = CARTESIAN_POINT('',(2.340317159503,1.743898005401)); +#5561 = CARTESIAN_POINT('',(2.25619621643,1.685762153187)); +#5562 = CARTESIAN_POINT('',(2.170493040879,1.623540264814)); +#5563 = CARTESIAN_POINT('',(2.083898107378,1.558294937265)); +#5564 = CARTESIAN_POINT('',(1.996859723905,1.490950340041)); +#5565 = CARTESIAN_POINT('',(1.909780015642,1.422479185792)); +#5566 = CARTESIAN_POINT('',(1.822932144656,1.353899550816)); +#5567 = CARTESIAN_POINT('',(1.736821409177,1.286169352774)); +#5568 = CARTESIAN_POINT('',(1.651730121751,1.220044195127)); +#5569 = CARTESIAN_POINT('',(1.569096669491,1.157117724196)); +#5570 = CARTESIAN_POINT('',(1.486115875806,1.095828697308)); +#5571 = CARTESIAN_POINT('',(1.400503855916,1.034860297574)); +#5572 = CARTESIAN_POINT('',(1.313640586292,0.975631634192)); +#5573 = CARTESIAN_POINT('',(1.225889260399,0.918806984947)); +#5574 = CARTESIAN_POINT('',(1.137767389799,0.865334027188)); +#5575 = CARTESIAN_POINT('',(1.049592783474,0.8156703218)); +#5576 = CARTESIAN_POINT('',(0.96188246497,0.770043347301)); +#5577 = CARTESIAN_POINT('',(0.875057511204,0.728667988336)); +#5578 = CARTESIAN_POINT('',(0.790271120077,0.692026437668)); +#5579 = CARTESIAN_POINT('',(0.706027892172,0.659544249471)); +#5580 = CARTESIAN_POINT('',(0.618819507603,0.629875844542)); +#5581 = CARTESIAN_POINT('',(0.530383163332,0.60379867556)); +#5582 = CARTESIAN_POINT('',(0.441067340614,0.581520994119)); +#5583 = CARTESIAN_POINT('',(0.351478984956,0.563471601833)); +#5584 = CARTESIAN_POINT('',(0.261961757331,0.549666509675)); +#5585 = CARTESIAN_POINT('',(0.173093799178,0.539949690688)); +#5586 = CARTESIAN_POINT('',(8.526967311659E-02,0.534214682256)); +#5587 = CARTESIAN_POINT('',(-4.138911435803E-13,0.532341677519)); +#5588 = CARTESIAN_POINT('',(-8.526967311641E-02,0.534214682256)); +#5589 = CARTESIAN_POINT('',(-0.173093799177,0.539949690688)); +#5590 = CARTESIAN_POINT('',(-0.26196175733,0.549666509675)); +#5591 = CARTESIAN_POINT('',(-0.351478984955,0.563471601833)); +#5592 = CARTESIAN_POINT('',(-0.441067340614,0.581520994119)); +#5593 = CARTESIAN_POINT('',(-0.530383163331,0.60379867556)); +#5594 = CARTESIAN_POINT('',(-0.618819507602,0.629875844542)); +#5595 = CARTESIAN_POINT('',(-0.706027892171,0.659544249471)); +#5596 = CARTESIAN_POINT('',(-0.790271120077,0.692026437668)); +#5597 = CARTESIAN_POINT('',(-0.875057511203,0.728667988336)); +#5598 = CARTESIAN_POINT('',(-0.961882464969,0.770043347301)); +#5599 = CARTESIAN_POINT('',(-1.049592783474,0.8156703218)); +#5600 = CARTESIAN_POINT('',(-1.137767389798,0.865334027188)); +#5601 = CARTESIAN_POINT('',(-1.225889260399,0.918806984947)); +#5602 = CARTESIAN_POINT('',(-1.313640586291,0.975631634192)); +#5603 = CARTESIAN_POINT('',(-1.400503855915,1.034860297574)); +#5604 = CARTESIAN_POINT('',(-1.486115875805,1.095828697308)); +#5605 = CARTESIAN_POINT('',(-1.56909666949,1.157117724196)); +#5606 = CARTESIAN_POINT('',(-1.65173012175,1.220044195127)); +#5607 = CARTESIAN_POINT('',(-1.736821409176,1.286169352774)); +#5608 = CARTESIAN_POINT('',(-1.822932144655,1.353899550816)); +#5609 = CARTESIAN_POINT('',(-1.909780015641,1.422479185792)); +#5610 = CARTESIAN_POINT('',(-1.996859723905,1.490950340041)); +#5611 = CARTESIAN_POINT('',(-2.083898107377,1.558294937265)); +#5612 = CARTESIAN_POINT('',(-2.170493040878,1.623540264814)); +#5613 = CARTESIAN_POINT('',(-2.256196216429,1.685762153187)); +#5614 = CARTESIAN_POINT('',(-2.340317159502,1.743898005401)); +#5615 = CARTESIAN_POINT('',(-2.422943246004,1.797390391259)); +#5616 = CARTESIAN_POINT('',(-2.508815041918,1.848593672079)); +#5617 = CARTESIAN_POINT('',(-2.596151286184,1.895607794208)); +#5618 = CARTESIAN_POINT('',(-2.684608443179,1.937501293712)); +#5619 = CARTESIAN_POINT('',(-2.773567720955,1.972927457134)); +#5620 = CARTESIAN_POINT('',(-2.832954039764,1.991847426368)); +#5621 = CARTESIAN_POINT('',(-2.862592299584,2.)); +#5622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5623 = ORIENTED_EDGE('',*,*,#4035,.T.); +#5624 = ADVANCED_FACE('',(#5625),#3018,.T.); +#5625 = FACE_BOUND('',#5626,.F.); +#5626 = EDGE_LOOP('',(#5627,#5650,#5651,#5652)); +#5627 = ORIENTED_EDGE('',*,*,#5628,.F.); +#5628 = EDGE_CURVE('',#2970,#5629,#5631,.T.); +#5629 = VERTEX_POINT('',#5630); +#5630 = CARTESIAN_POINT('',(-40.99050880019,49.836891800138, + 11.664733552925)); +#5631 = SURFACE_CURVE('',#5632,(#5636,#5643),.PCURVE_S1.); +#5632 = LINE('',#5633,#5634); +#5633 = CARTESIAN_POINT('',(-40.99050880021,43.994641507902, + 11.664733552925)); +#5634 = VECTOR('',#5635,1.); +#5635 = DIRECTION('',(1.803187229162E-14,1.,6.881608909096E-15)); +#5636 = PCURVE('',#3018,#5637); +#5637 = DEFINITIONAL_REPRESENTATION('',(#5638),#5642); +#5638 = LINE('',#5639,#5640); +#5639 = CARTESIAN_POINT('',(-3.10775001517,-44.79999999999)); +#5640 = VECTOR('',#5641,1.); +#5641 = DIRECTION('',(1.,-1.877405451553E-14)); +#5642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5643 = PCURVE('',#2990,#5644); +#5644 = DEFINITIONAL_REPRESENTATION('',(#5645),#5649); +#5645 = LINE('',#5646,#5647); +#5646 = CARTESIAN_POINT('',(-7.068583470577,-2.13162820728E-14)); +#5647 = VECTOR('',#5648,1.); +#5648 = DIRECTION('',(-1.426543502197E-16,1.)); +#5649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5650 = ORIENTED_EDGE('',*,*,#3002,.F.); +#5651 = ORIENTED_EDGE('',*,*,#5414,.F.); +#5652 = ORIENTED_EDGE('',*,*,#5653,.F.); +#5653 = EDGE_CURVE('',#5629,#5387,#5654,.T.); +#5654 = SURFACE_CURVE('',#5655,(#5659,#5666),.PCURVE_S1.); +#5655 = LINE('',#5656,#5657); +#5656 = CARTESIAN_POINT('',(-40.99050880019,49.836891800137, + -13.68776644707)); +#5657 = VECTOR('',#5658,1.); +#5658 = DIRECTION('',(-6.938893905327E-17,-2.369891979405E-14,-1.)); +#5659 = PCURVE('',#3018,#5660); +#5660 = DEFINITIONAL_REPRESENTATION('',(#5661),#5665); +#5661 = LINE('',#5662,#5663); +#5662 = CARTESIAN_POINT('',(2.734500277066,-19.4475)); +#5663 = VECTOR('',#5664,1.); +#5664 = DIRECTION('',(-1.180647418762E-14,1.)); +#5665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5666 = PCURVE('',#3390,#5667); +#5667 = DEFINITIONAL_REPRESENTATION('',(#5668),#5672); +#5668 = LINE('',#5669,#5670); +#5669 = CARTESIAN_POINT('',(26.00018589863,7.847499999995)); +#5670 = VECTOR('',#5671,1.); +#5671 = DIRECTION('',(-5.128547721241E-16,1.)); +#5672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5673 = ADVANCED_FACE('',(#5674),#2990,.T.); +#5674 = FACE_BOUND('',#5675,.F.); +#5675 = EDGE_LOOP('',(#5676,#5702,#5703,#5704)); +#5676 = ORIENTED_EDGE('',*,*,#5677,.T.); +#5677 = EDGE_CURVE('',#5629,#3352,#5678,.T.); +#5678 = SURFACE_CURVE('',#5679,(#5684,#5691),.PCURVE_S1.); +#5679 = CIRCLE('',#5680,1.); +#5680 = AXIS2_PLACEMENT_3D('',#5681,#5682,#5683); +#5681 = CARTESIAN_POINT('',(-39.99050880021,49.836891800138, + 11.664733552925)); +#5682 = DIRECTION('',(-3.228414021756E-15,1.,-2.369891979405E-14)); +#5683 = DIRECTION('',(-0.707106781187,1.447483344591E-14,0.707106781187) + ); +#5684 = PCURVE('',#2990,#5685); +#5685 = DEFINITIONAL_REPRESENTATION('',(#5686),#5690); +#5686 = LINE('',#5687,#5688); +#5687 = CARTESIAN_POINT('',(-12.56637061435,5.842250292236)); +#5688 = VECTOR('',#5689,1.); +#5689 = DIRECTION('',(1.,3.392591660228E-14)); +#5690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5691 = PCURVE('',#3390,#5692); +#5692 = DEFINITIONAL_REPRESENTATION('',(#5693),#5701); +#5693 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5694,#5695,#5696,#5697, +#5698,#5699,#5700),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5694 = CARTESIAN_POINT('',(25.707292679837,-18.21210678118)); +#5695 = CARTESIAN_POINT('',(24.482547808445,-19.43685165257)); +#5696 = CARTESIAN_POINT('',(24.034260072361,-17.7638190451)); +#5697 = CARTESIAN_POINT('',(23.585972336277,-16.09078643762)); +#5698 = CARTESIAN_POINT('',(25.259004943753,-16.53907417371)); +#5699 = CARTESIAN_POINT('',(26.932037551228,-16.98736190979)); +#5700 = CARTESIAN_POINT('',(25.707292679837,-18.21210678118)); +#5701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5702 = ORIENTED_EDGE('',*,*,#3351,.T.); +#5703 = ORIENTED_EDGE('',*,*,#2969,.T.); +#5704 = ORIENTED_EDGE('',*,*,#5628,.T.); +#5705 = ADVANCED_FACE('',(#5706),#2910,.T.); +#5706 = FACE_BOUND('',#5707,.F.); +#5707 = EDGE_LOOP('',(#5708,#5709,#5710,#5736)); +#5708 = ORIENTED_EDGE('',*,*,#2889,.T.); +#5709 = ORIENTED_EDGE('',*,*,#3487,.T.); +#5710 = ORIENTED_EDGE('',*,*,#5711,.T.); +#5711 = EDGE_CURVE('',#3488,#4175,#5712,.T.); +#5712 = SURFACE_CURVE('',#5713,(#5718,#5725),.PCURVE_S1.); +#5713 = CIRCLE('',#5714,1.); +#5714 = AXIS2_PLACEMENT_3D('',#5715,#5716,#5717); +#5715 = CARTESIAN_POINT('',(9.443771350028,49.836891800137, + -37.93526644707)); +#5716 = DIRECTION('',(-3.228414021756E-15,1.,-2.369891979405E-14)); +#5717 = DIRECTION('',(0.707106781187,-1.447483344589E-14,-0.707106781186 + )); +#5718 = PCURVE('',#2910,#5719); +#5719 = DEFINITIONAL_REPRESENTATION('',(#5720),#5724); +#5720 = LINE('',#5721,#5722); +#5721 = CARTESIAN_POINT('',(6.28318530718,1.600954099931)); +#5722 = VECTOR('',#5723,1.); +#5723 = DIRECTION('',(-1.,1.809382218788E-14)); +#5724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5725 = PCURVE('',#3390,#5726); +#5726 = DEFINITIONAL_REPRESENTATION('',(#5727),#5735); +#5727 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5728,#5729,#5730,#5731, +#5732,#5733,#5734),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5728 = CARTESIAN_POINT('',(-25.14120103277,32.802106781181)); +#5729 = CARTESIAN_POINT('',(-23.91645616138,34.026851652573)); +#5730 = CARTESIAN_POINT('',(-23.46816842529,32.353819045098)); +#5731 = CARTESIAN_POINT('',(-23.01988068921,30.680786437623)); +#5732 = CARTESIAN_POINT('',(-24.69291329669,31.129074173706)); +#5733 = CARTESIAN_POINT('',(-26.36594590416,31.577361909789)); +#5734 = CARTESIAN_POINT('',(-25.14120103277,32.802106781181)); +#5735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5736 = ORIENTED_EDGE('',*,*,#4174,.T.); +#5737 = ADVANCED_FACE('',(#5738),#3390,.F.); +#5738 = FACE_BOUND('',#5739,.T.); +#5739 = EDGE_LOOP('',(#5740,#5741,#5742,#5743,#5766,#5794,#5815,#5816, + #5817,#5818,#5819,#5820,#5842,#5843,#5844,#5845,#5846,#5847,#5870, + #5898)); +#5740 = ORIENTED_EDGE('',*,*,#3566,.T.); +#5741 = ORIENTED_EDGE('',*,*,#5711,.T.); +#5742 = ORIENTED_EDGE('',*,*,#4197,.F.); +#5743 = ORIENTED_EDGE('',*,*,#5744,.F.); +#5744 = EDGE_CURVE('',#5745,#4198,#5747,.T.); +#5745 = VERTEX_POINT('',#5746); +#5746 = CARTESIAN_POINT('',(-14.,49.836891800137,-33.9353)); +#5747 = SURFACE_CURVE('',#5748,(#5752,#5759),.PCURVE_S1.); +#5748 = LINE('',#5749,#5750); +#5749 = CARTESIAN_POINT('',(-14.,49.836891800137,-22.38778322353)); +#5750 = VECTOR('',#5751,1.); +#5751 = DIRECTION('',(-0.,-2.369891979405E-14,-1.)); +#5752 = PCURVE('',#3390,#5753); +#5753 = DEFINITIONAL_REPRESENTATION('',(#5754),#5758); +#5754 = LINE('',#5755,#5756); +#5755 = CARTESIAN_POINT('',(-0.99032290156,16.547516776455)); +#5756 = VECTOR('',#5757,1.); +#5757 = DIRECTION('',(-5.822437111773E-16,1.)); +#5758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5759 = PCURVE('',#4236,#5760); +#5760 = DEFINITIONAL_REPRESENTATION('',(#5761),#5765); +#5761 = LINE('',#5762,#5763); +#5762 = CARTESIAN_POINT('',(-16.54751677647,-2.436908199863)); +#5763 = VECTOR('',#5764,1.); +#5764 = DIRECTION('',(1.,-2.369891979405E-14)); +#5765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5766 = ORIENTED_EDGE('',*,*,#5767,.F.); +#5767 = EDGE_CURVE('',#5768,#5745,#5770,.T.); +#5768 = VERTEX_POINT('',#5769); +#5769 = CARTESIAN_POINT('',(-26.,49.836891800137,-33.9353)); +#5770 = SURFACE_CURVE('',#5771,(#5775,#5782),.PCURVE_S1.); +#5771 = LINE('',#5772,#5773); +#5772 = CARTESIAN_POINT('',(-20.49516145078,49.836891800137,-33.9353)); +#5773 = VECTOR('',#5774,1.); +#5774 = DIRECTION('',(1.,3.228414021756E-15,-0.)); +#5775 = PCURVE('',#3390,#5776); +#5776 = DEFINITIONAL_REPRESENTATION('',(#5777),#5781); +#5777 = LINE('',#5778,#5779); +#5778 = CARTESIAN_POINT('',(5.50483854922,28.095033552925)); +#5779 = VECTOR('',#5780,1.); +#5780 = DIRECTION('',(-1.,-5.822437111774E-16)); +#5781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5782 = PCURVE('',#5783,#5788); +#5783 = PLANE('',#5784); +#5784 = AXIS2_PLACEMENT_3D('',#5785,#5786,#5787); +#5785 = CARTESIAN_POINT('',(-26.,52.2738,-33.9353)); +#5786 = DIRECTION('',(-0.,-0.,1.)); +#5787 = DIRECTION('',(-1.,0.,0.)); +#5788 = DEFINITIONAL_REPRESENTATION('',(#5789),#5793); +#5789 = LINE('',#5790,#5791); +#5790 = CARTESIAN_POINT('',(-5.50483854922,2.436908199863)); +#5791 = VECTOR('',#5792,1.); +#5792 = DIRECTION('',(-1.,-3.228414021756E-15)); +#5793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5794 = ORIENTED_EDGE('',*,*,#5795,.T.); +#5795 = EDGE_CURVE('',#5768,#4277,#5796,.T.); +#5796 = SURFACE_CURVE('',#5797,(#5801,#5808),.PCURVE_S1.); +#5797 = LINE('',#5798,#5799); +#5798 = CARTESIAN_POINT('',(-26.,49.836891800137,-22.38778322353)); +#5799 = VECTOR('',#5800,1.); +#5800 = DIRECTION('',(-0.,-2.369891979405E-14,-1.)); +#5801 = PCURVE('',#3390,#5802); +#5802 = DEFINITIONAL_REPRESENTATION('',(#5803),#5807); +#5803 = LINE('',#5804,#5805); +#5804 = CARTESIAN_POINT('',(11.00967709844,16.547516776455)); +#5805 = VECTOR('',#5806,1.); +#5806 = DIRECTION('',(-5.822437111773E-16,1.)); +#5807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5808 = PCURVE('',#4292,#5809); +#5809 = DEFINITIONAL_REPRESENTATION('',(#5810),#5814); +#5810 = LINE('',#5811,#5812); +#5811 = CARTESIAN_POINT('',(-16.54751677647,-2.436908199863)); +#5812 = VECTOR('',#5813,1.); +#5813 = DIRECTION('',(1.,-2.369891979405E-14)); +#5814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5815 = ORIENTED_EDGE('',*,*,#4304,.F.); +#5816 = ORIENTED_EDGE('',*,*,#4891,.T.); +#5817 = ORIENTED_EDGE('',*,*,#4944,.F.); +#5818 = ORIENTED_EDGE('',*,*,#4994,.T.); +#5819 = ORIENTED_EDGE('',*,*,#5071,.F.); +#5820 = ORIENTED_EDGE('',*,*,#5821,.T.); +#5821 = EDGE_CURVE('',#5072,#5339,#5822,.T.); +#5822 = SURFACE_CURVE('',#5823,(#5828,#5835),.PCURVE_S1.); +#5823 = CIRCLE('',#5824,0.5); +#5824 = AXIS2_PLACEMENT_3D('',#5825,#5826,#5827); +#5825 = CARTESIAN_POINT('',(-25.08666930589,49.836891800137, + -28.03526644707)); +#5826 = DIRECTION('',(3.228414021756E-15,-1.,2.369891979405E-14)); +#5827 = DIRECTION('',(0.937132766358,-5.244831371697E-15,-0.348973033654 + )); +#5828 = PCURVE('',#3390,#5829); +#5829 = DEFINITIONAL_REPRESENTATION('',(#5830),#5834); +#5830 = CIRCLE('',#5831,0.5); +#5831 = AXIS2_PLACEMENT_2D('',#5832,#5833); +#5832 = CARTESIAN_POINT('',(10.09634640433,22.194999999995)); +#5833 = DIRECTION('',(-0.937132766358,0.348973033654)); +#5834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5835 = PCURVE('',#5110,#5836); +#5836 = DEFINITIONAL_REPRESENTATION('',(#5837),#5841); +#5837 = LINE('',#5838,#5839); +#5838 = CARTESIAN_POINT('',(-6.28318530718,5.514773954046E-14)); +#5839 = VECTOR('',#5840,1.); +#5840 = DIRECTION('',(1.,-8.777035348218E-15)); +#5841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5842 = ORIENTED_EDGE('',*,*,#5361,.F.); +#5843 = ORIENTED_EDGE('',*,*,#5386,.T.); +#5844 = ORIENTED_EDGE('',*,*,#5653,.F.); +#5845 = ORIENTED_EDGE('',*,*,#5677,.T.); +#5846 = ORIENTED_EDGE('',*,*,#3374,.T.); +#5847 = ORIENTED_EDGE('',*,*,#5848,.F.); +#5848 = EDGE_CURVE('',#5849,#3375,#5851,.T.); +#5849 = VERTEX_POINT('',#5850); +#5850 = CARTESIAN_POINT('',(-36.0562288002,49.836891800138, + 10.164733552924)); +#5851 = SURFACE_CURVE('',#5852,(#5856,#5863),.PCURVE_S1.); +#5852 = LINE('',#5853,#5854); +#5853 = CARTESIAN_POINT('',(-36.0562288002,49.836891800138, + 10.164733552925)); +#5854 = VECTOR('',#5855,1.); +#5855 = DIRECTION('',(-0.,-8.881784197001E-15,1.)); +#5856 = PCURVE('',#3390,#5857); +#5857 = DEFINITIONAL_REPRESENTATION('',(#5858),#5862); +#5858 = LINE('',#5859,#5860); +#5859 = CARTESIAN_POINT('',(21.06590589864,-16.005)); +#5860 = VECTOR('',#5861,1.); +#5861 = DIRECTION('',(5.822437111774E-16,-1.)); +#5862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5863 = PCURVE('',#3418,#5864); +#5864 = DEFINITIONAL_REPRESENTATION('',(#5865),#5869); +#5865 = LINE('',#5866,#5867); +#5866 = CARTESIAN_POINT('',(-0.,0.)); +#5867 = VECTOR('',#5868,1.); +#5868 = DIRECTION('',(-1.088018502601E-14,1.)); +#5869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5870 = ORIENTED_EDGE('',*,*,#5871,.F.); +#5871 = EDGE_CURVE('',#5872,#5849,#5874,.T.); +#5872 = VERTEX_POINT('',#5873); +#5873 = CARTESIAN_POINT('',(7.943771350024,49.836891800137, + -33.83526644707)); +#5874 = SURFACE_CURVE('',#5875,(#5880,#5891),.PCURVE_S1.); +#5875 = CIRCLE('',#5876,44.); +#5876 = AXIS2_PLACEMENT_3D('',#5877,#5878,#5879); +#5877 = CARTESIAN_POINT('',(7.943771199795,49.836891800137, + 10.164733552925)); +#5878 = DIRECTION('',(-3.228414021756E-15,1.,-2.369891979405E-14)); +#5879 = DIRECTION('',(1.,3.228414021757E-15,2.831068712793E-14)); +#5880 = PCURVE('',#3390,#5881); +#5881 = DEFINITIONAL_REPRESENTATION('',(#5882),#5890); +#5882 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5883,#5884,#5885,#5886, +#5887,#5888,#5889),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5883 = CARTESIAN_POINT('',(-66.93409410135,-16.005)); +#5884 = CARTESIAN_POINT('',(-66.93409410135,60.205235533029)); +#5885 = CARTESIAN_POINT('',(-0.934094101356,22.100117766516)); +#5886 = CARTESIAN_POINT('',(65.065905898645,-16.00499999999)); +#5887 = CARTESIAN_POINT('',(-0.934094101354,-54.11011776651)); +#5888 = CARTESIAN_POINT('',(-66.93409410135,-92.21523553303)); +#5889 = CARTESIAN_POINT('',(-66.93409410135,-16.005)); +#5890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5891 = PCURVE('',#3758,#5892); +#5892 = DEFINITIONAL_REPRESENTATION('',(#5893),#5897); +#5893 = LINE('',#5894,#5895); +#5894 = CARTESIAN_POINT('',(2.22044604925E-16,-17.9000006148)); +#5895 = VECTOR('',#5896,1.); +#5896 = DIRECTION('',(-1.,-6.061430419765E-13)); +#5897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5898 = ORIENTED_EDGE('',*,*,#5899,.T.); +#5899 = EDGE_CURVE('',#5872,#3539,#5900,.T.); +#5900 = SURFACE_CURVE('',#5901,(#5905,#5912),.PCURVE_S1.); +#5901 = LINE('',#5902,#5903); +#5902 = CARTESIAN_POINT('',(7.943771350024,49.836891800137, + -33.83526644707)); +#5903 = VECTOR('',#5904,1.); +#5904 = DIRECTION('',(1.,-2.22044604925E-15,9.969802761134E-13)); +#5905 = PCURVE('',#3390,#5906); +#5906 = DEFINITIONAL_REPRESENTATION('',(#5907),#5911); +#5907 = LINE('',#5908,#5909); +#5908 = CARTESIAN_POINT('',(-22.93409425158,27.994999999995)); +#5909 = VECTOR('',#5910,1.); +#5910 = DIRECTION('',(-1.,-9.975625198246E-13)); +#5911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5912 = PCURVE('',#3554,#5913); +#5913 = DEFINITIONAL_REPRESENTATION('',(#5914),#5918); +#5914 = LINE('',#5915,#5916); +#5915 = CARTESIAN_POINT('',(-2.000000277066,2.693132285852E-15)); +#5916 = VECTOR('',#5917,1.); +#5917 = DIRECTION('',(3.567012005632E-15,1.)); +#5918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5919 = ADVANCED_FACE('',(#5920),#3418,.T.); +#5920 = FACE_BOUND('',#5921,.F.); +#5921 = EDGE_LOOP('',(#5922,#5923,#5924,#5925,#5926,#5947)); +#5922 = ORIENTED_EDGE('',*,*,#4147,.F.); +#5923 = ORIENTED_EDGE('',*,*,#4123,.F.); +#5924 = ORIENTED_EDGE('',*,*,#3402,.F.); +#5925 = ORIENTED_EDGE('',*,*,#5848,.F.); +#5926 = ORIENTED_EDGE('',*,*,#5927,.T.); +#5927 = EDGE_CURVE('',#5849,#3742,#5928,.T.); +#5928 = SURFACE_CURVE('',#5929,(#5933,#5940),.PCURVE_S1.); +#5929 = LINE('',#5930,#5931); +#5930 = CARTESIAN_POINT('',(-36.0562288002,31.936891185329, + 10.164733552925)); +#5931 = VECTOR('',#5932,1.); +#5932 = DIRECTION('',(1.346565956382E-15,-1.,1.798561679543E-16)); +#5933 = PCURVE('',#3418,#5934); +#5934 = DEFINITIONAL_REPRESENTATION('',(#5935),#5939); +#5935 = LINE('',#5936,#5937); +#5936 = CARTESIAN_POINT('',(-17.9000006148,-3.577137606788E-14)); +#5937 = VECTOR('',#5938,1.); +#5938 = DIRECTION('',(-1.,-1.818544661054E-15)); +#5939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5940 = PCURVE('',#3758,#5941); +#5941 = DEFINITIONAL_REPRESENTATION('',(#5942),#5946); +#5942 = LINE('',#5943,#5944); +#5943 = CARTESIAN_POINT('',(-3.14159265359,3.907985046681E-14)); +#5944 = VECTOR('',#5945,1.); +#5945 = DIRECTION('',(-0.,1.)); +#5946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5947 = ORIENTED_EDGE('',*,*,#3769,.T.); +#5948 = ADVANCED_FACE('',(#5949),#3554,.T.); +#5949 = FACE_BOUND('',#5950,.F.); +#5950 = EDGE_LOOP('',(#5951,#5952,#5973,#5974,#5975,#5976)); +#5951 = ORIENTED_EDGE('',*,*,#3694,.T.); +#5952 = ORIENTED_EDGE('',*,*,#5953,.T.); +#5953 = EDGE_CURVE('',#3695,#5872,#5954,.T.); +#5954 = SURFACE_CURVE('',#5955,(#5959,#5966),.PCURVE_S1.); +#5955 = LINE('',#5956,#5957); +#5956 = CARTESIAN_POINT('',(7.943771350024,31.936891185329, + -33.83526644707)); +#5957 = VECTOR('',#5958,1.); +#5958 = DIRECTION('',(-1.346565956382E-15,1.,-1.798561679543E-16)); +#5959 = PCURVE('',#3554,#5960); +#5960 = DEFINITIONAL_REPRESENTATION('',(#5961),#5965); +#5961 = LINE('',#5962,#5963); +#5962 = CARTESIAN_POINT('',(15.900000337742,-2.141039916127E-14)); +#5963 = VECTOR('',#5964,1.); +#5964 = DIRECTION('',(-1.,-4.44112763435E-32)); +#5965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5966 = PCURVE('',#3758,#5967); +#5967 = DEFINITIONAL_REPRESENTATION('',(#5968),#5972); +#5968 = LINE('',#5969,#5970); +#5969 = CARTESIAN_POINT('',(-1.570796323381,-7.105427357601E-15)); +#5970 = VECTOR('',#5971,1.); +#5971 = DIRECTION('',(-0.,-1.)); +#5972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5973 = ORIENTED_EDGE('',*,*,#5899,.T.); +#5974 = ORIENTED_EDGE('',*,*,#3538,.F.); +#5975 = ORIENTED_EDGE('',*,*,#3969,.T.); +#5976 = ORIENTED_EDGE('',*,*,#3945,.F.); +#5977 = ADVANCED_FACE('',(#5978),#3758,.F.); +#5978 = FACE_BOUND('',#5979,.T.); +#5979 = EDGE_LOOP('',(#5980,#5981,#5982,#5983)); +#5980 = ORIENTED_EDGE('',*,*,#5953,.T.); +#5981 = ORIENTED_EDGE('',*,*,#5871,.T.); +#5982 = ORIENTED_EDGE('',*,*,#5927,.T.); +#5983 = ORIENTED_EDGE('',*,*,#3741,.F.); +#5984 = ADVANCED_FACE('',(#5985),#4017,.F.); +#5985 = FACE_BOUND('',#5986,.T.); +#5986 = EDGE_LOOP('',(#5987,#6008,#6009,#6010)); +#5987 = ORIENTED_EDGE('',*,*,#5988,.T.); +#5988 = EDGE_CURVE('',#4539,#3997,#5989,.T.); +#5989 = SEAM_CURVE('',#5990,(#5994,#6001),.PCURVE_S1.); +#5990 = LINE('',#5991,#5992); +#5991 = CARTESIAN_POINT('',(-2.982837108069,40.886891492733, + -37.83526644706)); +#5992 = VECTOR('',#5993,1.); +#5993 = DIRECTION('',(-6.626431603857E-29,-2.442490654279E-15,1.)); +#5994 = PCURVE('',#4017,#5995); +#5995 = DEFINITIONAL_REPRESENTATION('',(#5996),#6000); +#5996 = LINE('',#5997,#5998); +#5997 = CARTESIAN_POINT('',(-9.424777960769,0.)); +#5998 = VECTOR('',#5999,1.); +#5999 = DIRECTION('',(-0.,1.)); +#6000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6001 = PCURVE('',#4017,#6002); +#6002 = DEFINITIONAL_REPRESENTATION('',(#6003),#6007); +#6003 = LINE('',#6004,#6005); +#6004 = CARTESIAN_POINT('',(-3.14159265359,0.)); +#6005 = VECTOR('',#6006,1.); +#6006 = DIRECTION('',(-0.,1.)); +#6007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6008 = ORIENTED_EDGE('',*,*,#3996,.F.); +#6009 = ORIENTED_EDGE('',*,*,#5988,.F.); +#6010 = ORIENTED_EDGE('',*,*,#4538,.T.); +#6011 = ADVANCED_FACE('',(#6012),#4075,.F.); +#6012 = FACE_BOUND('',#6013,.T.); +#6013 = EDGE_LOOP('',(#6014,#6015)); +#6014 = ORIENTED_EDGE('',*,*,#4060,.F.); +#6015 = ORIENTED_EDGE('',*,*,#5439,.T.); +#6016 = ADVANCED_FACE('',(#6017),#4388,.F.); +#6017 = FACE_BOUND('',#6018,.T.); +#6018 = EDGE_LOOP('',(#6019,#6020,#6041,#6042)); +#6019 = ORIENTED_EDGE('',*,*,#4565,.F.); +#6020 = ORIENTED_EDGE('',*,*,#6021,.F.); +#6021 = EDGE_CURVE('',#4817,#4566,#6022,.T.); +#6022 = SURFACE_CURVE('',#6023,(#6027,#6034),.PCURVE_S1.); +#6023 = LINE('',#6024,#6025); +#6024 = CARTESIAN_POINT('',(-26.,33.9738,-38.9353)); +#6025 = VECTOR('',#6026,1.); +#6026 = DIRECTION('',(1.,-0.,-0.)); +#6027 = PCURVE('',#4388,#6028); +#6028 = DEFINITIONAL_REPRESENTATION('',(#6029),#6033); +#6029 = LINE('',#6030,#6031); +#6030 = CARTESIAN_POINT('',(-0.,0.)); +#6031 = VECTOR('',#6032,1.); +#6032 = DIRECTION('',(-0.,1.)); +#6033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6034 = PCURVE('',#4604,#6035); +#6035 = DEFINITIONAL_REPRESENTATION('',(#6036),#6040); +#6036 = LINE('',#6037,#6038); +#6037 = CARTESIAN_POINT('',(-0.,-0.)); +#6038 = VECTOR('',#6039,1.); +#6039 = DIRECTION('',(-1.,0.)); +#6040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6041 = ORIENTED_EDGE('',*,*,#4816,.T.); +#6042 = ORIENTED_EDGE('',*,*,#4372,.T.); +#6043 = ADVANCED_FACE('',(#6044),#4292,.F.); +#6044 = FACE_BOUND('',#6045,.T.); +#6045 = EDGE_LOOP('',(#6046,#6069,#6097,#6125,#6146,#6147)); +#6046 = ORIENTED_EDGE('',*,*,#6047,.F.); +#6047 = EDGE_CURVE('',#6048,#5768,#6050,.T.); +#6048 = VERTEX_POINT('',#6049); +#6049 = CARTESIAN_POINT('',(-26.,60.1369,-33.9353)); +#6050 = SURFACE_CURVE('',#6051,(#6055,#6062),.PCURVE_S1.); +#6051 = LINE('',#6052,#6053); +#6052 = CARTESIAN_POINT('',(-26.,60.1369,-33.9353)); +#6053 = VECTOR('',#6054,1.); +#6054 = DIRECTION('',(-0.,-1.,-0.)); +#6055 = PCURVE('',#4292,#6056); +#6056 = DEFINITIONAL_REPRESENTATION('',(#6057),#6061); +#6057 = LINE('',#6058,#6059); +#6058 = CARTESIAN_POINT('',(-5.,7.8631)); +#6059 = VECTOR('',#6060,1.); +#6060 = DIRECTION('',(-0.,-1.)); +#6061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6062 = PCURVE('',#5783,#6063); +#6063 = DEFINITIONAL_REPRESENTATION('',(#6064),#6068); +#6064 = LINE('',#6065,#6066); +#6065 = CARTESIAN_POINT('',(-0.,-7.8631)); +#6066 = VECTOR('',#6067,1.); +#6067 = DIRECTION('',(-0.,1.)); +#6068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6069 = ORIENTED_EDGE('',*,*,#6070,.F.); +#6070 = EDGE_CURVE('',#6071,#6048,#6073,.T.); +#6071 = VERTEX_POINT('',#6072); +#6072 = CARTESIAN_POINT('',(-26.,60.1369,-38.9353)); +#6073 = SURFACE_CURVE('',#6074,(#6078,#6085),.PCURVE_S1.); +#6074 = LINE('',#6075,#6076); +#6075 = CARTESIAN_POINT('',(-26.,60.1369,-38.9353)); +#6076 = VECTOR('',#6077,1.); +#6077 = DIRECTION('',(-0.,-0.,1.)); +#6078 = PCURVE('',#4292,#6079); +#6079 = DEFINITIONAL_REPRESENTATION('',(#6080),#6084); +#6080 = LINE('',#6081,#6082); +#6081 = CARTESIAN_POINT('',(-0.,7.8631)); +#6082 = VECTOR('',#6083,1.); +#6083 = DIRECTION('',(-1.,0.)); +#6084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6085 = PCURVE('',#6086,#6091); +#6086 = CYLINDRICAL_SURFACE('',#6087,1.7); +#6087 = AXIS2_PLACEMENT_3D('',#6088,#6089,#6090); +#6088 = CARTESIAN_POINT('',(-24.3,60.1369,-38.9353)); +#6089 = DIRECTION('',(-0.,-0.,1.)); +#6090 = DIRECTION('',(-1.,-0.,0.)); +#6091 = DEFINITIONAL_REPRESENTATION('',(#6092),#6096); +#6092 = LINE('',#6093,#6094); +#6093 = CARTESIAN_POINT('',(-0.,0.)); +#6094 = VECTOR('',#6095,1.); +#6095 = DIRECTION('',(-0.,1.)); +#6096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6097 = ORIENTED_EDGE('',*,*,#6098,.F.); +#6098 = EDGE_CURVE('',#6099,#6071,#6101,.T.); +#6099 = VERTEX_POINT('',#6100); +#6100 = CARTESIAN_POINT('',(-26.,47.7738,-38.9353)); +#6101 = SURFACE_CURVE('',#6102,(#6106,#6113),.PCURVE_S1.); +#6102 = LINE('',#6103,#6104); +#6103 = CARTESIAN_POINT('',(-26.,47.7738,-38.9353)); +#6104 = VECTOR('',#6105,1.); +#6105 = DIRECTION('',(-0.,1.,-0.)); +#6106 = PCURVE('',#4292,#6107); +#6107 = DEFINITIONAL_REPRESENTATION('',(#6108),#6112); +#6108 = LINE('',#6109,#6110); +#6109 = CARTESIAN_POINT('',(-0.,-4.5)); +#6110 = VECTOR('',#6111,1.); +#6111 = DIRECTION('',(-0.,1.)); +#6112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6113 = PCURVE('',#6114,#6119); +#6114 = PLANE('',#6115); +#6115 = AXIS2_PLACEMENT_3D('',#6116,#6117,#6118); +#6116 = CARTESIAN_POINT('',(-26.,52.2738,-38.9353)); +#6117 = DIRECTION('',(-0.,-0.,1.)); +#6118 = DIRECTION('',(-1.,0.,0.)); +#6119 = DEFINITIONAL_REPRESENTATION('',(#6120),#6124); +#6120 = LINE('',#6121,#6122); +#6121 = CARTESIAN_POINT('',(-0.,4.5)); +#6122 = VECTOR('',#6123,1.); +#6123 = DIRECTION('',(-0.,-1.)); +#6124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6125 = ORIENTED_EDGE('',*,*,#6126,.T.); +#6126 = EDGE_CURVE('',#6099,#4249,#6127,.T.); +#6127 = SURFACE_CURVE('',#6128,(#6132,#6139),.PCURVE_S1.); +#6128 = LINE('',#6129,#6130); +#6129 = CARTESIAN_POINT('',(-26.,47.7738,-38.9353)); +#6130 = VECTOR('',#6131,1.); +#6131 = DIRECTION('',(-0.,-0.,1.)); +#6132 = PCURVE('',#4292,#6133); +#6133 = DEFINITIONAL_REPRESENTATION('',(#6134),#6138); +#6134 = LINE('',#6135,#6136); +#6135 = CARTESIAN_POINT('',(-0.,-4.5)); +#6136 = VECTOR('',#6137,1.); +#6137 = DIRECTION('',(-1.,0.)); +#6138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6139 = PCURVE('',#4264,#6140); +#6140 = DEFINITIONAL_REPRESENTATION('',(#6141),#6145); +#6141 = LINE('',#6142,#6143); +#6142 = CARTESIAN_POINT('',(-0.,0.)); +#6143 = VECTOR('',#6144,1.); +#6144 = DIRECTION('',(-1.,0.)); +#6145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6146 = ORIENTED_EDGE('',*,*,#4276,.T.); +#6147 = ORIENTED_EDGE('',*,*,#5795,.F.); +#6148 = ADVANCED_FACE('',(#6149),#4264,.T.); +#6149 = FACE_BOUND('',#6150,.F.); +#6150 = EDGE_LOOP('',(#6151,#6174,#6195,#6196)); +#6151 = ORIENTED_EDGE('',*,*,#6152,.F.); +#6152 = EDGE_CURVE('',#6153,#4221,#6155,.T.); +#6153 = VERTEX_POINT('',#6154); +#6154 = CARTESIAN_POINT('',(-14.,47.7738,-38.9353)); +#6155 = SURFACE_CURVE('',#6156,(#6160,#6167),.PCURVE_S1.); +#6156 = LINE('',#6157,#6158); +#6157 = CARTESIAN_POINT('',(-14.,47.7738,-38.9353)); +#6158 = VECTOR('',#6159,1.); +#6159 = DIRECTION('',(-0.,-0.,1.)); +#6160 = PCURVE('',#4264,#6161); +#6161 = DEFINITIONAL_REPRESENTATION('',(#6162),#6166); +#6162 = LINE('',#6163,#6164); +#6163 = CARTESIAN_POINT('',(-0.,12.)); +#6164 = VECTOR('',#6165,1.); +#6165 = DIRECTION('',(-1.,0.)); +#6166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6167 = PCURVE('',#4236,#6168); +#6168 = DEFINITIONAL_REPRESENTATION('',(#6169),#6173); +#6169 = LINE('',#6170,#6171); +#6170 = CARTESIAN_POINT('',(-0.,-4.5)); +#6171 = VECTOR('',#6172,1.); +#6172 = DIRECTION('',(-1.,0.)); +#6173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6174 = ORIENTED_EDGE('',*,*,#6175,.F.); +#6175 = EDGE_CURVE('',#6099,#6153,#6176,.T.); +#6176 = SURFACE_CURVE('',#6177,(#6181,#6188),.PCURVE_S1.); +#6177 = LINE('',#6178,#6179); +#6178 = CARTESIAN_POINT('',(-26.,47.7738,-38.9353)); +#6179 = VECTOR('',#6180,1.); +#6180 = DIRECTION('',(1.,-0.,-0.)); +#6181 = PCURVE('',#4264,#6182); +#6182 = DEFINITIONAL_REPRESENTATION('',(#6183),#6187); +#6183 = LINE('',#6184,#6185); +#6184 = CARTESIAN_POINT('',(-0.,0.)); +#6185 = VECTOR('',#6186,1.); +#6186 = DIRECTION('',(-0.,1.)); +#6187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6188 = PCURVE('',#6114,#6189); +#6189 = DEFINITIONAL_REPRESENTATION('',(#6190),#6194); +#6190 = LINE('',#6191,#6192); +#6191 = CARTESIAN_POINT('',(-0.,4.5)); +#6192 = VECTOR('',#6193,1.); +#6193 = DIRECTION('',(-1.,0.)); +#6194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6195 = ORIENTED_EDGE('',*,*,#6126,.T.); +#6196 = ORIENTED_EDGE('',*,*,#4248,.T.); +#6197 = ADVANCED_FACE('',(#6198),#4236,.T.); +#6198 = FACE_BOUND('',#6199,.F.); +#6199 = EDGE_LOOP('',(#6200,#6223,#6251,#6272,#6273,#6274)); +#6200 = ORIENTED_EDGE('',*,*,#6201,.T.); +#6201 = EDGE_CURVE('',#5745,#6202,#6204,.T.); +#6202 = VERTEX_POINT('',#6203); +#6203 = CARTESIAN_POINT('',(-14.,60.1369,-33.9353)); +#6204 = SURFACE_CURVE('',#6205,(#6209,#6216),.PCURVE_S1.); +#6205 = LINE('',#6206,#6207); +#6206 = CARTESIAN_POINT('',(-14.,49.836891800137,-33.9353)); +#6207 = VECTOR('',#6208,1.); +#6208 = DIRECTION('',(-0.,1.,-0.)); +#6209 = PCURVE('',#4236,#6210); +#6210 = DEFINITIONAL_REPRESENTATION('',(#6211),#6215); +#6211 = LINE('',#6212,#6213); +#6212 = CARTESIAN_POINT('',(-5.,-2.436908199863)); +#6213 = VECTOR('',#6214,1.); +#6214 = DIRECTION('',(-0.,1.)); +#6215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6216 = PCURVE('',#5783,#6217); +#6217 = DEFINITIONAL_REPRESENTATION('',(#6218),#6222); +#6218 = LINE('',#6219,#6220); +#6219 = CARTESIAN_POINT('',(-12.,2.436908199863)); +#6220 = VECTOR('',#6221,1.); +#6221 = DIRECTION('',(-0.,-1.)); +#6222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6223 = ORIENTED_EDGE('',*,*,#6224,.F.); +#6224 = EDGE_CURVE('',#6225,#6202,#6227,.T.); +#6225 = VERTEX_POINT('',#6226); +#6226 = CARTESIAN_POINT('',(-14.,60.1369,-38.9353)); +#6227 = SURFACE_CURVE('',#6228,(#6232,#6239),.PCURVE_S1.); +#6228 = LINE('',#6229,#6230); +#6229 = CARTESIAN_POINT('',(-14.,60.1369,-38.9353)); +#6230 = VECTOR('',#6231,1.); +#6231 = DIRECTION('',(-0.,-0.,1.)); +#6232 = PCURVE('',#4236,#6233); +#6233 = DEFINITIONAL_REPRESENTATION('',(#6234),#6238); +#6234 = LINE('',#6235,#6236); +#6235 = CARTESIAN_POINT('',(-0.,7.8631)); +#6236 = VECTOR('',#6237,1.); +#6237 = DIRECTION('',(-1.,0.)); +#6238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6239 = PCURVE('',#6240,#6245); +#6240 = CYLINDRICAL_SURFACE('',#6241,1.7); +#6241 = AXIS2_PLACEMENT_3D('',#6242,#6243,#6244); +#6242 = CARTESIAN_POINT('',(-15.7,60.1369,-38.9353)); +#6243 = DIRECTION('',(-0.,-0.,1.)); +#6244 = DIRECTION('',(1.,-0.,-0.)); +#6245 = DEFINITIONAL_REPRESENTATION('',(#6246),#6250); +#6246 = LINE('',#6247,#6248); +#6247 = CARTESIAN_POINT('',(-6.28318530718,0.)); +#6248 = VECTOR('',#6249,1.); +#6249 = DIRECTION('',(0.,1.)); +#6250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6251 = ORIENTED_EDGE('',*,*,#6252,.T.); +#6252 = EDGE_CURVE('',#6225,#6153,#6253,.T.); +#6253 = SURFACE_CURVE('',#6254,(#6258,#6265),.PCURVE_S1.); +#6254 = LINE('',#6255,#6256); +#6255 = CARTESIAN_POINT('',(-14.,60.1369,-38.9353)); +#6256 = VECTOR('',#6257,1.); +#6257 = DIRECTION('',(-0.,-1.,-0.)); +#6258 = PCURVE('',#4236,#6259); +#6259 = DEFINITIONAL_REPRESENTATION('',(#6260),#6264); +#6260 = LINE('',#6261,#6262); +#6261 = CARTESIAN_POINT('',(-0.,7.8631)); +#6262 = VECTOR('',#6263,1.); +#6263 = DIRECTION('',(-0.,-1.)); +#6264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6265 = PCURVE('',#6114,#6266); +#6266 = DEFINITIONAL_REPRESENTATION('',(#6267),#6271); +#6267 = LINE('',#6268,#6269); +#6268 = CARTESIAN_POINT('',(-12.,-7.8631)); +#6269 = VECTOR('',#6270,1.); +#6270 = DIRECTION('',(-0.,1.)); +#6271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6272 = ORIENTED_EDGE('',*,*,#6152,.T.); +#6273 = ORIENTED_EDGE('',*,*,#4220,.T.); +#6274 = ORIENTED_EDGE('',*,*,#5744,.F.); +#6275 = ADVANCED_FACE('',(#6276),#4442,.T.); +#6276 = FACE_BOUND('',#6277,.F.); +#6277 = EDGE_LOOP('',(#6278,#6279,#6300,#6301)); +#6278 = ORIENTED_EDGE('',*,*,#5291,.T.); +#6279 = ORIENTED_EDGE('',*,*,#6280,.T.); +#6280 = EDGE_CURVE('',#5268,#4425,#6281,.T.); +#6281 = SURFACE_CURVE('',#6282,(#6286,#6293),.PCURVE_S1.); +#6282 = LINE('',#6283,#6284); +#6283 = CARTESIAN_POINT('',(-23.71550880021,38.086891523071, + -33.53526644707)); +#6284 = VECTOR('',#6285,1.); +#6285 = DIRECTION('',(4.848719991821E-15,9.347875970647E-15,-1.)); +#6286 = PCURVE('',#4442,#6287); +#6287 = DEFINITIONAL_REPRESENTATION('',(#6288),#6292); +#6288 = LINE('',#6289,#6290); +#6289 = CARTESIAN_POINT('',(-9.0155,0.4)); +#6290 = VECTOR('',#6291,1.); +#6291 = DIRECTION('',(2.124032157708E-14,1.)); +#6292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6293 = PCURVE('',#4470,#6294); +#6294 = DEFINITIONAL_REPRESENTATION('',(#6295),#6299); +#6295 = LINE('',#6296,#6297); +#6296 = CARTESIAN_POINT('',(0.4,-20.02499999999)); +#6297 = VECTOR('',#6298,1.); +#6298 = DIRECTION('',(1.,4.834842204013E-15)); +#6299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6300 = ORIENTED_EDGE('',*,*,#4424,.T.); +#6301 = ORIENTED_EDGE('',*,*,#6302,.T.); +#6302 = EDGE_CURVE('',#4427,#5292,#6303,.T.); +#6303 = SURFACE_CURVE('',#6304,(#6308,#6315),.PCURVE_S1.); +#6304 = LINE('',#6305,#6306); +#6305 = CARTESIAN_POINT('',(-23.71550880021,43.686891523071, + -33.53526644707)); +#6306 = VECTOR('',#6307,1.); +#6307 = DIRECTION('',(-4.848719991821E-15,-9.347875970648E-15,1.)); +#6308 = PCURVE('',#4442,#6309); +#6309 = DEFINITIONAL_REPRESENTATION('',(#6310),#6314); +#6310 = LINE('',#6311,#6312); +#6311 = CARTESIAN_POINT('',(-3.4155,0.4)); +#6312 = VECTOR('',#6313,1.); +#6313 = DIRECTION('',(-2.124032157708E-14,-1.)); +#6314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6315 = PCURVE('',#4524,#6316); +#6316 = DEFINITIONAL_REPRESENTATION('',(#6317),#6321); +#6317 = LINE('',#6318,#6319); +#6318 = CARTESIAN_POINT('',(-18.02499999999,0.399999999999)); +#6319 = VECTOR('',#6320,1.); +#6320 = DIRECTION('',(2.292073341162E-14,-1.)); +#6321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6322 = ADVANCED_FACE('',(#6323),#4470,.F.); +#6323 = FACE_BOUND('',#6324,.F.); +#6324 = EDGE_LOOP('',(#6325,#6326,#6347,#6348,#6349,#6350)); +#6325 = ORIENTED_EDGE('',*,*,#5168,.T.); +#6326 = ORIENTED_EDGE('',*,*,#6327,.F.); +#6327 = EDGE_CURVE('',#4455,#5146,#6328,.T.); +#6328 = SURFACE_CURVE('',#6329,(#6333,#6340),.PCURVE_S1.); +#6329 = LINE('',#6330,#6331); +#6330 = CARTESIAN_POINT('',(-25.71550880021,38.08689152307, + -33.13526644707)); +#6331 = VECTOR('',#6332,1.); +#6332 = DIRECTION('',(-4.084695544767E-15,2.566572199577E-15,1.)); +#6333 = PCURVE('',#4470,#6334); +#6334 = DEFINITIONAL_REPRESENTATION('',(#6335),#6339); +#6335 = LINE('',#6336,#6337); +#6336 = CARTESIAN_POINT('',(-3.056582764674E-16,-22.02499999999)); +#6337 = VECTOR('',#6338,1.); +#6338 = DIRECTION('',(-1.,-4.070817756959E-15)); +#6339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6340 = PCURVE('',#4498,#6341); +#6341 = DEFINITIONAL_REPRESENTATION('',(#6342),#6346); +#6342 = LINE('',#6343,#6344); +#6343 = CARTESIAN_POINT('',(4.015500000001,3.820264251935E-12)); +#6344 = VECTOR('',#6345,1.); +#6345 = DIRECTION('',(-9.539460397464E-13,1.)); +#6346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6347 = ORIENTED_EDGE('',*,*,#4454,.F.); +#6348 = ORIENTED_EDGE('',*,*,#6280,.F.); +#6349 = ORIENTED_EDGE('',*,*,#5267,.F.); +#6350 = ORIENTED_EDGE('',*,*,#5217,.F.); +#6351 = ADVANCED_FACE('',(#6352),#4524,.F.); +#6352 = FACE_BOUND('',#6353,.F.); +#6353 = EDGE_LOOP('',(#6354,#6355,#6377,#6378,#6379,#6380)); +#6354 = ORIENTED_EDGE('',*,*,#5122,.T.); +#6355 = ORIENTED_EDGE('',*,*,#6356,.F.); +#6356 = EDGE_CURVE('',#5315,#5095,#6357,.T.); +#6357 = SURFACE_CURVE('',#6358,(#6363,#6370),.PCURVE_S1.); +#6358 = CIRCLE('',#6359,0.5); +#6359 = AXIS2_PLACEMENT_3D('',#6360,#6361,#6362); +#6360 = CARTESIAN_POINT('',(-25.08666930589,43.686891523071, + -28.03526644707)); +#6361 = DIRECTION('',(1.803187229162E-14,1.,5.871122787574E-15)); +#6362 = DIRECTION('',(0.937132766358,-1.484939483313E-14,-0.348973033654 + )); +#6363 = PCURVE('',#4524,#6364); +#6364 = DEFINITIONAL_REPRESENTATION('',(#6365),#6369); +#6365 = CIRCLE('',#6366,0.5); +#6366 = AXIS2_PLACEMENT_2D('',#6367,#6368); +#6367 = CARTESIAN_POINT('',(-19.39616050567,-5.100000000001)); +#6368 = DIRECTION('',(0.937132766358,0.348973033654)); +#6369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6370 = PCURVE('',#5110,#6371); +#6371 = DEFINITIONAL_REPRESENTATION('',(#6372),#6376); +#6372 = LINE('',#6373,#6374); +#6373 = CARTESIAN_POINT('',(6.28318530718,6.150000277066)); +#6374 = VECTOR('',#6375,1.); +#6375 = DIRECTION('',(-1.,-2.925678449406E-15)); +#6376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6377 = ORIENTED_EDGE('',*,*,#5314,.F.); +#6378 = ORIENTED_EDGE('',*,*,#6302,.F.); +#6379 = ORIENTED_EDGE('',*,*,#4510,.F.); +#6380 = ORIENTED_EDGE('',*,*,#6381,.F.); +#6381 = EDGE_CURVE('',#5123,#4483,#6382,.T.); +#6382 = SURFACE_CURVE('',#6383,(#6387,#6394),.PCURVE_S1.); +#6383 = LINE('',#6384,#6385); +#6384 = CARTESIAN_POINT('',(-25.71550880021,43.68689152307, + -33.13526644707)); +#6385 = VECTOR('',#6386,1.); +#6386 = DIRECTION('',(1.058875209736E-14,2.200256379606E-17,-1.)); +#6387 = PCURVE('',#4524,#6388); +#6388 = DEFINITIONAL_REPRESENTATION('',(#6389),#6393); +#6389 = LINE('',#6390,#6391); +#6390 = CARTESIAN_POINT('',(-20.02499999999,-5.560833044037E-13)); +#6391 = VECTOR('',#6392,1.); +#6392 = DIRECTION('',(-1.718070130608E-14,1.)); +#6393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6394 = PCURVE('',#4498,#6395); +#6395 = DEFINITIONAL_REPRESENTATION('',(#6396),#6400); +#6396 = LINE('',#6397,#6398); +#6397 = CARTESIAN_POINT('',(-1.584499999999,-1.507460766327E-12)); +#6398 = VECTOR('',#6399,1.); +#6399 = DIRECTION('',(9.51357464983E-13,-1.)); +#6400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6401 = ADVANCED_FACE('',(#6402),#4498,.F.); +#6402 = FACE_BOUND('',#6403,.F.); +#6403 = EDGE_LOOP('',(#6404,#6405,#6406,#6407)); +#6404 = ORIENTED_EDGE('',*,*,#5145,.T.); +#6405 = ORIENTED_EDGE('',*,*,#6381,.T.); +#6406 = ORIENTED_EDGE('',*,*,#4482,.F.); +#6407 = ORIENTED_EDGE('',*,*,#6327,.T.); +#6408 = ADVANCED_FACE('',(#6409,#6487),#4604,.F.); +#6409 = FACE_BOUND('',#6410,.T.); +#6410 = EDGE_LOOP('',(#6411,#6412,#6413,#6441,#6464,#6486)); +#6411 = ORIENTED_EDGE('',*,*,#6021,.T.); +#6412 = ORIENTED_EDGE('',*,*,#4588,.T.); +#6413 = ORIENTED_EDGE('',*,*,#6414,.T.); +#6414 = EDGE_CURVE('',#4589,#6415,#6417,.T.); +#6415 = VERTEX_POINT('',#6416); +#6416 = CARTESIAN_POINT('',(-15.7,19.9369,-38.9353)); +#6417 = SURFACE_CURVE('',#6418,(#6423,#6434),.PCURVE_S1.); +#6418 = CIRCLE('',#6419,1.7); +#6419 = AXIS2_PLACEMENT_3D('',#6420,#6421,#6422); +#6420 = CARTESIAN_POINT('',(-15.7,21.6369,-38.9353)); +#6421 = DIRECTION('',(-0.,-0.,-1.)); +#6422 = DIRECTION('',(-0.,1.,-0.)); +#6423 = PCURVE('',#4604,#6424); +#6424 = DEFINITIONAL_REPRESENTATION('',(#6425),#6433); +#6425 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6426,#6427,#6428,#6429, +#6430,#6431,#6432),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6426 = CARTESIAN_POINT('',(-10.3,10.6369)); +#6427 = CARTESIAN_POINT('',(-13.24448637286,10.6369)); +#6428 = CARTESIAN_POINT('',(-11.77224318643,13.1869)); +#6429 = CARTESIAN_POINT('',(-10.3,15.7369)); +#6430 = CARTESIAN_POINT('',(-8.827756813566,13.1869)); +#6431 = CARTESIAN_POINT('',(-7.355513627133,10.6369)); +#6432 = CARTESIAN_POINT('',(-10.3,10.6369)); +#6433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6434 = PCURVE('',#4632,#6435); +#6435 = DEFINITIONAL_REPRESENTATION('',(#6436),#6440); +#6436 = LINE('',#6437,#6438); +#6437 = CARTESIAN_POINT('',(1.570796326795,-0.)); +#6438 = VECTOR('',#6439,1.); +#6439 = DIRECTION('',(-1.,0.)); +#6440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6441 = ORIENTED_EDGE('',*,*,#6442,.F.); +#6442 = EDGE_CURVE('',#6443,#6415,#6445,.T.); +#6443 = VERTEX_POINT('',#6444); +#6444 = CARTESIAN_POINT('',(-24.3,19.9369,-38.9353)); +#6445 = SURFACE_CURVE('',#6446,(#6450,#6457),.PCURVE_S1.); +#6446 = LINE('',#6447,#6448); +#6447 = CARTESIAN_POINT('',(-26.,19.9369,-38.9353)); +#6448 = VECTOR('',#6449,1.); +#6449 = DIRECTION('',(1.,-0.,-0.)); +#6450 = PCURVE('',#4604,#6451); +#6451 = DEFINITIONAL_REPRESENTATION('',(#6452),#6456); +#6452 = LINE('',#6453,#6454); +#6453 = CARTESIAN_POINT('',(-0.,14.0369)); +#6454 = VECTOR('',#6455,1.); +#6455 = DIRECTION('',(-1.,0.)); +#6456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6457 = PCURVE('',#4716,#6458); +#6458 = DEFINITIONAL_REPRESENTATION('',(#6459),#6463); +#6459 = LINE('',#6460,#6461); +#6460 = CARTESIAN_POINT('',(-0.,0.)); +#6461 = VECTOR('',#6462,1.); +#6462 = DIRECTION('',(-0.,1.)); +#6463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6464 = ORIENTED_EDGE('',*,*,#6465,.F.); +#6465 = EDGE_CURVE('',#4840,#6443,#6466,.T.); +#6466 = SURFACE_CURVE('',#6467,(#6472,#6479),.PCURVE_S1.); +#6467 = CIRCLE('',#6468,1.7); +#6468 = AXIS2_PLACEMENT_3D('',#6469,#6470,#6471); +#6469 = CARTESIAN_POINT('',(-24.3,21.6369,-38.9353)); +#6470 = DIRECTION('',(-0.,0.,1.)); +#6471 = DIRECTION('',(-0.,1.,-0.)); +#6472 = PCURVE('',#4604,#6473); +#6473 = DEFINITIONAL_REPRESENTATION('',(#6474),#6478); +#6474 = CIRCLE('',#6475,1.7); +#6475 = AXIS2_PLACEMENT_2D('',#6476,#6477); +#6476 = CARTESIAN_POINT('',(-1.7,12.3369)); +#6477 = DIRECTION('',(-0.,-1.)); +#6478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6479 = PCURVE('',#4745,#6480); +#6480 = DEFINITIONAL_REPRESENTATION('',(#6481),#6485); +#6481 = LINE('',#6482,#6483); +#6482 = CARTESIAN_POINT('',(-7.853981633975,0.)); +#6483 = VECTOR('',#6484,1.); +#6484 = DIRECTION('',(1.,-0.)); +#6485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6486 = ORIENTED_EDGE('',*,*,#4839,.T.); +#6487 = FACE_BOUND('',#6488,.T.); +#6488 = EDGE_LOOP('',(#6489)); +#6489 = ORIENTED_EDGE('',*,*,#6490,.F.); +#6490 = EDGE_CURVE('',#6491,#6491,#6493,.T.); +#6491 = VERTEX_POINT('',#6492); +#6492 = CARTESIAN_POINT('',(-17.65,25.9369,-38.9353)); +#6493 = SURFACE_CURVE('',#6494,(#6499,#6510),.PCURVE_S1.); +#6494 = CIRCLE('',#6495,2.35); +#6495 = AXIS2_PLACEMENT_3D('',#6496,#6497,#6498); +#6496 = CARTESIAN_POINT('',(-20.,25.9369,-38.9353)); +#6497 = DIRECTION('',(0.,0.,-1.)); +#6498 = DIRECTION('',(1.,-0.,-0.)); +#6499 = PCURVE('',#4604,#6500); +#6500 = DEFINITIONAL_REPRESENTATION('',(#6501),#6509); +#6501 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6502,#6503,#6504,#6505, +#6506,#6507,#6508),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6502 = CARTESIAN_POINT('',(-8.35,8.0369)); +#6503 = CARTESIAN_POINT('',(-8.35,12.107219397787)); +#6504 = CARTESIAN_POINT('',(-4.825,10.072059698893)); +#6505 = CARTESIAN_POINT('',(-1.3,8.0369)); +#6506 = CARTESIAN_POINT('',(-4.825,6.001740301107)); +#6507 = CARTESIAN_POINT('',(-8.35,3.966580602213)); +#6508 = CARTESIAN_POINT('',(-8.35,8.0369)); +#6509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6510 = PCURVE('',#6511,#6516); +#6511 = CYLINDRICAL_SURFACE('',#6512,2.35); +#6512 = AXIS2_PLACEMENT_3D('',#6513,#6514,#6515); +#6513 = CARTESIAN_POINT('',(-20.,25.9369,-39.1853)); +#6514 = DIRECTION('',(-0.,-0.,1.)); +#6515 = DIRECTION('',(1.,-0.,-0.)); +#6516 = DEFINITIONAL_REPRESENTATION('',(#6517),#6521); +#6517 = LINE('',#6518,#6519); +#6518 = CARTESIAN_POINT('',(-0.,0.25)); +#6519 = VECTOR('',#6520,1.); +#6520 = DIRECTION('',(-1.,0.)); +#6521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6522 = ADVANCED_FACE('',(#6523),#4632,.T.); +#6523 = FACE_BOUND('',#6524,.F.); +#6524 = EDGE_LOOP('',(#6525,#6526,#6547,#6548)); +#6525 = ORIENTED_EDGE('',*,*,#6414,.T.); +#6526 = ORIENTED_EDGE('',*,*,#6527,.T.); +#6527 = EDGE_CURVE('',#6415,#4673,#6528,.T.); +#6528 = SURFACE_CURVE('',#6529,(#6533,#6540),.PCURVE_S1.); +#6529 = LINE('',#6530,#6531); +#6530 = CARTESIAN_POINT('',(-15.7,19.9369,-38.9353)); +#6531 = VECTOR('',#6532,1.); +#6532 = DIRECTION('',(-0.,-0.,1.)); +#6533 = PCURVE('',#4632,#6534); +#6534 = DEFINITIONAL_REPRESENTATION('',(#6535),#6539); +#6535 = LINE('',#6536,#6537); +#6536 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#6537 = VECTOR('',#6538,1.); +#6538 = DIRECTION('',(-0.,1.)); +#6539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6540 = PCURVE('',#4716,#6541); +#6541 = DEFINITIONAL_REPRESENTATION('',(#6542),#6546); +#6542 = LINE('',#6543,#6544); +#6543 = CARTESIAN_POINT('',(-0.,10.3)); +#6544 = VECTOR('',#6545,1.); +#6545 = DIRECTION('',(-1.,0.)); +#6546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6547 = ORIENTED_EDGE('',*,*,#4672,.F.); +#6548 = ORIENTED_EDGE('',*,*,#4616,.F.); +#6549 = ADVANCED_FACE('',(#6550),#4745,.T.); +#6550 = FACE_BOUND('',#6551,.F.); +#6551 = EDGE_LOOP('',(#6552,#6553,#6554,#6575)); +#6552 = ORIENTED_EDGE('',*,*,#4862,.T.); +#6553 = ORIENTED_EDGE('',*,*,#4728,.T.); +#6554 = ORIENTED_EDGE('',*,*,#6555,.F.); +#6555 = EDGE_CURVE('',#6443,#4701,#6556,.T.); +#6556 = SURFACE_CURVE('',#6557,(#6561,#6568),.PCURVE_S1.); +#6557 = LINE('',#6558,#6559); +#6558 = CARTESIAN_POINT('',(-24.3,19.9369,-38.9353)); +#6559 = VECTOR('',#6560,1.); +#6560 = DIRECTION('',(-0.,-0.,1.)); +#6561 = PCURVE('',#4745,#6562); +#6562 = DEFINITIONAL_REPRESENTATION('',(#6563),#6567); +#6563 = LINE('',#6564,#6565); +#6564 = CARTESIAN_POINT('',(-4.712388980385,0.)); +#6565 = VECTOR('',#6566,1.); +#6566 = DIRECTION('',(0.,1.)); +#6567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6568 = PCURVE('',#4716,#6569); +#6569 = DEFINITIONAL_REPRESENTATION('',(#6570),#6574); +#6570 = LINE('',#6571,#6572); +#6571 = CARTESIAN_POINT('',(-0.,1.7)); +#6572 = VECTOR('',#6573,1.); +#6573 = DIRECTION('',(-1.,0.)); +#6574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6575 = ORIENTED_EDGE('',*,*,#6465,.F.); +#6576 = ADVANCED_FACE('',(#6577),#4716,.T.); +#6577 = FACE_BOUND('',#6578,.F.); +#6578 = EDGE_LOOP('',(#6579,#6580,#6581,#6582)); +#6579 = ORIENTED_EDGE('',*,*,#6442,.F.); +#6580 = ORIENTED_EDGE('',*,*,#6555,.T.); +#6581 = ORIENTED_EDGE('',*,*,#4700,.T.); +#6582 = ORIENTED_EDGE('',*,*,#6527,.F.); +#6583 = ADVANCED_FACE('',(#6584),#4801,.F.); +#6584 = FACE_BOUND('',#6585,.T.); +#6585 = EDGE_LOOP('',(#6586,#6587,#6610,#6641)); +#6586 = ORIENTED_EDGE('',*,*,#4780,.F.); +#6587 = ORIENTED_EDGE('',*,*,#6588,.F.); +#6588 = EDGE_CURVE('',#6589,#4781,#6591,.T.); +#6589 = VERTEX_POINT('',#6590); +#6590 = CARTESIAN_POINT('',(-15.5,25.9369,-36.7353)); +#6591 = SEAM_CURVE('',#6592,(#6596,#6603),.PCURVE_S1.); +#6592 = LINE('',#6593,#6594); +#6593 = CARTESIAN_POINT('',(-15.5,25.9369,-36.7353)); +#6594 = VECTOR('',#6595,1.); +#6595 = DIRECTION('',(-0.,-0.,1.)); +#6596 = PCURVE('',#4801,#6597); +#6597 = DEFINITIONAL_REPRESENTATION('',(#6598),#6602); +#6598 = LINE('',#6599,#6600); +#6599 = CARTESIAN_POINT('',(-0.,-0.)); +#6600 = VECTOR('',#6601,1.); +#6601 = DIRECTION('',(-0.,1.)); +#6602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6603 = PCURVE('',#4801,#6604); +#6604 = DEFINITIONAL_REPRESENTATION('',(#6605),#6609); +#6605 = LINE('',#6606,#6607); +#6606 = CARTESIAN_POINT('',(-6.28318530718,-0.)); +#6607 = VECTOR('',#6608,1.); +#6608 = DIRECTION('',(-0.,1.)); +#6609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6610 = ORIENTED_EDGE('',*,*,#6611,.T.); +#6611 = EDGE_CURVE('',#6589,#6589,#6612,.T.); +#6612 = SURFACE_CURVE('',#6613,(#6618,#6625),.PCURVE_S1.); +#6613 = CIRCLE('',#6614,4.5); +#6614 = AXIS2_PLACEMENT_3D('',#6615,#6616,#6617); +#6615 = CARTESIAN_POINT('',(-20.,25.9369,-36.7353)); +#6616 = DIRECTION('',(0.,0.,-1.)); +#6617 = DIRECTION('',(1.,-0.,-0.)); +#6618 = PCURVE('',#4801,#6619); +#6619 = DEFINITIONAL_REPRESENTATION('',(#6620),#6624); +#6620 = LINE('',#6621,#6622); +#6621 = CARTESIAN_POINT('',(-0.,0.)); +#6622 = VECTOR('',#6623,1.); +#6623 = DIRECTION('',(-1.,0.)); +#6624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6625 = PCURVE('',#6626,#6631); +#6626 = PLANE('',#6627); +#6627 = AXIS2_PLACEMENT_3D('',#6628,#6629,#6630); +#6628 = CARTESIAN_POINT('',(-20.,25.9369,-36.7353)); +#6629 = DIRECTION('',(-0.,-0.,1.)); +#6630 = DIRECTION('',(-1.,0.,0.)); +#6631 = DEFINITIONAL_REPRESENTATION('',(#6632),#6640); +#6632 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6633,#6634,#6635,#6636, +#6637,#6638,#6639),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6633 = CARTESIAN_POINT('',(-4.5,0.)); +#6634 = CARTESIAN_POINT('',(-4.5,7.79422863406)); +#6635 = CARTESIAN_POINT('',(2.25,3.89711431703)); +#6636 = CARTESIAN_POINT('',(9.,1.102182119233E-15)); +#6637 = CARTESIAN_POINT('',(2.25,-3.89711431703)); +#6638 = CARTESIAN_POINT('',(-4.5,-7.79422863406)); +#6639 = CARTESIAN_POINT('',(-4.5,0.)); +#6640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6641 = ORIENTED_EDGE('',*,*,#6588,.T.); +#6642 = ADVANCED_FACE('',(#6643),#5110,.F.); +#6643 = FACE_BOUND('',#6644,.T.); +#6644 = EDGE_LOOP('',(#6645,#6646,#6647,#6648)); +#6645 = ORIENTED_EDGE('',*,*,#5338,.F.); +#6646 = ORIENTED_EDGE('',*,*,#5821,.F.); +#6647 = ORIENTED_EDGE('',*,*,#5094,.F.); +#6648 = ORIENTED_EDGE('',*,*,#6356,.F.); +#6649 = ADVANCED_FACE('',(#6650,#6733),#5783,.T.); +#6650 = FACE_BOUND('',#6651,.F.); +#6651 = EDGE_LOOP('',(#6652,#6653,#6681,#6709,#6731,#6732)); +#6652 = ORIENTED_EDGE('',*,*,#6047,.F.); +#6653 = ORIENTED_EDGE('',*,*,#6654,.T.); +#6654 = EDGE_CURVE('',#6048,#6655,#6657,.T.); +#6655 = VERTEX_POINT('',#6656); +#6656 = CARTESIAN_POINT('',(-24.3,61.8369,-33.9353)); +#6657 = SURFACE_CURVE('',#6658,(#6663,#6674),.PCURVE_S1.); +#6658 = CIRCLE('',#6659,1.7); +#6659 = AXIS2_PLACEMENT_3D('',#6660,#6661,#6662); +#6660 = CARTESIAN_POINT('',(-24.3,60.1369,-33.9353)); +#6661 = DIRECTION('',(-0.,-0.,-1.)); +#6662 = DIRECTION('',(-0.,1.,-0.)); +#6663 = PCURVE('',#5783,#6664); +#6664 = DEFINITIONAL_REPRESENTATION('',(#6665),#6673); +#6665 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6666,#6667,#6668,#6669, +#6670,#6671,#6672),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6666 = CARTESIAN_POINT('',(-1.7,-9.5631)); +#6667 = CARTESIAN_POINT('',(-4.644486372867,-9.5631)); +#6668 = CARTESIAN_POINT('',(-3.172243186434,-7.0131)); +#6669 = CARTESIAN_POINT('',(-1.7,-4.4631)); +#6670 = CARTESIAN_POINT('',(-0.227756813566,-7.0131)); +#6671 = CARTESIAN_POINT('',(1.244486372867,-9.5631)); +#6672 = CARTESIAN_POINT('',(-1.7,-9.5631)); +#6673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6674 = PCURVE('',#6086,#6675); +#6675 = DEFINITIONAL_REPRESENTATION('',(#6676),#6680); +#6676 = LINE('',#6677,#6678); +#6677 = CARTESIAN_POINT('',(4.712388980385,5.)); +#6678 = VECTOR('',#6679,1.); +#6679 = DIRECTION('',(-1.,0.)); +#6680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6681 = ORIENTED_EDGE('',*,*,#6682,.T.); +#6682 = EDGE_CURVE('',#6655,#6683,#6685,.T.); +#6683 = VERTEX_POINT('',#6684); +#6684 = CARTESIAN_POINT('',(-15.7,61.8369,-33.9353)); +#6685 = SURFACE_CURVE('',#6686,(#6690,#6697),.PCURVE_S1.); +#6686 = LINE('',#6687,#6688); +#6687 = CARTESIAN_POINT('',(-26.,61.8369,-33.9353)); +#6688 = VECTOR('',#6689,1.); +#6689 = DIRECTION('',(1.,-0.,-0.)); +#6690 = PCURVE('',#5783,#6691); +#6691 = DEFINITIONAL_REPRESENTATION('',(#6692),#6696); +#6692 = LINE('',#6693,#6694); +#6693 = CARTESIAN_POINT('',(-0.,-9.5631)); +#6694 = VECTOR('',#6695,1.); +#6695 = DIRECTION('',(-1.,0.)); +#6696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6697 = PCURVE('',#6698,#6703); +#6698 = PLANE('',#6699); +#6699 = AXIS2_PLACEMENT_3D('',#6700,#6701,#6702); +#6700 = CARTESIAN_POINT('',(-26.,61.8369,-38.9353)); +#6701 = DIRECTION('',(-0.,-1.,-0.)); +#6702 = DIRECTION('',(0.,0.,-1.)); +#6703 = DEFINITIONAL_REPRESENTATION('',(#6704),#6708); +#6704 = LINE('',#6705,#6706); +#6705 = CARTESIAN_POINT('',(-5.,0.)); +#6706 = VECTOR('',#6707,1.); +#6707 = DIRECTION('',(-0.,1.)); +#6708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6709 = ORIENTED_EDGE('',*,*,#6710,.F.); +#6710 = EDGE_CURVE('',#6202,#6683,#6711,.T.); +#6711 = SURFACE_CURVE('',#6712,(#6717,#6724),.PCURVE_S1.); +#6712 = CIRCLE('',#6713,1.7); +#6713 = AXIS2_PLACEMENT_3D('',#6714,#6715,#6716); +#6714 = CARTESIAN_POINT('',(-15.7,60.1369,-33.9353)); +#6715 = DIRECTION('',(-0.,0.,1.)); +#6716 = DIRECTION('',(-0.,1.,-0.)); +#6717 = PCURVE('',#5783,#6718); +#6718 = DEFINITIONAL_REPRESENTATION('',(#6719),#6723); +#6719 = CIRCLE('',#6720,1.7); +#6720 = AXIS2_PLACEMENT_2D('',#6721,#6722); +#6721 = CARTESIAN_POINT('',(-10.3,-7.8631)); +#6722 = DIRECTION('',(-0.,-1.)); +#6723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6724 = PCURVE('',#6240,#6725); +#6725 = DEFINITIONAL_REPRESENTATION('',(#6726),#6730); +#6726 = LINE('',#6727,#6728); +#6727 = CARTESIAN_POINT('',(-10.99557428756,5.)); +#6728 = VECTOR('',#6729,1.); +#6729 = DIRECTION('',(1.,-0.)); +#6730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6731 = ORIENTED_EDGE('',*,*,#6201,.F.); +#6732 = ORIENTED_EDGE('',*,*,#5767,.F.); +#6733 = FACE_BOUND('',#6734,.F.); +#6734 = EDGE_LOOP('',(#6735)); +#6735 = ORIENTED_EDGE('',*,*,#6736,.F.); +#6736 = EDGE_CURVE('',#6737,#6737,#6739,.T.); +#6737 = VERTEX_POINT('',#6738); +#6738 = CARTESIAN_POINT('',(-15.5,55.8369,-33.9353)); +#6739 = SURFACE_CURVE('',#6740,(#6745,#6756),.PCURVE_S1.); +#6740 = CIRCLE('',#6741,4.5); +#6741 = AXIS2_PLACEMENT_3D('',#6742,#6743,#6744); +#6742 = CARTESIAN_POINT('',(-20.,55.8369,-33.9353)); +#6743 = DIRECTION('',(0.,0.,-1.)); +#6744 = DIRECTION('',(1.,-0.,-0.)); +#6745 = PCURVE('',#5783,#6746); +#6746 = DEFINITIONAL_REPRESENTATION('',(#6747),#6755); +#6747 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6748,#6749,#6750,#6751, +#6752,#6753,#6754),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6748 = CARTESIAN_POINT('',(-10.5,-3.5631)); +#6749 = CARTESIAN_POINT('',(-10.5,4.23112863406)); +#6750 = CARTESIAN_POINT('',(-3.75,0.33401431703)); +#6751 = CARTESIAN_POINT('',(3.,-3.5631)); +#6752 = CARTESIAN_POINT('',(-3.75,-7.46021431703)); +#6753 = CARTESIAN_POINT('',(-10.5,-11.35732863406)); +#6754 = CARTESIAN_POINT('',(-10.5,-3.5631)); +#6755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6756 = PCURVE('',#6757,#6762); +#6757 = CYLINDRICAL_SURFACE('',#6758,4.5); +#6758 = AXIS2_PLACEMENT_3D('',#6759,#6760,#6761); +#6759 = CARTESIAN_POINT('',(-20.,55.8369,-36.7353)); +#6760 = DIRECTION('',(-0.,-0.,1.)); +#6761 = DIRECTION('',(1.,-0.,-0.)); +#6762 = DEFINITIONAL_REPRESENTATION('',(#6763),#6767); +#6763 = LINE('',#6764,#6765); +#6764 = CARTESIAN_POINT('',(-0.,2.8)); +#6765 = VECTOR('',#6766,1.); +#6766 = DIRECTION('',(-1.,0.)); +#6767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6768 = ADVANCED_FACE('',(#6769),#6086,.T.); +#6769 = FACE_BOUND('',#6770,.F.); +#6770 = EDGE_LOOP('',(#6771,#6799,#6820,#6821)); +#6771 = ORIENTED_EDGE('',*,*,#6772,.T.); +#6772 = EDGE_CURVE('',#6071,#6773,#6775,.T.); +#6773 = VERTEX_POINT('',#6774); +#6774 = CARTESIAN_POINT('',(-24.3,61.8369,-38.9353)); +#6775 = SURFACE_CURVE('',#6776,(#6781,#6788),.PCURVE_S1.); +#6776 = CIRCLE('',#6777,1.7); +#6777 = AXIS2_PLACEMENT_3D('',#6778,#6779,#6780); +#6778 = CARTESIAN_POINT('',(-24.3,60.1369,-38.9353)); +#6779 = DIRECTION('',(-0.,-0.,-1.)); +#6780 = DIRECTION('',(-0.,1.,-0.)); +#6781 = PCURVE('',#6086,#6782); +#6782 = DEFINITIONAL_REPRESENTATION('',(#6783),#6787); +#6783 = LINE('',#6784,#6785); +#6784 = CARTESIAN_POINT('',(4.712388980385,-0.)); +#6785 = VECTOR('',#6786,1.); +#6786 = DIRECTION('',(-1.,0.)); +#6787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6788 = PCURVE('',#6114,#6789); +#6789 = DEFINITIONAL_REPRESENTATION('',(#6790),#6798); +#6790 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6791,#6792,#6793,#6794, +#6795,#6796,#6797),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6791 = CARTESIAN_POINT('',(-1.7,-9.5631)); +#6792 = CARTESIAN_POINT('',(-4.644486372867,-9.5631)); +#6793 = CARTESIAN_POINT('',(-3.172243186434,-7.0131)); +#6794 = CARTESIAN_POINT('',(-1.7,-4.4631)); +#6795 = CARTESIAN_POINT('',(-0.227756813566,-7.0131)); +#6796 = CARTESIAN_POINT('',(1.244486372867,-9.5631)); +#6797 = CARTESIAN_POINT('',(-1.7,-9.5631)); +#6798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6799 = ORIENTED_EDGE('',*,*,#6800,.T.); +#6800 = EDGE_CURVE('',#6773,#6655,#6801,.T.); +#6801 = SURFACE_CURVE('',#6802,(#6806,#6813),.PCURVE_S1.); +#6802 = LINE('',#6803,#6804); +#6803 = CARTESIAN_POINT('',(-24.3,61.8369,-38.9353)); +#6804 = VECTOR('',#6805,1.); +#6805 = DIRECTION('',(-0.,-0.,1.)); +#6806 = PCURVE('',#6086,#6807); +#6807 = DEFINITIONAL_REPRESENTATION('',(#6808),#6812); +#6808 = LINE('',#6809,#6810); +#6809 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#6810 = VECTOR('',#6811,1.); +#6811 = DIRECTION('',(-0.,1.)); +#6812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6813 = PCURVE('',#6698,#6814); +#6814 = DEFINITIONAL_REPRESENTATION('',(#6815),#6819); +#6815 = LINE('',#6816,#6817); +#6816 = CARTESIAN_POINT('',(-0.,1.7)); +#6817 = VECTOR('',#6818,1.); +#6818 = DIRECTION('',(-1.,0.)); +#6819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6820 = ORIENTED_EDGE('',*,*,#6654,.F.); +#6821 = ORIENTED_EDGE('',*,*,#6070,.F.); +#6822 = ADVANCED_FACE('',(#6823,#6874),#6114,.F.); +#6823 = FACE_BOUND('',#6824,.T.); +#6824 = EDGE_LOOP('',(#6825,#6826,#6827,#6850,#6872,#6873)); +#6825 = ORIENTED_EDGE('',*,*,#6098,.T.); +#6826 = ORIENTED_EDGE('',*,*,#6772,.T.); +#6827 = ORIENTED_EDGE('',*,*,#6828,.T.); +#6828 = EDGE_CURVE('',#6773,#6829,#6831,.T.); +#6829 = VERTEX_POINT('',#6830); +#6830 = CARTESIAN_POINT('',(-15.7,61.8369,-38.9353)); +#6831 = SURFACE_CURVE('',#6832,(#6836,#6843),.PCURVE_S1.); +#6832 = LINE('',#6833,#6834); +#6833 = CARTESIAN_POINT('',(-26.,61.8369,-38.9353)); +#6834 = VECTOR('',#6835,1.); +#6835 = DIRECTION('',(1.,-0.,-0.)); +#6836 = PCURVE('',#6114,#6837); +#6837 = DEFINITIONAL_REPRESENTATION('',(#6838),#6842); +#6838 = LINE('',#6839,#6840); +#6839 = CARTESIAN_POINT('',(-0.,-9.5631)); +#6840 = VECTOR('',#6841,1.); +#6841 = DIRECTION('',(-1.,0.)); +#6842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6843 = PCURVE('',#6698,#6844); +#6844 = DEFINITIONAL_REPRESENTATION('',(#6845),#6849); +#6845 = LINE('',#6846,#6847); +#6846 = CARTESIAN_POINT('',(-0.,0.)); +#6847 = VECTOR('',#6848,1.); +#6848 = DIRECTION('',(-0.,1.)); +#6849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6850 = ORIENTED_EDGE('',*,*,#6851,.F.); +#6851 = EDGE_CURVE('',#6225,#6829,#6852,.T.); +#6852 = SURFACE_CURVE('',#6853,(#6858,#6865),.PCURVE_S1.); +#6853 = CIRCLE('',#6854,1.7); +#6854 = AXIS2_PLACEMENT_3D('',#6855,#6856,#6857); +#6855 = CARTESIAN_POINT('',(-15.7,60.1369,-38.9353)); +#6856 = DIRECTION('',(-0.,0.,1.)); +#6857 = DIRECTION('',(-0.,1.,-0.)); +#6858 = PCURVE('',#6114,#6859); +#6859 = DEFINITIONAL_REPRESENTATION('',(#6860),#6864); +#6860 = CIRCLE('',#6861,1.7); +#6861 = AXIS2_PLACEMENT_2D('',#6862,#6863); +#6862 = CARTESIAN_POINT('',(-10.3,-7.8631)); +#6863 = DIRECTION('',(-0.,-1.)); +#6864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6865 = PCURVE('',#6240,#6866); +#6866 = DEFINITIONAL_REPRESENTATION('',(#6867),#6871); +#6867 = LINE('',#6868,#6869); +#6868 = CARTESIAN_POINT('',(-10.99557428756,0.)); +#6869 = VECTOR('',#6870,1.); +#6870 = DIRECTION('',(1.,-0.)); +#6871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6872 = ORIENTED_EDGE('',*,*,#6252,.T.); +#6873 = ORIENTED_EDGE('',*,*,#6175,.F.); +#6874 = FACE_BOUND('',#6875,.T.); +#6875 = EDGE_LOOP('',(#6876)); +#6876 = ORIENTED_EDGE('',*,*,#6877,.F.); +#6877 = EDGE_CURVE('',#6878,#6878,#6880,.T.); +#6878 = VERTEX_POINT('',#6879); +#6879 = CARTESIAN_POINT('',(-17.65,55.8369,-38.9353)); +#6880 = SURFACE_CURVE('',#6881,(#6886,#6897),.PCURVE_S1.); +#6881 = CIRCLE('',#6882,2.35); +#6882 = AXIS2_PLACEMENT_3D('',#6883,#6884,#6885); +#6883 = CARTESIAN_POINT('',(-20.,55.8369,-38.9353)); +#6884 = DIRECTION('',(0.,0.,-1.)); +#6885 = DIRECTION('',(1.,-0.,-0.)); +#6886 = PCURVE('',#6114,#6887); +#6887 = DEFINITIONAL_REPRESENTATION('',(#6888),#6896); +#6888 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6889,#6890,#6891,#6892, +#6893,#6894,#6895),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6889 = CARTESIAN_POINT('',(-8.35,-3.5631)); +#6890 = CARTESIAN_POINT('',(-8.35,0.507219397787)); +#6891 = CARTESIAN_POINT('',(-4.825,-1.527940301107)); +#6892 = CARTESIAN_POINT('',(-1.3,-3.5631)); +#6893 = CARTESIAN_POINT('',(-4.825,-5.598259698893)); +#6894 = CARTESIAN_POINT('',(-8.35,-7.633419397787)); +#6895 = CARTESIAN_POINT('',(-8.35,-3.5631)); +#6896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6897 = PCURVE('',#6898,#6903); +#6898 = CYLINDRICAL_SURFACE('',#6899,2.35); +#6899 = AXIS2_PLACEMENT_3D('',#6900,#6901,#6902); +#6900 = CARTESIAN_POINT('',(-20.,55.8369,-39.1853)); +#6901 = DIRECTION('',(-0.,-0.,1.)); +#6902 = DIRECTION('',(1.,-0.,-0.)); +#6903 = DEFINITIONAL_REPRESENTATION('',(#6904),#6908); +#6904 = LINE('',#6905,#6906); +#6905 = CARTESIAN_POINT('',(-0.,0.25)); +#6906 = VECTOR('',#6907,1.); +#6907 = DIRECTION('',(-1.,0.)); +#6908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6909 = ADVANCED_FACE('',(#6910),#6240,.T.); +#6910 = FACE_BOUND('',#6911,.F.); +#6911 = EDGE_LOOP('',(#6912,#6913,#6914,#6935)); +#6912 = ORIENTED_EDGE('',*,*,#6224,.T.); +#6913 = ORIENTED_EDGE('',*,*,#6710,.T.); +#6914 = ORIENTED_EDGE('',*,*,#6915,.F.); +#6915 = EDGE_CURVE('',#6829,#6683,#6916,.T.); +#6916 = SURFACE_CURVE('',#6917,(#6921,#6928),.PCURVE_S1.); +#6917 = LINE('',#6918,#6919); +#6918 = CARTESIAN_POINT('',(-15.7,61.8369,-38.9353)); +#6919 = VECTOR('',#6920,1.); +#6920 = DIRECTION('',(-0.,-0.,1.)); +#6921 = PCURVE('',#6240,#6922); +#6922 = DEFINITIONAL_REPRESENTATION('',(#6923),#6927); +#6923 = LINE('',#6924,#6925); +#6924 = CARTESIAN_POINT('',(-4.712388980385,0.)); +#6925 = VECTOR('',#6926,1.); +#6926 = DIRECTION('',(0.,1.)); +#6927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6928 = PCURVE('',#6698,#6929); +#6929 = DEFINITIONAL_REPRESENTATION('',(#6930),#6934); +#6930 = LINE('',#6931,#6932); +#6931 = CARTESIAN_POINT('',(-0.,10.3)); +#6932 = VECTOR('',#6933,1.); +#6933 = DIRECTION('',(-1.,0.)); +#6934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6935 = ORIENTED_EDGE('',*,*,#6851,.F.); +#6936 = ADVANCED_FACE('',(#6937),#6511,.F.); +#6937 = FACE_BOUND('',#6938,.T.); +#6938 = EDGE_LOOP('',(#6939,#6967,#6988,#6989)); +#6939 = ORIENTED_EDGE('',*,*,#6940,.F.); +#6940 = EDGE_CURVE('',#6941,#6941,#6943,.T.); +#6941 = VERTEX_POINT('',#6942); +#6942 = CARTESIAN_POINT('',(-17.65,25.9369,-36.7353)); +#6943 = SURFACE_CURVE('',#6944,(#6949,#6956),.PCURVE_S1.); +#6944 = CIRCLE('',#6945,2.35); +#6945 = AXIS2_PLACEMENT_3D('',#6946,#6947,#6948); +#6946 = CARTESIAN_POINT('',(-20.,25.9369,-36.7353)); +#6947 = DIRECTION('',(0.,0.,-1.)); +#6948 = DIRECTION('',(1.,-0.,-0.)); +#6949 = PCURVE('',#6511,#6950); +#6950 = DEFINITIONAL_REPRESENTATION('',(#6951),#6955); +#6951 = LINE('',#6952,#6953); +#6952 = CARTESIAN_POINT('',(-0.,2.45)); +#6953 = VECTOR('',#6954,1.); +#6954 = DIRECTION('',(-1.,0.)); +#6955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6956 = PCURVE('',#6626,#6957); +#6957 = DEFINITIONAL_REPRESENTATION('',(#6958),#6966); +#6958 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6959,#6960,#6961,#6962, +#6963,#6964,#6965),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6959 = CARTESIAN_POINT('',(-2.35,0.)); +#6960 = CARTESIAN_POINT('',(-2.35,4.070319397787)); +#6961 = CARTESIAN_POINT('',(1.175,2.035159698893)); +#6962 = CARTESIAN_POINT('',(4.7,5.755839955993E-16)); +#6963 = CARTESIAN_POINT('',(1.175,-2.035159698893)); +#6964 = CARTESIAN_POINT('',(-2.35,-4.070319397787)); +#6965 = CARTESIAN_POINT('',(-2.35,0.)); +#6966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6967 = ORIENTED_EDGE('',*,*,#6968,.F.); +#6968 = EDGE_CURVE('',#6491,#6941,#6969,.T.); +#6969 = SEAM_CURVE('',#6970,(#6974,#6981),.PCURVE_S1.); +#6970 = LINE('',#6971,#6972); +#6971 = CARTESIAN_POINT('',(-17.65,25.9369,-39.1853)); +#6972 = VECTOR('',#6973,1.); +#6973 = DIRECTION('',(-0.,-0.,1.)); +#6974 = PCURVE('',#6511,#6975); +#6975 = DEFINITIONAL_REPRESENTATION('',(#6976),#6980); +#6976 = LINE('',#6977,#6978); +#6977 = CARTESIAN_POINT('',(-0.,-0.)); +#6978 = VECTOR('',#6979,1.); +#6979 = DIRECTION('',(-0.,1.)); +#6980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6981 = PCURVE('',#6511,#6982); +#6982 = DEFINITIONAL_REPRESENTATION('',(#6983),#6987); +#6983 = LINE('',#6984,#6985); +#6984 = CARTESIAN_POINT('',(-6.28318530718,-0.)); +#6985 = VECTOR('',#6986,1.); +#6986 = DIRECTION('',(-0.,1.)); +#6987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6988 = ORIENTED_EDGE('',*,*,#6490,.T.); +#6989 = ORIENTED_EDGE('',*,*,#6968,.T.); +#6990 = ADVANCED_FACE('',(#6991,#6994),#6626,.T.); +#6991 = FACE_BOUND('',#6992,.F.); +#6992 = EDGE_LOOP('',(#6993)); +#6993 = ORIENTED_EDGE('',*,*,#6611,.T.); +#6994 = FACE_BOUND('',#6995,.F.); +#6995 = EDGE_LOOP('',(#6996)); +#6996 = ORIENTED_EDGE('',*,*,#6940,.F.); +#6997 = ADVANCED_FACE('',(#6998),#6698,.F.); +#6998 = FACE_BOUND('',#6999,.T.); +#6999 = EDGE_LOOP('',(#7000,#7001,#7002,#7003)); +#7000 = ORIENTED_EDGE('',*,*,#6828,.F.); +#7001 = ORIENTED_EDGE('',*,*,#6800,.T.); +#7002 = ORIENTED_EDGE('',*,*,#6682,.T.); +#7003 = ORIENTED_EDGE('',*,*,#6915,.F.); +#7004 = ADVANCED_FACE('',(#7005),#6757,.F.); +#7005 = FACE_BOUND('',#7006,.T.); +#7006 = EDGE_LOOP('',(#7007,#7008,#7031,#7062)); +#7007 = ORIENTED_EDGE('',*,*,#6736,.F.); +#7008 = ORIENTED_EDGE('',*,*,#7009,.F.); +#7009 = EDGE_CURVE('',#7010,#6737,#7012,.T.); +#7010 = VERTEX_POINT('',#7011); +#7011 = CARTESIAN_POINT('',(-15.5,55.8369,-36.7353)); +#7012 = SEAM_CURVE('',#7013,(#7017,#7024),.PCURVE_S1.); +#7013 = LINE('',#7014,#7015); +#7014 = CARTESIAN_POINT('',(-15.5,55.8369,-36.7353)); +#7015 = VECTOR('',#7016,1.); +#7016 = DIRECTION('',(-0.,-0.,1.)); +#7017 = PCURVE('',#6757,#7018); +#7018 = DEFINITIONAL_REPRESENTATION('',(#7019),#7023); +#7019 = LINE('',#7020,#7021); +#7020 = CARTESIAN_POINT('',(-0.,-0.)); +#7021 = VECTOR('',#7022,1.); +#7022 = DIRECTION('',(-0.,1.)); +#7023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7024 = PCURVE('',#6757,#7025); +#7025 = DEFINITIONAL_REPRESENTATION('',(#7026),#7030); +#7026 = LINE('',#7027,#7028); +#7027 = CARTESIAN_POINT('',(-6.28318530718,-0.)); +#7028 = VECTOR('',#7029,1.); +#7029 = DIRECTION('',(-0.,1.)); +#7030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7031 = ORIENTED_EDGE('',*,*,#7032,.T.); +#7032 = EDGE_CURVE('',#7010,#7010,#7033,.T.); +#7033 = SURFACE_CURVE('',#7034,(#7039,#7046),.PCURVE_S1.); +#7034 = CIRCLE('',#7035,4.5); +#7035 = AXIS2_PLACEMENT_3D('',#7036,#7037,#7038); +#7036 = CARTESIAN_POINT('',(-20.,55.8369,-36.7353)); +#7037 = DIRECTION('',(0.,0.,-1.)); +#7038 = DIRECTION('',(1.,-0.,-0.)); +#7039 = PCURVE('',#6757,#7040); +#7040 = DEFINITIONAL_REPRESENTATION('',(#7041),#7045); +#7041 = LINE('',#7042,#7043); +#7042 = CARTESIAN_POINT('',(-0.,0.)); +#7043 = VECTOR('',#7044,1.); +#7044 = DIRECTION('',(-1.,0.)); +#7045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7046 = PCURVE('',#7047,#7052); +#7047 = PLANE('',#7048); +#7048 = AXIS2_PLACEMENT_3D('',#7049,#7050,#7051); +#7049 = CARTESIAN_POINT('',(-20.,55.8369,-36.7353)); +#7050 = DIRECTION('',(-0.,-0.,1.)); +#7051 = DIRECTION('',(-1.,0.,0.)); +#7052 = DEFINITIONAL_REPRESENTATION('',(#7053),#7061); +#7053 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7054,#7055,#7056,#7057, +#7058,#7059,#7060),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#7054 = CARTESIAN_POINT('',(-4.5,0.)); +#7055 = CARTESIAN_POINT('',(-4.5,7.79422863406)); +#7056 = CARTESIAN_POINT('',(2.25,3.89711431703)); +#7057 = CARTESIAN_POINT('',(9.,1.102182119233E-15)); +#7058 = CARTESIAN_POINT('',(2.25,-3.89711431703)); +#7059 = CARTESIAN_POINT('',(-4.5,-7.79422863406)); +#7060 = CARTESIAN_POINT('',(-4.5,0.)); +#7061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7062 = ORIENTED_EDGE('',*,*,#7009,.T.); +#7063 = ADVANCED_FACE('',(#7064),#6898,.F.); +#7064 = FACE_BOUND('',#7065,.T.); +#7065 = EDGE_LOOP('',(#7066,#7094,#7115,#7116)); +#7066 = ORIENTED_EDGE('',*,*,#7067,.F.); +#7067 = EDGE_CURVE('',#7068,#7068,#7070,.T.); +#7068 = VERTEX_POINT('',#7069); +#7069 = CARTESIAN_POINT('',(-17.65,55.8369,-36.7353)); +#7070 = SURFACE_CURVE('',#7071,(#7076,#7083),.PCURVE_S1.); +#7071 = CIRCLE('',#7072,2.35); +#7072 = AXIS2_PLACEMENT_3D('',#7073,#7074,#7075); +#7073 = CARTESIAN_POINT('',(-20.,55.8369,-36.7353)); +#7074 = DIRECTION('',(0.,0.,-1.)); +#7075 = DIRECTION('',(1.,-0.,-0.)); +#7076 = PCURVE('',#6898,#7077); +#7077 = DEFINITIONAL_REPRESENTATION('',(#7078),#7082); +#7078 = LINE('',#7079,#7080); +#7079 = CARTESIAN_POINT('',(-0.,2.45)); +#7080 = VECTOR('',#7081,1.); +#7081 = DIRECTION('',(-1.,0.)); +#7082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7083 = PCURVE('',#7047,#7084); +#7084 = DEFINITIONAL_REPRESENTATION('',(#7085),#7093); +#7085 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7086,#7087,#7088,#7089, +#7090,#7091,#7092),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#7086 = CARTESIAN_POINT('',(-2.35,0.)); +#7087 = CARTESIAN_POINT('',(-2.35,4.070319397787)); +#7088 = CARTESIAN_POINT('',(1.175,2.035159698893)); +#7089 = CARTESIAN_POINT('',(4.7,5.755839955993E-16)); +#7090 = CARTESIAN_POINT('',(1.175,-2.035159698893)); +#7091 = CARTESIAN_POINT('',(-2.35,-4.070319397787)); +#7092 = CARTESIAN_POINT('',(-2.35,0.)); +#7093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7094 = ORIENTED_EDGE('',*,*,#7095,.F.); +#7095 = EDGE_CURVE('',#6878,#7068,#7096,.T.); +#7096 = SEAM_CURVE('',#7097,(#7101,#7108),.PCURVE_S1.); +#7097 = LINE('',#7098,#7099); +#7098 = CARTESIAN_POINT('',(-17.65,55.8369,-39.1853)); +#7099 = VECTOR('',#7100,1.); +#7100 = DIRECTION('',(-0.,-0.,1.)); +#7101 = PCURVE('',#6898,#7102); +#7102 = DEFINITIONAL_REPRESENTATION('',(#7103),#7107); +#7103 = LINE('',#7104,#7105); +#7104 = CARTESIAN_POINT('',(-0.,-0.)); +#7105 = VECTOR('',#7106,1.); +#7106 = DIRECTION('',(-0.,1.)); +#7107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7108 = PCURVE('',#6898,#7109); +#7109 = DEFINITIONAL_REPRESENTATION('',(#7110),#7114); +#7110 = LINE('',#7111,#7112); +#7111 = CARTESIAN_POINT('',(-6.28318530718,-0.)); +#7112 = VECTOR('',#7113,1.); +#7113 = DIRECTION('',(-0.,1.)); +#7114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7115 = ORIENTED_EDGE('',*,*,#6877,.T.); +#7116 = ORIENTED_EDGE('',*,*,#7095,.T.); +#7117 = ADVANCED_FACE('',(#7118,#7121),#7047,.T.); +#7118 = FACE_BOUND('',#7119,.F.); +#7119 = EDGE_LOOP('',(#7120)); +#7120 = ORIENTED_EDGE('',*,*,#7032,.T.); +#7121 = FACE_BOUND('',#7122,.F.); +#7122 = EDGE_LOOP('',(#7123)); +#7123 = ORIENTED_EDGE('',*,*,#7067,.F.); +#7124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#7128)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#7125,#7126,#7127)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#7125 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#7126 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#7127 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#7128 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-04),#7125, + 'distance_accuracy_value','confusion accuracy'); +#7129 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +ENDSEC; +END-ISO-10303-21;