Template sensors for Single Inverter, Double Battery, Backup Interface with Production+Export/Import Meters

[shashchatter]

Hello!

After much back and forth between me, my installer and SolarEdge support, we have something that works with the SolarEdge cloud monitoring.

I am restarting my efforts with using SolarEdge Modbus Local.

I have a whole home backup config with one inverter (SE7600), two batteries (LG RESU1600 Prime), and a Backup Interface, with the Export/Import CTs installed in the backup interface. I have attached my SetApp screenshots below. I have everything on RS485-1, no "SolarEdge Leader" config, a single ModBus Multi meter configured as "Production + Export/Import" using Device ID 1.

ModBus multi detects the following devices:

solaredge_i1
solaredge_11_m1 (Production)
solaredge_11_m2 (Export/Import)
(Batteries are not detected - I plan to use solaredge_storage_level and solaredge_storage_power from the cloud integration in the absence of a better solution even though sampling frequency difference will be there.

I have looked at several example templates with single inverter+battery setup, but they all only have the M1 meter.

• Is there an example for a system similar to mine?
• Is there a component diageam like the one in:
  https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Sensors-for-Power-and-Energy#single-inverter-single-battery-single-import--export-meter

Thanks in advance!

Attachments:
startup.log
config_entry-solaredge_modbus_multi-01KN7VJ7TMMF5X6E0TS66Y6HTS.json