Use the interactive wizard to configure remote providers. Supported providers are Navidrome, Lyrion, Plex, Jellyfin, Emby, Spotify, Qobuz, Tidal, Bandcamp, Mixcloud, NetEase, Audiobookshelf, and YouTube Music:
cliamp setupThe wizard writes the provider keys into their section. It keeps your other keys and comments, and it leaves the rest of your config unchanged. The wizard drops the comment at the end of a key line that it rewrites.
The wizard checks the server connection during setup for Navidrome, Lyrion, Plex, Jellyfin, Emby, and Audiobookshelf. For Bandcamp, it checks the Subsonic credentials with an authenticated call. For NetEase, it checks the browser session. OAuth providers such as Spotify, Qobuz, and Tidal sign in later in the player. Tidal uses a link.tidal.com device code. The wizard does not check Mixcloud credentials. See cli.md for details.
cliamp searches for its config directory in this order:
CLIAMP_CONFIG_DIRXDG_CONFIG_HOME/cliamp- On Windows,
%APPDATA%\cliamp, unlessHOMEnames a directory other than the profile directory. If%APPDATA%\cliamphas noconfig.tomlandHOME/.config/cliamphas one, cliamp keeps the existing directory. HOME/.config/cliamp
The examples below use ~/.config/cliamp. On Windows, use %APPDATA%\cliamp unless you set a custom HOME.
For other settings, copy and edit the example config:
mkdir -p ~/.config/cliamp
cp config.toml.example ~/.config/cliamp/config.toml# Default volume in dB (range: volume_min to 6)
volume = 0
# Minimum volume floor in dB (range: -90 to 0, default: -50)
# Controls how low the volume control can go.
volume_min = -50
# Repeat mode: "off", "all", or "one"
repeat = "off"
# Start with shuffle enabled
shuffle = false
# Start with mono output (L+R downmix)
mono = false
# Audio output device name. Empty uses the system default output.
# Run cliamp --audio-device list and copy a name from the second column.
# See "Audio output device" below.
audio_device = ""
# Initial directory for the file browser ('o' key)
initial_directory = "~/Music"
# Shift+Left/Right seek jump in seconds
seek_large_step_sec = 30
# EQ preset: "Flat", "Rock", "Pop", "Jazz", "Classical",
# "Bass Boost", "Treble Boost", "Vocal", "Electronic", "Acoustic",
# "Hip-Hop", "R&B", "Loudness", "Late Night", "Podcast",
# "Small Speakers"
# Leave empty or "Custom" to use manual eq values below
eq_preset = "Flat"
# 10-band EQ gains in dB (range: -12 to 12)
# Bands: 70Hz, 180Hz, 320Hz, 600Hz, 1kHz, 3kHz, 6kHz, 12kHz, 14kHz, 16kHz
# Saved Custom curve; applied when eq_preset is "Custom" or empty
eq = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
# Manual EQ changes update this curve automatically. Cycling presets with e
# keeps it available, and both values are restored after restart.
# Visualizer mode (leave empty for default Bars)
# Options: Bars, BarsDot, Rain, BarsOutline, Bricks, Columns, ClassicPeak, Wave, Scatter, Flame, Retro, Pulse, Matrix, Binary, Sakura, Firework, Bubbles, Logo, Terrain, Scope, Heartbeat, Butterfly, Ascii, Firefly, Mosaic, Sand, Geyser, ClassicLED, Stereo, Mirror, Omarchy, RedSector, YinYang, Ethereal, None
# Mirror draws tapered Braille bars around a persistent horizontal center axis.
# ClassicPeak uses smooth bars and floating peak caps, with sampling aligned
# to audible playback and adaptive redraws for smooth motion.
# ClassicLED redraws at 30 FPS during playback, like the Winamp LED meter.
# Neighboring bands are averaged into each bar.
# YinYang koi chase each other across a wide strip, leaving on the right and
# coming back on the left. Taller panels have them circle a lily pad whose
# lotus follows recent bass levels, including after silence or time in the strip.
# Ethereal draws Flame-style Braille pixels: drifting clouds with bright
# highlights and treble-reactive stars, leaving the background untouched.
# Inspired by Omarchy's Ethereal cosmic wallpaper.
# It follows terminal colors by default and the selected UI theme.
# Omarchy is not required.
visualizer = "Bars"
# Visualizer volume linking (default: true)
# When true, bar height follows the current volume level (classic behavior).
# Set to false to decouple the visualizer from volume — bars stay visible
# even at very low volume levels.
vis_volume_linked = true
# Visualizer height in rows (default: 7), used at the full layout tier.
# Extra rows are taken from the playlist below, and the layout caps the value
# at what the terminal can spare, always leaving one playlist row. Range 1-40.
# The full screen visualizer (V) is unaffected: it always fills the terminal.
vis_rows = 7
# Reduce CPU usage by lowering UI cadence and disabling visualization.
# This has the same effect as starting with --low-power.
low_power = false
# Simplified mode: artist/title and time strip without a visualizer or playlist.
# No visualizer or playback controls are shown.
simplified = false
# Hide the key-binding hint bar above the status line.
hide_help_bar = false
# Start with the playlist expanded, the state Ctrl+X toggles (default: false).
# The simplified playback screen has no playlist, but its provider and overlay
# lists do, and they start expanded too.
expanded = false
# Close the Settings pane beside the playlist (Ctrl+B toggles and saves).
hide_settings_pane = false
# Show highlighted-playlist metadata below Settings (Ctrl+I toggles and saves).
show_metadata = false
# Empty space around the UI: columns on the left and right (0-10, default 3)
# and rows above and below (0-5, default 1).
padding_horizontal = 3
padding_vertical = 1
# UI theme name (see available themes in ~/.config/cliamp/themes/)
theme = "Tokyo Night"
# Log level: "debug", "info", "warn", or "error" (default "info")
# Logs are written to ~/.config/cliamp/cliamp.log
log_level = "info"
Stereo shows separate left and right horizontal LED meters with held peak markers.
cliamp adapts its playback screen to the terminal size:
| Terminal size | Layout |
|---|---|
At least 80x24 |
Two columns below the seek bar, seven visualizer rows (see vis_rows), and detailed source controls |
At least 56x16 |
Compact controls and five visualizer rows |
At least 40x10 |
Minimal playback, list, seek bar, and help layout |
Smaller than 40x10 |
Resize message only |
The tiers use the full terminal size. padding_horizontal and
padding_vertical set the empty space between the terminal edge and the UI,
in columns and rows. The defaults are 3 and 1. cliamp clamps
padding_horizontal to 0-10 and padding_vertical to 0-5. On a small
terminal, cliamp reduces the padding so that the UI keeps at least one column
and one row.
At the full tier the playback screen splits below the seek bar: the playlist
fills the left column and a Settings pane fills the right one. The pane reads
as a signal chain: the source (SRC), then volume (VOL) and the EQ preset
with its ten bands, then how the list plays — shuffle (SHF), repeat (RPT),
and speed (SPD) — and last the live network counters for a stream (NET).
Shuffle and repeat move out of the playlist header here, which keeps its
counts: queue, favorites, and position. The rows those
controls used to occupy above and below the playlist go to the playlist itself.
The title, track line, time, visualizer, seek bar, and hint bar stay full width.
Narrower terminals, simplified mode, overlays, and list views keep the stacked
single-column layout, with shuffle and repeat back in the header.
In full and compact playback layouts, Tab cycles from Playlist through Source,
Volume, EQ, Shuffle, Repeat, and Speed, then returns to Playlist. Shift+Tab
reverses the order. Only visible controls participate; Source is skipped when
only one provider is available. See keybindings for
each control's keys.
The pane is open unless hide_settings_pane = true. Ctrl+B toggles it and
writes the new value back to that key, so it comes back the way you left it.
With the pane closed the playlist takes the full
frame width and one chrome row is kept above it: the active source on the left
and the volume meter on the right. The EQ readout, the speed indicator, and the
download counters are not drawn — e still cycles the EQ preset and [ / ]
still change speed, but their readouts are gone, so Tab skips the EQ and
speed stops rather than landing on a control you cannot see. Shuffle and repeat
return to the playlist header. The two rows this frees go to the playlist.
Closing Settings also hides Metadata without changing show_metadata.
A short body — a tall vis_rows leaves the pane few rows — sheds rows by how
readily they are missed rather than by position: the network counters go first,
then the EQ band gains, then shuffle and repeat together. Hidden controls are
also skipped by Tab and Shift+Tab. Those groups drop whole, so the pane can end
up a row shorter than it was given. A playlist header too narrow for all its
badges drops whole badges off the tail rather than clipping one mid-word.
simplified = true replaces the main playback view with the current track
artist/title, time, and seek-progress strip. It hides the visualizer, playback
controls, and playlist. Provider browsing and overlays keep their list-focused
layout. Start one session with cliamp --simplified.
hide_help_bar = true removes the key-binding hint bar above the status line
and gives that row back to the playlist. The full keymap stays available with
?. Ctrl+G toggles the bar and writes the new value back to this key, so the
bar comes back the way you left it. Use cliamp --no-help-bar to hide it for
one session, or cliamp --help-bar to show it despite this setting. Simplified
mode draws neither the hint bar nor a playlist, so it is unaffected by this
setting.
expanded = true starts with the playlist at the expanded height, so the list
gets every body row the terminal has left instead of the shorter default, and
Ctrl+X is not needed on every launch. The key keeps working and collapses the
view as before. Start one session with cliamp --expanded, or --no-expanded
to start collapsed despite this setting.
List views such as provider browsing, file selection, queues, playlists, search results, themes, and keybindings use a content-first layout. This layout replaces the visualizer and detailed controls with a compact now-playing summary. It leaves more rows for navigation. The visualizer picker keeps its live preview.
The read-only Metadata section sits below Settings and is hidden by default.
In the main playback view, Ctrl+I toggles it and saves the
top-level show_metadata preference. The default is show_metadata = false,
so the existing layout stays unchanged until you enable it. Metadata is not a
separate Tab stop, and the toggle is inactive while an input field is active.
Ctrl+I requires enhanced keyboard reporting to distinguish it from Tab.
On terminals that send both keys identically, Tab navigation takes precedence;
use lowercase i for full info or set show_metadata = true in the config.
Metadata describes the highlighted playlist item, not necessarily the item currently playing: a song, podcast episode, or radio stream. Moving the highlight uses fields already loaded on that track, with no provider or network lookup. Provider browsers and other list views do not show the section.
Available fields are Title, Artist (Show for podcast episodes), Album, Genre (Tags for live radio), Date or Year, Track or Episode, and Length. Album is omitted when it duplicates the artist/show. A podcast publication Date takes precedence over Year. Radio can also show Country, Region, Codec, Bitrate in kbps, and Type: Live radio. A yt-dlp stream that is live shows Type: Live stream. Live now-playing text appears as Playing only when the selected stream is the one playing. Unknown fields are omitted.
In the full two-column layout, opening Metadata can borrow visualizer rows,
keeping at least one row when the visualizer is enabled. It does not overwrite
vis_rows; closing Metadata restores the configured height as space allows.
It never removes the six direct settings (Source, Volume, EQ, Shuffle, Repeat,
Speed) to make room. If there is no room for details after those controls, the
section stays hidden. When fields exceed the section's row budget, it shows
i: more details.
The compact Metadata section omits Path. From the playlist, lowercase i opens
the full, scrollable info view for the same highlighted item, including Path.
Use Up/Down or j/k to scroll, and i or Esc to close it.
When enabling Metadata in a narrow or simplified layout, with Settings closed,
or with a sidebar too short for details, Ctrl+I opens that full info overlay
instead. The preference remains saved so the section appears when you return
to a wide playback layout with enough room and Settings open.
audio_device selects the output device when cliamp starts. Leave it empty to
use the system default output. To find the device names, run this command:
cliamp --audio-device listThe command prints the description and the name of each device, then exits.
A * marks the active device. Put the name in audio_device:
audio_device = "alsa_output.usb-FiiO_K5_Pro-00.analog-stereo"- On Linux, cliamp sets
PIPEWIRE_NODEto the name before it opens the audio output. PipeWire then sends the cliamp stream to that device. Without PipeWire, the key has no effect. - On macOS, cliamp makes the device the system default output while it runs. It restores the previous default output when it exits. The value can be the name or the description.
- On Windows, the key has no effect at startup. The
ddevice picker changes the system default output instead.
When you select a device with d or cliamp device <name>, the TUI saves it to
audio_device. To use a different device for one session, run
cliamp --audio-device <name>.
cliamp reads a subset of TOML. These rules apply to every key:
- Put a string in double quotes or single quotes. cliamp removes one pair of quotes.
- Inside double quotes, write
\\for a backslash and\"for a double quote. cliamp keeps every other backslash as you type it, so"D:\new"stays a Windows path. - Single quotes are literal. cliamp decodes no escapes inside them.
- An unquoted string also works. cliamp keeps all of its text, including a
#. - A bool is
true,false,torfin any letter case.1and0also work. cliamp ignores any other value and keeps the default. - A number such as
volume,speedor aneqband must be finite. cliamp ignoresnan,infand any other text and keeps the default. - In a list, a comma inside a quoted item stays part of the item, as in
libraries = ["Rock, Pop", "Jazz"]. - To add a comment at the end of a line, put whitespace and then
#. This works after a quoted string, a number, a bool, a list in square brackets such aseqorlibraries, or a section header such as[navidrome]. After a closing quote or a closing square bracket, the whitespace is optional. After an unquoted string, the#and the text after it stay part of the value. This rule also applies to an unquoted last string item of a list without square brackets, such aslibraries = Music, Jazz # x. - A plugin gets each key of its
[plugins.<name>]section as a string. cliamp readsenabled, and thedisabled,allowed_binariesandallowed_private_addresseslists of[plugins], with these rules.
volume = -6 # quieter start
shuffle = True # any letter case
eq = [3, 2, 0, 0, 0, 0, 0, 0, 1, 2] # custom curve
initial_directory = 'D:\Music' # single quotes keep backslashes
[navidrome] # home server
password = "back\\slash\"quote" # reads as back\slash"quoteSet a string value in config.toml to $VAR_NAME or ${VAR_NAME} to read it from an environment variable. This keeps passwords, tokens, and client secrets out of the file.
[navidrome]
url = "https://music.example.com"
user = "alice"
password = "${NAVIDROME_PASSWORD}"
[lyrion]
url = "http://nas.local:9000"
user = "alice"
password = "${LYRION_PASSWORD}"
# show_unplayable = true # include plugin-contributed tracks and playlists
[plex]
url = "http://plex.local:32400"
token = "$PLEX_TOKEN"
[jellyfin]
url = "https://jelly.example.com"
token = "${JELLYFIN_TOKEN}"
[emby]
url = "https://emby.example.com"
token = "${EMBY_TOKEN}"
[audiobookshelf]
url = "https://abs.example.com"
token = "${AUDIOBOOKSHELF_TOKEN}"
[ytmusic]
client_id = "${YTMUSIC_CLIENT_ID}"
client_secret = "${YTMUSIC_CLIENT_SECRET}"
# Optional: resolve full playlists from list= URLs (default true). Set to false to strip playlist params.
# expand_playlist = true
[mixcloud]
access_token = "${MIXCLOUD_ACCESS_TOKEN}"Rules:
- Interpolation occurs only when the entire value is
$NAMEor${NAME}. cliamp keeps mixed values such as"p@$$word"literally. No escaping is required. - Variable names match
[A-Za-z_][A-Za-z0-9_]*. - If the variable is unset, the value is empty (the same as if you had left it blank).
- cliamp always reads a whole
$NAMEor${NAME}value from the environment. A password such as$Secret1cannot be stored as literal text. cliamp setupaccepts a$NAMEor${NAME}value and writes it as you type it. It checks the server with the value of the variable. It rejects a reference to an unset or empty variable.- Works for any string field, including plugin config under
[plugins.<name>].
Each provider section turns on its provider in one of three ways:
| Rule | Providers | The provider starts when |
|---|---|---|
| Credentials | Navidrome, Lyrion, Bandcamp, Plex, Jellyfin, Emby, Audiobookshelf, Telegram | The section holds the required credentials. Lyrion needs only url. Bandcamp needs user and password (its url is optional); Telegram needs api_id and api_hash. |
| Section | Spotify, Qobuz, Tidal, YouTube Music | The section header exists. Set enabled = false to turn the provider off. |
| Opt-in | SoundCloud, Mixcloud, NetEase, Yandex | The section sets enabled = true. Yandex also needs token. |
Radio and podcasts are always on. Their sections only tune them.
# Section rule: the header alone turns on Tidal.
[tidal]
# Opt-in rule: SoundCloud needs the enabled line.
[soundcloud]
enabled = trueSet the provider that cliamp opens at start:
provider = "cliamp"The default, cliamp, opens on the cliamp radio channels. See radio.md.
Valid values: cliamp (default), radio, podcast, navidrome, lyrion, plex, jellyfin, emby, spotify, qobuz, tidal, bandcamp, soundcloud, mixcloud, netease, yandex, audiobookshelf, telegram, yt, youtube, ytmusic. The --provider flag also accepts abs for audiobookshelf.
You can also override this setting on the CLI: cliamp --provider jellyfin.
When provider names a provider that is not configured, cliamp opens on cliamp radio. The status line then shows the setup step for that provider.
Podcasts is always registered: no enabled setting, API key, account, or setup
wizard is needed. Start with cliamp --provider podcast, or set the top-level
provider = "podcast" in config.toml.
The optional [podcast] block selects the country for Apple's top 100 chart:
[podcast]
country = "no"country is a two-letter country code, defaulting to "us" without location
detection. It affects charts only, not show searches, categories, subscriptions,
or publisher feeds. Subscriptions are saved in podcast_subscriptions.json in
the config directory. See podcasts.md for discovery and controls.
SoundCloud is optional. Add this section to ~/.config/cliamp/config.toml to register the provider:
[soundcloud]
enabled = trueAfter you enable SoundCloud, use Ctrl+F to search. Pasted SoundCloud URLs play through yt-dlp. The empty browse view contains search-backed genre playlists: Trending, Hip-Hop, Electronic, House, Lo-Fi, Indie, and Pop.
SoundCloud official chart and discover endpoints return 404 through yt-dlp. cliamp cannot show anonymous real chart data. The genre playlists use search results. Result quality varies but reflects current uploads.
Set a username to show that profile tracks, likes, and reposts in the browse view:
[soundcloud]
enabled = true
user = "yourname"Three playlists appear for soundcloud.com/yourname: Tracks, Likes, and Reposts. This works for any public profile.
SoundCloud closed its OAuth program in 2014. The bring-your-own-client_id method that Spotify uses is not available. Instead, point yt-dlp to an existing browser session. It reads your SoundCloud login from the browser cookie jar:
[soundcloud]
enabled = true
user = "yourname"
cookies_from = "firefox" # or chrome, chromium, brave, edge, opera, safari, vivaldiWith cookies set, yt-dlp can stream subscriber-gated tracks (SoundCloud Go+) and access private likes and playlists that your account can access. The same cookies apply to player yt-dlp calls. Playback uses your signed-in session.
Requires yt-dlp on PATH.
Mixcloud is optional. Public recent releases, popular shows, global show browsing, the live category catalog, Latest/Popular genre charts, genre and tag search, native show search, direct creator jumps, and playback need no account:
[mixcloud]
enabled = trueAdd username for your following stream, activity, uploads, read-only show
favorites, listening history, collections, and followed-creator browsing. An
optional developer access_token sets /me/ as the account identity and adds
Listen Later. cookies_from gives yt-dlp your signed-in browser session for
playback that requires it.
[mixcloud]
enabled = true
username = "yourname"
access_token = "${MIXCLOUD_ACCESS_TOKEN}"
cookies_from = "firefox"
styles = ["ambient", "deep-house", "jazz", "techno"]
max_items = 100
stream_creators = 20The styles list is also the local genre-favorites list for the provider. In
the Genres browser, / filters and searches the complete tag catalog. f
adds or removes a style as one action and refreshes its Latest/Popular provider
rows. These favorites do not change the Mixcloud website account.
See mixcloud.md for the feature matrix, provider-pane inventory, navigation and keybindings, favorite terminology, OAuth-token setup, signed-in playback, resume, seeking, and upstream limitations.
NetEase is optional and uses an existing browser session. Sign in at music.163.com, then run:
cliamp setupSelect NetEase Cloud Music and the browser that you used to sign in. The menu lists common browsers. Select the custom option only for profile-specific values. The setup wizard validates the session and writes:
[netease]
enabled = true
cookies_from = "chrome"
user_id = "your-account-user-id"After you enable NetEase, the provider shows liked songs, created playlists, saved playlists, and public charts. Use Ctrl+F to search. Playback uses yt-dlp with the same browser cookie source.
If yt-dlp cannot read the browser cookies, for example with the DPAPI error on Windows, export the music.163.com cookies to a Netscape-format cookies.txt file and set cookies_file = "/path/to/cookies.txt" instead. See netease.md.
The Radio provider is always on. The [radio] block only tunes it:
[radio]
country = "NO"country is your home country as an ISO 3166-1 alpha-2 code. It puts a "near you" row at the top of the radio pane and offers that country's regions in the country browser.
Leave it unset and cliamp does not work out where you are. It offers instead: the radio pane shows a "Use my location" row, and only if you accept does it read your country from the system timezone, then the locale, with no network call. Your answer is written here either way, so you are asked once. Set it to "none" to decline up front. See radio.md.
Pinned countries live in ~/.config/cliamp/radio_countries.toml and are written by pressing f in the country browser, so you do not normally edit that file by hand.
Add stations to ~/.config/cliamp/radios.toml:
[[station]]
name = "Jazz FM"
url = "https://jazz.example.com/stream"
[[station]]
name = "Ambient Radio"
url = "https://ambient.example.com/stream.m3u"These stations appear with the built-in cliamp radio in the Radio provider. Each one needs its own [[station]] header. cliamp warns about any other section header in this file, such as [[stations]], and skips the entries under it.
See audio-quality.md for sample rate, buffer, bit depth, and resample quality settings.
cliamp uses ALSA for audio on Linux. WSL2 does not expose ALSA hardware directly. WSLg provides a PulseAudio server that ALSA can use.
If you see ALSA lib pcm.c: Unknown PCM default, use these two steps:
1. Install the ALSA PulseAudio plugin:
sudo apt install libasound2-plugins2. Create ~/.asoundrc to route ALSA through PulseAudio:
cat > ~/.asoundrc << 'EOF'
pcm.default pulse
ctl.default pulse
EOFWSLg must be active. echo $PULSE_SERVER should print a path. If it is empty, use Windows 11 with WSLg enabled. Run wsl --shutdown, then reopen the terminal.
AAC, ALAC (.m4a), Opus, WMA, and the audio streams of .mp4 and .webm files
require ffmpeg:
# Arch
sudo pacman -S ffmpeg
# Debian/Ubuntu
sudo apt install ffmpeg
# macOS
brew install ffmpegMP3, WAV, FLAC, and OGG work without ffmpeg.
cliamp starts a local file that ffmpeg decodes in the background and shows
Buffering... until ffmpeg sends audio. The UI stays responsive on a slow
disk or network mount.
By default, TUI Ctrl+S saves yt-dlp downloads and temporary audio files in
~/Music/cliamp. To use another directory, add this setting and restart cliamp:
[downloads]
directory = "/media/usb/CLAPt/Music"An empty value keeps the default. Relative paths are rejected; literal ~ is not
expanded. Missing directories are created. Mount external drives first because
cliamp does not check mount status. The IPC save operation uses the same
directory, in the TUI and in headless mode. Files remain ordinary local audio
files and are not automatically substituted into online playlists.
cliamp reads the proxy variables HTTP_PROXY, HTTPS_PROXY, ALL_PROXY and
NO_PROXY. The lowercase names also work. Audio streams, provider API and
sign-in requests, lyrics, radio and podcast directories, feeds, remote
playlists, plugin installs and cliamp upgrade use them.
ALL_PROXY=socks5h://127.0.0.1:1080 cliamp
HTTPS_PROXY=http://proxy.example:3128 cliampHTTP_PROXYapplies tohttp://requests, andHTTPS_PROXYapplies tohttps://requests.ALL_PROXYapplies when the variable for the scheme is not set. Audio streams useALL_PROXYonly for asocks5://orsocks5h://proxy.NO_PROXYlists the hosts that cliamp connects to directly. cliamp does not send a request forlocalhostor a loopback address through a proxy.- API requests accept a user and password in a SOCKS5 proxy URL, such as
socks5h://user:pass@proxy.example:1080. Audio streams refuse a SOCKS5 proxy URL with a user and password, because SOCKS5 sends them as clear text. - yt-dlp reads these variables itself.
- ffmpeg opens HLS streams, and remote streams in a format that cliamp does
not decode itself. ffmpeg reads only the lowercase
http_proxyandno_proxyvariables. It uses only anhttp://proxy, and it ignoresHTTPS_PROXY,ALL_PROXYand SOCKS5 proxies. - The Spotify playback connection and the
cliamp.httpLua plugin API do not follow these rules.
To send the ffmpeg streams through a proxy too, also set http_proxy:
HTTPS_PROXY=http://proxy.example:3128 http_proxy=http://proxy.example:3128 cliamp