Merge branch 'devel' into 0.7.x

Author: cp2004

docs/configuration/printing-effects.md

@@ -36,13 +36,13 @@ All the standard effects available, with fancy visualisations!
 
 Sets all LEDs to one colour, forever.
 
-![](../.gitbook/assets/solid_colour.gif)
+![](../.gitbook/assets/solid_colour%20%284%29.gif)
 
 ### Colour Wipe
 
 Wipes colour across the strip pixel by pixel, then clears it pixel by pixel.
 
-![](../.gitbook/assets/color_wipe.gif)
+![](../.gitbook/assets/color_wipe%20%284%29.gif)
 
 ### Colour Wipe V2
 
@@ -54,13 +54,13 @@ Wipes colour pixel by pixel, as above, but to clear it turns around and heads ba
 
 Fades brightness up and down. Looks better in real life than the visualisation below!
 
-![](../.gitbook/assets/pulse%20%283%29.gif)
+![](../.gitbook/assets/pulse%20%283%29%20%281%29.gif)
 
 ### Bounce
 
 Sends a pulse of light bouncing from one side of your strip to the other.
 
-![](../.gitbook/assets/bounce%20%282%29.gif)
+![](../.gitbook/assets/bounce%20%282%29%20%281%29.gif)
 
 ### Solo Bounce
 
@@ -72,13 +72,13 @@ Sends just a single pixel from one side to the other, bouncing about.
 
 Cycles all the LEDs through the rainbow together.
 
-![](../.gitbook/assets/rainbow%20%282%29.gif)
+![](../.gitbook/assets/rainbow%20%282%29%20%281%29.gif)
 
 ### Rainbow Cycle
 
 Rainbow that cycles across the strip, so a full rainbow is across the whole strip at once.
 
-![](../.gitbook/assets/rainbow_cycle%20%282%29.gif)
+![](../.gitbook/assets/rainbow_cycle%20%282%29%20%281%29.gif)
 
 ### Crossover
 
@@ -90,7 +90,7 @@ Two pixels bouncing in opposite directions, crossing over in the middle.
 
 Sets all LEDs to a random colour, then changes a random pixel, to a new random colour
 
-![](../.gitbook/assets/random%20%283%29.gif)
+![](../.gitbook/assets/random%20%283%29%20%281%29.gif)
 
 ### Bouncy Balls
 

docs/documentation/m150-intercept.md

@@ -31,7 +31,7 @@ M150 W100       # Sets to white, at 100 intensity
 M150 R255 P200  # Sets LEDs to red, at 200 brightness
 ```
 
-#### What does the W parameter do?
+## What does the W parameter do?
 
 On a standard RGB WS281x strip, the W parameter sets an equal value of R, G and B on the LEDs.
 

docs/documentation/rest-api.md

@@ -51,7 +51,7 @@ SimpleAPI Command
 {% endapi-method-summary %}
 
 {% api-method-description %}
-Send commands to the plugin, to make it do something. 
+Send commands to the plugin, to make it do something.
 {% endapi-method-description %}
 
 {% api-method-spec %}

docs/guides/setup-guide-1/wiring-your-leds.md

@@ -39,7 +39,7 @@ Wiring is as follows:
 Make sure you have a common ground between the power supply and Pi.
 {% endhint %}
 
-![Wiring with no shifter](../../.gitbook/assets/wiring_no_shift%20%283%29.png)
+![Wiring with no shifter](../../.gitbook/assets/wiring_no_shift%20%283%29%20%281%29.png)
 
 ### Level Shifting Chip
 

octoprint_ws281x_led_status/effects/standard.py

@@ -65,16 +65,17 @@ def set_pixel(pixel, pixel_color):
 
 
 def simple_pulse(strip, queue, color, delay, brightness_manager, *args, **kwargs):
+    max_brightness = brightness_manager.max_brightness
+    solid_color(
+        strip=strip,
+        queue=queue,
+        color=color,
+        brightness_manager=brightness_manager,
+        wait=False,
+    )
+
     while True:
-        max_brightness = brightness_manager.max_brightness
         brightness_manager.set_brightness(1)
-        solid_color(
-            strip=strip,
-            queue=queue,
-            color=color,
-            brightness_manager=brightness_manager,
-            wait=False,
-        )
 
         for direction in DIRECTIONS:
             for b in (
@@ -208,7 +209,7 @@ def blink(strip, queue, color, delay, brightness_manager, *args, **kwargs):
                 brightness_manager=brightness_manager,
                 wait=False,
             )
-            for _ms in range(int(delay / 2)):
+            for _ms in range(int(delay) // 2):
                 if not q_poll_milli_sleep(2, queue):
                     # We do it this way so we can check the q more often, as for blink
                     # delay may be high. Otherwise the effect may end up blocking the

octoprint_ws281x_led_status/static/js/ws281x_led_status.js

@@ -4,7 +4,7 @@
  * Copyright (c) Charlie Powell 2020-2021 - released under the terms of the AGPLv3 License
  */
 
-const ko = window.ko;
+let ko = window.ko;
 
 $(function () {
     function ws281xLedStatusNavbarViewModel(parameters) {
@@ -155,7 +155,9 @@ $(function () {
         };
 
         self.sendTestCommand = function (color) {
-            OctoPrint.simpleApiCommand("ws281x_led_status", "test_led", { color } );
+            OctoPrint.simpleApiCommand("ws281x_led_status", "test_led", {
+                color,
+            });
         };
 
         self.advancedStripOpen = ko.observable(false);