60fps (Higt FPS) has some issue

[higa54]

Issue 1
If you set the frame rate to 60 fps in the Bridge settings and also set the start frame to a value other than 0, the VMD file is not output.

Issue 2
Set the frame rate to 60 fps in the Bridge settings and set the start frame to a value between 0 and the last frame.
If you then set the AVI export frame rate to 30, the VMD file is not output.
I believe this contradicts the statement in the Ver 1.1.0 patch notes: “The AVI export FPS does not need to match.”

A common issue with both Problem 1 and Problem 2 is that the window shown above does not appear.

The conditions for successfully outputting a HighFPS VMD are:
① Set the Bridge start frame to 0.
② Match the FPS of the AVI and Bridge.
This was the solution that worked for me.

This issue does not occur at 30 fps.

[rintrint]

AVI export FPS should be greater than or equal to the FPS set in MMDBridge. The two FPS values do not need to match.
Also, it is best to keep the two FPS values as an integer multiple of each other.

For Example:

AVI export FPS	MMDBridge FPS	Result
30	30	OK
60	30	OK
30	60	Not OK
60	60	OK
120	30	OK
120	60	OK
120	120	OK