"Movie capture error..." / "Movie capture finished (0 frames)" / "*** Error (-1: 'Unspecified error') ***"
If your output looks something like:
$ webcamize
...
[FATAL] gphoto2: ...
ERROR: Movie capture error... Exiting.
Movie capture finished (0 frames)
*** Error (-1: 'Unspecified error') ***
This almost always means your device is unsupported (and almost always because of a bad or incomplete PTP implementation). Complain to the manufacturer!
Consult the supported devices list—if your device is on there, feel free to open a new issue; otherwise, please do not!
"Possibly missing v4l2loopback module"
Some people may see this every time they run webcamize; it's not always the main issue. If you don't usually see it, though, it's probably the main issue. If your output looks like this below, there is a number of steps you can take to fix the problem.
$ webcamize
[WARN] Possibly missing v4l2loopback module
...
[WARN] Pipeline exited with non-0 status (1)
...
- Ensure you have
v4l2loopback installed. Re-install it if necessary.
- Double check that you can run
modinfo without sudo
- Reboot—kernel updates will prevent the module from working until your system is rebooted.
"ioctl(VIDIOC_G_FMT): Invalid argument" / "Could not write header (incorrect codec parameters ?): Invalid argument"
If your output looks something like:
$ webcamize
...
[WARN] Pipeline exited with non-0 status (1)
[FATAL] ffmpeg: ...
...
[video4linux2,v4l2 @ 0x561ce7fba380] ioctl(VIDIOC_G_FMT): Invalid argument
[out#0/video4linux2,v4l2 @ 0x561ce7fc0e00] Could not write header (incorrect codec parameters ?): Invalid argument
[vost#0:0/rawvideo @ 0x561ce7fbc4c0] Error initializing output stream:
This usually means something is wrong with your v4l2loopback module. To start diagnosing the problem, run the command below which will attempt to unload the module:
$ sudo modprobe -r v4l2loopback
If this command returns something like modprobe: FATAL: Module v4l2loopback is in use., reboot your system. This is an extremely common issue with v4l2loopback where it gets stuck "in use," and unfortunately rebooting is the only consistent way to fix it.
"Movie capture error..." / "Movie capture finished (0 frames)" / "*** Error (-1: 'Unspecified error') ***"
If your output looks something like:
This almost always means your device is unsupported (and almost always because of a bad or incomplete PTP implementation). Complain to the manufacturer!
Consult the supported devices list—if your device is on there, feel free to open a new issue; otherwise, please do not!
"Possibly missing v4l2loopback module"
Some people may see this every time they run webcamize; it's not always the main issue. If you don't usually see it, though, it's probably the main issue. If your output looks like this below, there is a number of steps you can take to fix the problem.
v4l2loopbackinstalled. Re-install it if necessary.modinfowithoutsudo"ioctl(VIDIOC_G_FMT): Invalid argument" / "Could not write header (incorrect codec parameters ?): Invalid argument"
If your output looks something like:
This usually means something is wrong with your v4l2loopback module. To start diagnosing the problem, run the command below which will attempt to unload the module:
$ sudo modprobe -r v4l2loopbackIf this command returns something like
modprobe: FATAL: Module v4l2loopback is in use., reboot your system. This is an extremely common issue with v4l2loopback where it gets stuck "in use," and unfortunately rebooting is the only consistent way to fix it.