Arduino 1.8.19 demo GetFingerprint.ino error work

[Dylan700Manes]

Hello,
First of all, thank you for this project
Finally available on one of the platforms
(arduino √ ,c++,micropython)
Problems After importing in .zip
in arduino library then commented the log_e
Or /else{log_e("no");}/
to avoid ::
Arduino/libraries/WvFingerprint/WvFingerprint.cpp:384:13: error: 'log_e' was not declared in this scope

I notice after installing the program
:: GetFingerprint.ino
that the serial port :: /dev/ttyACM0 does not work.

On the other hand when I comment the line n°11
// WwFingerprint myfp(Serial1, RST_PIN, WAKE_PIN);
As well as the lines linked to it
The /dev/ttyACM0 appears and so the commands
Serial.println("work");
On the other hand, if you uncomment only ::
WwFingerprint myfp(Serial1, RST_PIN, WAKE_PIN);

/dev/ttyACM0 does not work.
Given the complexity of this project
C++X, Micropython X, Arduino √
Could you help me to get the right instructions to make this example work on arduino? Thanks

C++ part (C++ usage)
at compile time
cmake ..;make;cp .uf2 /media//RPI-RP2/
(See the image)