asus_rt-ac51u_Qos.config

[mir-abdu]

Target Vendor/Product (support only Ralink RT3883/MT7620/MT7621/MT7628)

CONFIG_VENDOR=ASUS
CONFIG_PRODUCT=MT7620

Target ProductID (board select, max 12 symbols)

CONFIG_FIRMWARE_PRODUCT_ID="RT-AC51U"

############################################################

Linux kernel configuration

############################################################

Force MT7620 CPU clock to 600MHz (override Uboot settings)

#CONFIG_FIRMWARE_CPU_600MHZ=y

Enable MT7620 CPU sleep mode (downclock to 200MHz on idle)

#CONFIG_FIRMWARE_CPU_SLEEP=y

Kernel driver select for WiFi AP 2.4GHz

2.7 = MT7620 v2.7.2.0

3.0 = MT7620 v3.0.4.0

CONFIG_FIRMWARE_WIFI2_DRIVER=2.7

Kernel driver select for WiFi AP 5GHz

3.0 = MT7610E v3.0.0.9

CONFIG_FIRMWARE_WIFI5_DRIVER=3.0

Enable IPv6 support

CONFIG_FIRMWARE_ENABLE_IPV6=y

Enable USB support

CONFIG_FIRMWARE_ENABLE_USB=y

Enable NTFS filesystem support via Paragon "ufsd" driver. ~0.4MB

CONFIG_FIRMWARE_ENABLE_UFSD=y

Enable FAT/FAT32 filesystem support. ~0.1MB

#CONFIG_FIRMWARE_ENABLE_FAT=y

Enable exFAT (FAT/FAT32 too) filesystem support. ~0.12MB

CONFIG_FIRMWARE_ENABLE_EXFAT=y

Enable EXT2 filesystem support. ~0.1MB

#CONFIG_FIRMWARE_ENABLE_EXT2=y

Enable EXT3 filesystem support. ~0.2MB

#CONFIG_FIRMWARE_ENABLE_EXT3=y

Enable EXT4 (EXT3/2 too) filesystem support. ~0.4MB

CONFIG_FIRMWARE_ENABLE_EXT4=y

Enable XFS filesystem support. ~0.6MB

#CONFIG_FIRMWARE_ENABLE_XFS=y

Enable Apple HFS+ filesystem support. ~0.1MB

#CONFIG_FIRMWARE_ENABLE_HFS=y

Enable FUSE (filesystems in userspace) support. ~0.1MB

CONFIG_FIRMWARE_ENABLE_FUSE=y

Enable swap files/partitions support. ~0.05MB

CONFIG_FIRMWARE_ENABLE_SWAP=y

Include UVC camera modules. ~0.2MB

CONFIG_FIRMWARE_INCLUDE_UVC=y

Include USB-HID modules. ~0.2MB

#CONFIG_FIRMWARE_INCLUDE_HID=y

Include USB-Serial modules (e.g. pl2303). ~0.03MB

CONFIG_FIRMWARE_INCLUDE_SERIAL=y

Include USB-Audio modules ~0.46MB

#CONFIG_FIRMWARE_INCLUDE_AUDIO=y

Include XFRM (IPsec) modules & iptables extension ~ 0.2MB

#CONFIG_FIRMWARE_INCLUDE_XFRM=y

Include network QoS scheduling modules. ~0.2MB

CONFIG_FIRMWARE_INCLUDE_QOS=y

Include IMQ module for shapers (a bit of performance degradation). ~0.02MB

CONFIG_FIRMWARE_INCLUDE_IMQ=y

Include IFB module for shapers. ~0.03MB

CONFIG_FIRMWARE_INCLUDE_IFB=y

Include IPSet utility and kernel modules. ~0.4MB

CONFIG_FIRMWARE_INCLUDE_IPSET=y

Include NFSv3 server. ~0.6MB

CONFIG_FIRMWARE_INCLUDE_NFSD=y

Include NFSv3 client. ~0.5MB

CONFIG_FIRMWARE_INCLUDE_NFSC=y

Include CIFS (SMB) client. ~0.2MB

CONFIG_FIRMWARE_INCLUDE_CIFS=y

Include Shortcut Forward Engine

CONFIG_FIRMWARE_INCLUDE_SHORTCUT_FE=y

Включить сборку бэкпортированных драйверов для медиа устройств

#CONFIG_FIRMWARE_ENABLE_BACKPORTED=y

Поместить бэкпортированный драйвера в образ прошивки

(в противном случае они будут собраны в отдельный архив для размещения в /opt/lib/)

#CONFIG_FIRMWARE_INCLUDE_BACKPORTED=y

############################################################

Userspace configuration

############################################################

Include WebUI international resources. Increased firmware size

#CONFIG_FIRMWARE_INCLUDE_LANG_BR=y
#CONFIG_FIRMWARE_INCLUDE_LANG_CN=y
#CONFIG_FIRMWARE_INCLUDE_LANG_CZ=y
#CONFIG_FIRMWARE_INCLUDE_LANG_DA=y
#CONFIG_FIRMWARE_INCLUDE_LANG_DE=y
#CONFIG_FIRMWARE_INCLUDE_LANG_ES=y
#CONFIG_FIRMWARE_INCLUDE_LANG_FI=y
#CONFIG_FIRMWARE_INCLUDE_LANG_FR=y
#CONFIG_FIRMWARE_INCLUDE_LANG_NO=y
#CONFIG_FIRMWARE_INCLUDE_LANG_PL=y
CONFIG_FIRMWARE_INCLUDE_LANG_RU=y
#CONFIG_FIRMWARE_INCLUDE_LANG_SV=y
#CONFIG_FIRMWARE_INCLUDE_LANG_UK=y

Include NTFS-3G FUSE driver (instead of Paragon "ufsd"). ~0.4MB

#CONFIG_FIRMWARE_INCLUDE_NTFS_3G=y

Include LPR printer daemon. ~0.12MB

CONFIG_FIRMWARE_INCLUDE_LPRD=y

Include ASUS/Eltima USB-over-Ethernet printer daemon. ~0.05MB

CONFIG_FIRMWARE_INCLUDE_U2EC=y

Include USB-over-IP daemon. ~0.05MB

#CONFIG_FIRMWARE_INCLUDE_USBIP=y

Include "tcpdump" utility. ~0.6MB

CONFIG_FIRMWARE_INCLUDE_TCPDUMP=y

Include "socat" utility ~0.3MB

CONFIG_FIRMWARE_INCLUDE_SOCAT=y

Include "ndisc6" and "rdisc6" utilities ~0.27MB

CONFIG_FIRMWARE_INCLUDE_NDISC6_RDISC6=y

Include "hdparm" utility (allow set HDD spindown timeout and APM). ~0.1MB

CONFIG_FIRMWARE_INCLUDE_HDPARM=y

Include "parted" utility (allow make GPT partitions). ~0.3MB

CONFIG_FIRMWARE_INCLUDE_PARTED=y

Include SMB (and WINS) server. ~1.5MB

CONFIG_FIRMWARE_INCLUDE_SMBD=y

Include WINS server only. ~0.4MB

CONFIG_FIRMWARE_INCLUDE_WINS=y

Include syslog for SMB and WINS server. ~0.3MB

CONFIG_FIRMWARE_INCLUDE_SMBD_SYSLOG=y

Include testparm for SMB server. ~0.2MB

CONFIG_FIRMWARE_INCLUDE_TESTPARM=y

Include FTP server. ~0.2MB

CONFIG_FIRMWARE_INCLUDE_FTPD=y
CONFIG_FIRMWARE_INCLUDE_FTPD_SSL=y

Include alternative L2TP control client RP-L2TP. ~0.1MB

CONFIG_FIRMWARE_INCLUDE_RPL2TP=y

Include EAP-TTLS and EAP-PEAP authentication support. openssl ~1.2MB, wpa_supplicant +0.04MB

CONFIG_FIRMWARE_INCLUDE_EAP_PEAP=y

Include HTTPS support for DDNS client. openssl ~1.2MB

CONFIG_FIRMWARE_INCLUDE_DDNS_SSL=y

Include HTTPS support. openssl ~1.2MB

CONFIG_FIRMWARE_INCLUDE_HTTPS=y

Include sftp-server. openssl ~1.2MB, sftp-server ~0.06MB

CONFIG_FIRMWARE_INCLUDE_SFTP=y

Include dropbear SSH. ~0.3MB

CONFIG_FIRMWARE_INCLUDE_DROPBEAR=y

Make the dropbear symmetrical ciphers and hashes faster. ~0.06MB

CONFIG_FIRMWARE_INCLUDE_DROPBEAR_FAST_CODE=y

Include OpenSSH instead of dropbear. openssl ~1.2MB, openssh ~1.0MB

#CONFIG_FIRMWARE_INCLUDE_OPENSSH=y

Include OpenVPN. IPv6 required. openssl ~1.2MB, openvpn ~0.4MB

CONFIG_FIRMWARE_INCLUDE_OPENVPN=y

Include StrongSwan. XFRM modules ~0.2MB, strongswan ~0.7MB

#CONFIG_FIRMWARE_INCLUDE_SSWAN=y

Include Wireguard VPN module and utilite

#CONFIG_FIRMWARE_INCLUDE_WIREGUARD=y

Include AmneziaWG kernel module

#CONFIG_FIRMWARE_INCLUDE_AMNEZIAWG=y

Include Elliptic Curves (EC) to openssl library. ~0.1MB

CONFIG_FIRMWARE_INCLUDE_OPENSSL_EC=y

Include "openssl" executable for generate certificates. ~0.4MB

CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y

Include xUPNPd IPTV mediaserver. ~0.3MB

CONFIG_FIRMWARE_INCLUDE_XUPNPD=y

Include Minidlna UPnP mediaserver. ~1.6MB

CONFIG_FIRMWARE_INCLUDE_MINIDLNA=y

Include Transmission torrent. openssl ~1.2MB, transmission ~1.5MB

CONFIG_FIRMWARE_INCLUDE_TRANSMISSION=y

Include Transmission-Web-Control (advanced WebUI). ~0.8MB

CONFIG_FIRMWARE_INCLUDE_TRANSMISSION_WEB_CONTROL=y

Include Aria2 download manager. openssl ~1.2MB, aria2 ~3.5MB

CONFIG_FIRMWARE_INCLUDE_ARIA=y

Include Aria2 WEB control. ~0.7MB

CONFIG_FIRMWARE_INCLUDE_ARIA_WEB_CONTROL=y

Include TOR proxy ~2.8MB

#CONFIG_FIRMWARE_INCLUDE_TOR=y

Include GeoIP database info for TOR proxy ~0.7MB

#CONFIG_FIRMWARE_INCLUDE_TOR_GEOIP=y

Include IPv6 GeoIP database info for TOR proxy ~0.6MB

#CONFIG_FIRMWARE_INCLUDE_TOR_GEOIPV6=y

Include OBFS4 for TOR ~6.1MB

#CONFIG_FIRMWARE_INCLUDE_OBFS4=y

Include Privoxy proxy ~0.3MB

#CONFIG_FIRMWARE_INCLUDE_PRIVOXY=y

Include DNSCrypt proxy ~0.5MB

CONFIG_FIRMWARE_INCLUDE_DNSCRYPT=y

Include Stubby DNS-over-TLS (DoT) ~0.5MB

CONFIG_FIRMWARE_INCLUDE_STUBBY=y

Include doh_proxy DNS-over-HTTPS (DoH) ~0.4MB

CONFIG_FIRMWARE_INCLUDE_DOH=y

Include Curl support ~0.15MB

CONFIG_FIRMWARE_INCLUDE_CURL=y

Include QUIC support in Curl, openssl 3.5 required ~0.4 MB

CONFIG_FIRMWARE_INCLUDE_QUIC=y

Include QUIC support in Curl using ngtcp2, openssl 3.5 required ~0.5 MB

#CONFIG_FIRMWARE_INCLUDE_QUIC_NGTCP2=y

Include other versions of openssl instead of the default 3.0

openssl 1.0.2u

#CONFIG_FIRMWARE_INCLUDE_OPENSSL_10=y

openssl 1.1.1w

#CONFIG_FIRMWARE_INCLUDE_OPENSSL_11=y

openssl 3.5

#CONFIG_FIRMWARE_INCLUDE_OPENSSL_35=y

Include WPAD support

CONFIG_FIRMWARE_INCLUDE_WPAD=y

Include compressed memory support

CONFIG_FIRMWARE_INCLUDE_ZRAM=y

Add adb package

CONFIG_FIRMWARE_INCLUDE_ADB=y

Include LUA support ~0.2MB

CONFIG_FIRMWARE_INCLUDE_LUA=y

Include EoIP Ethernet Tunnels over IP ~0.01MB

CONFIG_FIRMWARE_INCLUDE_EOIP=y

Include KMS Activation support ~0.06MB

#CONFIG_FIRMWARE_INCLUDE_VLMCSD=y

Include iPerf3 support ~0.13MB

#CONFIG_FIRMWARE_INCLUDE_IPERF3=y

Include NFQWS support ~0.1MB

#CONFIG_FIRMWARE_INCLUDE_NFQWS=y

Reduce trx image size

#CONFIG_CC_OPTIMIZE_FOR_SIZE=y

[github-actions]

Please read what a pull request is:
https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/about-pull-requests